Cannot log on to internet DNS problem: _
I have 4 desktops and a laptop. both are running windows vista 64-bit and a 32-bit vista, an another windows xp. The laptop is windows 7 32 bit. All the computer are related to a home network. My window problem 2 64 bit vista and the laptop does not connect to the internet. The vista 32 bet of the window and the window and the window xp. The wireless network card displays a green globe. I got a dns socket error message load. How to load dns management< our="" is="" there="" an="" other="">
This is the aspect of the sholud confoguration TCP/IP.
Compare the good thing with one that does not.
On the State of intellectual property.
TCP/IP and its variables usually look like this.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
Typical TCP/IP status looks like this.
http://www.ezlan.NET/Win7/status-NIC.jpg
Description is the data of the card making.
The physical address is MAC of the card number.
The xx must be a number between 0 and 255 (all xx even number).
YY should be between 0 and 255
ZZ should be between 0 and 255 (zz all the same number.)
The date of the lease must be valid at the present time.
* Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.
* Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.
--------------------------
Can you please send the information in the topics that are posted on the details screen (copy from the list below and paste it into a new message, type the information on your computer)...
Description...
Active DHCP...
IPv4 address...
IPv4 subnet mask...
IPv4 gateway...
Server DHCP IPv4
IPv4 DNS server
Jack-MVP Windows Networking. WWW.EZLAN.NET
Tags: Windows
Similar Questions
-
Could not connect to the internet, DNS problem
Problem with the DNS system solves not addresses
have tried the followingnetsh int ip reset
netsh winsock reset
netsh interface ipv4 reset
netsh interface ipv6 reset
ipconfig/flushdns ipconfig/release ipconfig/renew
dns (8.8.8.8, 8.8.4.4) google DNS change
in the dsl router dns change
tried to reinstall google chrome
Internet works on internet explore x 64 only (built in IE8)
Update Internet Explore later, cannot access the internet now---------------------------------
Screenshots
---------------------------------
Digital ip = google.com 120,28 thingy
Can ping google.com on cmd and digital ip | http://i.imgur.com/cXD8hBD.jpg
tab of google chrome net internals events | http://i.imgur.com/wnfAEOX.jpg
Google.com Firefox | http://i.imgur.com/W9BhLDM.jpg
Firefox digital ip | http://i.imgur.com/I69LXd6.jpg
ipconfig/all | http://i.imgur.com/dA3I7gN.jpg
net internals chrome google dns tab | http://i.imgur.com/ediPJet.jpg
Google chrome net internals tab tests ip digital | http://i.imgur.com/pbI1Zze.jpg
test of google chrome net internals tab for google.com. http://i.imgur.com/WQ4rXCy.jpg
Google chrome google.com | http://i.imgur.com/hNFW3vm.jpg
running win7 ultimate x 64 sp1
AMD a4-6300 apu with 3.70 GHz graphics Radeon (TM) hd
4 GB OF RAM
I hope I gave enough information to answerAdobe Flash Player can be updated, BitDefender may be updated,
Applications can receive updated information but cannot update
It has been almost a week since the last response.I also disabled my Firewall
Edit = I accidentally fixed, I don't know how but my problem is now solved
-
Internet/DNS problems in a NAT Windows Server guest domain
Guys, I'm sorry if someone posted a similar question before, but I couldn't find everything concerning my problem using the tool of research or surfinf nets.
I have a domain controller Windows Server 2008 R2 running in a Vmware Workstation 7.1.6 / Windows 7 Enterprise x 64. I use the NAT option for the network, because I need to use this virtual machine to several different networks and a domain controller needs a fixed IP address. The DNS is correctly configured to forward and reverse and the nslookup returns the IP address and the host name of the guest.
The problem is that I can't connect to Internet in Virtual Machine, if I configure a fixed IP address (I am disabling the DHCP of VMware service at the moment). If I change in dynamics and start the VMware DHCP service, I don't have any problems.
I looked at the gateway, the DNS and the mask subnet values provided by the ipconfig/all command when the server uses a dynamic address and the server if setuped values of static. It did not work.
Anyone have a tip for this desperate man?
Because the domain controller is also running the DNS server, I guess that DNS serer entries in the client IP settings point to the guest himself!
If you are able to ping to Internet addresses by its IP address, you may need to configure the DNS server on the domain controller to transfer DNS queries for other areas to the (usually 192.168.xxx.2) NAT gateway for proper name resolution.
André
-
Hello.
I use a Toshiba laptop with Windows Vista Home Premium 64-bit.
I just have a modem and use a router. I have a network cable (cat 5) connected to my laptop and the modem. I have log-on internet and it connects. But when I open Google Chrome, IE9 or Firefox I can not load a web page. Google mentions something about the DNS cannot be found and DNS_Probe_Finished_No Internet.Frefox says server not found.
I click on the Menu start - Connect To - I am logged in. I already typed my password in the command prompt and appropriate the pppoe connection/address (I use ADSL).
I talked to my ISP and we tried to do certain things. But nothing works. On their end, it shows that I am connected. But I can't browse the internet. We tried to have the DNS and IP address for ipv4 set to obtain automatically and I put 2 numbers of DNS in manually once the settings have been changed to the favorite servers and DNS auxiliary, or worked.
Using command prompt, the DNS has been emptied. It did not help. The modem has been reset the ISP location. I also recreated and set up a new network connection.
My office is using the same pppoe information. I can freely browse the internet and I use Windows Vista Home Premium 32-bit. I was also shown to be connected simultaneously with both machines, but that the Office can go.
I do not have Windows Update the laptop since on April 2016. It has not been used and the battery was empty. I tried to turn off the laptop several times, but nothing works.
Y at - it suggestions to solve this problem? At that time perhaps a re - install will work.
System Restore worked. I will run the updates and see what happens.
I think it was a program that I uninstalled in programs and features.
It's also useful information for this post: https://answers.microsoft.com/en-us/windows/forum/windows_7-networking/unable-to-connect-internet-dns-error-windows-7/72040e27-7a87-4f6f-88d6-9d158da38de8
1.
Note
You must open a command with elevated privileges prompt to complete the following steps. For more information, see command prompt: frequently asked questions
Click the Start button.
In the search box, type command prompt.
In the list of results, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
At the command prompt, type ipconfig/flushdns.
2.
Start - Search programs and files
Type "Command Prompt".Right-click in the program file that appears above the run as administrator.
ipconfig/flushdns
ipconfig/registerdns
ipconfig/release
ipconfig / renew
-
Cannot communicate with the first DNS Server (169.126.63.1)
Hello
I have recently had problems with my internet connection and therefore cannot get on the internet at my place when it used very well. I have a wired connection usually, but tried to install a router but now even the wired connection doesn't work and I get the message "Cannot communicate with the first DNS Server (169.126.63.1)" I tried many things and even reformatted my hard drive, do a reinstall system, different setting reset and still it does not work. Hope someone can help me in this situation. Thanks to a bouquet.Here is my information
Hello
1. have you done any software or hardware changes to your computer recently?
To work with this issue, I would say that you try the methods below to resolve this issue.
Method 1:
The problems of Internet connection
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
Method 2:
Step 1:Let us reset TCP/IP and check.
To reset TCP/IP stack to go to this article and follow the instructions.
http://support.Microsoft.com/kb/299357Step 2.
1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
2. make sure that you are in the installation - basic configurationcategory.
3. scroll down until you see "DHCP Server"- if it is disabled, select 'Enable'.
4. enable DHCPif you want, you can change the number that starts the DHCP IP setting. (This is optional)
5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
6. scroll and click ' Save Settings '.Step 3.
1. click Startand then clickControl Panel.
2. go in network and sharing Centerand then click onchange adapter settings.
3. right click on Local area connectionand selectProperties.
4 Select Internet Protocol Version 6 , and then clickProperties.
5. click on get automatically a DNS server address, then pressOk.
6 select automatically an IP address to get.
7. repeat the steps for Internet Protocol version 4 as well.Also visit these links:
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsNetwork adapter problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
Hope the information is useful.
-
cannot log in to Firefox v. 12, but with c. 11 can connect
I've recently updated for Firefox c. 12, and I can no longer connect to our Web site. I went through all the steps of https://support.mozilla.org/en-US/kb/Cannot%20log%20in%20to%20websites?e=es & as = aaq
but in vain. Still cannot connect. He had no problem with the previous version of Firefox. The server log indicates only that an attempt to open a session was made, but not completed. There are no errors.I modified the code of our /modules/basex/ext-basex.js after the suggestion of one of the Mozilla developers who worked on the bug I posted.
Source file: http://hudesktopdevel.hucompute.org/modules/basex/ext-basex.js
Online: 1010
> ('timeout' r) & & (r.timeout = callback.timeout);
It should be something like:
options. Async & & (r 'timeout') & & (r.timeout = callback.timeout);This solved our problem! Connection now works 12 Firefox, and he continues to work in other browsers. Perhaps, this can be the suggested fix for Extjs 3 users who have problems connecting with Firefox 12.
-
Airport Extreme and Cox Internet IPv6 problem
This is one notification to others as well as a question:
I have Cox Cable high speed Internet in several places using an Airport Extreme 3 GB connected as a router to the modem cable Cox.
For more than a week, we would find regularly in the morning that the outside connection to internet DNS servers were lost. We called Cox several times and they have done the usual reset of the router and the modem and things seem to work for some time. But the next day again.
They came out and replaced the connections, I I had to buy a new cable modem and I replaced a digital switch. Every time things seem to work for some time.
I thought to replace the Airport Extreme (I read others did in a similar situation without result).
After much frustration, I started looking for Airport Extreme and DNS and found similar stories.
After that several unproductive calls with Cox Internet of first level support, I finally reached a level which acknowledged that Cox was the IPv6 deployment and he was having a problem with Airport Extreme routers. They said Apple was working on it and gave me a number to call for support from router from apple. Unfortunately the number they gave was no longer valid.
I persisted and finally got the Apple support and indeed they knew the problem and said Cox was working on that... But there was a temporary problem - and that was to disable iPv6 on the airport extreme (more precisely (internet > Internet Options > configure Ipv6: link-Local only).)
For now it seems to have stopped the decline during the night which seems to happen between 12:00 and 02:00. By experience, I do not think that its really a problem of compaibility IPV6, but how the router meets some kind of rebate to zero/test signal signal service is done in early morning.
So the question is - does anyone know with certainty what happens or who really works on this. From my point of view, both sides think it's the other problem. BTW - I've read about other people with Non Apple routers running after something similar.
GABarber,
I also had a similar problem. Prior service of Cox Communications in Phoenix AZ has been rescinded and recently restored (March 1) yesterday afternoon. After the departure of the technician, the wi - fi failed to produce a valid connection, citing DNS error and no response from the server. We have a new modem, CISCO, at an Air Port/Time Capsule 2 TB ethernet cable.
After talking with support for level 2 level 1 and then Cox, there was sufficient evidence for a correct signal via the modem, but the Port of the Air was not picking up or he issued (by Cox). Check my Air Port Utility apps on iMac and iPhone shows a signal Internet or Air Port casual, but never the two together. The modem and the Air Port so would show appropriate green led lights up, but in vain to work wi - fi.
The only thing that has worked so far is your solution listed above: Air Port utility > Internet > Internet Options > configure Ipv6: link-Local only.
Thank you, GABarber.
-
When the screen saver is used and the user returns to open a session.
they get...
This workstation is in use and has been locked.
The workstation can only be unlocked by user123 or an administrator.
Press CTRL + ALT + DELETE to unlock this workstation.user123 cannot log back in. unless he made a system admin an administrator connections or user must reboot the machine to reconnect.
Hello
-Is the computer connected to a network domain?
Please follow the steps mentioned below and get back to us with the results.
Cannot lock a "locked" computer administrator.
http://support.Microsoft.com/kb/242917
Registry warning
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/)
How to back up and restore the registry in Windows
For more information, see the link below.
Information about unlocking a workstation
http://support.Microsoft.com/kb/281250
If the computer is connected to a domain, I suggest you to post your questions in the TechNet forums.
http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
I hope that helps!
-
My office cannot connect to the internet
My office is unable to connect to the internet and keep giving me an error 12007. How can I fix it?
Hello
What is the exact full error message?
I suggest you try the procedure described in the following article and check the status of the issue.
How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista?
http://support.Microsoft.com/kb/811259
How to solve the possible causes of Internet connection problems in Windows XP?
http://support.Microsoft.com/kb/314095/en-us
"Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer.
-
original title: log question.
When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out. How can I fix?
Hi KERRYYX,
- Did you the latest changes on the computer?
- When was the last time it was working fine?
- You have security software installed on the computer?
- What is the full error message that you receive?
- Are you able to restart and shut down the computer?
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
You cannot log off, restart or shut down your Windows XP-based computer
-
Cannot download missing tools, internet option inactive and files missing in ie8 not allowing not uninstall - help
Hi RandyRawlinson,
1. did you of recent changes on the computer?
2. What is the full error message that you receive during the uninstallation of internet Explorer 8?
3. do you have security software installed on the computer?
4. what happens when you try to download anything using internet explorer 8?
5 do you have other options available on the bar menu of internet explore?
I suggest that you put the computer in a clean boot state and check if the problem persists.
It is possible that some third-party programs installed on the computer is causing the problem.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
If you still want to uninstall internet explorer 8 from the computer then refer the below Microsoft article and try the steps mentioned, check if it helps.
How to uninstall or remove IE as a troubleshooting step?
http://support.Microsoft.com/kb/957700
I would also say that you scan the computer for infections of malware or viruses using below online virus scanner.
The scan below only works on the 32-bit version of Windows
http://OneCare.live.com/site/en-us/default.htm
You can use the Microsoft security essentials to scan your computer
-
Windows XP Professional help... Cannot log on to windows.
Help! Thanks for the reply... but it is all foreign to me... I bought the computer from a former place of work so did not any windows disk. I was unable to move forward on a blue screen that reads: a problem has been detected and windows has shut down to prevent damage to your computer. If it is the first time that you, ve seen this stop error screen restart your computer. If this screen appears again the following steps. Disable or uninstall the anti virus, the fragmentation of the disc or utility backup. Check your hard disk configuration and search for updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical information STOP: 0 x 00000024 0 X 00190203 0X82F42108 0XC0000102 0x00000000
Can't do everything above that cannot log on that I think I should do... but not sure that I am not IT savvy. I've tried rebooting and without success.
This basically means that I have to get the windows disc and reinstall? If so what do I lose all my docs photos etc... etc... th the computer?
Forward the response and thanks in advance.
Pete
When you start windows, before the XP loading screen is displayed, press F8, and then select Safe mode. See if you start a computer desktop, if it isn't you can run chkdsk /f in command prompt.
If you cannot start in safe mode, you will need to reinstall (or try a repair installation) and Yes, you will lose this data, although there is a way to back it up. You will need to download ubuntu and burn it on a cd and backup to external media.
-
I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now. When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc. The itunes gives error me is "make sure that your network connection is active and try again. When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed). I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks. The help and support center will not be to the point after that I click on it. I use windows xp sp3 home edition 2002. I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success. I don't know what to do at this point but to restart the system. Please help, any suggestions? Thanks in advance.
Hi unlucky2013,
Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
WAG-120N and static ip - wireless and wired clients cannot connect to the internet
Greetings,
I use the N WAG-120 AP and switch for 3 computers laptops and 2 Office. Our Department is assigned only a what IP static of our server, as well as a pc can connect to the server and the internet. I use the first lan port of the 120N Wag as a WAN port and I attribute the static IP address, and the subnet, default gateway, and DNS addresses. Connected clients receive an ip address from the DHCP (192.168.1.10x) router, but cannot connect to the internet. How can I configure my router to allow clients to connect?
Thank you in advance!
The default LAN IP of the WAG subnet is 192.168.1.0/255.255.255.0 belongs to 192.168.0.0/255.255.0.0. This means that 192.168.1.0 IP addresses exist side WAN and LAN of the WAG. What makes this configuration completely cannot be routed.
Change the address LAN IP of the WAG to an IP outside the corporate network, for example using IP addresses private 172.16/12, for example to set the address LAN IP 172.16.1.1 with 255.255.255.0 subnet mask.
The alternative would be to use the WAG as a point of easy access only, and not as a router. However, due to the 255.255.0.0 subnet in your network company you will not be able to access the web interface except from an IP address corresponding to the LAN IP address subnet of the WAG. Of course, this does not affect the wireless or wireline customers connected to the WAG...
-
Windows vista sys. error message says need to adobe flash player 9.0 or later. I have this already. cannot run videos from internet
Hello
This can help you:
Download and run the Flash Player Uninstaller, as Flash can get damaged.
http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html
Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:
http://get.Adobe.com/flashplayer/?promoid=BUIGP
If the problem persists, you may want to ask in the Forums of community Flash Player:
http://forums.Adobe.com/community/flashplayer
See you soon.
Maybe you are looking for
-
You have more than 50 users of training for us? We need help :-)
My age group is not as tech savvy as younger generations. We want to know how Mozzilla everything it can be, but don't really know how. Y at - it training to get up and go? It looks great, but cannot not quiet getting my head around how it can be cus
-
Satellite Pro M70-275 - where is the lid switch?
Hei, I have problem with backlight in my laptop (Toshiba Satellite Pro M70-275). I think that the problem will be solved completely if I find where is the button of the cover. I hope someone can help and guide me to the location of the switch. THX
-
Search for Time Machine does not work in the mail.
Hello I'm trying to retrieve/view old e-mail my Time Machine ups back. I am backup on an external hard drive. When I get TM since the Mail, search application 'in time' does not work. If I go TM said Finder, or from the desktop, it works fine. I had
-
trouble opening explorer, google and other web siteis I need to speed up computer On the desktop high explore takes a long time to open and others
-
When I want to play solitare on my start the screen menu is up but not cards. All the answers?