Restart the services of dimension without disturbing the live system

Similar Questions

• How to load DLLs passwordFilter customized without having to restart the server system.

  Hi all

  I created the CustomPasswordFilter.

  I'm CustomPasswordFilter.dll the System32 folder copy and do a registry entry to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa" update the value "Notification Packages".

  I want to CustomPasswordFilter.dll to work without having to restart the server system.

  Is it possible?

  Concerning

  Ashish

  Hi Ashish,

  You can ask your question in this link for better assitance:

  http://social.msdn.Microsoft.com/forums/en-us/category/windowsdesktopdev

  Also refer to:

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/ms721766 (v = vs. 85) .aspx

  It will be useful.

• Why need to restart the computer 2 x front can launch Thunderbird?

  When 1 computer startup, thunderbird says not responding do not.

  can not launch internet explore also.

  reboot again both can launch...

  using Windows vista.

  no problem when 1st installed.

  can use for a few months.

  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• 11 - k000na: problem of restart of the operating system after disk erasing

  Hi there are members of the HP support forum!

  I bought my product, the HP Pavillion 11-k000na, in October of last year and around in time to March this year, I found the speed of the computer to be really bad, so I decided that I do a disk cleanup and restore the computer to factory settings I've done. Restart the computer, I discovered that something has gone wrong and after many failed attempts I could not restart the operating system.

  Time and time again, the laptop gives me the same error - message

  Error code 0 xC0000001

  When I bought the computer it came installed with windows 8 and I've quickly updated to windows 10, would be the problem that when I restored it to factory settings, it does not know how to restart now?

  Any help would be really useful thanks!

  Oliver

  Hello

  On the upgrade of Windows 8 to 10, built in recovery partition got corrupted and will stop running more.

  How do you reset phone?

  Only I know is to order for your model of HP USB recovery. Or pure 8.1 Windows update install using Windows Media creation tool. Both methods retrieve product key of activation of the Board BIOS chip, automatically and be activated.

  Concerning

  Visruth

• Restart the necessary OS after install/uninstall program

  Hi good day, I see a problem, please give me a hand with it.

  why I need to restart the operating system (such as BONE pop up windows application) after installing or uninstalling a program, which is why sometimes 'sometimes '? instead of making the installation/unstallation every time? Thank you

  Hello Johnny you,

  Reset is a must when you try to install or uninstall any program on your computer. The changes take effect only if the computer is restarted. This restart of the computer depends on what program you are installing and UN-installing.

• Need help to diagnose the regular system analysis on iMac - processors maxed out

  I need help to identify the cause of a problem that occurs at least 2 - 3 times per day using my iMac (27-inch, mid 2010) running 10.11.5.

  I will use my iMac and then all at once things will start to really trolling. To the point of being completely unusable. Even if I'm able to move my cursor, then click to drag the windows around the screen nothing does really.

  I have iStat menus running so that can see graphics in my menu bar that all 4 cores are completely overfished. Occasionally, I was fast enough to launch the activity monitor to try to see what applications / services are responsible for, the use of % CPU column is completely empty of values, so I can't identify the culprits in a reliable way. I try to keep that column sorted by % CPU use in the hope that he could reveal something and normally it's the kernel_task who is up there.

  I use a Wacom Bamboo dated Tablet (MTE - 450 has) instead of a mouse, and at one point, I was convinced the pilot of PenTabletDrive it is based on was to blame. I contacted Wacom on this subject, and although there is no known issues they pointed out that although the latest drivers will allow me to use the tablet that they no longer support older devices. I was wondering if there was a problem of communication between the device and a driver that is no longer supported. I installed the latest driver supported for my tablet, but the problems persist.

  It may be interesting to note that, when my computer is in this semi-frozen state, I am able to launch the window enough force and quit all open applications leaving me with only the Finder. I guess that means that there are none of my apps running and it is probably one of the services. If I restart the Finder system grinds to a completely enclosed holt.

  I hope someone can let me know what I can find in the Console or elsewhere to help me finally zero in on what is to blame. I can share a log if that helps.

  Thank you in advance!

  Information that might be useful:

  Kept by I tend to be running: Adobe InDesign, Photoshop, Acrobat (all CC 2015), Mail, Safari with several tabs & Dropbox sync constantly.

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• I reinstalled the operating system on the same computer multiple times, however, this time it is said, I'm 'cannot be enabled.

  I have problems activating windows x 64 bits.

  I reinstalled the operating system on the same computer multiple times, however, this time it is said, I'm 'cannot be enabled. Recently, I updated my motherboard and changed to a quad core. I would appreciate help from the administrator. Legitimately, I bought my version of Vista x 64 tiger direct for years and relied on it as my OS for a while now. Any live medium or other assistance, advice, etc., would be appreciated. This operating system has been reinstalled several times, and the last time I had to reinstall it is because I closed windows because he wasn't updated correctly, and then restarting the operating system has not yet worked so I HAD to reinstall. Now windows says that my code is already used. I'm ready to take pictures, show my keycode and do anything to get my system online. Vista is saying I need to activate within 3 days. Also, I have problems installing Service Pack 1. Which maybe has something to do with my questions? Please, someone help me!

  Mark,

  In this case, you will need to contact Microsoft by phone for your landline number. Usually, most product keys have some time, they can be turned on before you reach this State.

  Best,

• Shared behavior of the virtual machine on the host system shutdown

  Shared behavior of the virtual machine on the host system shutdown

  Greetings,

  I installed WIn7 - 64 bit host system, WS8 and there seems to be a very nice and high quality configuration. I am very happy.

  There is a shared VM and it's a Setup 64-bit Ubuntu 10.04 Server functioning as a base configuration LAMP for some basic web applications, etc..

  I was unable to find the settings to control the behavior of the VM shared with the system that hosts stop. When I stop the host system, I believe that the common VM is off tension or stop gracefully, I don't know who. What I like best is for the shared VM will not apply instead. The reason is that starting the virtual machine is a bit complicated and requires manual intervention. Whereas, if it is stopped since a State suspended without manual intervention is necessary.

  I found that if there is a loss of power, I can hibernate the host system in time before my battery runs out. Resuming the host hibernate system works correctly and the VM shared within WS8 is back to its previous functional State.

  It would be nice and helpful being able to stop or restart the host system and know that the shared virtual machine has been automatically suspended. So now I have to log on to the user account from the host system and open WS8 and manually suspend the virtual machine before you stop or restart the host system.

  Is there a way to have the shared VM automatically suspended when the host system is stop?

  Thank you for your time and attention.

  You can configure the stop action by editing the following file:

  %ProgramData%\VMware\hostd\vmAutoStart.XML

  If you want to configure the action stop for all virtual machines, find the section of under the section. Change it on hold

  If you want to change the action stop for only this one machine virtual, you must first configure this shared VM to be started automatically (in WS, right-click on the item 'VMs shared' in the library, select "manage computers virtual auto-start '). After doing this, manually change the vmAutoStart.xml. Find the entry for the virtual machine in the section (if you have more than one computer configured to autostart virtual, it will take some more digging to understand what VM to change). Change the entry for this virtual machine to hang.

  Save the file. Reboot the host (not auto-start power actions are only made when the host is restarted). Now when stop you the host, WS should suspend the VM (s)

  As always, manually edit the configuration files is not considered supported its use. Save the file before you edit. Adjust at your own risk.

• I have Windows 7 and the 2007 Microsoft Office Suite Service Pack 1 (SP1) update always fails. Also Microsoft Office Outlook often does not open without having to restart the pc. ___

  I have Windows 7 and the 2007 Microsoft Office Suite Service Pack 1 (SP1) update always fails.  Also Microsoft Office Outlook often does not open without having to restart the pc.

  Hi hound3101,

  Welcome to the Microsoft Answers community.

  a. you are able to install some other updates?
  b. do you receive error messages when you start Microsoft Office Outlook?

  If you have a problem only in the Office Update installation, then I suggest you to report your problem in the Office Discussion groups. If not, try download office update from the link below and install it in clean boot mode.

  Link to the Group Discussion Board: http://www.microsoft.com/office/community/en-us/FlyoutOverview.mspx

  To enter the mode of clean boot of your computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after starting the computer, install the update.

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Restart Powerconnect 6248 without disturbing the Configuration

  I apologize in advance for the entry-level position and if that's the answer elsewhere, please point me in the right direction:

  I inherited load on a network LAG / VLAN with a central 2-battery Dell switch Powerconnect 6248 functioning as a main switch and routing of traffic between the VLANs that are shared it resources.

  I want to restart this switch without losing any configuration, because I'm just to enter this network, I don't want to disrupt or rebuild the configuration.

  I can get Telnet or SSH access to the switch but now use the GUI. When I go to reboot I choose to restart the two batteries and am met with the message:

  "The unit will restart with the startup configuration, not the running configuration. Do you want to continue? »

  I had a contractor separate network restart the switch before and I don't know if it simply ignored the message and proceeded. I would like to be able to restart this switch without losing any configuration.

  My question is, I'm ok to move forward through this error message? Or do I need to configure backup to restart? What is the best way to proceed with a simple reboot of two chimneys, while maintaining the current configuration.

  Here is the procedure, I suggest you take.

  -If the running configuration is operational and you want to keep on the switch, and then save it in the startup configuration.

  -before to restart, save the configuration.

  -Keep the battery restart.

  You can then use this backup config as a reference in case something happens to the configuration of the switch. It's a good idea to take the habit of saving after all change config, before the updates of the firmware, reboot, etc.

  Here is an article that will guide you through the commands to perform these actions.

  http://Dell.to/1NPR5aY

  Hope you find it useful.

• Deployment, redeployment JAR file for WebLogic EM without having to restart the service

  Hello
  
  Can someone help me how to redeploy the file .jar on weblogic EM with steps.
  Deployment, redeployment JAR file for WebLogic EM without restarting the server
  Appriciate if you provide information in steps with screenshot.
  Note: Not in the 11g weblogic console.
  
  Thank you
  Phani

  http://download.Oracle.com/docs/CD/E14571_01/core.1111/e10105/deploy.htm#BIHIIEIA

• Restart the application on windows server in datacenter information service.

  Disabled the service appinfo (he was operating at 80% cpu) and restarted by error. I can't find a way to restart the appinfo on windows server 2008:

  -safe mode is impossible because msconfig and bdedit do not work without appinfo

  -boot.ini does not exist on windows server.

  -regedit does not open without appinfo

  -sc config does not work without appinfo

  -analysis system, ditto

  Is is possible that simply disabling a service to completely destroy a windows server?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Restarting the Services WA

  I just wanted to check before I did it, I can restart the DRF on my CUCM 7.0 services without disrupting anything but straight backups? Work seems to be hung and I can't configure anything because it says that a backup is in progress, even if it is not.

  TIA,

  Matt

  Hi Matt,

  You can restart the two services without problem;

  restarting the service utils

  Cisco local WA

  Cisco WA Master

  See you soon!

  Rob

  "Every fool has a reason of Feelin ' sorry for him"-Springsteen

• View 5.2 - pools are not created until after restarting the service

  I'm having a problem from the point of view 5.2 where we create a pool (Win7/XP anyone) and after you click on finish, the pool never fills with VM, vCenter never shows something else that the folder being created. If you view the 'events' tab in the real pool, it shows that the VM delete no VM or replicas are created in vcenter or view. However, if you restart the login server service, the pool will begin and starts to create virtual machines without any problem. Only the first pool, we created worked, each pool created after had to have restarted service to create virtual machines. We can repeat it constantly. See attached picture for what we see in the events tab.

  The DB was out of sync so we ended up uninstalling replicas down to a primary and testing which was very good. We then reinstalled the replicas which in turn fixed the database so all is good. Thanks for the reply.

• no service to customer without having to pay when the product does not work?

  no service to customer without having to pay when the product does not work?

  You will need to tell us more of the history for anyone to be able to give advice. The WHOLE story would be great!