Similar Questions

• I need to stop windows to install the IR Transmitter/Receiver when I reboot so I can use the console for Fallout New Vegas

  To use the console or a cheat mode on Fallout New Vegas, I need to uninstall my infrared transceiver. When I do that, I have to restart the computer for the changes to take effect. Once I reboot, windows pops up a window saying that it has installed new drivers. Happens if fast, I can not open the game before the pilot completed the installation. Help!

  Hello

   
  If you want the windows do not install the infrared transmitter when Windows restarts you can remove the connection of the transceiver to the computer or try to disable it in Device Manager. You may consult:
  
  (a) open Manager devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  
  (b) search for the device transmitter/receiver IR, right click on the device and turn off.
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
   
  For more information about the game, I suggest you to contact game provider support site.
  http://fallout.bethsoft.com/eng/games/FNV-overview.html

• When I hit the + key for a new page, all my widgets have disappeared. All my sites are listed is no longer. How to re - install?

  I changed my search engine of Norton. Now when I click on the tab for a new page, it happens with search for Norton and I don't have my widgets with my sites. I have removed the research and tried everything to get widgets to my sites favorite on when I hit the sign '+' for a new page.

  Need help

  Check and see your current newtab setting:

  Type of topic: config< enter > in the address bar.
  If a warning screen is displayed, press the button to be careful .
  At the top of the screen is a search bar. Type browser.newtab.url
  This indicates what to show when a new tab opens Firefox.
  If you want, right click and select Edit. You can change the setting

  topic: Home (Default Firefox homepage),
  on: newtab (displays the more visited sites),
  Subject: vacuum (a blank page),

  or you can enter any web page or Subject: page you want.

  The same instructions are used to the new setting of the window, classified
  browser.startup.homepage.

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

• We have installed Office 2010 on a system that died & want to move the software for my new system. How to reactivate my product key Code

  We have installed Office 2010 on a system that died & want to move the software for my new system.  How to reactivate my product key Code

  Assuming that you had bought a copy of the sale at retail of Office 2010 (i.e., it not was not preinstalled by the manufacturer of the computer or downloaded and installed using a "product key card"), just install it on the new system and turn on normally.  In some cases, you may use telephone activation and explain the circumstances (i.e., the old computer is dead).

  Microsoft Office is not a step "off authorizes" as some other apps (Adobe comes to mind).

• I can't initialize the disk for my new external hard drive

  I can't initialize the disk for my new external hard drive because the drop-down list in the Disk Management Console does not give me this option. I'm logged in as an administrator and running Windows XP.  The driver for the new hardware is not digitally signed because I can't initialize the disk.  So I can't get my new hardware to run.  Does anyone have any ideas on how I can get the option "Initialize disk" in the Disk Management Console?

  Hello Honduras1,

  Can you simply right-click and format everything first?  The drive must be formatted before use, make sure that you format NTFS.

  See you soon

• I need to update the screenshots for a new version of an app existing Itune application to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  I need to update the screenshots for a new version of an existing iTunes Connect App asks me to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  You must call the assistance of the company and ask them to help you with this. You can find contact information by logging on http://digitalpublishing.acrobat.com/ and looking at the Middle at the bottom of the page.

  Neil

• Restart the disk for Satellite S1400-253 s

  My computer has been attacked by some virus hardcore, and so I decided to reconfigure my machine to start with a clean slate. However, I could not find the disc that came with my machine, because I recently moved to USA temporarily (and I probably forgot to bring with me, of course!) so I used my drive of roommates with windows, etc., that came with your dell computer.

  Needless to say that my computer is not a return to normal and claims that he doesn't have a network card, while he was perfectly able to go on the internet before.

  I tried to download the drivers from the site to the right of my pain, but nothing helped. Anyone know how I can get my hands on another drive to remake my machine, one that will have the drivers etc for my machine?

  Hello

  normally, if you install the drivers from the website of support in this order, the system should work:

  Windows XP Professional Edition
  SBSI (step by step interactive) V.3.5.23
  MS Java VM 5.0.3805
  Trident Cyberblade XP Ai1 V.6.4022 - 016 L .22ICD display driver
  Driver Audio WDM ALI V.5.12.01.5181
  Toshiba Software Modem driver SM31100ALL2
  Toshiba Fast Ether LAN Driver (Lavon) V.6.00
  Toshiba Wireless LAN Driver V.1.10.107
  SMSC IrCC NDIS Miniport Driver V.5.1.2500.0
  Toshiba utility
  Common modules V.5.02.00
  Toshiba PowerSaver V.5.07.01
  Utilities Toshiba V.3.02.07
  Toshiba V.2.01.261.1400 controls
  Toshiba V.3.00.02 Console
  Switch V.3.01.00 Network Device
  ALPINE slide Point Touchpad V.5.4.301.2
  Touchpad ON / OFF utility V.2.01.01
  TOSHIBA Hotkey utility
  to view devices V.1.00.01.00 - 02
  Installer of Manuel PDF Online V.5.02
  InterVideo WinDVD V.3.2B41.101
  Toshiba V.1.00.1121 skins
  Q307274 QFE shutdown
  SBSI QFE Q307460
  ICW QFE (QFE migrate.js) Q308131
  QFE Autolfn Q308387
  Console recovery QFE Q308402
  Q308677 update limited USER
  Update Package QFE Q309521
  Cannot view the files on aDisk QFE (select Bay QFE) Q311455
  Restart the time delay QFE Q311785
  Update (SLP RA QFE) Q311889 remote assistance
  OEM-specific update QFE Q312368
  Drive floppy USB Format error QFE Q312370
  QFE Q314412 user accounts administrator
  PNP buffer Upd QFE Q315000
  Unmtble BootVol Preinstall Upd Q315403
  Last good known Configuration QFE Q316246
  InternetExplorer6 QFE Q319182
  Drag ' n Drop CD V.2.00B2099a

  But you can also buy a new CD from recovery to a Toshiba service partner.

  Good bye

• Restart the error for Windows Vista with the recovery disk

  I bought a Toshiba Satellite A355D-S6889 about two years ago. It came with Windows Vista. I subscribed to Norton AntiVirus and it totally messed up the computer. We lived with a duration of 5 to 10 minutes from start-up. In addition, many programs crash and it takes a lot of time for anything to work. I decided to for a recovery and a restore using the disks provided with the laptop. I followed the instructions, but it keeps hanging up on the second disc.

  I tried to use a method that I found searching for forums (restart the computer by pressing '0', but I got lost on the loading cycle.) I'm not very strong programming and I guess when a CD provided by the company must be used for recovery, it should work.  All my programs were legitimate, I want just my OS back so that I can use my computer.

  Help, please. Thank you.

  I bought a Toshiba Satellite A355D-S6889 about two years ago. It came with Windows Vista. I subscribed to Norton AntiVirus and it totally messed up the computer. We lived with a duration of 5 to 10 minutes from start-up. In addition, many programs crash and it takes a lot of time for anything to work. I decided to for a recovery and a restore using the disks provided with the laptop. I followed the instructions, but it keeps hanging up on the second disc.

  I tried to use a method that I found searching for forums (restart the computer by pressing '0', but I got lost on the loading cycle.) I'm not very strong programming and I guess when a CD provided by the company must be used for recovery, it should work.  All my programs were legitimate, I want just my OS back so that I can use my computer.

  Help, please. Thank you.

  Hey stileaux

  each manufacturer has its way of using their own recovery process

  for the best support, please contact toshiba to the below link and ask them how to use their recovery process

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Walter, the time zone traveller

• How to save the password for a new ISP on my printer 5514?

  I recently changed my ISP and need to make a change to my printer HP Photosmart 5514.

  When I originally installed the printer on my laptop Windows 7, I've provided the network and password for the existing ISPS and they were saved during the installation process because I did not re - enter the password every time I turned on the printer to use.

  With the change to a new ISP, I used the wizard wireless on the printer to select the new wireless network and enter the password.  The printer worked fine, except that the network and the password was not justified.  Whenever I turn the printer off and then turn it back on to for reuse, I re - select the network and enter the password again.

  Y at - it of some sort that I can save the function/password without reinstalling the printer?

  Looks like the printer is still trying to keep the old network information.

  Try a Hard Reset:
  * Unplug the printer while the power is on
  Disconnect the other end of the power cord from the wall jack directly
  * Wait 30 seconds
  * Plug the unit back to

  Network information is reset by default:
  * Press on key/Setup menu in the top right of the touch screen of the printer
  * Select the wireless option
  * Scroll to default network

  After you restore the default settings, then try to run the Wireless Setup Wizard. Let me know if the unit still does not retain the information.

• Function Tare DAQ help and restart the service for the vi program

  Hello!

  I have a program that aquiers a signal sent by the DAQ Assistant. Here, I searched the Forum and on the web, but I can't find a way to implement a tare function. The signal comes from a cell and therby it would be good that Icould tare the zero value signal. In the DAQ Assistant I can calibrate it manually, but I would like to wire this function to a button.

  Also I have another problem that should not be difficult to solve, but I am struggling with it. I want a service resert my labview code so that I can restart the program from the beginning. I used a normal structure and restart an enum constant and weird via a tunnel. But it doesn't seem to work. Instead of reset the program it only stops it

  I have attached my code below.

  Best regards Maurlind

  
  

• HP Laser Jet MFP M177fw: Impossible to install the software for my new printer

  I just bought this printer yesterday and have worked all this time, trying to get the software installed.   I used the CD that came with the printer.  I used the software online and the wizard to download and install.  I went through many forums here and troubleshooted with everything I saw.   I get the error message cannot install message.

  I am frustrated at something so simple in the past became a chore.   I only use HP products for my scanners/printers and I fear that my next step may be to pack up this unit and take it back to the store for another brand.

  Help, please.

  I finally managed to install my software.    I have download an other registery cleaner and found more stragglers and I found about 5 gig in addition to free on my main partition.   I suspect that the limitations on my hard disk partition may have contributed to the inability to install software.   However, I did so many steps, so I'm not sure that you allowed me to complete the process.  But there was something different and who has been installing the update of the firmware that was on the page of the software product and the drivers.    Thank you for your help and support.

• Do LOV for validation of the fire for a new field made by customization

  People,
  
  Module:-Iprocurement
  
  page:-/ oracle/apps/icx/por/req/webui/CheckoutLinesPG
  
  How can I do LOV to validation the fire of a new field that was posted (rendered) customization.
  
  The LOV / MessageLovInput element is already there.
  
  I tried to adjust the same view object attribute information instance and view to the messageLovInput as the field but that doesn't seem to work, but I could make a mistake here.
  
  Can someone pls advise.
  
  Thank you
  Regis

  I think that it is the default functionality in LOV. What is the problem you are having with this?

  If I read you correctly, you want whenever you enter data into the field of lov and tabs to LOV VO must be read with this particular search term.

  Thank you
  AJ

• restart the drive for vista

  I can no longer connect on my laptop at all when the screen actually him during the heat up to the point where he gave me a 3rd degree burn I keep antivirus on it and while it was under warranty I sent it in and they said nothing was wrong with her but he obv is for now I can not connect when t lights is no longer under warranty and I am very angry I guess I just need to reset completely to the top of my computure but vista is not equipped with a disc of resart. I despratly need this computer for school as soon as possible so please help!

  Overheating can cause sudden stops of your machine.

  If a laptop, make sure that the vents are regularly cleaned of dust, etc..

  Also make sure that the laptop is in a well ventilated area, not used on the bedspreads, blankets, etc.

  You can buy cans of compressed air to clean computers at most computer stores.

  And make sure that the fans are working properly.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  See you soon.

  Mick Murphy - Microsoft partner

• Full cache of the body for Smartphones New blackBerry Pearl 8110

  Hi all

  I used my Pearl for about 6 months now, I got from my cousin and had no protection on my phone. Because of this and my rough use togather, there are a lot of scratches on my phone and some cracks and bumps as well. Can someone help me get a new complete coverage of the body. Everything I find on the internet when I search covers is the doors of the battery or external rubber covers.

  I'm looking to replace the complete body of my Pearl, including side panels, the battery door and the front screen and the key board.

  Any help is appreciated.

  Thank you & best regards

  Check out www.cnn.cn

  and www.truesupplier.com

• Please help me to choose the material for my new computer

  I'm creating a new editing machine I want to use after effect, photoshop, flash, illustrator and 3ds max. I do a lot of animation 2d and 3d, video editing and graphic design.

  It is the system that I'm currently planing on building:

  Processor: intel core i7 2600 k (I'll be overclocking it to about 4.8 ghz)

  Motherboard: Asrock p67 extreme6

  Memory: G.Skill ripjaws x series 16 GB ddr3 1600 case latency 7

  Graphics card: Gtx 570

  Power supply: Rosewill bronze series 1000w

  Hard drive: 4 x Corsair F120 in raid 0

  Case: Bitfenix collosus

  CPU cooler: Noctua Nh - d14

  I have a budget of $2500 for this computer. I was wondering if anyone has any suggestions on things should change / recommend a completely different version for my budget.

  Also, I was wondering if the gtx 570 is a stupid choice and I should get a quadro 2000 instead. I don't do any game.

  One last thing, do 4 ssd in raid 0 helps not at all or should I just get 8 HDD in raid 10 or I should spend less money on hard drives.

  PS I know that the i7 2600 k was recalled but I'm in no hurry to build this computer. Also, feel free to recommend the hardware that has not yet been published, but will probably be in the next 8 months.

  PSS all programs I listed are CS5.

  Join all Todd and some things that I consider:

  Two processors will pack punch rendered, especially in your 3D work.

  Even if the 16 GB of RAM is generous, I would consider more.  Remember the rule: 2 GB for each heart of the processor, as well as some more BONES and other applications.  If you are using 8 cores/threads for rendering, 24GO would be optimal.

  While hard drives give an awesome performance in this config, there are a lot of money to spend on less than a terabyte of storage.  RAID 0 is also quite volatile, so be sure to run a regular and reliable backup system.

  For my money, I'd probably use a SSD a good size for a system drive, then 3 or 4 Classics (or hybrid SSD) drives for storage of media, with a decent RAID controller. You will get 3 times the storage at half price and are still quite zippy I/O speeds.