Full cache of the body for Smartphones New blackBerry Pearl 8110

Similar Questions

• Problems sync outlook blackBerry Smartphones and blackberry Pearl 8110

  I have a similar problem with my Blackberry Pearl 8110, Desktop Manager 5.01 and Outlook 2003 SP3.

  When I try to synchronize my contacts from my Blackberry to Outlook, the process gets thru 'Read in the device address book' 90 and 90 files without problem.  It starts the process following "Treatment Device Address Book" and gets 86 90 files and stops and a pop error message window: [title bar] Intellisync. It has a red circle with 'X' white and says "Unable to read data from application." with an ok button.

  I uninstalled Desktop Manager 5.01 twice, deleted the folder Intellisync following "KB11703" with no luck.

  In the Intellisync [C:\Documents and Settings\\Application Data\Research in Motion\BlackBerry\Intellisync] folder I found this file: PtTrace.log (see below):

  Tue Dec 08 22:10:40 2009 - Intellisync Log file.

  {22:10:40.593: create an empty table C:\DOCUME~1\SonicXP\APPLIC~1\RESEAR~1\BLACKB~1\Intellisync\{10A31DA6-8BF9-4767-9C2E-E4C4F4FF2310}. CFG\TABLES. ITB a.\startup.cpp line 500
  {22:10:40.609: empty table file C:\DOCUME~1\SonicXP\APPLIC~1\RESEAR~1\BLACKB~1\Intellisync\{10A31DA6-8BF9-4767-9C2E-E4C4F4FF2310}. CFG\TABLES. ITB a.\startup.cpp line 519
  {22:10:42.656: create an empty table C:\DOCUME~1\SonicXP\APPLIC~1\RESEAR~1\BLACKB~1\Intellisync\{C0116ED9-D020-4BF3-A38E-08A5B02C2528}. CFG\TABLES. ITB a.\startup.cpp line 500
  Tue Dec 08 22:10:44 2009: error 0 x 83110005.-2096037883.0 a.\syncconfigmanager.cpp line 1137
  Tue Dec 08 22:10:45 2009: error could not load CXLServer1.dll in the product directory... 4005.\callback.cpp line 3610
  22:11:07.343:
  22:11:07.343: start Session ILX, Source = Microsoft Outlook, target device =
  22:11:07.359:
  22:11:07.359: from Standard synchronization
  22:11:07.406: Phase = 10, user = XXXXXXXX: reading data from the device address book
  Tue Dec 08 22:11:18 2009: error could not retrieve the field on the device.4238 to the RIM: DeviceIConnector.cpp line 780
  Tue Dec 08 22:11:18 2009: error 4018.4018 to la.\sdk_data.cpp line 2494
  Tue Dec 08 22:11:18 2009: error 4018.0 on line 208 de.\cilfield.cpp
  Tue Dec 08 22:11:18 2009: Birthday.4018.0 error at line 463 la.\cilrec.cpp
  Tue Dec 08 22:11:18 2009: error 4018.0 to la.\ciltrans.cpp line 589
  Tue Dec 08 22:11:18 2009: error 4018.4018 a.\ilx_sdk.cpp line 256
  22:11:18.625: translation unit status: user = XXXXXXXX, rc = 74, Phase = 10, TrErr = 4018, SysErr = 0 to the 596 ligne.\xlatev3.cpp
  22:11:18.640:
  22:11:18.640: end of Session ILX, time = 11,000 seconds

  Don't know what to do, I hope I don't have to do a factory reset on my phone.  ANY HELP WOULD BE GREATLY APPERICATED! Thank you!

  Anthony

  [It was an original message on 03/03/2009 and I still have the same described problem above.] sdgardne replied to my post:

  Try the steps in this KB:

  • KB02048 "Unable to read application data" error when configuring or synchronization of data from the organizer with BlackBerry Desktop Manager

  Honestly, it sounds like a bad record... If you can refine what folder and delete it, maybe then things move on.

  But the KB02048 is therefore more accessible because RIM has either deleted from the Knowledge Base or?

  Help! I STILL NEED HELP WITH THE QUESTION, I WAS NOT ABLE TO SYNC MY CONTACTS FOR OVER A YEAR NOW!

  I couldn't find a solution for this, ANYWHERE so I just decided to fix this problem just upgrade to the new version of the BlackBerry Desktop version 6.0.0.40 software. And now, ALL my contacts synchronize with a problem.

  Also from the beginning of this problem and now I have also improved my Outlook 2003 to 2007 and then to 2010.

  So I do not know if the combo of doing all this software update fixed the issue of the contact crupt but its market not now and that's what I need.

• Use of Smartphone unlocked blackBerry PEARL 8110 in Europe

  AT & T gave me an unlock code for my Pearl a few years ago upon request.  I've never used to unlock the phone, because I went to another telephone shortly after.  The Pearl was just sitting and wait until yesterday when I used the MEPD method to unlock the phone.  I think I've succeeded.  Under 'Advanced Options/SIM Card', everything is indicated as "disabled".  However, it is also said to 'no SIM card valid', and on the main screen, it says that "initialization failed", as well as the AT & T logo.  The phone is apparently connected to the AT & T network, but allows only 'emergency calls '.  The SIM card, I have used over unlocking is a European pre-paid card.  Of course, they have no coverage here, so I do not expect to be able to use the phone with the SIM here.

  I plan to travel to Germany next week and to use the Pearl out there.  I don't just want to use my other phone out there (locked to AT & T) and pay their horrendous roaming charges.  Since I've never done this before, I want to assure you that I did really well.  I don't want to leave the plane and be without a working phone.

  Does anyone have any advice/comments/suggestions?  Really unlock my Pearl for good?  What I have to use that particular SIM card or I can insert any other SIM card with service in Germany (I have a few others).  Is there anything else that I seemed not or should I do?

  Any help would be appreciated.

  If you wanted to test... here in the United States, borrow or guy a cheap Tmobile prepaid SIM.

  You should be fine.

• When I hit the + key for a new page, all my widgets have disappeared. All my sites are listed is no longer. How to re - install?

  I changed my search engine of Norton. Now when I click on the tab for a new page, it happens with search for Norton and I don't have my widgets with my sites. I have removed the research and tried everything to get widgets to my sites favorite on when I hit the sign '+' for a new page.

  Need help

  Check and see your current newtab setting:

  Type of topic: config< enter > in the address bar.
  If a warning screen is displayed, press the button to be careful .
  At the top of the screen is a search bar. Type browser.newtab.url
  This indicates what to show when a new tab opens Firefox.
  If you want, right click and select Edit. You can change the setting

  topic: Home (Default Firefox homepage),
  on: newtab (displays the more visited sites),
  Subject: vacuum (a blank page),

  or you can enter any web page or Subject: page you want.

  The same instructions are used to the new setting of the window, classified
  browser.startup.homepage.

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

• We have installed Office 2010 on a system that died & want to move the software for my new system. How to reactivate my product key Code

  We have installed Office 2010 on a system that died & want to move the software for my new system.  How to reactivate my product key Code

  Assuming that you had bought a copy of the sale at retail of Office 2010 (i.e., it not was not preinstalled by the manufacturer of the computer or downloaded and installed using a "product key card"), just install it on the new system and turn on normally.  In some cases, you may use telephone activation and explain the circumstances (i.e., the old computer is dead).

  Microsoft Office is not a step "off authorizes" as some other apps (Adobe comes to mind).

• I can't initialize the disk for my new external hard drive

  I can't initialize the disk for my new external hard drive because the drop-down list in the Disk Management Console does not give me this option. I'm logged in as an administrator and running Windows XP.  The driver for the new hardware is not digitally signed because I can't initialize the disk.  So I can't get my new hardware to run.  Does anyone have any ideas on how I can get the option "Initialize disk" in the Disk Management Console?

  Hello Honduras1,

  Can you simply right-click and format everything first?  The drive must be formatted before use, make sure that you format NTFS.

  See you soon

• I need to update the screenshots for a new version of an app existing Itune application to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  I need to update the screenshots for a new version of an existing iTunes Connect App asks me to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  You must call the assistance of the company and ask them to help you with this. You can find contact information by logging on http://digitalpublishing.acrobat.com/ and looking at the Middle at the bottom of the page.

  Neil

• Simulator for BlackBerry Pearl 8110

  Hello guys '

  I'm looking for BlackBerry Pearl 8110 Simulator.

  Free Simulator for BlackBerry Pearl 8110?

  I searched his Simulator, but I could not found.

  If you know the download link, please help me guys

  TNX'

  it comes to the JDE 4.5 and there is the stand alone sim card in section 4.5 version of the sims download area

• Restart the VI for be new Tx params?

  Hello
  I am new to the use of USRPs and have very little overall experience with Labview. I'm currently implementing frequency-hopping by the example of the transmitter of package USRP. I converted most of the transmitter to the constants options since I'm mainly interested in the frequency of change in appearance and included a button to change the frequency. The problem is that I need to stop and restart the VI for the USRP starts the frequency. I thought that there must be a way to reset the VI whenever changes frequency without having to manually stop/run, but so far I have failed to find it. Is there a way?

  Hey cynop,

  Thank you attach your VI.  The first property node that you have inserted, you don't need.  You can wire the frequency of your structure to deal directly at the entrance of carrier frequency of the niUSRP configuration Signal.vi.  The property node that is inside the loop, this is what you need to change the frequency on the fly.  When you update the control of carrier frequency on your façade, the frequency of the carrier of your USRP updates also.  One thing to note is that the indicator of frequency forced on the front panel will not update.  You can shoot on the frequency of the carrier under pressure inside the loop of this indicator to update.  I do not recommend to do it right.  The amount of time it takes the driver to query the device for frequency can be enough time to cause a buffer overflow error.

• Full encryption of the disk for Vista software

  I work for an agency of starting to require the use of the full encryption of the disk (CDSE) software. My laptop is currently using Windows Vista. How can I acquire and load a compatible FDES?

  John

  If you have the business version of vista (or its equivalent), it comes with a full disk encryption application called bit locker.

  "versions of Windows Vista enterprise-class also come with complete the BitLocker disk encryption (Note: BitLocker is available in versions of Windows Vista for Microsoft Software Assurance customers)." Like commercial software, BitLocker provides protection against the "oops" factor - lost or stolen systems. Windows Vista also supports encrypted file system, which offers additional guarantees against the internal threats that are more likely to result in a violation of real data, not just data disclosure-based regulation. "

  Read more here or here

• I need to stop windows to install the IR Transmitter/Receiver when I reboot so I can use the console for Fallout New Vegas

  To use the console or a cheat mode on Fallout New Vegas, I need to uninstall my infrared transceiver. When I do that, I have to restart the computer for the changes to take effect. Once I reboot, windows pops up a window saying that it has installed new drivers. Happens if fast, I can not open the game before the pilot completed the installation. Help!

  Hello

   
  If you want the windows do not install the infrared transmitter when Windows restarts you can remove the connection of the transceiver to the computer or try to disable it in Device Manager. You may consult:
  
  (a) open Manager devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  
  (b) search for the device transmitter/receiver IR, right click on the device and turn off.
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
   
  For more information about the game, I suggest you to contact game provider support site.
  http://fallout.bethsoft.com/eng/games/FNV-overview.html

• Problems of updating the app with a new BlackBerry ID token for the signature

  Hi all

  Since may 2014, I have an application that I update often... This may 2015 my BB ID token expired, so I created a new one with the same BlackBerry ID account, that I have used before. However, I am facing some problems to make a new update, I got the "file bundle (votre_nom) was rejected. Package ID is required for all .bar file. "If this is an upgrade, ID of Package must match the ID of Package original batch file."

  The thing is, my application has been signed with the same BB ID account and keep the same package name, as always.

  Circumvention of this topic (link here) say contact at BB Vendor Management Support to update my application, but is not guaranteed retain the same downloaded application to the BB world.

  My question is: if I generate a new BB ID token with the same account ID to BB, and I keep the same name of packgane, how can I do to update my application without losing my users?

  THX

  The account name or package BlackBerry ID has changed.  It is the only cause of this error.  Here's how you can verify that it has changed.

  1. Open your original BAR file with a utility like WinZip archives.
  2. Extract of the MANIFEST. MF file in the META-INF directory.
  3. Repeat this procedure with your new file BAR.
  4. Open the manifest files in a text editor.
  5. Compare package-author-Id and the name of the Package in the manifest.

  If the package-author-Id is different, the application was signed with a different account.  If the Package name is different, then that changed.

  If you find that package-author-Id has changed and you do not know what account has been used send me the package-author-Id in a private message and I can watch it for you.

• How to save the password for a new ISP on my printer 5514?

  I recently changed my ISP and need to make a change to my printer HP Photosmart 5514.

  When I originally installed the printer on my laptop Windows 7, I've provided the network and password for the existing ISPS and they were saved during the installation process because I did not re - enter the password every time I turned on the printer to use.

  With the change to a new ISP, I used the wizard wireless on the printer to select the new wireless network and enter the password.  The printer worked fine, except that the network and the password was not justified.  Whenever I turn the printer off and then turn it back on to for reuse, I re - select the network and enter the password again.

  Y at - it of some sort that I can save the function/password without reinstalling the printer?

  Looks like the printer is still trying to keep the old network information.

  Try a Hard Reset:
  * Unplug the printer while the power is on
  Disconnect the other end of the power cord from the wall jack directly
  * Wait 30 seconds
  * Plug the unit back to

  Network information is reset by default:
  * Press on key/Setup menu in the top right of the touch screen of the printer
  * Select the wireless option
  * Scroll to default network

  After you restore the default settings, then try to run the Wireless Setup Wizard. Let me know if the unit still does not retain the information.

• HP Laser Jet MFP M177fw: Impossible to install the software for my new printer

  I just bought this printer yesterday and have worked all this time, trying to get the software installed.   I used the CD that came with the printer.  I used the software online and the wizard to download and install.  I went through many forums here and troubleshooted with everything I saw.   I get the error message cannot install message.

  I am frustrated at something so simple in the past became a chore.   I only use HP products for my scanners/printers and I fear that my next step may be to pack up this unit and take it back to the store for another brand.

  Help, please.

  I finally managed to install my software.    I have download an other registery cleaner and found more stragglers and I found about 5 gig in addition to free on my main partition.   I suspect that the limitations on my hard disk partition may have contributed to the inability to install software.   However, I did so many steps, so I'm not sure that you allowed me to complete the process.  But there was something different and who has been installing the update of the firmware that was on the page of the software product and the drivers.    Thank you for your help and support.

• Do LOV for validation of the fire for a new field made by customization

  People,
  
  Module:-Iprocurement
  
  page:-/ oracle/apps/icx/por/req/webui/CheckoutLinesPG
  
  How can I do LOV to validation the fire of a new field that was posted (rendered) customization.
  
  The LOV / MessageLovInput element is already there.
  
  I tried to adjust the same view object attribute information instance and view to the messageLovInput as the field but that doesn't seem to work, but I could make a mistake here.
  
  Can someone pls advise.
  
  Thank you
  Regis

  I think that it is the default functionality in LOV. What is the problem you are having with this?

  If I read you correctly, you want whenever you enter data into the field of lov and tabs to LOV VO must be read with this particular search term.

  Thank you
  AJ