Restart the Windows Audio endpoint Builder Service?

Similar Questions

• No sound, cannot start Windows Audio Endpoint Builder service, RPC server not available

  I had the audio works fine, so I checked a few services that are sure to value manual, and now I have problems with my audio. I went to all the necessary services that should be started and all have the value automatic and running except for the Audio service of builder endpoint, windows audio service and service audio creative.

  When you try to start the audio endpoint Builder service windows I get error 1722: the RPC server is unavailable.

  I can't start the service windows audio either. I get an error 1068: the dependency service or group could start.
  I tried to change the local system account log in info and now I get a different error message: 1079 the account specified for this service is different from the account specified for other services running in the same process.
  I tried to uninstall my sound card drivers (creative audigy 2), my pilots on board her (AC97) then reinstalling both, no chance.

  I am running Win 7 Ultimate 64

  I am also having a problem with my USB keyboard goes dead. the backlight stays on, but none of the buttons will respond. I have to unplug the USB and use it to hold back in order to reinstall. It seems that if I do not use the keyboard for a while it turns off, but the lighting. I disabled in the power of USB energy saving profile, and the problem persists. My mouse does not turn, so I think it is not related to my power profile. It's a keyboard Saitek Gamers (USB).

  Any help would be appreciated.
  Thank you
  Alex

  ETA *.

  DCOM Server process Launcher started, automatic
  Plug-and-Play started, automatic
  Multimedia class Scheduler started, automatic
  Remote procedure call (RPC) started, automatic
  Windows Audio Endpoint Builder not started, automatic (error message 1722)

  Update #2 that I was able to get the right connection info to get rid of the error msg 1079.
  I typed in NT AUTHORITY\LocalService and left the empty password.
  now, I get the same msg of error as a generator of endpoint... RPC server is unavailable.

  Edit # 3
  I turned on the power and everything started working as usual.
  except that I still have the problem of keyboard.
  Thank you

  I guess the problem with the Windows Audio endpoint builder, it's that you have disabled the Windows on Windows 7 power management.  For some reason, the audio services cannot start if power management is disabled.

  I was going to install the software for my UPS APC power management and requires that the Windows power management is disabled.  I disabled the service and rebooted the system and noticed that the audio services is not started.  You try to start their hand gave the errors you mentioned.  When I started the service of power management, I was able to start audio services.

  Microsoft does not mark as services that depend on it, but there is a relationship.  I know that in Windows 7, which they said he optimized use of energy for the audio and I guess audio services are looking at power management to see what type of profile is in use.  Because power management does not work, it is unavailable and terminate the audio services.  Again, this is just a guess, and I can't find definitive answers to this topic.

• I have trouble with my Audio. Multimedia Audio endpoint Builder Services class Scheduler & Windows.

  0xc1 193 error: appears when I try to run these 2 services, Windows Audio needs these 2 services began so that audio windows can start up fix the Circle Red & White 'X' which appeared on my volume icon in the bottom right, so that my audio can work.

  Multimedia class Scheduler

  Path to executable: C:\windows\system32\svchost.exe-k - netsvcs

  Windows Audio endpoint Builder

  The executable path: C:\windows\System32\svchost.exe k LocalSystemNetworkRestricted

  The two executable path in Services' and the path of the Image in the registry editor "" are the same for the two Services above.

  I need to know how this can be fixed, and I tried to do a system update previous but without success, the restore has failed.

  Hello Canofolives,

  Please keep us updated on the status of the issue.

  Have you tried using all the advice in the previous post?

  Please refer to the suggestions of Vaseem Ahmed replied on January 20, 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/system-error-193-has-occurred-is-not-a-valid-Win32/be04aba0-AFC0-475e-A41F-ebc399318a5d

  Note: serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this helps.

  Thank you

• How to add the endpoint Builder service windows audio

  I can't start the audio endpoint Builder service windows because it is not in the services folder. How to retsore this service. Reloading windows has absolutely nothing. The windows Fix - It _ jack tool. I'm not interested in a solution for Windows 7, I am running XP

  AWE, that explains that.

  My 'Sounds and Audio Devices Properties' Panel is grayed out and I can't choose my new outboard USB sound card, my volume button is red x ed out.
  Any help?

• His problem Intermittent Sound-'Windows Audio Endpooint Builder fell down'

  I am running Vista Home Premium on an HP Pavilion DV2000. My sound is messed up. It sounds like you take a speaker wire that is loose on a speaker and move (its out intermittently). Help, please. I tried to install the new drivers (not uninstall and reinstall but went on HP, downloaded site and crushed the) and I tried the troubleshooting Microsoft online tools.

  I get an error message is the following: "Windows Audio Endpoint Builder crash", as well as the following:

  Signature of the problem:

  Problem event name: BEX

  Application name: svchost.exe_AudioEndpointBuilder

  Application version: 6.0.6001.18000

  Application timestamp: 47918b 89

  Fault Module name: ntdll.dll

  Fault Module Version: 6.0.6002.18327

  Timestamp of Module error: 4cb73436

  Exception offset: 00086e39

  Exception code: c000000d

  Exception data: 00000000

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Thanks for any help that anyone can provide.

  Erik

  You can try to remove all the current drivers first and then installing those latest. I suggest that also consult you the site Web of Conexant for latest drivers, as is the real manufacturer of the sound chip.

  If this does not help, you can also try to disable all audio enhancements, see:

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

• I need to restart the windows assessment services service to connect to localhost, whenever I start the client WAS

  A / installation ADK

  I need to restart the windows assessment services service to connect to localhost, whenever I start the client WAS

  Hello

  To improve assistance to this subject, you can ask your question in the technet forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Failed to start the Windows Audio Service on Local computer. Error 1053.

  Hello! Last week, I lost all sound elements. When you click the sound icon, I got the error 'there is no available active mixer device. To install mixer devices, go to control panel, click Printers and other devices, and then click Add Hardware . "I'm going through the Add Hardware Wizard, click on that I already added the material and select SigmaTel High Definition Audio Codec. It says "the device is functioning properly." According to Device Manager, the device is functioning properly. When I go to start, run, services.msc and try to start Windows Audio, I get "unable to start the Windows Audio service on Local computer. Error 1053: the service did not demand launch or control in a timely . »

  Can anyone advise me on what to do?

  Hello

  About the message you received, it is likely that your sound driver may be damaged. In this case, try to reinstall the driver.

  You can also go to the website of your computer manufacturer to get the driver. They should have ALL the drivers for your computer model. :-)

• The Windows Audio Service does not start

  I have no sound at all. Show my audio device is installed and working. I get a message that the Windows audio service and audio end point service Windows (I think (does not start.)

  Hi JamesSimpson11759,

  ·         What happens when you try to start the Windows Audio Service? You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  I suggest you to run the Microsoft Fixit and check if the problem still persists.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  You can also view the article mentioned for more information:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Let us know the results.

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• How do you get the Windows Image Acquisition (stisvc) service to restart?

  HP Pavilion DV6-2088dx running Win 7.0 64 Bit Ultimate

  When I try to restart the Windows Image Acquisition Service I get a message access denied (Services tab in the Task Manager) or an "error 1068: the dependency service or group could start" (in the Services window).

  Hello

  One thing to check is the following.

  Open windows control panel, open administrative tools, and then open Services.  Make sure that the following services (order of th specified below check them) are all showing that status = started and the Startup Type = Automatic

  Remote procedure call (RPC)

  Detection material core

  Windows Image Acquisition

  If you need to make a change to one of the above, just right-click the service and select Properties, and then in the drop-down list box next to "Startup Type", select automatic and click on apply to save the changes.  Then click on the Start button.

  Kind regards

  DP - K

• I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2

  Hi, I'm a newbie to Vcenter.  I just found out that I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2

  Hello Cy1989,

  Check the items below in your vCenter server.

  1. check that VMware VirtualCenter Server service is started otherwise starts pls start...

  2 Vefiry VMware VirtualCenter Management Web Services is started otherwise start pls start...

  3. check that the configuration of the ODBC Data Source (DSN) used to connect to the database for vCenter Server is correct.

  4 Vefiry database are running and all required database services are running...

• Cannot access the Oblivion cheat console, but I stopped the windows media center Receiver service.

  Hey, I tried to set up the console cheats for oblivion, but it does not work I followed the steps on how to stop the windows media center Receiver service, but even after that I stopped it it won't let me put up the cheat console. no idea what I should try next. ?

  Hi daking9002,

  To bring up the cheat console into oblivion, you will need to unplug the sensor remotely from the PC. Once it has been disconnected, the oblivion cheat console will come just as it would on any other PC.

  I also tried equipping my number 1 access key. It works very well now, I just press 1 and the console opens. To close simply press ESC twice and press 1 once the UN-equip the ring.

  You can also download: " http://www.tesnexus.com/downloads/file.php?id=13133 ."

  -It gives you an inventory item: "Ring of Console" problem solved. -

  QUESTMSG

• Base filtering engine service, I learn by Norton that the windows base filtering engine service is not running on our laptop.

  I was informed by Norton that the windows base filtering engine service is not running on our laptop.

  And I need to notifify you.

  The filter Base (BFE) engine is a service that manages firewall and Internet Protocol (IP, IPsec) security policies and implements user mode filtering. Stopping or disabling the BFE service will significantly reduce the security of the system. It will also result in unpredictable behavior in IPsec management and firewall applications.

  Firewall Windows depends on BFE works correctly.

  To find out if BFE is running on your system, click Start, and then type this command:

  cmd /k sc qc bfe

  Press {ENTER}

  If you receive the following error:

  [SC] OpenService FAILED 1060:

  The specified service does not exist as an installed service.

  It is generally the work of one or more malicious software. See this address for the explanation and information on how to restore the missing service:

  The motor filter (BFE) basic service is missing: why it is happening and how to restore:
  http://www.hageltech.com/blog/2012/02/07/base-filtering-engine-problems.html

  or you can download and apply the patch from BFE (#11) of this page service registry:

  Register various fixes for Windows 7/XP/Vista - the Winhelponline Blog:
  http://www.Winhelponline.com/blog/Misc-registry-fixes-for-Windows-7-XP-Vista/

• Installation of Boot Camp utility stopped working after that Win 10 Pro was made.  Installer got stuck on step 'realtek' audio  I restarted Windows, but Boot Camp does not resume or restart the Windows installation process-side utilities?

  How can I get the Boot Camp utility to install entirely in Win 10 Pro?  After winning 10 Pro was finished installing, the installation of Boot Camp process began but eventually got stuck at halfway through (for 20 minutes) on stage 'Realtek Audio.   A restart of Windows has not triggered a recovery or re-starting installation of the Boot Camp utility.  Windows, it works, but I have no utilities 'Boot Camp' and can not find any Boot Camp file stored on the side of Windows again.

  Please see Bootcamp 6.0 driver install interrupted for resolution.

• problem with the Windows Vista print spooler service, hp

  Ive just bought a printer hp deskjet 2050 all in one series printer j510, instillation goes very well until you connect the usb to the pc printer, then the next bit says sorry cannot locate the driver, so I try to download the driver from the Web site after that try again it says "the following questions have been detected. windows print spooler service. I have no idea how to get around this and annoyed the need the printer last night when I bought:(toute aide serait appréciée, nous avons essayé de passer sur le matériel et aucune imprimante n'apparaît, si nous allons ajouter une imprimante à travers cela ne fonctionne pas:()

  Hello

  1. you receive an error message?

  2. were you able to install the printer successfully on your computer?

  3. when exactly you receive the Windows print spooler service message?

  4. have you made changes on the computer before this problem?

  You can check out the following link and check.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems