Restore CD for XP in combination with double HDD on Satellite Pro P300

Similar Questions

• I want to build a pc for better video editing with the soft first Adobe pro and Adobe after effect. Should what kind of material I buy for it. If you suggest me pls.

  I want to build a pc for better video editing with the soft first Adobe pro and Adobe after effect. Should what kind of material I buy for it. If you suggest me pls. my budget is about $2500

  You will have problems in the construction of a 99 X system for this budget. You need 32 GB of ram if you do that will be a large part of the cost with DDR4 right now. If you have a room on the X 99 budget would certainly be the way forward. The 5960 X is the best processor out right now but $1100 will probably push your budget. The 5930 K would still work and a much better price for your budget. I suggest: 970GTX with this budget as well. Forget the Xeon V3. They are out of your budget and not worth the price with this budget in mind. You can get a system much better with the I7 Haswell E chips.

  Eric

  ADK

• Touchpad on Satellite Pro P300 does not work with Windows 7

  Hello

  Recently, I load Windows 7 (64-bit) on my Satellite Pro P300. I downloaded all the drivers for W7 64 bit and installed everything, fortunately, most of the time.

  The touchpad, however, is not completely functional. The upgrade page says to use the Vista drivers and did not provide any drivers for win7. Installing the Vista drivers didn't really go so well.

  In any case, the essential element of the missing features is this thing where you drag your finger up and down the right edge of the touchpad, and it scrolls for you. I can click and double click and move the slider. But I can't scroll. And it's such a pain with move the slider above the scroll bar of the application, with a big screen.

  Any help would be appreciated.

  See you soon
  '

  If I understand you right you are missing these additional mouse settings. Am I right about that?
  Which driver you have installed?
  Perhaps Synaptics driver?

• Satellite Pro P300-145 - sound of frying with my headphones

  Hello!

  I have a Satellite Pro P300-145 and today I started noticing a noise of frying with my headphones. I tested my headphones in a different laptop and they sound good and if I play the same files with my speakers it sounds good too so I was wondering if you knew what could be the reason.

  I have to say I kept the laptop doesn't work for quite a lot this weekend and he got more than warm so I dunno if that could be causing it in the first place.

  Thanks in advance for your help.

  Hi Andunemir,

  What operating system you are using? You use Windows or Linux?
  In addition, it would be interesting to know if this happens only with headphones/external speakers or portable speakers internal too. You can test this please?

  > I have to say I kept the laptop doesn't work for quite a lot this weekend and he got more than warm so I dunno if that could be causing it in the first place.
  The temperature of the laptop is enough depending on the applications that you are running. High CPU and graphic card use causes a higher temperature.

  But it s also advised to clean the system at any time using a jet of compressed air. This can blow the dust from the cooling fans and the laptop is much cooler after that. I do it every 3 months because I use my laptop every day. If I do that, I followed these instructions:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/forum.jspa?forumID=105]

• Satellite Pro P300 - 13 m - boot problem: black screen with 3 beeps

  Hello

  Satellite Pro P300 - 13 m, I bought a few weeks ago and in time, I had about 5 - 6 times the same rear screen when I tried to start the system. When he does this notebook gives 3 loud beeps (not sure what that actually means).

  When he does this I have to press the power button for 5 seconds and after several times doing this that it will show the Welcome screen toshiba... then sometimes it will automatically restart again and I get this annoying black screen again. Most of the time when I wait about 10 minutes and try to do as well the system starts as usual... Yes... very strange thing here.

  To be honest, I don't want to send the laptop for Toshiba once again, as I could use for my business...

  Then. What could this be? I've already updated the latest version of the BIOS.

  Thnx in advance

  Carl

  Hello Carl

  I have the Satellite Pro P300 (PSPC1E). I installed Windows XP Home edition and my Vista. Use the two operating systems with success and everything is OK.

  What operating system do you use?
  Have you noticed that on the first day?
  Your laptop is placed correctly on the desktop without cooling vents?
  When you start Notepad you see every time that Toshiba welcome screen?

• Satellite Pro P300 - his axe with Win XP installed

  Starting with Satellite Pro P300 with VISTA everything was fine including the sound.

  For other reasons, I'm back to Win XP and noise started to sputter and example music was chopped.
  After you have installed the latest driver everything was going well again, at least for a few days.

  The same error came once again, starting with a chopped sound when starting Win XP. Reinstall the latest version of the driver does not help.

  Is anyone able to give me a hint?

  Thank you
  Benjamin

  Have you checked the sound settings in Windows? Maybe there's something wrong.

  You have installed the latest driver on the Toshiba site?
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Try to listen to music with another player for example VLC media player.
  Make sure you have all the updates for Windows installed.

• The new use of recovery of Windows XP with my q Satellite Pro P300-19?

  I just bought a Satellite Pro P300-19 q with Vista pre-installed. I want to use Windows XP Professional instead and understand that I must use the DVD titled "Product development - Microsoft Windows XP Professional" supplied with the machine. To do this, however, the provided information sheet is not very useful when he says only: «you will have to load this...» »

  My question is: How do I do it from running the disc in the DVD player, just reveals several files which none will get me nowhere?

  Any help would be welcome.

  The recovery of Windows XP product disc contains an image of a Windows XP installation ready with all the drivers and tools.

  Before installing Windows XP, you should burn the Vista recovery disk because if you want to restore Windows Vista you will need this disc. So, you can restore the computer back to wherever it was when you originally received.
  So far as the recovery image (Vista) is only stored on the HARD drive and so you can burn it to a DVD:
  Click on the Toshiba recovery disc creator and insert a blank DVD. Then follow the instructions on the screen. The recovery disk will be created.
  You are now able to boot from this DVD and install Vista with all the drivers and tools (factory settings).

  When you reinstall Windows with a recovery disk, the HARD disk will be reformatted and all data will be lost. This means that as other partitions so backup your data first.

  If you are using Vista it s also able to restore the factory since the HARD drive settings. Therefore, the files are stored in the folder HDDRecovery.
  So, if you want to put your mobile PC, press F8. Then you can see the menu and there advanced boot options, select repair your computer.
  Follow the instructions on the screen and the laptop will also reinstall.
  But don't forget, this (HARD disk recovery) feature is only available with Vista, not XP.

  So if you understand this and burned the Vista recovery disk, you can start to install Windows XP.
  Boot from the XP Recovery disk and follow the instructions on the screen. The installation of Windows XP does not have a lot of time and this procedure is similar to Vista. After installation you also have an installation with all drivers and Toshiba tools but with Windows XP of course.
  This is the content of the Windows XP Recovery disk.

• Satellite Pro P300 has NO stereo Mix in Vista with Realtek sound card

  Hello.

  I have a P300 with Realtek internal sound card and drivers updated.
  I NEED a stereo mixer in the recording devices, but I currently get only a MIC input, even after checking "Show offline and disabled devices."

  Yes, I updated the drivers HD Audio of this site Web and Realtek and still nothing.
  The only other thing that could affect this, but I don't see how I use ASIO4ALL drivers audio in conjunction with the Realtek drivers.

  I'm running Vista 32 bit Edition Home Premium

  your

  Hi mate

  I confused m do you know why?
  Because you talk about audio driver Realtek and sound chip and my knowledge, that the Satellite Pro P300 was equipped with the audio chip Conexant!

  It s NOT the Realtek chip! It s Conexant!

  According my Conexant audio chip experience can't stand stereo mixer in the recording devices!

  Good bye

• Satellite Pro P300 best exit way to get audio for blu - ray player or projector

  Hello

  Would be great if someone has experience on the following points.

  I have a Satellite Pro P300 - PSPCDA 03 P00D: I would like to know the best option for high-quality audio from this unit to a blu - ray player or an optoma projector. (Or a good way to find the answer)

  The blu - ray player has hdmi (the satellite does not work) and the optoma projector has a 3.5 mm mini-plug.

  The satellite has a sound piece dolby - is it possible to get a feed for audio output dolby?

  Any thought / experience welcome.

  Thanks in advance!

  Hello

  Not sure but I think that the headphone socket supports S/PDIF
  I think you should check the user manual for more information on S/PDIF
  If his support, then you can use it to get the best audio quality

  Also found this doc in the knowledge base of Toshiba
  http://APS2.toshiba-tro.de/KB0/TSB5400YZ0005R01.htm

• Satellite Pro P300-19 q - Windows 7 driver for x 86 ACPI system device

  I am trying to upgrade to Windows 7 Vista professional - he told me that to install Toshiba x 86 acpi - compliant value device for general and logical use - help!
  Where can I get it from? I searched for the last 3 hours - my laptop is the satellite Pro P300-19 q - I am a novice to this - thanks a lot in anticipation

  Hello

  You have already installed the drivers? All what you need you can download on the Toshiba site.

  In addition, you must install Toshiba Value added Package. It contains all the necessary tools Toshiba you need.

• Satellite Pro P300-18 - canoe install WIn XP for lack of HARD drive

  I just got a Satellite Pro P300 18 with VISTA pre installed.
  I need to install XP Pro on it, but when I start installing XP Pro from the CD, it says it cannot find any hard drives.

  Is that any body can help me?
  Some of my software works or not or could not, t install under VISTA, so I really need XP on the new laptop computer.

  Kind regards

  Hello Tino

  Yes he'll see.

• Driver for ATI Mobility Radeon X 1600 on VISTA - Satellite Pro A100

  Hello everyone,

  I have a PSAACE - 010010GR Satellite PRO A100 with ATI Mobility Radeon X 1600 graphics card. Now I've updated from Windows XP to Windows VISTA. The problem is that I can't find VISTA drivers for the ATI Mobility Radeion X 1600 graphics card, on the TOSHIBA sites, or sites of ATI - AMD.

  Can someone help me?

  Thank you very much
  Jochen Hamleh

  Have you tried to use the other portable units ATI drivers?
  Satellite A100 or Equium A100.

  Also check the drivers of Toshiba, United States, Canada or Australia Web sites!

• Issue scan fingerprint with Win 7 and Satellite Pro A300

  SORRY, MODEL IS A300.

  Bunk/upgrading Vista to Windows 7 Professional and we found the fingerprint reader does not.
  Unable to remove program and custom accept the new installation of fingerprint reader or even of new fingerprints to be scanned. (Former Vista program works in background somehwere?)

  Is the fingerprint reader, which was installed under Vista now not compatible with WIndows 7.
  It seems to be still no upgrade or downloads for fingerprint drivers for Windows 7.

  Post edited by: lasdec1

  Hi mate

  To be honest, I doubt that Win 7 drivers would be published for this good old classic.
  I mean the Satellite Pro A30 is an older series and even Vista drivers have not been released for this series of models
  I searched on the European driver Toshiba page but I found only the W2k, Win XP drivers for this device

  So if you want to use Win 7 on this laptop, then you need to collect the drivers of your own hands and it would be the same with the fingerprint reader. Maybe the pilot designed and released for other series would work.

  It seems that Toshiba is in the version of the driver for different series you can take a look at the different series and might try the drivers.

• Satellite Pro P300-1ES (PSPCDE) - speed with W - LAN problem

  Hello

  just got my new laptop Toshiba (see subject). Unfortunately, I had a big problem with the W - Lan laptop speed.

  Compared to my old laptop (satellite Pro A120, with a chip of WLAN Intel 3945) the new laptop (with a chip Atheros AR9281) scores only about 10% of the possible Internetspeed (approximately 1.5mbit compared to 0.1mbit!).

  I am running Windows XP Service Pack 3 and tried to install the latest drivers for the card Atheros (7.6.0.200), newest Bios Version (version 2.50) and tried a few things on the forum (like disabling the option 'save energy' in the advanced driver options.) But speed has not improved at all and now I'm all ideas.

  I'd appreciate it if someone could help me with my problem. Many thanks in advance,

  TripleYou

  Hello

  As far as I know the standard WLan card Atheros AR5BXB91 supports the 802.11bgn WLan.

  Check what WLan standard A, B, G or N to have been chosen in the
  * Device Manager-> WLan card properties-> Advanced tab * and set it up again.

• Problem with some keys on Satellite Pro L300

  Hello

  I have a problem with the keyboard on my Toshiba Satellite Pro L300. I can not type 'a', 'q' and 'z '.
  ESC, F1, tab and Caps Look are also don't work.
  I don't spill any liquid on my PC. Need help please, I don't know what to do. Thank you

  You have the latest model of laptop. If there is a problem with the hardware keyboard will be replaced free of charge.
  I recommend you contact the nearest authorized maintainer and ask for help.
  With diagnostic programs, they can check the functionality of the keyboard, and see if the keyboard needs to be replaced.