Restore iTunes after the recovery of the El Capitan of Time Machine OS

Similar Questions

• Compaq Presario SR1760AN AMD3200 + hangs after system restore just after the XP splash screen.

  Epic to date.

  PC not working and suspended on the start Recovery xp splash screen.

  1 wouldn't start or start SafeMode etc.

  2. out of hard drive and plugged on the other pc to save important info because that wouldn't boot. Copied files-WHEW

  3 restarted and tried to recover from D:\ recovery software. -Hangs on reboot after the start screen each time ARGH.

  4 caught Recovery CD that were made when the PC was brand new - failed 5 times! IE system hang after starting xp

  5 Pen Drive has created and initialized Compaq ISO - PC Doctor DOS Version.

  6. inspected PC - found a hard drive to have multiple errors and so dead - replaced by wd 500 GB drive NINE.

  7 PC DOCTOR BACK - pass all other systems, motherboard, RAM, etc.

  8 were again trying to install from the recovery CD "R"is only an option as no recovery partition." 2 unsuccessful attempts so far.

  9 think about jumping from the Westgate bridge.

  Please help if you have any ideas or if I missed something extreemly critical please let me know.

  Signed

  Frustrated, exhausted, SAD ...

  GDay Ruette,

  PROBLEM SOLVED.

  Has decided to remove Kboard and rear USB ports USB mouse and stick 'em in the front.

  HEY PRESTO START!

  Obviously a problem with the rear of the motherboard well that the PC doctor reported no problems.

  OH well Im happy like a cat in #$% T. Update for XP3 reinstalled updates of all HP SP for this system and we are offshore and running. TIP for any related problem: always google and read similar messages: you can often find the answer that I did.

  

• Restore the iPad App via Time Machine?

  Let's see if I can explain it clearly without writing a novel...

  We used iBank on a series of iPads in Quicken replacement.  iBank was wonderful.

  A few days ago, we decided to accept the upgrade to the new version of the App.  The upgrade has changed the name of the application of Banktivity 5.0.3.

  After the update the app is more responsible, is back with ' an error occurred during the migration of permanent storage' and when we hit OK you get the spinning wheel of death, eternally.  Fearing yet another Apple HW question I made the mistake to immediately an iPad manual backup because I did not know when the last of them automatic was and I didn't lose anything else on the iPad.

  The iPad is running 9.3.1 model number MD516LL/a H/W.

  We have iTunes to save 'automatically' iPad 'to this computer.  We do not use the cloud.

  I had an exchange of mail with the support of the IGG, but when we walked in the restoration of a previous automatic backup on the iPad, they were out of their depth.  I have no complaint with their support, they do not know where are stored the backups or how to proceed.

  So, that's where it gets interesting/frustrating.

  I try to use Time Machine to restore the App from a previous version in iTunes and then sync to iPad.

  I do not see the backup files to iPad specific laptop I use for backup "automatic" iTunes "to this computer.  I see the list of applications on the iPad iTunes in the ' users > Shared > iTunes > directory of Mobile Applications.  I'm going back in time in Time Machine to find the last backup the previous version of iBank has or Banktivity iTunes before 5.0.3... in the hopes of restoring just that specific app and data...

  ... Previous Time Machine backups have iBank or Banktivity listed in the applications!  I have looked far and sought to my heart's content, but none are here.  All other applications will appear in the list, but not iBank or Banktivity.  Now, I'm stumped... Why would not appear anywhere in the last backups?

  Having lost all historical and current in the iBank data are a pretty big disaster if I don't want to take the risk of ruining more by doing a partial or full restore iPad without understanding why the previous of iBank versions and/or Banktivity do not appear in the lists before the last manual of Time Machine backup?

  The iPad is an ideas, thoughts or suggestions would be most appreciated.

  Real applications are not stored in the backup (which contains the content of applications, your settings, documents, photos etc), restoration (backups are stored in ~/Library/Application Support/MobileSync/Backup/on a Mac, a backup is not designed to be readable by the user) would look to pick up the application of the section My Apps from your iTunes library - so looking for a old backup iPad in Time Machine won't help your find the app.

  As to why the app does not appear in your Time Machine backup of your folder "Mobile Applications", looking for the correct name of the application (the name that shows in your iTunes Apps my chapter cannot be the same as the file real .ipa computer/time Machine; some of my friends have very different names)?

• After the purchase, how much time have we download the application?

  After the purchase, how much time have we download the application?

  Hi Peggy,

  Download the product can be done immediately, however if you bought the subscription, you must wait to activate the product until the payment goes through, and the same goes for a perpetual license product once the payment goes through you will receive your serial number to activate the product.

  Kind regards

  Bani

• How Downgrade of El Capitan in Yosemite without data loss and without the help of a Time Machine?

  I, are looking for an answer to this question, but couldn't find one.  If there is an and missed it, please tell me and I will look happily on it.  I want to do it without the help of a Time Machine, because I used it at the time of Yosemite.  And I discovered that you can use a cable USB or SD to come down, but how do you do this without losing all my data?

  You must save, erase the drive, install Yosemite, restore your backup of the data

• Restore backup after the reset Time Capsule (1st generation) using Windows PC

  I apologize if this question is somewhere already. I tried to find an answer and I've seen similar discussions but not exactly what I need.

  A bit of history... The location is a small school with about 10 cameras, its network systems, point of sale, cloud networked storage, etc. Was asked by the owner to create or activate a Guest WiFi SSID. They said he worked at the same time, but some work was done by a previous technician and they lost the WiFi of comments.

  So I used the Airport utility to access the time Capsule. However, after the change to the next level (enable the public IP sharing? maybe?), he ended up destroying the entire network, as in nothing was back upward when the utility scanned for devices. Even the Time Capsule was not recognized by the utility. I ended up doing a hard reset on the Time Capsule and do my best to manually configure the device again, even though I was not initially designed the network. I have also discovered that 1st generation Time Capsules have no comments WiFi capabilities.

  To make a long story short (too late... "I know sorry..) .. I got most of the features, functions, etc. on the network back where they were before, with the exception of camera systems and a network storage device active cloud to the owner's House.  What I would like to know is... Since then, I understand that a hard reset does NOT erase the backup or other data on the shared disk in the time Capsule... is there an easy way to restore the settings of all of the time Capsule before the problem occurred?  I would need to do this using a Windows computer.

  Any help will be greatly appreciated. What I'm trying to avoid the most is having to reset all the cameras, which are upstairs, hard to reach areas. I guess that people who were previously assigned on the cameras must still be there. If only I could get the Capsule of time exactly where it was before he went down, which would allow me to save a lot of time and frustration.

  You can also (2nd choice)... If there is a simple way to detect the active network cameras and other devices on the Time Capsule and pull the IP out of them, that would be helpful as well.

  Thanks in advance for answers!

  What I would like to know is... Since then, I understand that a hard reset does NOT erase the backup or other data on the shared disk in the time Capsule... is there an easy way to restore the settings of all of the time Capsule before the problem occurred?

  You have my sympathy all...

  Been to this place before today... and I always get myself into it by pure stubbornness... I should just walk on some of these jobs and tell them too hard...!

  What you had to do was to export the configuration before you start playing. Without export of the configuration there is not much hope of healing to less than the previous tech saved a configuration to the unit... This example gets much delicate.

  The TC is actually able to contain several configurations... There is a good chance, however, that wipe you the.

  Anyway... coming to the serious Tin. (same version on Mac and PC utility should work the same).

  Here's my TC who foolishly a reset.

  

  When I do something... first manual configuration, I wonder is to revert to the previous version.

  

  You have done or could you saved the previous settings as a profile... I hope that you did... in the hope...!

  IF so, you have a saved profile.

  In the area of the top menu go in manage profiles.

  

  

  Now, if you are lucky or did the job just last time... by accident... you'll have a saved profile... Just click back.

  

  If nothing is there, or it's current settings... Sorry, but you didn't know something was there... and you cannot was expected to know the trouble you would get yourself in.

  If you have changed a setting in the TC of the bridge in router mode...

  

  (enable the public IP sharing? maybe?)

  Getting back to what it was... mode bridge being the most common.

  At the bridge of the TC does control most things... and you need to return to the main router.

  If the TC kicking upward a stench to return to the bridge, reset it simply still once and then bridge will work... It would be useful to loads to remember what was the setting... just to see the bridge takes the TC of the equation to know where the cameras are.

  If the cameras are on static IP, they will respond to a ping scanner... If the primary router is configured for a standard range of IP addresses... 192.168.1.xxx some.

  Then the TC in bridge must have also taken an ip address in this range and the cameras (Ethernet or wireless)?

  I hope that ethernet, but if they were using the TC as a wireless access point, unless you know exactly the SSID wireless as it was in the past then you do not have this info...

  Look at any computer, they have in the building that was running wireless and watch all the SSID that they use... one of these is likely the TC and you can restore this name.

  Or drop a camera... and ethernet allows to connect to him... and find the ssid, that it's been fixed... redefine the TC on this name (SSID) wireless security... all cameras must be able to connect to it... and you can then restore the entire system by connecting to the IP address that will be displayed in the list on the main router.

  Good luck.. as says Han Solo... you'll need!

• System restored automatically after the installation of updates & a few missing desktop icons.

  Original title: same set of updates on both computers due to different problems, one problem being a system restore.

  I have two Windows 7 computers in my house.  They all have two problems after installing updates a month ago.  The problem for 'Computer 1' is a bigger problem than the problem of the "Computer 2".  2 computer problem not really seems to be a problem now, but I'll give you the information for comparison purposes. Sorry for the length of this post - I am trying to be thorough.

  1 COMPUTER DETAILS:

  News of the computer: Dell Studio 1745 laptop computer running Windows 7 Home Premium 64 bit, six months at the time of the problem, now age of seven months. It came with Norton pre-installed, never used and uninstalled.  Trend Micro Internet Security installed at the beginning of the use of the computer.  Analyses Micro trend came clean.

  Background: set up with a single account (Administrator, of course) and after a few days of putting in place computer, said ale user account for everyday use.  Computer is configured to warn me before downloading/installation of updates of Windows, with permission for each type of account to install Windows updates.

  While in the standard account, I welcomed these download/install updates and was prompted to restart the computer.  I was done with the computer, so I just closed instead of restart.  According to "Your update history Review", it's updates and they were all successful:

  Update for Windows 7 for x 64-based systems (KB980846)
  Microsoft .NET Framework 4 Client Profile for Windows 7 x 64-based Systems (KB982670)
  Update for Windows 7 for x 64-based systems (KB982519)
  Update Microsoft .NET Framework 3.5 SP1 for Windows 7 and Windows Server 2008 R2 for x 64 systems (KB982526)
  Cumulative update for Media Center for Windows 7 x 64-based Systems (KB981078)

  After you turn on computer back, everything seemed normal.  I opened Firefox and I got a notice that Firefox has an update is available, a standard user cannot.  Unlike some programs, there is no popup to sign as an administrator, so I went to start > switch user and signed as an administrator.  (There was no update of Firefox at this point - just a switch single user.) That's where the problem appeared: instead of normally load the admin Office, I had to wait while Windows configured my desk (it's new)... wait... wait... wait... wait... BAM!  Your computer has been successfully restored * insert date here * (I don't remember what it was - January of this year, perhaps - because I was so incredulous that it happened and I continued to watch the game "successfully restored").  I do not have the computer to eat, and it don't has not asked me if I wanted to restore it.  He just did, just on its own initiative, when I went on the admin account.  A bunch of shortcut icons are missing from the Office of the admin acct and the ACCT. standard, and wallpaper to the admin account has been changed.  I am not absolutely sure if nothing else was touched.

  I have searched online to try to understand why it happened, and I remember well from my only find, is that if I went to the restoration of the system, there will be an option to cancel it, but I don't see such an option. So I told the computer to eat on a few days to a week before that updates.  It doesn't seem to help.  Shortcut icons are still missing.  Looked at the update history and it shows the five latest updates as being installed successfully, but Windows Update tells me that I need to these five updates AND this time, the little check marks are only already there on four of the five updates listed.  (The first time, the little checkmarks were already there for all five.)  This is the update that is NOT now pre-checked:

  Microsoft .NET Framework 4 Client Profile for Windows 7 x 64-based Systems (KB982670)

  Do not reinstall the five updates.  I don't know if I should jump install them again, or if I should install only the
  now, four are already "pre-checked."  I'm very hesitant to install KB982670, because this update seems to be the likely cause of the problem given the fact that it is already pré-coché in the Windows and the following information updates for computer 2.

  Since I installed the latest updates for 1 computer with no apparent problems:

  X 64-July Windows malicious software removal tool (KB890830) 2010
  Update security for Windows 7 for x 64-based systems (KB2032276)

  NEWS ON COMPUTER 2:

  The computer news: Systemax desktop running Windows 7 Professional 64-bit, a month at the time of the problem, now age of two months.  It has not come with any pre-installed antivirus.  Trend Micro Internet Security installed at the beginning of the use of the computer.  Analyses Micro trend came clean.

  Reminder: Set up immediately with an admin account and a standard account for everyday use.  Computer has been set to automatically download and install updates for Windows, but is about to inform me first.

  At the time of the problem above with the laptop, desktop computer has been enabled.  As all loading,.
  an error message came that there was some kind of issue with the .NET framework.  At another person asked if he knew what was up with that, and it didn't.  Did not note the specific message, thinking he would tell me again if there was a real problem.  I thought it could have been some kind of Windows hiccups when starting the computer, not even knowing about update problems.  I have yet to see this message.  After the number of laptop (computer 1), I took a peek at the desktop computer (computer 2) to check that Windows Update and I saw that an update is available, which is the referenced above same update that the notebook had already the check mark in its box (KB982670), which gives me the choice to check the little to install it.  Very curious, since, as already mentioned, the computer has been configured to automatically download and install Windows updates.  Looked at the update history, and it has already downloaded and installed the other four updates that the laptop has been.  Changed the automatic Windows Update setting to warn me before you download and install updates.  I have not installed the missing update.  Said the only other person in the House who would probably bother install updates to not install it.

  A month later, 2 computer has a notification from Windows update that 21 or 22 updates are available (as a result, by clicking on the icon of the trial of Microsoft Office).  The update not installed a month ago is no longer on the list, and update history shows as having been installed a few days before, apparently because someone else in the House must have thought it looked like a good idea.  I installed all the 'important' updates and have not seen any more problems with computer 2.

  BACK TO THE COMPUTER 1:

  Yes, is there anyone with ideas on how to get 1 computer back to its state before the 5 updates listed above, and what to do about to reinstall some or all of them, I hope, without more problems, for example a random food system does not happen?  I have a feeling I will say that the random system restoration do not occur, but he did.

  Thanks for any help.

  No, I don't use the Norton removal tool.

  IN RE COMPUTER 1 ONLY:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 for good measure, reset Windows Update by...

  How to reset the Windows Update components?
  -Online skip the section to APPLY to; KB971058 access via I8 32-bit only; Run the difficulty in DEFAULT and modes, then AGGRESSIVE [1]
  http://support.Microsoft.com/kb/971058

  5. restart & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will delete your update history (but not list updates in the updates installed)

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• lost all the restore points after the reinstatement of windows

  Original title: have just re-recorded windows software, now Ifind I lost all the restore points. How can I get the old one back?

  Windows has been registered online. Checked restore points after recording and found that the only listed restore point was created when the software has been registered. How can I find the previous restore points?

  If you reformatted and reinstalled windows, you will lose any restore points. Theyre gone

• Cannot install Itunes after the update to windows 8

  Ive had my phone for about 3 years and bought with windows 7 on it and installed iTunes and it worked perfectly fine, even after I did the free update to windows 8. However, I've recently had to factory reset my laptop and now when I try to download iTunes on it keeps saying that it is not compatiple with this softwear... Help, please

  Hello

  See if this helps you:

  "Remove and reinstall iTunes and the components of the software for Windows 7 and later versions.

  https://support.Apple.com/en-us/HT204275

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  ______________________________

  After you download and save iTunes > right-click on its setup.exe/install.exe > select run as administrator to install it.

  _____________________________

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• THUMBNAILS VIDEO DISAPPEARED AFTER THE INSTALLATION OF REAL TIME

  After you have installed the latest version of "Real Time Player" which is an upgrade to 'Real Player of cloud', all the video thumbnails are not visible on a single computer. 'Real time' has been installed on two computers with almost identical Windows 7 Home Premium and processors within minutes of each other.  A computer kept all video thumbnails while the other did not. So far I have uninstalled and reinstalled in real time, uninstalled and reinstalled Real Cloud, but still no thumbnail previews. I also tried the verification of the method 'display only the photos '.  I'm looking for someone who's hands are successful on empirical knowledge for this question. Thank you.

  Stanley,

  Here's a recent update on my original investigation.

  After an upgrade of RealTimes Player RealPlayer Cloud download failed to produce thousands of miniature video generated by RealPlayer cloud, I immediately started looking for answers in this forum of Microsoft.

  I have two new computers HP here on my desk. A computer has received the RealTimes Player download and continued to display thumbnails. This is the second HP computer that the thumbnails are not visible.

  Several answers to this problem repeated the same methods. I tried these methods more than once and still no pictures. Then I took action on your message and another someone from Real.com contact Real.com. The only way to contact Real.com was by email on their website. I sent them an email describing the problem. Now, it's my experience that Real.com has even good tech support for free download of RealPlayer. Their first suggestions were identical to the information I received Microsoft community. Following is a concise list of end to end on how I solved the problem before Real.com phoned for help, which may have included access remotely:

  (1) download the RealTimes Player "new" (that's their latest version of RealPlayer cloud;) I know now I should have stayed with cloud of RealPlayer).

  (2) a computer downloaded without any problems, while the second computer lost all thumbnails.

  (3) I contact Microsoft Community to get answers.

  (4) community Microsoft sends answers, including and meet someone from Real.com.

  (5) none of the above gives a solution.

  (6) I am Real.com e-mail for a few days through their website with no solutions.

  (7) I have uninstall RealTimes Player on both computers.

  (7) I call the HP Technical Support to make a 'system restore' on computers.

  (8) after the "System Restore", I reinstall MSE, and all thumbnails are restored on the computer and three external hard drives. All thumbnails are Windows Media files. None of the hundreds of RealPlayer Cloud files can be opened.

  (9) Real.com offers to call me at one time that I choose, which may include remote access to my computer.

  (10) I answer Real.com Friday that a time to call will be the following Monday.

  (11) the following Monday at the appointed hour, Real.com has not called. I waited 30-40 minutes. While I was waiting, I've been on the Real.com site read comments in the section "RealPlayer/RealPlayerCloud. In a response from Real.com Tech to one of the speakers, they gave to this speaker a link to download RealPlayer Cloud. I took a chance with this link and downloaded RealPlayer Cloud in my computer, not only did the Windows Media thumbnails remain, but I was able to play all audio Real Player and video files, and the "Download this video" button a drop down of RealPlayer has been restored. I turned so my attention on the other computer, clicked on a download link that says Cloud RealPlayer on Real.com Web site, and when the download is complete, it was the new RealTimes Player again, not RealPlayer Cloud. But, all right. All thumbnails are back in this computer while being able to play all Real Player files. Now, a computer has the 'new' RealTimes Player and the other has the original cloud of RealPlayer.

  (12) after all this was over, and two computers were back to normal, the representative of Real.com called (almost two hours late; he was on another call that lasted longer than normal). I explained that while you wait for him to call, I reinstalled Real Player on both computers and everything was back to normal. I mentioned reinstalling RealPlayer cloud on the other computer and it recommended that all was well under way, for whatever. I agree with you.

  (13) since the call of the representative, Real.com has sent me a couple of times and told me they were happy that the problem has been resolved and do not hesitate to contact them for any future problems. I asked for a download link for RealPlayer cloud which they sent a warning that they were not certain if the link has an expiration date, but to contact them for any problems or questions.

  (14) although I have Google Chrome on a single computer, all my audio/video download through RealPlayer Cloud/RealTimes drive is via Internet Explorer, not Google Chrome. I prefer the drop-down menu "Download this video" button at the edge of the screen in Internet Archive rather than the barely visible button at the top to the center of the page in Google Chrome.

  Microsoft 15 community) thanks and Real.com.

  (16) a lesson learned. When everything works fine, why switch?

      

   

• Logic ruined after you have configured the controller Akai. Time Machine will fix it?

  So I am using Komplete Kontrol for over a year. Problems of cero. I have a new MPK261 AKAI and proceeded to set up in the logic, following the instructions on the AKAI website for this (http://www.akaipro.com/kb/article/1600).

  I don't know what the * happened but the logic went crazy after that... the buttons on the controller to make each window I opened just flash and pop up intermittently.

  I'm not really try know what happened (doubt I'll ever find and the AKAI people do not react), my guess is these AKAI placed somehow in conflict with the settings of Komplete Kontrol, and I have replace the file com.apple.logic.pro.cs from the library > Preferences, which also could have been she.

  So, I just want to ask if using Time Machine to settle things a few days back will correct this? I've never used a time Machine (I have defined daily backups, but never had to use before), so I don't know if it will work.

  Thank you!

  Before going to the road Time Machine... (which I do not know the answer anyway)

  Try this:

  With the logic does not--

  Remove the 10 logic preferences file AND the areas of shared control file.

  (In your case, simply remove the control surfaces pref)

  In the Finder, choose go > go to folder from the menu.

  Type ~/Library/Preferences in the field 'go to folder '. (Note :) Type exactly-> ~/Library/Preferences)

  Press the Go button.

  Delete the file com.apple.logic10.plist from the Preferences folder. Note that if you set custom shortcuts, it will reset to the default values. You can export your custom key as a preset before performing this step. See the user manual Pro Logic for more details on how to do it. If you are having problems with a with Logic Pro control surface.

  then delete the file com.apple.logic.pro.cs from the Preferences folder.

  Next time you start logic will be rebuilt the default surface control file.

• Can I optimized the HD with the help of a time machine restore?

  ??

  I recently deleted all my data from my Time Machine and then started fresh with a new full backup.

  QUESTION: This new backup Time total Machine in any way "optimized" - perhaps the data is better organized on the disc?

  If so, then if I now erase my HD and restore from this new fresh backup from Time Machine, that would be good?

  I started to believe some computer unfounded myths and urban legends?

  Thanks for any insight of this.

  No and no. and do not really.

  You will get no improvement whatsoever.

  The old disk optimization tricks are over... If the disk is slow in your Mac replaced with SSD.

• Restore the data in the external drive using Time Machine

  Hi y ' All!

  I store my photos in my external hard drive because there is not enough space in memory is internal. This is actually my second drive external hard than my first (Adata HE720) is not the beginning of last year. Unfortunately, my WD Elements has stopped working and I can't restore data using Time Machine, as the drive is not found in Time Machine under devices, and I'm sure that I restored my photo library and many other files from my old external drive using Time Machine.

  Can someone tell me how to recover my old files? I have many other important data here including my photos and I don't want to lose them. I'm fairly positive that Time Machine allows me to get the data as is the point of it.

  Thank you in advance!

  P.S. If you guys have any recommendation on a reliable external drive, please do tell me!

  Hey guys, I found the problem.

  It turns out that I'm never giving time Machine to deselect my external drive to backup; Therefore, there is absolutely no copy done during execution Time machine. I really don't understand why Apple made this the default behavior, but it is what it is.

  So, people, don't forget to go to Time Machine preferences and make sure that you remove the external hard drive that you want to backup under options. Once you do, you can enter the time Machine and your drive will appear under devices.

  See you soon.

• How to speed up my MacPro 2009 after the El Capitan updated?

  I have just the El Capitan OS installed on my MacPro machine (2009), and since I did, he managed seriously slow down. Everyone there knows a way to accelerate this return, in addition to becoming a new mac? Any help would be greatly appreciated. I already ran disk utility, cleared out the file cache, done basic diagnostic stuff. Made some power re-creation, Landau, etc. nothing helped.

  Yo mean by slow? Spinning beach ball?

  Run and view the results here so that we know more about your configuration.

  http://etrecheck.com/

  EtreCheck

  https://discussions.Apple.com/docs/doc-6172

• where is the bookmark using apple time machine back-up?

  I had upgraded my macbook pro to maverick. I've been very buggy & help w/apple, I restored to mountain lion via the time machine. However, I need to get my week bookmarks toolbar last (I have a few new bookmarks that have not been added until after I installed maverick). I need to know how I can access them and where they are located, & restore my bookmarks bar.

  You can try to restore a backup if restored then JSON the places.sqlite file did not help.

  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox