Restore data after the update to 2.3

Similar Questions

• recover data after the update results in recovery mode

  Hello! I feel absolutely terrible and any help would be greatly appreciated. I have an old IPhone 4S that has been put into market and on himself. One of my friends told me to go to IoS9. Terrible mistake because it made my phone goes into recovery mode.

  I never did all backups on Icloud and on ITunes. Worse still, I never had ITunes in my life. (I am kind new to smartphones, this IPhone was given just for me)

  A friend of a friend has offered to help and I gave her my IPhone for a little more than 10 minutes. He has a Mac and said he could do something (legal or not, I have no idea). But then I realized that there are things really private in my IPhone that I would not want anyone other than me to see. So I asked him to stop whatever he was doing. The phone is still on the recovery mode when I got back, he had the phone for about 10-15 minutes, and I never gave him the passwords. My question is simple: would he able to access my data in any ways if he wanted to?

  I went to an Apple store and a saleswoman told me that there was no way he could have access to what in my phone as the phone was completely blocked / blocking. And then I'm going home and read things like Wondershare, on ways to get data without passwords and I completely panick on everything.  You have to be a complete genius this information?

  I guess I just need to be reassured. Thanks to you all.

  PS: I'm not English, I hope I have made myself understandable!

  If the phone goes into recovery mode, restore only on a new version of the iOS will be bring back to life.

  The password for the lock screen can't be changed if restore you to a computer that was used to put in place or to sync the phone in the past. Other computers cannot access the data on the phone, he's going to be wiped out during the installation procedure. If you never connected to a computer, the first time that you try to synchronize, the phone will be erased, over, synchronization, it will take the password of the lock screen to display on the phone.

• Don't see the screen applications & data after the update means that your data has been erased?

  I've just updated to iOS 10 and there is installed, but it shows a screen called Apps & data and gives options to restore the data, set it up as a new iPad or move data from Android. I was wondering if it meant that my data has been deleted completely?

  It's an iPad running iOS 10 4.

  Yes. This screen is available only after a deletion.

• Restore data after the request as an Oracle

  Hi all
  
  My requirement is to check some check boxes-> SAVE-> F11-> control F11. The user want to see the check. Average thec checkbox must be checked until the form is open.
  
  Please answer thank you.
  
  Thank you.
  
  Published by: Amit1cs on April 15, 2013 13:11

  Hi, you can save your checkbox value in your database table. And if your block is table-based, so you need no yo effort - show that the form will do.

• Is it possible to recover data after the factory restore?

  Hi, I have laptop G62-340US and I use windows 7 64-bit. I am having trouble with streaming online videos, and whenever I start my computer, it shows a kind of errors, so I thought to restore my computer to factory setting. But I have some data inportant on my computer. I've been me request so if it is possible to recover data after the factory restore or I do something that restor factory will not delete my data?

  Hello

  You will need to back up all your personal files, etc. before executing a factory reset - an option to do this is to use the facilities available in Windows 7, as described in the guide on the link below.

  http://www.howtogeek.com/HOWTO/1838/using-backup-and-restore-in-Windows-7/

  Kind regards

  DP - K

• Delete buttons do not work after the update of 10.11.16.

  Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

  Any suggestion would be appreciated.

  Greetings, r.fromstouffville!

  It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

  Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

  Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

  How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

  Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

  On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

  Thank you for the communities of Apple Support!

• After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue?

  After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue? Thank you

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Service SQL Server 2014 will not start start after the update sp1 (KB3058865, KB3075950, KB3094221)

  Hi, my SQL Server 2014 works very well in my server with WIndows 2012 until I installed the new day & service pack that was required for server hardening.

  I successfully installed SP1 KB 3058865 first, then discovered that the services do not start. After so much research to fix, I came with the 2 cu updates KB3075950, KB3094221 in knowing that it could solve my problem but unfortunately is not.

  I also tried to change the service account that many suggest, but his does not work.

  I tried to replace the master file & maslog but also failed.

  I tried to run etc and unique usermode and restore master db... also failed.

  Here is the log file:

  16/02/01 15:21:21.83 Server Microsoft SQL Server 2014 (SP1 - CU3) (KB3094221) - 12.0.4427.24 (X 64)
  October 10, 2015 17:18:26
  Copyright (c) Microsoft Corporation
  Standard Edition (64-bit) on Windows NT 6.2 (build 9200 :) (hypervisor)

  2016-02-01 15:21:21.84 setting the server UTC: 08:00
  2016-02-01 15:21:21.84 Server (c) Microsoft Corporation.
  2016-02-01 15:21:21.84 server all rights reserved.
  2016-02-01 15:21:21.84 server process ID is 5128.
  2016-02-01 15:21:21.86 Server system manufacturer: "Microsoft Corporation", model of system: 'Virtual Machine '.
  2016-02-01 15:21:21.86 the server's authentication mode is MIXED.
  2016-02-01 15:21:21.86 Server record SQL Server messages in file ' C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\Log\ERRORLOG'.
  2016-02-01 15:21:21.86 Server service account is "NT Service\MSSQLSERVER". This is an informational message; no user action is required.
  2016-02-01 15:21:21.86 registry server startup parameters:
  -d C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\DATA\master.mdf
  e C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\Log\ERRORLOG
  l C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\DATA\mastlog.ldf
  2016-02-01 15:21:21.86 Server startup command line parameters:
  s 'MSSQLSERVER '.
  2016-02-01 15:21:22.27 Server SQL Server has detected 1 struggling with 1 cores per socket and 1 logical processors per socket, 1 total logical processors; using 1 logical processors based on SQL Server licenses. This is an informational message; no user action is required.
  2016-02-01 15:21:22.27 Server SQL Server starts at the normal base priority (= 7). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.28 Server has detected 7999 MB of RAM. This is an informational message; no user action is required.
  2016-02-01 15:21:22.28 Server using conventional memory in the memory manager.
  2016-02-01 15:21:22.33 default server collation: SQL_Latin1_General_CP1_CI_AS (us_english 1033)
  2016-02-01 15:21:22.37 Server this instance of SQL Server is a latest report by using a process ID of 1600 at 01/02/2016 15:13:12 (local) 01/02/2016 07:13:12 (UTC). This is an informational message only; no user action is required.
  2016-02-01 15:21:22.38 the maximum number of connections administrator dedicated to this server instance is '1 '.
  2016-02-01 15:21:22.38 configuration of server node: node 0: CPU mask: 0 x 0000000000000001:0 Active CPU mask: 0 x 0000000000000001:0. This message provides a description of the NUMA configuration for this computer. It is an informational message only. No user action is required.
  2016-02-01 15:21:22.40 allocation of dynamic locking using the server.  Initial allocation of blocks of lock of 2500 and 5000 per node lock owner.  It is an informational message only.  No user action is required.
  2016-02-01 15:21:22.43 spid8s start database 'master '.
  2016-02-01 15:21:22.49 Server CLR version loaded v4.0.30319.
  2016-02-01 15:21:22.51 spid8s d - 8 operations in the database 'master' (1:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.61 Server common language features (CLR) runtime initialized using CLR version C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ v4.0.30319.
  2016-02-01 15:21:22.62 spid8s 0 operations cancelled in database 'master' (1:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.62 spid8s Recovery is writing a checkpoint in database 'master ' (1). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.79 spid8s SQL Server Audit begins audits. This is an informational message. No user action is required.
  2016-02-01 15:21:22.80 spid8s SQL Server Audit has begun audits. This is an informational message. No user action is required.
  2016-02-01 15:21:22.88 spid8s Trace SQL ID 1 was launched by the "sa" login
  2016-02-01 15:21:23.28 spid8s server name is "UATCASADB". It is an informational message only. No user action is required.
  2016-02-01 15:21:23.28 spid13s A self-generated certificate was loaded successfully for encryption.
  2016-02-01 15:21:23.33 spid13s Server listens on ['none' 1433].
  2016-02-01 15:21:23.40 spid13s Server listens on ['none' 1433].
  local connections provider 2016-02-01 15:21:23.44 spid13s server is ready to accept connection on [\\.\pipe\SQLLocal\MSSQLSERVER].
  local connections provider 2016-02-01 15:21:23.44 spid13s server is ready to accept connection on [\\.\pipe\sql\query].
  2016-02-01 15:21:23.48 Server Server listens on [: 1 1434].
  2016-02-01 15:21:23.49 Server Server listening on [127.0.0.1 1434 ].
  2016-02-01 15:21:23.49 connection admin support dedicated server was created for locally listening on port 1434.
  2016-02-01 15:21:23.49 Server SQL Server attempts to save an of Service Principal name (SPN, service principal name) for the SQL Server service. Kerberos authentication is not possible, until a name for the SQL Server service is SPN. This is an informational message. No user action is required.
  2016-02-01 15:21:23.60 spid14s A new instance of the full-text filter daemon host process has been started successfully.
  2016-02-01 15:21:23.71 Server SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [MSSQLSvc/UATCASADB.onenetworkbank.com.ph] for the SQL Server service.
  2016-02-01 15:21:23.72 Server SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [MSSQLSvc/UATCASADB.onenetworkbank.com.ph:1433] for the SQL Server service.
  2016-02-01 15:21:23.97 spid17s start database 'msdb '.
  2016-02-01 15:21:23.98 spid18s database startup "ReportServer".
  2016-02-01 15:21:23.98 spid19s database startup 'ReportServerTempDB '.
  2016-02-01 15:21:24.03 spid9s start database 'mssqlsystemresource '.
  2016-02-01 15:21:24.08 spid9s the base resource database build version is 12.00.4427. It is an informational message only. No user action is required.
  Error logon 2016-02-01 15:21:24.11: 18401, severity: 14, State: 1.
  2016-02-01 15:21:24.11 of logon login failed for user "NT SERVICE\ReportServer". Reason: The server is in script upgrade mode. Only one administrator can connect at this time. [CLIENT: ]
  2016-02-01 15:21:24.18 spid19s 1 transactions rolled forward in the 'ReportServerTempDB' (6:0) database. It is an informational message only. No user action is required.
  2016-02-01 15:21:24.28 spid19s 0 transactions cancelled in the database 'ReportServerTempDB' (6:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.44 spid17s 133 transactions rolled forward in the database 'msdb' (4:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.73 spid17s 0 transactions cancelled in the database 'msdb' (4:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.74 spid17s Recovery is writing a checkpoint in database 'msdb' (4). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.79 spid9s start database 'model '.
  2016-02-01 15:21:25.01 spid9s clearing tempdb database.
  2016-02-01 15:21:25.94 spid9s start database 'tempdb '.
  2016-02-01 15:21:26.12 spid20s The Service Broker endpoint is in a disabled or stopped state.
  2016-02-01 15:21:26.12 spid20s The Database Mirroring endpoint is disabled or stopped state.
  Manager of Service Broker 2016-02-01 15:21:26.15 spid20s began.
  2016-02-01 15:21:27.32 spid8s database 'master' is upgrading script 'msdb110_upgrade.sql' of level 201328592 level 201331019.
  2016-02-01 15:21:27.32 spid8s-
  2016-02-01 15:21:27.32 spid8s start PRE_MSDB execution. SQL
  2016-02-01 15:21:27.32 spid8s-
  2016-02-01 15:21:28.36 spid8s configuration database COMPATIBILITY_LEVEL option for 100 for database 'msdb '.
  2016-02-01 15:21:28.56 spid8s-
  2016-02-01 15:21:28.56 spid8s start PRE_SQLAGENT100 execution. SQL
  2016-02-01 15:21:28.56 spid8s-
  2016-02-01 15:21:28.60 spid8s configuration database option COMPATIBILITY_LEVEL of 120 for the database 'msdb '.
  2016-02-01 15:21:28.77 spid8s Configuration option 'allow updates' goes from 1 to 1. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:28.77 spid8s Configuration option 'allow updates' goes from 1 to 1. Run the RECONFIGURE statement to install.
  Error logon 2016-02-01 15:21:29.18: 18401, severity: 14, State: 1.
  2016-02-01 15:21:29.18 of logon login failed for user "NT SERVICE\ReportServer". Reason: The server is in script upgrade mode. Only one administrator can connect at this time. [CLIENT: ]
  2016-02-01 15:21:31.84 spid8s attempting to load library 'xpstar.dll' in memory. It is an informational message only. No user action is required.
  "2016-02-01 by using spid8s 15:21:31.86"xpstar.dll' version ' 2014.120.4100 ' to run the extended stored procedure 'xp_instance_regread '. This is an informational message only; no user action is required.
  2016-02-01 15:21:31.89 spid8s DBCC TRACEOFF 1717, process server ID (SPID) 8. This is an informational message only; no user action is required.
  2016-02-01 15:21:31.89 spid8s DBCC execution completed. If DBCC printed in error messages, contact your system administrator.
  2016-02-01 15:21:31.90 spid8s
  2016-02-01 15:21:31.90 spid8s create table temp_sysjobschedules
  2016-02-01 15:21:32.20 spid8s
  2016-02-01 15:21:32.20 spid8s Alter table sysdownloadlist...
  2016-02-01 15:21:32.22 spid8s
  2016-02-01 15:21:32.22 spid8s Alter table sysjobhistory...
  2016-02-01 15:21:32.24 spid8s
  2016-02-01 15:21:32.24 spid8s Alter table systargetservers...
  2016-02-01 15:21:32.25 spid8s
  2016-02-01 15:21:32.25 spid8s Alter table sysjobsteps...
  2016-02-01 15:21:32.40 spid8s Configuration option 'allow updates' goes from 1 to 0. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:32.40 spid8s Configuration option 'allow updates' goes from 1 to 0. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:32.42 spid8s
  2016-02-01 15:21:32.42 spid8s-
  2016-02-01 15:21:32.42 spid8s PRE_SQLAGENT100 execution. Full SQL
  2016-02-01 15:21:32.42 spid8s-
  2016-02-01 15:21:32.46 spid8s DMF pre-shaping within walking distance...
  2016-02-01 15:21:32.83 spid8s DC pre-shaping within walking distance...
  2016-02-01 15:21:32.83 spid8s check if Data collector config table exists...
  2016-02-01 15:21:32.84 spid8s State of collector of data before the update: 0
  2016-02-01 15:21:32.84 spid8s pre_dc100::Check if syscollector_collection_sets_internal table exists...
  2016-02-01 15:21:32.84 spid8s pre_dc100::Capturing Collection to define the status of temporary table...
  2016-02-01 15:21:33.05 spid8s Deleting cached generated automatically collect T - SQL packages to msdb data...
  2016-02-01 15:21:33.05 spid8s end of the DC pre-staged to level as follows.
  2016-02-01 15:21:33.05 spid8s DAC pre-shaping within walking distance...
  2016-02-01 15:21:33.06 spid8s from CAD pre-shaping within walking distance...
  2016-02-01 15:21:33.06 spid8s end of the CAD pre-staged to level as follows.
  2016-02-01 15:21:33.06 spid8s-
  2016-02-01 15:21:33.06 spid8s start execution of MSDB. SQL
  2016-02-01 15:21:33.06 spid8s-
  2016-02-01 15:21:33.19 spid8s Configuration option 'allow updates' from 0 to 1. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:33.19 spid8s Configuration option 'allow updates' from 0 to 1. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:33.37 spid8s check the size of the MSDB.
  2016-02-01 15:21:33.63 spid8s error: 8966, severity: 16, State: 2.
  2016-02-01 15:21:33.63 spid8s can not read and lock the page (1:56616) with lock type SH. page no ID invalid. has failed.
  2016-02-01 15:21:33.63 spid8s error: 8946, severity: 16, State: 12.
  2016-02-01 15:21:33.63 spid8s Table error: Allocation page (1:56616) has invalid header values to the PFS_PAGE page. The type is 0. Check the type, unit ID of ID and the ID of the page on the page.
  2016-02-01 15:21:33.63 spid8s error: 912, severity: 21, State: 2.
  2016-02-01 15:21:33.63 spid8s Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' has detected 3601, an error state 5, severity 25. It is a serious condition that could interfere with the normal operation and the database is taken offline. If the error occurred during the upgrade of the 'master' database, it will prevent the entirety of a SQL Server instance to start. Review the previous entries in the error log, take appropriate corrective action and restart the database so that the script upgrade steps run until the end.
  2016-02-01 15:21:33.64 spid8s error: 3417, severity: 21, State: 3.
  2016-02-01 15:21:33.64 spid8s cannot recover the master database. SQL Server cannot run. Master of restoring a full backup, repair or rebuild. For more information on how to rebuild the master database, see the SQL Server online documentation.
  2016-02-01 15:21:33.64 spid8s stop SQL Server launched
  2016-02-01 15:21:33.64 spid8s trace SQL stopped due to server shutdown. Trace ID = "1". This is an informational message only; no user action is required.
  2016-02-01 15:21:34.70 spid8s error: 25725, severity: 16, State: 1.
  2016-02-01 15:21:34.70 spid8s an error occurred trying to empty sessions extended all running events.  Some events may be lost.
  2016-02-01 15:21:34.71 spid13s the SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [MSSQLSvc/servername.urldomain] for the SQL Server service. Error: 0x2af9, State: 61. Administrator should deregister this SPN manually to avoid client authentication errors.
  2016-02-01 15:21:34.71 spid13s the SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [MSSQLSvc / servername.urldomain:1433] for the SQL Server service. Error: 0x2af9, State: 61. Administrator should deregister this SPN manually to avoid client authentication errors.

  -----------------------------------------------------------------------------------------------

  I would be grateful for all the help I can get. Thank you.

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  TechNet Server forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Very slow download after the update February 10

  After the update automated around Feb 10th, photos are slowly and web video a crawl - for every one second of game-playing, it hangs for 10 seconds or more.

  Download Adobe software update takes forever - about 10 kb/s or less. Everything slowed to a crawl.  What is going on?

  I have a DELL reconditioned with XP and a custom-built Q8900 Intel Vista and it happens on both machines.

  I think of restoring to the point of pre-2/10 but do not want to be vulnerable.  Any person with knowledge or patch fix, feel free to post... help!

  johnnydj,
  After testing mode safe mode with networking, I suggest that you make sure that your NETWORK card drivers are up to date.  You can also see if there is a firmware upgrade for the router you have.  Alternatively, you can perform a clean boot to see if other software can interfere with your system.  Also, make sure that your security software is up-to-date.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with my keyboard after the update using drivercanner

  Original title: my keyboard stopped working after the last updae

  OTEVA here

  Hi I have a problem with my keyboard after update using drivercanner I need help fixing this cause I tried looking for the installation of the upate that cause, but I don't have where to look.

  try a system restore to a date preceding the update.

• iPad will not restart after the update iOS9.3. Should force us the reboot?

  iPad will not restart after the update iOS9.3. Should force us the reboot?

  By restart do you average will not turn on?

  There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

  Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

  You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

  http://support.Apple.com/kb/HT1414

• Missing Bootcamp after the update to El Capitan

  Threre was a 100 GB bootcamp partition and a 400GO OSX partition before update Mountain Lion to El Capitan.

  Here's the output of diskutil list after the update:

  

  I could have made the mistake of the reconstruction of the Macintosh HD with DiskWarrior directory to try to solve this problem.

  quick search of TestDisk, we get:

  

  By selecting one of the [Boot] data entries in the MS 6174 is obtained:

  

  Impossible to find all entries containing the SVI. Is there hope?

  Watch disk utility another partition? This partition installed Windows, and if so, it is no longer start?

  Looks like it shows that your hard drive is partitioned because it shows the scheme of 500 GB partition and then only 400 GB for Mac HD. Shows also the 40 GB of data to Microsoft.

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• Start computer after the update problem

  I just have an automatic update from Microsoft to settle on my computer and automatically restart to complete the process. Everything seemed fine with the installation to reach 100%, as it has been taken out of windows. However, my computer now not turn back at all! I've had no problem with the computer before.

  The computer is an Evesham axis R6 XT and I am running Vista Home Premium. Is it possible that this update caused a conflict with my material that could prevent the computer from starting completely or is it just a complete cooincidence that the computer died during a restart of the update?

  The computer has power as when I try and turn on the computer, it shows a blue light continuous flashing on the front (not the HD light) but it feeds any upward? Suggestions regarding the problem would be welcome.

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also, once you get in Vista:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• After the updates of windows, the computer stops responding with a black screen at startup of the system

  Original title: Windows XP does not start after the update, no error message

  Has made no changes to the system, but the last thing that happened was an update of Windows security on stop.

  Now when I boot, the BIOS p.o.s.t. shows good HDs, good DVD-Rom, RAM, but Windows never starts, goes just a black screen, HDs are not accessed.

  -F8 does nothing, can't use the last known good Config or Mode safe

  -Change boot order in the BIOS to boot from the Windows XP DVD, hoping to get the recovery console, but the same thing: black screen, no attempt to spin-up DVD or HDs.

  -Removal of mobo battery to reset the CMOS, no joy.

  -Checked and re checked all connections inside.

  -Stripped devices and added one at a time, no joy.

  -Traded-in an old video card in case it was difficult to generate the higher res gfx, no joy.

  I was construction/upgrade / repair my own PC for 3 decades and can usually solve the problem and fix it myself, but this one me completely baffled.

  Any suggestions?

  Hi Cougarific,

  We recommend that you repair your Windows installation in according to method 2 of this article and check the result.
  See computer stops responding with a black screen when you start Windows XP
  

  Note: When you perform a repair installation, it restores the current installation of Windows XP to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows XP disc.

  Visit our Microsoft answers feedback Forum and let us know what you think.