Start computer after the update problem

Similar Questions

• I'm the only person who becomes a BSOD when trying to start InDesign after the update 2014.2?

  I tried several times to start the application, only to have planting my whole system just until it is fully charged. I almost saw him display the initial screen of "What's New", but that's all. I tried to open it in safe mode, but that did not help. And of course, go to real Adobe technical support is almost impossible.

  Any suggestions before I have uninstall ID and/or throw my computer against the wall?

  UPDATE: after 45 minutes of listening to some of the worst on the planet hold music, I finally got to the Technical Support. As I mentioned somewhere, this exact error that happened after a previous update in November 2014 > trying to launch the application, the system will BSOD just until it is fully charged. I still had the November issue and could give that to them. Basically, she repeated the previous 'fix', and who took care of the problem. Now I'm up to my elbows in three hours delayed. Yay.

  For the record, the fix was browse to C:\Program Files\Adobe\Adobe InDesign 2014\Resources CC and completely remove the folder of the CEP. She told me that I was losing only display "What's new", no element of vital program. \

  Yes, I realize that there is inevitably a deeper problem in my system, but it only showed up to these two times. My computer and I have conducted in-depth and comprehensive tests and trying to find the underlying problem of the system, but we cannot. Until we do, however, I have to just keep an eye on the future updates of ID, and at least now I know what I can do to relieve headaches.

• Satellite Pro L300 will not start until after the update of the BIOS of 1.30 to 1.50

  Dear all,

  I have a Toshiba Satelklite Pro L300 and had no problem for the last 4 years. Last Monday, I replaced my hard drive with a new one and after installing a new copy of Windows XP Pro, I have downloaded all the drivers on the official site. After my last update, I have updated the BIOS to version 1.30 to 1.50. After a few seconds my laptop has rebooted and was not able to load Windows and / or recognize my new hard drive.

  I tried several methods, using safe, optimal Bios default etc but was unsuccessful. IO could not even re - install Windows as the hard drive is not being recognized by the laptop. I've formatted the HD again through my desktop Pc, but still have the same problem.

  I am really worried and would like immediate help!

  Best regards

  Engelbert

  > I formatted the HD again through my desktop Pc, but still have the same problem.
  What happen exactly when you turn on your laptop?

  Set the BIOS as deult and try to install the original recovery image that you got with your laptop. If everything works OK that means upgrading the disk HARD was a success and there is not a serious hardware problem.

  After this check, you can try again to install Windows XP Home edition.
  Please post comments.

• No screen of the computer after the update of Windows 10 anniversary

  I just got a new P50 with IPS 1920 x 1080 screen, Samsung 512 SSD nvme and graphs of M100M.

  I noticed that after installation, its only Windows 10 worm 1511 (10586.545) instead of the last 1607 (14393.82), I have the new version works very well on my current W530 so I decieded to update, BIG MISTAKE.

  So basically after the Lenovo logo update appears as usual and then it starts with windows, but there is no display on the laptop, I can see the HARD drive activity and the lights on the keyboard so I know that its still doesn't work. I decided to plug in an external monitor of DP mini and I could see my screen finally but nothing on the LCD screen.

  Everyone knows this? You are looking for assistance.

  
  

• Program after the update problems

  Hello, I had a hard time with updates on 7.  The last challenge has been with outlook do not open, even with the system restore.

  I used it to fix outlook, type "run" command > outlook.exe/resetnavpane

  I tried similar things for the desktop gadget for the time that it did not work.

  I have the clock and the calendar, they came back, but the weather went and now I can't open, even with the admin, the Google desktop gadgets Gallery.

  It was after the last automatic update a few days ago.

  Restore does not fix it.

  I need a fix, as I had for outlook.  But I forgot where I found it, I may have searched online and came across it.

  Who knows what other programs do not work I have just not used!

  Why are the updates mess up my system?

  7 came on this machine.  It is a mid-range Acer.

  OK, hope that someone has some wisdom.

  Thank you!!!

  * Title *.
  Updates programs, fixed bug with outlook, now a bug with Google desktop gadgets Gallery and who knows what other programs I tried not to spoil.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. If of Spybot's Tea Timer is enabled, please disable it and leave this option disabled until we're done here. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  NB: If you don't fully understand what Tea Timer does and how it does, leave it off in a way permanent.

  3. close all open applications (that is, anything with an icon on the taskbar).

  4. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. now to reset IE8 by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  6. now to reset Windows Update by...

  How to reset the Windows Update components?
  [Ignore the section to APPLY to;] KB971058 access via IE8 32 bit only. Run the difficulty in DEFAULT and AGGRESSIVE mode]
  http://support.Microsoft.com/kb/971058

  7. a last reboot & test. If the problem persists, see if disablingand then enabling the Windows Firewall Comodo Firewall resolves the behavior.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Restart the computer after the updates when I'm still working on things that I have to save first.

  When my computer installs updates, I know that it is important to restart my computer to allow the changes take place. But it does it on its own while I'm still working on things. How can I change something in a frame on Vista so it is not stopping the things I'm trying and ruin everything. He also said that being shut down windows when it restarts for the updates and then freezes when it turns back on. Help, please.
  Laura :)

  Here's how to uninstall updates (if needed) and how to change the update settings:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install one at a time.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Lost all sound from my computer after the updates

  Driver Audio original was ahead AC 97 Audio for VIA (R) audio controller.  During updates, this changed to C-Media AC 97 Audio Device. Now I have no sound.  When I check in the properties for C-Media I get the message "this device cannot start [Code 10] any ideas how to get back my sound."  Thank you

  If you still get the wrong driver of WU on your sound card, hide the update.

  You go to the website of the manufacturer (sound card) and get drivers.

  TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.

• I have not re start the computer after the update.__What of windows that I stop front of the computer?

  My XP does not work after update on February 10, 2010.
  So my vista never stopped for the day.

  I have uninstall all update February 10 on programs and features .
  KB971468, kb974145, kb978251 kb975560,
  KB977165, kb905866 kb978262 kb890830
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Checked virus AVG and Adaware.

  Is it way before reboot memory diagnostic?

  What should I do before closing this computer?

  I also made down them before the stop.

  Restore Windows Vista to a previous state
  http://www.bleepingcomputer.com/tutorials/tutorial143.html#restore

  Check The Windows Vista memory diagnostic tool
  http://www.bleepingcomputer.com/tutorials/tutorial146.html

  Replace configure Microsoft Update automatic update not .
  http://www.Microsoft.com/NZ/protect/computer/updates/MU.mspx

  I'm glad that my Vista is not working properly.

• CC of Photoshop starts only after the update not

  HY everybody,

  This afternoon, I did an update to photoshop CC (from Creative cloud Panel).

  After restarting my computer photoshop CC starts not more. It is said

  Cannot find ahclient.dll, try to reinstall the software

  It seems an odd error, couse installed Photoshop CS6 begins regular without error.

  How can I solve? How can I download a new package of Creative cloud Panel?

  Thanks to you all.

  Flavio

  This error comes usually when there is a corrupted installation of the Ps (or the user has deleted/moved the affected files). In this case, you need to install PS CC after using cleaning tool (http://www.adobe.com/support/contact/cscleanertool.html)

  Please confirm that you initially installed Ps of CC app itself?

  Kind regards

  Ashutosh

  [email protected]<>[email protected]

• I have 3 versions of Photoshop CC and 2 versions of first CC installed on my computer after the update. Can I uninstall one of them?

  After my laptop updated my applications, I now Photoshop CC (32 bit), Photoshop CC (64-bit) and Photoshop CC (2014) display installed on my computer. I also shows CC first and first CC (2014). Can I uninstall these they take up valuable space on my primary SSD? Help, please. It sounds ridiculous.

  I just uninstalled Photoshop CC, CC Indesign and Illustrator CC and did not experience any hitch.  EDIT: If you have plugins refer to John T Smith post below. I don't.

  Now time for the mug shot:

  -C' is a year + since switching to the CC; What does in the passage your brand identity at a "SaaS" society if you are not going to do rolling releases? You don't just want to pack and ship the physical boxes more? It is amazing to me. Tell your developers/architects to install some case of Linux (preferably Arch) and see how they handle upgrades of the package. If you guys weren't so phobic of Linux you might have picked up on how do it with elegance the package/app updates.

  -Who, in Marketing thought "well *, if we have a fragmented, CC ecosystem might as well just stick at the end year. If this is going to be your naming convention you should push an update to rename the former CC (2013).

  S ' Please, refresh your creative cloud app immediately. As @unconsenting posted before, HD space is luxury and cannot be wasted. Why not have a prompt asking if the user wants to uninstall any previous version? Before you find the uninstall file, I threw a look through the CC app for a Uninstall button does not exist. Ridiculous that I had to open the Applications folder (or sorting through the many Adobe uninstall applications, which displays to light) and 3 run uninstall applications, each uninstall a 5 min, after spending 15 minutes the new update running

• OHS start fails after the update of the portfolio

  Hello

  We try to change the SSL configuration for a standalone OHS 12.1.3 install on Windows 2008 R2.  This configuration change in question create a new portfolio and the case of confidence add appropriate using orapki then the parametres.conf update.  Attempt to restart the component of fails with the error:

  [OHS] [ERROR: 32] [SST-2054] [MOD_SSL. C] ... Init: () a full restart is necessary when wallet filechanged on-the-fly!

  We thought that this meant the server should be restarted, but it does not solve this error.    Someone else has encountered this error and how to solve?

  This brings me to another question: should use us a provided Oracle administration tool to update the settings ssl instead of manually update the fichier.conf?  If Yes, what is the appropriate tool to use when the SST is installed as independent?

  Thank you-

  Scott

  It is due to missing libraries in windows OS that prevents OSH to start in FIPS mode as below bugs

  bug 18895629
  bug 18875548

• When you enter an address in the address bar, the only way so he can go to the page is by using the button "go to address". It started just after the update yesterday.

  Updated yesterday, I tried to pull the first site in my combo and it wouldn't go. I tried to hit enter, and it wouldn't go. Finally press the address button reach, and he went. Very annoying.

  You have the add-on installed AVG safe browsing?
  
  If so, disable it until AVG to fix it.

• All my files and pictures have been deleted and all my settings for my computer after windows update

  Original title: update of Windows 8

  All my files and pictures have been deleted and all my settings for my computer after the update of windows. I need some answers! Microsoft you need to find something to say to me. WTF! Your update has ruined my computer

  Shawn,

  I think this isn't the Windows update that caused this problem. It could be something else the cause. Windows Update never removes any of your files and folders stored in the computer.

  You can try a system restore to a previous point when the computer was working properly.

  see this link:

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

• Unable to start the computer after the installation of Windows updates

  original title: same problem with the other oddities.

  I also have a computer down the update.  Although I tried several times to start the computer from the installation CD re, when I get to the page where I have options to fix or exit, locks from my computer to the top and will go no further.  Suggestions how to get the computer to boot the CD and allow me to choose the repair option without locking up?  Thank you!

  I finally managed to get the reinstallation CD to load.  I also spoke with telephone tech support at Microsoft who helped me to descend KB977165 my system.  After that was removed the computer booted without error.  By MS tech, I am also running the anti-virals and malicious programs to see if they detect all the other infections.

  Originally, the CD would load to the point of being able to choose between the options: continue to fix or exit.  At this point, the computer froze upwards and would not all repairs in order to remove KB977165.  Microsoft launches a call again tomorrow in order to install safety free bug so far.

  Thanks for your reply.

• After the updates of Windows 7 computer does not start

  I received a notice from the system Windows 7 updates have been downloaded and available for installation. I selected the installation of updates. After the updates when installed I was in charge to restart. The computer will not start at the top. It tries but stops at a blue screen with a cursor. I tried to boot into "safe mode" and get the same. I booted from my original Windows 7 disc and I went back to my restore point before the update. It appeared to restore successfully but I still get a blue screen.
  What is my next course of action? I certainly DON'T want to format the drive and start again.

  The only thing I can say is that I know that you will not like to hear.

  It is to re - install Windows 7 (do not enter the product key and uncheck the 'Activation').

  Then immediately turn off automatic updates.

  Then, go to the Microsoft Update site and only install one update at a time (make a note of the number KBXXXXXX), restart and check that you do not get the blue screen. Then download the next update and repeat the process until you either find to have installed the offending update or updates without any problem. If all goes well and the problem did not repeat, then you can activate Windows.

  If you find yourself always with the blue screen after a given Update call Microsoft and tell them. If they won't listen, then create a new post on this forum, making reference to the question of the blue screen AND the number associated with the update. Also post the number here if I can do some research on the problem.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.