Restore from different database Rman backup RMAN

Similar Questions

• ORA-01152: 1 no file has been restored from a sufficiently old backup

  Hi all
  
  I have restored my database,
  
  and after it's over, I've tried.
  
  RMAN > alter database open resetlogs;
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure to modify the order db at 2010-05-26 14:53:08
  ORA-01152: 1 no file has been restored from a sufficiently old backup
  ORA-01110: data file 1: ' D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSTEM01. DBF'
  
  
  is there a solution to the situation?
  
  Thank you
  
  Ugur

  Here is the explanation:

  ORA-01152: file string has not been restored from a sufficiently old backup

  Cause: An incomplete recovery session was launched, but an insufficient number of logs have been applied to standardize the data base. This file is always in the future than the last applied log. The most likely cause of this error is forgetting to restore the file from a backup before proceeding with an incomplete recovery.

  Action: Apply more marbles until data is coherent or restore the database from a previous backup and recovery of repeat file.

  Also, check out the following link:
  http://oraware.blogspot.com/2008/05/ora-01152-file-1-was-not-restored-from.html

  Published by: Kamran Agayev, a., 26 May 2010 17:02

• How to create views of data from different databases tables in2

  Using Oracle 10.2 g
  
  I have 2 databases Gus and the haggis on schema Comqdhb.
  
  Glink indicates a link of database between Haggis and Gus
  
  In Gus, there is school that contains columns with same name upn, grade, subject, student of tables...
  
  STUDENT
  UPN
  academicYear
  
  Object
  
  Object
  
  GRADE
  examlevel
  grade
  
  SCHOOL
  SN
  
  In HAGGIS raising tables, grade, teacher containing columns upn... desc below.
  
  STUDENT
  UPN
  
  GRADE
  grade
  UPN
  academicyear
  level
  
  
  
  Create views in your database HAGGIS who join their all the qualities of the review. You should have a point of view that will produce the following relationship:
  examGrade (upn, subject, examlevel, sn, rank, academicYear)
  
  So I need to create a view that gets the data from the tables in the databases.
  
  create view as examGrade (upn, subject, examlevel, sn, rank, academicYear) like some s.upn
  
  
  But I don't get the selection of a column of 2 tables in different databases
  
  I mean if I said
  
  Select the UPN in comqdhb.student@glink,comqdhb.student;
  Select the upn name in comqdhb.student@glink,comqdhb.student
  *
  ERROR on line 1:
  ORA-00918: column ambiguously defined
  
  Help me, thank you.

  Hello

  Rider wrote:
  The issue is that I can't understand that I should create the view by the union of the haggis and the two gus data or only haggis.
  the reason I believe I need to combine the two is mentioned * "" create views in your database schema HAGGIS who join their all the qualities of the review. ". *
  By the mention of creating views and who join their all the qualities of the review, it probably means to obtain the data of the GUS and HAGGIS.

  This is my interpretation of the assignment, too.
  If you ask just the tables on Gus, you will get the ranks of three of the four schools: it's not all examination classes.
  If you ask just the tables on Haggis, you will get the ranks of any of the four schools: it's not all examination classes.

  2nd prob is that if have decided to create a view that gets the data from these two gus and therer haggis would be a lot of duplication involved due to the cross product

  Why would there be "repetition involved due to the cross-product"?
  If the quuery of Gus produces 100 lines, the request of product Haggis 30 rows, then the UNION of the two will have 100 + 30 = 130 lines (assuming, as you say, each student is at school only one).

  the query I wrote is

  Create view examGrade (upn, subject, examlevel, sn, rank, academicYear)
  as
  Select distinct s.upn as upn, g.subject as topic,
  g."LEVEL" as examlevel, g.grade as rank, to_number (g.academicyear) as academicyear
  of s comqdhb.student, comqdhb.grade g
  s.UPN, sb.subject, g.elevel, g.grade, s.acyr select Union
  of comqdhb.subject@glink sb,comqdhb.student@glink s,comqdhb.gradevalues@glink g;

  You should not write, not to mention not formatted zip code. I have a little time I can devote to answering questions in the forum. Do you want me
  b spend this time formatting your code, so I can understand the question, and no time to answer, or
  b spend only a little time reading understanding your code and spend most of my time to help you?
  I would prefer (b), but the choice is yours.
  See the statement that I posted in my last post for an example of the formatted code. You see how it appears in a box with a police fixed-width, and multiple spaces are printed? This is because I typed {code} (all small letters), before and after the section I wanted formatted.

  At least put each table in the FROM clause on a separate line, so it is easy to know if you have enough join conditions.
  If you have N tables in the FROM clause, you almost always have at least N-1 join conditions that specify how the tables are linked together. For example, if talk you about two tables, quality and student, you expect to see a join condition that tells you when you have data in a table, how to find related data in the other table, such as

  g_gus.upn = s_gus.upn
  

  No no no join conditions will cause "repetition involved due to the cross product.

  I downloaded my info here
  http://www.upload4free.com/download.php?file=44201983-School_ExamGrades.PDF

  
  http://www.upload4free.com/download.php?file=184648736-ExamGrades_Case_Study_2008FINAL.PDF

  Sorry, if there is data as long as you can't post here, there is much too much for me to read.
  Make a sample set, containing a few (maybe five) students and a few shades of each student. It is fine to copy a few lines of your actual data.

  That's all the time I have for today. I can't wait to get the data and formatted requests.

• I need a few files to restore from a time machine backup to a different MacBook Pro that is connected to the same network

  Hi, I recently "lost" my MacBook Pro because of water damage.  Fortunately, I've been using time Machine\Capsule and I have a MacBook Pro that is connected to the same network/device.  I need to restore a few files in the backup TM of the computer 'lost' on computer 'work '.  I was able to 'Browse' the other TM backup (click the icon TM plus the button 'Alt').  The Web browsing is extremely slow (took about an hour to break down / find the file on the network).  However, I tried to copy the file and I get errors of the alias.   Please advise me on what I am doing wrong.

  Thank you

  ggnpeter

  PS My OS is 10.9.5

  Visit Time Machine FAQ of Pondini helps with Time Machine.

• Cannot get permission to access some files restored from a windows vista backup

  Hello. I just installed windows 7 on a new hard drive. I bought the upgrade to windows 7 Home premium and I had to install vista on the new hard drive first then windows 7.

  I have all my files backed up on an external hard drive and I used windows vista backup and restore to do.

  I have now restored my files on my new hard drive using windows 7 backup and restore.

  I see all my files and folders, but the thumbnails are missing and when I try to actually open a file, a message informs you that I don't have permission to access.

  I tried to click with the right button on the files and changing the security, property, sharing and options, all to nothing does not.

  I tried a few ways to restore my files too, but nothing works.

  If I save a newly downloaded or created file (for example, a photo that I found on the internet) in the same folders, there is no problem and I can access, so the problem isn't that I don't have access to the records.

  Another weird thing is that I can access some of the restored files, but no more than them. I can't think what it is on those I can access that should make them different from those that I can't.

  So far it does not my simple PC! Can anyone help please?

  I should add that I am the ONLY user of this computer, and it is not on a network. Previously, it was the same when I am running windows vista. This is why I'm the only person who should be able to access the files.

  Same problem here after restoring a file backup of Windows Vista to a new installation of Windows 7. This solution worked for me: go to the command prompt, change the drive or a directory, you have problems with and type this:

  ICACLS * / reset/t

  Edit: You need to start the command prompt as an administrator to do. Find it in the start menu, then right click and choose 'run as administrator '. Then use the command as shown above.

• How to restore from a backup after creating a new Raid 0?

  OK so I have time machines of my old hard drive, installed my new and raid 0' ed them. Now I Steelworkers my bootable thumbdtive (who was be Yosemite) to start my el capitan backup and it crashes at the end. After the restoration, the computer stops and recharge, but then crashes to the screen with the apple logo. Someone knows the right way that I should be restore? I tried just do a plain redownliad of my bootable disk but it says it did not work and may have been corrupted. I tried deleti g and recreate my raid 0, the same message... Looks like that because raid 0 for Mac will not create a recovery partition, I do a recovery Internet now just to recharge the mac from scratch... Any ideas on how I should address?

  Hi Isakale,

  I understand that you're having trouble for OS X installed and restored from your Time Machine backup. In a situation where you work with a configuration of non standard volume for your OS X installation, you can consider installing OS X of the recovery of the Internet, the upgrade to the desired version of Mac OS X via the App Store, then your Time Machine data migration using the Migration Wizard, rather than recovery.

  Migration Wizard copies all your files to your new Mac so that you do not have to the do it manually. If your files are currently on a Windows PC, follow the steps in the migration of the PC instead. If your new Mac uses OS X Mountain Lion or earlier, follow the steps of Mountain Lion instead.

  Move your content to a new Mac
  https://support.Apple.com/en-us/HT204350

  Recent Macs include the ability to run directly from a Web OS X Recovery version. Your Mac will automatically use this feature when the recovery on the startup disk system is not available. For example, if your boot drive is a problem, or if your boot drive has been replaced or deleted. Recovery of the Internet allows you to start your Mac directly from Apple servers. This system starts running a quick test of your memory and the hard disk to check for hardware problems.

  Recovery of the Internet initially asking you to select a Wi - Fi network and enter a password for the network if necessary. Then Internet recovery downloads and starts from a system recovery image. From there on, offers the same options and utilities like system recovery on a startup disk.

  Some Mac shipped with OS X Snow Leopard can use Internet after installation of OS X Lion or later and a software update.

  OS X: on OS X Recovery
  https://support.Apple.com/en-us/HT201314

  If you want to reinstall the version of Mac OS X included with your Mac, store the command-Option-R at the start instead. This starts your Mac recovery of the Internet.

  How to reinstall OS X on your Mac

  https://support.Apple.com/en-us/HT204904

  Sincerely

• Fusion drive: restore from Time Machine - "the disc cannot be erased."

  Hello

  On a new iMac (end of 2015), I need to wipe my drive of Fusion of 3 TB (El Capitan, unencrypted, just 1 partition, no Boot Camp partition) and then restore a backup Time Machine (made on a previous iMac, also with disc Fusion of 3 TB (El Capitan, unencrypted, just 1 partition, no Boot Camp partition).

  According to the document from Apple: https://support.apple.com/en-us/HT204904 'restore from a Time Machine backup' I...

  1. restart with cmd + R (later also tried cmd + alt + R and also a USB bootable of course El flash drive)

  2 selected "backup restore Time Machine"

  3 selected my external backup disk, Time Machine

  4 choose the most recent backup

  5 selected "Macintosh HD" as a destination and click "continue".

  ... but then the following message appeared "disc cannot be erased.

  

  Then I tried to erase 'Macintosh HD' via disk utility:

  1. restart with cmd + R (later also tried cmd + alt + R and also a USB bootable of course El flash drive)

  2 choose disk utility

  3 choose "Macintosh HD"

  4. click on tab "delete".

  5. click on the button 'clear '.

  ... then I got the error message:

  "Clear process failed..." Details: Dismantling DIS3 - deletion of logical volumes of the logical volume group - cannot remove the basic storage logical volume. Operation failed... »

  I was in the 'loop', the only way out was to "Reinstall Mac OS X", and then after many hours, he had once again my old installation flubbed with everything I wanted to get rid of!

  How to restore my backup Time Machine - nothing more or less - to my new iMac?

  I lost 3 days now with this problem. I really hope someone has a solution.

  Thank you very much!

  Apple did not provide an easy way to recover from this condition. If you are not able to carry out these instructions, please someone more experienced to help you get. One option is to take an appointment 'Genius' on an Apple Store.

  Starts the Internet recovery mode by pressing the key combination command-option-R to start ringing. Release the keys when you see a spinning globe.

  Note: You need an Ethernet or Wi - Fi connection permanent Internet to use recovery. It will not work with modems USB or PPPoE, proxy servers or networks that require a certificate for authentication.

  In the OS X Utilities screen, select

  Utilities ▹ Terminal

  in the menu bar at the top of the screen, not one of the items in the OS X Utilities window.

  Follow the steps in this thread to ASC to split the fuser unit. The long string of letters, numbers and dashes you will need to enter will be different in your case. Copy and paste into the command in the Terminal window.

  This will remove all data from the fuser unit, then you had better be sure of your backups.

  Quit the Terminal, and then repair the Fusion drive (see "Troubleshooting" on the linked page.)

  Quit disk utility. Then you should be able to install OS X and restore your data from a backup in the main screen.

• Help please... Replaced the hard drive of MBP, restored from TM, but the Windows XP virtual machine does not start

  I replaced the 250 GB hard drive in my MacBook Pro early 2009 with a 500 GB drive, it the Mac OS extended (journaled) format and restored from my Time Machine backup.

  Now when I try to start my Windows XP virtual machine (using Fusion 2.0.6... planning upgrade to 3.1.2 but wanted to validate all was well first), I get BSOD, even in safe mode.

  I have my vm separately saved on a network drive data files based on things that I had read before, I do not think that TM backup of virtual machines. However, a friend with a similar setup with more knowledge I think because I could see my Windows XP vm VMWare listed under 'Documents' in Time Machine showing its full size, it has actually saved and there restore it. Apparently he has done this successfully before.

  Should I have partitioned the hard drive? I don't think that my previous drive has been partitioned. Don't know what to do now.

  TIA!

  Katie

  To be clear: you have restored VMs from the disk or network time Machine?  And if the network drive, what backup method you use?  (i.e.: have you just copied engine off the computer virtual package or not?)  Can you copy/restore the virtual machine to the network again drive?  What is a virtual machine that has the error, or other virtual machines have problems?

  Time Machine backup correctly a virtual power off machine. But since Time Machine works automatically, you often will get not a consistent backup unless you do some tricks to make sure Time Machine backup only when you use a virtual machine.  (i.e.: turn on Time Machine only when you're done with the virtual machine.)  Thus, it is normally recommended to exclude the virtual machines from Time Machine and use another method to back up virtual machines.  Your friend is lucky or is only backup virtual machines powered off.

  Should I have partitioned the hard drive? I don't think that my previous drive has been partitioned. Don't know what to do now.

  The Mac player Paritioning is unnecessary unless you use Boot Camp or have required another for the partition.

• Import data from different DBs to HFM Application using FDQM

  Hi gurus
  
  1. how to import data from different databases to HFM Application using FDQM?
  Do we need to write scripts for integration in FDQM, or is there an alternative method, we need to do?
  
  concerning
  Dev

  Data import is long to explain,

  To be more precise,
  1. you would establish a connection with your source systems and destination where you pull the data.
  You can do this by registering adapters of integration for send_break_action source machines
  2. you would then upward some formats for importing, maps and tables of control.
  Please go through the Administrator's guide,

  One of the experts will help you better understand.

  Kind regards

  David Martin

• Virtual machine does not start after restoring from Time Machine to the new Imac

  I got my IMac replaced by Apple, after that they could not fix the old one.  They did a full restore from a Time Machine backup.  The virtual machine does not open now.   When I navigate to the file to try to open the virtual machine at the VMware logo in the bottom right of the icon displayed with large yellow exclamation appears on the icon?  Anyone encountered this problem before.  I'll take the Imac in Saturday if I can not solve.  The machine has the same size as before.  There are a few aspects of sharing with the Mac application miss me?

  According to the MacVirt.vmdk folder, you have the right number of segments of shared disk so you should be able to create a new VM by pointing to the disc in the new VM Wizard by pointing to the MacVirt.vmdk file.

  Note: After you create the new Virtual Machine, I would not suggest the Virtual Machine to stop, pause and close merge and then move all *.vmdk files in the package of the virtual machine, and then manually change the computer configuration files virtual .vmx and change the path to a little to view the MacVirt.vmdk file.  In this way, everything is in one package and is easier to maintain.

• How to use backups RMAN to restore a RAC database to single instance on another host?

  How to use backups Rman to restore a RAC database to single instance on another host?

  I tried to copy these inline for you:

  ------------

  Backups RMAN disk HowTo restore database RAC to single Instance on another node (Doc ID 415579.1)

  Down

• Full restore of the database of RMAN cross-platform

  All the
  
  I have a database 10.2.0.3 on Solaris 10 OS.
  
  I did a full upward (level 0) this database using rman with auto save on. I'm trying to worl on a scenario where I could restore that backup on another linux machine. so I copied all the elements on the target linux server backup. go to a local installation of RDBMS (10.2.0.3) on the linux machine I'm trying to restore the database... but does not yet...
  
  When I deliver restore spfile or restore the control file a + < backup file name > +; the guest continues search in rear location that responded to the questionnaire didn't tell no piece found backup... Here are the encode stage, I'm...
  
  
  1. set up env on the linux server
  
  2 rman target /.
  
  (instance not started but rman to connect)
  
  3 set the DBID = + < ID DB data source running on Solaris > +.
  
  It run set dbid =
  
  4 startup nomount
  
  as the pfile/spfile file is not available in $ORACLE_HOME/dbs on a linux machine picks it up pfile by default however, but the instance stars no Assembly...
  
  5 restore spfile to ' / u01/app/oracle/product/10.2.0/rman_bkp/c-300009955'
  
  Here, he is not able to restore any thing.same is the case with the control file.
  
  Ideas please advice
  
  Sarat

  Sarat Chandra C wrote:
  Thanks for the referance. Now, I understand that I am not able to use the transportable database command to carry the entire db. However, there is a line in the 'Cross-Platform Database Transportable Restrictions' that says ++ 'main restricting cross-platform transportable database is that the platform of source and destination must share the same endian format. For example, while you can transport a database from Microsoft Windows to Linux for x 86 (the two little endian) or HP - UX, Aix (the two big endian), you may not carry a set of base HP_UX to Linux for x 86 using this feature. You can, however, create a new database on a destination manually, and necessary transport of tablespaces of the source database platform using cross-platform transportable tablespace as described in "Cross - Platform Tranportation Tablespace: CONVERT DATAFILE or TABLESPACE. » +

  I understand that if we are willing to carry each tablespace from Source to target individually, may then be able to replicate a transportable database. Fact the transportable tablespace have not all restrictions has obtained from the database of transport compared to the platform and Endian? Please specify.

  Also is there a matrix of support for thr transportable database and tablespaces which we could see?

  Kind regards!
  Sarat

  Sarat,

  The same restriction that is there for the transport of the whole base is quite real for the transportable tablespace as well if you go to the cross-platform. Endian must match across platforms that only you can do otherwise, as the database feature, you must convert the source file to the target-endian.

  If you look at the doc of reference order of unlocking Tablespace
  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14194/rcmsynta063.htm#RCMRF1919

  This restriction is documented here in addition to the other restrictions
  ,
  >
  Restrictions and antonyms

  Limitations on the creation of tablespace portable games described in the Oracle database administrator's Guide apply to transport backup storage spaces, with the exception of accountability read-only storage.

  TRANSPORT TABLESPACE does not format endian conversion. If the target platform has a different endian format, you must use the CONVERT RMAN command to perform the separate step of conversion of data files endian format portable overall.
  >

  HTH
  Aman...

• RMAN Backupsets restore from a BAND on the disc?

  Hi guys,.

  Please help me, we back up our 11g i.e. databases (extra strength 0, level 1 & archivelogs) disk with RMAN and then subsequently run another script for the backupsets of the DISC on a backup TAPE.

  Now, I would like to know, how to restore these backupsets BAND on the DISC with RMAN back if possible? We are using Veritas NetBackup for Oracle - version 7.5.

  PART OF THE SCRIPT EXAMPLE DISK to TAPE BACKUP:

  run

  {

  allocate channels ch1 type 'SBT_TAPE ';

  Send "NB_ORA_SERV = master_server_name, NB_ORA_CLIENT = client_name, NB_ORA_POLICY = netbackup_policy, NB_ORA_SCHED = schedule_name';"

  backupset backup all the format = "${ORACLE_SID} %U _full_tape_" no saved;

  output channel ch1.

  }

  Kind regards

  ZKM

  Hello, with rman you can restore the files of data, controlfiles, archivelogs, storage... (IE, your database), but I believe that you cannot restore a stb to a disc backupset backupset, you restore a backupset o filecopy to a "restore" object, not a backupset. :

  

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10643/rcmsynta2008.htm#RCMRF149

  You can restore it with:

  RMAN > restore database the tag ' '.

  If you have configured channel decoders and disk channel, rman will first try to restore from disk and if it is not backupset on disk, rman restore of stb.

  RMAN: Creating and restoring backups to disk and tape (Doc ID 1397703.1);

  Kind regards.

• RMAN restore to different host

  Hello
  
  
  What do restore via rman, (not dual)
  
  If I startup nomount another instance with the name of the different database.
  can I perform rman full restore to a different database? (I bring controlfile first and data files, I'll also put the rman backups in the same location)
  
  or
  
  Is it necessary to have same db and the instance name?

  Right. Because the Controlfile name must match the name of the database.

• How to set the incremental backup of level 1 to restore on a different database

  Hello

  I have a question what is annoys me all week.

  I have 2 databases. ORCL and ORCL2. ORCL2 is an auxiliary ORCL database. ORCL my database is backup incrementaly Sunday level 0, other days level 1. Now, I would like to update my ORCL2 db every night to be synchronized with the ORCL database. Is this possible? I have Oracle Standard Edition, so I can't use Data guard. If you can help me I would be very thanful. Or if you could send me a link to some textbooks.

  I have db Oracle 10.2.0.3 Standard Edition

  Windows Server 2003 Standard edition

  With respect,

  Ivan

  Hello Ivan,.

  You can recover the database duplicate, once created each day with an incremental backup of the target database.

  What you need here is a simple restore to another host without opening the database with resetlogs. RMAN: Restoring a backup RMAN to another node [ID 73974.1]

  Thank you