Restore settings from the generic pnp monitor on Dell laptop

Similar Questions

• generic pnp monitor on computer laptop dv6700

  Hi, maybe a stupid question

  Why does my laptop have a generic pnp monitor listed in the Device Manager?

  I've searched high and low to find the driver for the monitor (not the display adapter) just the monitor that is installed on my laptop. but I'm not able to find one anywhere. Why don't I have a listed specific screen and where can I get a

  I very much appreciate all the answers and help about this

  Here for a good time, not a lot of time

  Yes! HP does not have drivers for notebooks...

  most vista drivers work with win 7 as well...

  but I think that I found a driver for infrared to your laptop even for Vista...

  Try this driver:

  FTP://ftp.HP.com/pub/SoftPaq/sp41501-42000/sp41705.exe

  OR

  FTP://ftp.HP.com/pub/SoftPaq/sp42501-43000/sp42722.exe

  Remove all the drivers installed previously to IR

• Satellite L650 - generic PnP monitor normal?

  Hi all...

  look at this photo in my computer, is it normal?
  [http://www.m5zn.com/uploads/2010/12/25/photo/1225102212204kcap6f72cqhwo4cr7f.jpg]

  I think its driver problome. Please help me.
  My laptop is satellite L650 psk1je

  Hey,.

  In the photo you posted, I see nothing of what is unusual, that everything is ok, and why the generic PnP monitor is not ok?

  My screen as a Plug & Play monitor and everything is ok with him.
  In addition there is no special driver for monitor.

  Then n t you worry about this, everything is ok.

• I just bought a new air of IPad.  It came with IOS 9.1 and I can't restore it from the cloud until I have upgrade to 9.2.1 How can I do this since I can't access my settings?

  I just bought a new air of IPad.  It came with IOS 9.1 and I can't restore it from the cloud until I have upgrade to 9.2.1 How can I do this since I can't access my settings until the IPad is set up?

  Set up as a new device, the Update 9.2.1 the restore to original settings and then load the backup.

  (139893)

• Windows does not recognize second monitor, lists as generic pnp monitor

  I have a Setup dual monitor. When I bought the monitor in that I plugged it, windows 7 recognized immediately there were no problem driver. After about two weeks all sudden Windows Add as the right brand and model but just as a generic pnp monitor. I rebooted and the problem was solved. Then it started happening more and more and now I have nothing will fix the problem. I installed the drivers for the monitor, ATI drivers reinstalled and nothing else in between I can find. It wouldn't be a problem except that when it it lists as is the generic monitor does not have the correct resolution and I'm stuck with a second monitor that is horrible with a lower resolution. Any help or ideas would be useful.

  Specifications of the computer:

  Windows 7 Ultimate 64 bit

  Motherboard Asus Maximus II

  Intel Core2 Quad Q9550

  4 GB of Ram

  ATI Radeon HD 4870

  First monitor: Acer AL2216W

  Second monitor: Optiquest Q2162wb

  Hi k.Winger,

  What happened when you tried to remove it in Mode safe?

  I suggest to disable your antivirus and security temporarily software and try remove and reinstall driver.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Access is denied when I try to restore files from the Recycle Bin

  Original title: error

  My husband accidentally sent his files to the trash, Einstein he is. When I click on restore everything, I get a code error that reads "C:\ProgramData\Microsoft\Windows\WER\ReportQueue\report0955479c\is is not accessible. Access is denied. "Help!

  Terristreasures

  Hello

  ·         What is the location of the files that have been deleted?

  ·         Have you logged as administrator?

  ·         You try to restore the Recycle Bin of your husband or your account account?

  ·         You can access the location of the file mentioned in the error? (C:\ProgramData\Microsoft\Windows\WER\ReportQueue)

  To view the location of the file error try to enable hidden files.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-hidden-files

  Follow these methods and check if that helps:

  Method 1:

  I suggest you to manually restore the file from the Recycle Bin and check.

  (a) on the desktop, double-click Recycle Bin.

  (b) to restore a file, right-click and then click on restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-files-from-the-Recycle-Bin

  Method 2:

  Also I suggest that you start in safe mode and check if you can restore files from the Recycle Bin.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode

   

  Method 3:

  If you are not able to access these files try ownership of the folder and check if you can restore the files.

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

• Cannot restore files from the point has up on toshiba vista 32

  I backed up my files on DVD. I did a complete reinstall of the computer. Now when I try to restore files from the backup of the file. It won't allow me. I tried to restore, in ways that shows on my computer. I managed on the base to get the files on my computer, but not the files.
  Help, please

  Hello h20sdavid ·         Are you able to browse the files that are created in the backup? ·         Requires external drive that you are installing the software and/or before pilots to use and you have installed them after reinstalling Vista? ·         What is the error message you get when you try to restore the backup? You can try to change the drive letter for your external hard drive and check if you are able to restore the backup. 1. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. 2. in the Navigation pane, click Disk Management. 3. right click on the partition or drive that you want to change and then click on change drive letter and paths. 4. to change a drive letter, click on edit, click on assign the following drive letter, click the letter you want to use and then click OK. Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• How to use the adapter from the wall with my Mac Pro laptop?

  How to use the adapter from the wall with my Mac Pro laptop?

  The AC wall connector is not compatible with the outlet on the MBP?  As the MBP charger will work from 100v to 240v, a transformer is necessary.  You need a converter that connects to the power outlet home and is compatible with your MBP.  You can buy the Apple travel kit:

  http://www.Apple.com/shop/product/MD837AM/A/Apple-world-travel-adapter-Kit

  Or you can use a single specific converter for the geographical area:

  http://www.Amazon.com/orei-grounded-universal-adapter-Singapore/DP/B004SCSV2U/re f = sr_1_4? ie = UTF8 & qid = 1460735377 & sr = 8-4 & keywords = us + in + uk + power + adapter

  (it is a UK USA example)

  Or you can get the converter that adapts the charger directly:

  http://www.Amazon.com/HIOTECH%C2%AE-extension-charger-connecting-specification/d p/B00MA48JZW/ref = sr_1_3? ie = UTF8 & qid = 1460735486 & sr = 8-3 & keywords = us + in + uk + power + ad aptor + apple + charger + cord

  (again, this is for a UK plug.)

  Ciao.

• Can I make a password reset the flash drive to reset the password on my computer dell laptop?

  OT: reset password

  can I make a password reset the flash drive to reset the password on my computer dell laptop?

  Yes here's how:

  http://www.Dummies.com/how-to/content/how-to-create-a-password-reset-disk-for-Windows-81.html

• I want to enlarge the screen of my ACER aspireone D255E resolution, I don't date my Graphic Media Accelerator but generic PnP monitor limits it's resolution 1024 x 600... What should I do?

  I've updated my Graphics Media Accelerator (which now is Intel GMA 3150), then I adjusted the upper to 1024 x 600 screen resolution, but the monitor displays only a part of the resolution, what do I do? Help please...

  Hi Dave,.

  The description above, you want to increase the resolution of the screen as it is limited to 1024 x 600.

  I suggest you try the steps from the following link on how to get the best display on your monitor.

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-in/Windows7/getting-the-best-display-on-your-monitor

  Post us the results once you try the steps above.

• Restore files from the Windows.old folder

  original title: I want as my files back!

  I had to reinstall my windows vista on my computer and I thought that my files had been erased. I thought about everything, pictures to program files and user settings were gone. BUT I found all in a folder called "Windows.old" and it has everything in it. I want that all these files in return. As in like a restoration.  Is there a way I can do it at all?

  Programs must be reinstall it from the original media: CD, etc.

  http://support.Microsoft.com/kb/932912

  Read the info above re windows.old

  See you soon. Mick Murphy - Microsoft partner

• Non - Generic PNP monitor problems

  So a few months ago, I had a problem with my PC where it would do the sounds of disconnection/reconnection as im Plug and unplug a USB... I had no idea what it was and he finally stopped.

  Now, she came back and found out that the cause is what is called my 'generic Non - PNP monitor' I had my window peripheral upward and the noises at the start I looked and saw that coming in and out of connection and other. I only use 1 monitor and run Windows 7 Home Premium.

  I had first turned off this unit and it stopped for a few minutes then it re-enabled itself and started to act up again. Then I uninstalled the driver, but he quickly reinstalled itself... I ended up re - turn off and unplug that I discovered on my screen plugged into my hard drive internal, but also my Radeon. Since I unplugged I have not heard but I want to know if it was the real problem or I'm just have a chance with her?

  Hi Nathan,

  Thanks for the reply.

  It seems that your computer detects that you have another monitor connected. You have a monitor to fix?

  You can set the second monitor in mirror and then disconnect. That could prevent switching monitors.

  Hope this information helps.

• Generic PnP Monitor driver problems

  I tried to print from my laptop and it won't let me. I think of network problems. The message indicates that the generic pilot pnp can be altered. I tried to solve this problem by trying to find a download or remove and reinstall. No luck. It is not a huge problem, but I like it to be resolved. There is no free site to scan computer and suggest corrections... I'm not going to pay for it. For any help or suggestion would be greatly appreciated.

  SR

  Your printing problem is most likely a driver.  Re-install the printer driver that you

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Upgrade to 3.0 asking does not migrate settings from the previous version

  I have two jobs, I'm running and I have SQL Developer 3.0 upwards a race and has been invited to capture my preferences from my previous installation to the new version. Connections and reports have all migrated to this version. The other workstation, I did the same thing and when I tried to run SQL Developer tried to run first using the sqldeveloperW.exe and it hung and would not do anything and I had to reboot my box to use it more. I was able to run sql developer on this box since then however it does not ask me to migrate my settings from my previous installation. How can I do this?
  
  I tried to extract files in the directory running of deletion, I tried to find the registry settings (impossible to locate any for developer sql pertaining to the management of versions), I downloaded the new version again and extracted. Any help on this would be appreciated!
  
  Thanks, Ron

  You can delete all the SQL Developer\systemXXX folder under the (hidden) of your Windows user profile Application data. This will reset all default settings and ask for the migration.

  Have fun
  K.

• extract data from the generic cursor xy graph

  Hi, I'm new in this Forum.

  In my VI I need to extract the data from the graph xy of one cursor to another, how can I do this?

  I want to extract all the data between the two sliders, to develop.

  Thank you

  In addition to everything said altenbach, you want the slider list: property of the Index. That will tell you where in the table of data, the sliders are.

  The attached VI shows how we can work and also meaningless how it can be with common types of XY data.

  Lynn