IME arrive at some IPS devices at the same time?

Similar Questions

• How to get notifications on both devices at the same time, iphone and watch

  Are we able to get opinions on both devices at the same time?

  Yes, if they are connected using the same Apple-ID
  (1161)

• Use Windows Media Player 12 to "Play To" 2 devices at the same time?

  I'm a big fan of play functionality in Windows Media Player 12 and I am able to play music to 2 devices in my house. I'd like to be able to "play to" both devices at the same time so that the music is synchronized in several rooms. This feature is coming in a future release?

  Hello

  Thank you for your comments.

  I suggest you enter the information in the link below to submit your comments.

  http://mymfe.Microsoft.com/Windows%207/feedback.aspx?formid=195

• Talk to the two devices at the same time.

  Hello

  I wonder that you could help me with my solution.

  I use GPIB to talk to two devices. I need to reset and align a device and control unit B. The process can take up to 2 minutes. Process B is to refresh of the ESA to the required temperature and it can take up to 3 minutes to reach the required temperature. To monitor these processes I use the pull method and:

  • for the process to use the STATp.: COND? query (is this 1?)
  • V use TEMP for the process? query (get the temperature, is the answer within the limits of output?)

  Now, these processes one by one. But, because the two processes must be done every time before HAD tested (as part of an implementation of the test procedure), I would like to take some time to test. Technically, the two processes are independent, I can trigger them almost at the same time and wait when the plu completes itself, and pass them to the part of the tests.

  However, the first attempt to go has failed. When I published the STATp.: COND? query to the breast of the connection to the device has what looks like all GPIB bus is blocked and I cannot issue the TEMP? mark on the device B, as the bus seems to be waiting for the STATp.: COND? command sent to the device has to finish.

  Strange thing is that then I throw the STATp.: COND? order for the first time, the device is not able to accept all other orders.

  Why?

  What is the right approach to this test time saving?

  Asking a statusbyte shouldn't block the system, because it must be managed in the external chip GPIB devices.

  So use the "VISA read STB" instead of * STB via via writing.

  

  This function is located in the VISA palette

• Some profiles running at the same time, others are not

  I have three 'profiles' that I use for firefox (a general, a working one and locked). I can load them with the '-p' option on the command-line very well. If no firefox runs, and then one of them works perfectly. So I think I have the basics working properly.

  However, two of the profiles (work and general) does not work at the same time. But that locked will run with either of the other two. I cannot understand why and I'm looking for some clues on the newspapers to activate or to debug levels to raise or parameters to twist inside (or outside) profiles.

  Specifically, by "does not work", I mean that if 'general' profile firefox is running, so if I start my work profile (i.e., "PEI working firefox"), he has just opened a new window on the current general profile. If I open the locked profile (i.e., "firefox Pei lockdown") which appears fine (starts a separate instance of firefox, with its own plugins and whatnot).

  I had this problem for a long time (many version of Firefox, before even the 3.0, I think). I have this problem on Windows (but WinXP and now Win7).

  I am comfortable with tweaking the settings and looking through the logs, but not sure what to activate. Google searches have not been successful (it seems to be relatively few people using Firefox profiles).

  You can get Firefox to run different profiles simultaneously by adding-no option command line remotely and more of the P-

  For more information, see opening a new instance of your application of Mozilla with a different profile - MozillaZine Knowledge Base

• Pair blackBerry smartphones my BB8330 with multiple devices at the same time?

  matching my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync which is at the same time in my car? If I combine the car, will I need to pair my jaw all over again?

  TeslasBB wrote:
  matching my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync which is at the same time in my car? If I combine the car, will I need to pair my jaw all over again?

  You can only pair one device at a time to your 8330, or any other phone besides.  The "pairs" are saved in the phone, you can use one or the other and you will not have to pair it again.  Once you turn on your bluetooth device and the phone is turned on, they will find each other again.

  Hope this helps,

• Bluetooth connection with two devices at the same time? (on TX)

  I have a Palm TX and am trying to connect to the Palm Bluetooth keyboard wireless AND my cell phone of Nokia (Internet, etc.) at the same time.  The TX works very well with each device individually.  However, when I try to use them together, it won't work.  If I connect the keyboard first, then try to connect to the phone for internet access, it automatically CUTS the keyboard; and vice versa - any order of connection, it will cut the previous when it is connected.  (If the keyboard is connected and I use a fast connection button to go directly to the internet, when he tries to connect it will say that the port/cable is bad and can not connect.)

  (I know generally that a bluetooth device can support up to 7 other devices in its network and I've read where people supposed to logged keyboards and phones to the TX before I bought the keyboard).

  Any help is appreciated!

  fitnessdr wrote:

  Thank you for the information.  So if I had to return the new bluetooth keyboard, should I get the 'Palm 3169WWZ Wireless Keyboard", or y at - it another model I should look for?  (From what I can tell, I think he will use IR)

  Thank you!

  Well, that's the one I use.

  Don't forget to download the driver for the more recent (1.13) for the keyboard in the Palm Support pages for the keyboard:

  http://KB.Palm.com/wps/portal/KB/na/keyboards/palmuniversalwirelesskeyboard/unlocked/downloads/page_en.html

  Do not install the driver provided with the device on the disc - 1.13 is designed for the TX and fixes a bug that existed in the original pilot.

  WyreNut

• Several devices at the same time?

  Creative cloud is usable on 2 computers at the same time?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

• Headphone Jack, not to let the two devices at the same time - work Realtek problem - Dell Audio is unusable

  A copy of my post TomsHardware, where no one was trying to help:

  "To begin with, no thread any where online have solved my problem. My problem in the simplest possible terms:

  -J' bought a Razer right headphone, it does not work when it is connected.

  -J' spent the next 4 hours of downloading, re - download, install, uninstall and reinstall the Realtek drivers, because everybody says I had allow a setting or a related subcontractors as struggling separate devices or something, and I do not have the Realtek HD GUI; at least, I don't think so...

  - Then I discovered that Dell has decided to replace GUI from Realtek with "Dell Audio", which had two options, one of them being that it should even display settings or not.

  -J' took a few steps in Dell Community site and spent the Realtek driver with the Microsoft driver, and that got the headset to work.

  -My headset works fine, but the microphone is not yet detected.

  What I have relevance: right Razer headphones + microphone detachable; Dell Inspiron 15 w / only, audio unified; each unique Realtek and Microsoft audio driver compatible with Windows 8.1.

  What I don't have: the Realtek audio Manager.

  What I wish I had not: Audio from Dell.

  Someone please help me on this, because I have just fired over $100 for it, and I intend to use it for professional players and podcasting; no microphone is not cut it.

  Sorry if I look really angry at the moment, but I think we've all been there...

  Thank you. »

  The main issue: there is a definition of Realtek Audio Dell only exists to ban, I need to change that. I need to configure it to allow two different devices to use in the same decision, and Audio Dell replaced Realtek GUI with its own, which is pretty... Pretty useless. The two parameters, as there, one of them is "Show advanced settings", so congratulations to anyone who decided to do this monstrosity.

  EveryNameWasTaken

  Every post that I found online said that the Realtek HD GUI is the way to go

  Since you can't have the DD Realtek Audio Manager in a Dell, one wonders how they determined it was the answer.

  EveryNameWasTaken

  I just need a way to access

  My question is how to get all these other people. I think that probably they were not talking Dell laptops and their solution applies to some other manufacturers products.

  EveryNameWasTaken

  Please provide another way to separate input devices that are entered into the same outlet

  A headset devices are already separated in the properties. A helmet is an input device, microphone, which can be set as the default device in the properties (Control Panel > sound > recording tab > micro). It is for the internal microphone until an external microphone is connected. The other part of the headset, the headset is governed by sounds > playback > speakers. Who controls the speakers until the headphones or external speakers are connected.

  EveryNameWasTaken

  Inspiron 15 3542

  Thank you. I wanted to know because a couple of the Realtek drivers have a problem with the headphones or the part headphones headphones. Headphones are recognized by their impedance detection and I think that some of the drivers have their settings come down a little, or too narrow. None of the Realtek for the Inspiron 3542 versions are known to be bad for me, but if you get audio in the headphones using the native driver but not as the pass of the Realtek driver then I feel that the fault is with the Realtek driver. You can see all the drivers that comes from Dell for your model in the Inspiron 15 3542 html page. There is audio for Win7, 8.1 and 10 pilots. "WB" means 8.1 and 'WT' 10. I think that there are 2 of each. Try the two for any operating system you have. (If you have10 which, in itself, could be the problem - other people have said they have started the headphone problems when they installed 10) You should not try to install an older version of the driver on a newer version. First remove the newest one in the control panel.

  EveryNameWasTaken

  It befuddles me that Dell would give us a different GUI that has so few options

  I don't know if Dell Realtek & made that choice for technical reasons or something. I think that some of the laptops did not have the Realtek Manager when Dell has started using Realtek as a supplier, but that changed. Of course no one is happy to have fewer options, but yours is the first post, I've seen that reported to the mic. Many other posters have been unhappy, because Dell's Audio Manager does not provide a way to separately control the volume of the headset which is a problem because they can be much too strong, but the real Realtek Manager has an option to display ' phones as a separate device from the speakers.

  EveryNameWasTaken

  I did not buy a $100 laptop, I bought the headphones for $100

  I thought that you had purchased a used laptop. Some of the older 15 Inspiron are probably pretty cheap now.

  EveryNameWasTaken

  -A system restore will not change anything

  I run a retrieval system to remove windows or configuration problems, but that's just me.

  EveryNameWasTaken

  decision does not have a headphone and microphone with any device I checked

  If the plug does not work with any headphone it either because of the Realtek driver fails detecting the defective hardware or it. You should report to technical support if you have an extended warranty.

  EveryNameWasTaken

  "and I used an adapter USB jack to try my usual Microsoft LifeChat headset).

  Is an adapter USB jack of the same thing that the USB input audio in my previous screenshot? A usb plug avoids the problems of the Realtek combo decision-making because the USB does not use Realtek hardware or driver from Realtek. Headset LifeChat know either, but if they are a usb headset while they should work. USB audio devices are as separate sound cards - each device contains its own audio codec, even the small usb Jack. If a device usb audio does not work, it has nothing to do with the hardware, driver or Realtek Manager.

  EveryNameWasTaken

  Another laptop, an HP G62 old without a grip combo under Windows 7 Ultimate, could run them all very well

  You me lost there. The headphones you have tried in the Inspiron have a single plug for a headset jack (4 segments - TAKING), that looks like this?

  

  and you connected to a microphone jack on a laptop with the separate mic Sockets & normal headset?

  EveryNameWasTaken

  each response that I get from either Razer themselves or now these forums was condescending.

  Your two posts today have assumptions that make it difficult to formulate a convincing answer, but I I don't think I'm condescending. I try to avoid the annoyances that we see in so many forums. However, they are your feelings and you have a right to them.

  When I said to forget taking combo, I wasn't brushing off the problem, while recognizing that these mic combo jack issues are difficult, in large part because we can't use the native driver to test the Realtek driver, so we can't easily determine if it is a driver or a hardware problem. It is much simpler to use usb audio, but as I said I don't know what are the special features are required for your purposes of pod casting.

• BlackBerry Smartphones several devices at the same time?

  I bought a really cool together Motorola HT820 wireless earpiece that works like stereo

  helmet and a bluetooth phone.  I just bought another game and can use the headphone jack and the splitter

  to listen my songs from my storm blackberry on the two headsets.  I wish if I could understand how

  for the two atria connected wirelessly in listen-only mode.  I can turn on and synchronize a device, and then turn to

  on the phone, and the other game recognizes and pray okay to connect, but when you say OK, the first device

  takes precidence.  I didn't need to have two sets with two-way communication as in telephone mode, but

  like, my wife and I to be able to listen to wireless.  All hope?

  Thank you

  Andrewm

  While I'm not 100% certain, I believe that most bluetooth devices can accept only one connection at a time, especially with the same type of device.  I know that my laptop can accept multiple connections as long as each unit is separate (although I've never matched two of the devices themselves) but I was never able to get a phone to manage more than one helmet, or more than one laptop at a time.

• NIDAQmx: "multithreading" - reading multiple input channels of the device at the same time (NI USB 9229)

  Hi all

  I use NIDAQmx 9.0.2 (C++, Windows XP) and I need to read data from several channels of an NI 9229 USB card. My request will receive an another application requests to read samples, as in the following example:
  -1: my application is requested to read samples from "Dev/ai0.
  -(1 is not yet completed at this stage) 2: my application is requested to read samples from "Dev/ai2.
  -(1 et 2 ne sont pas terminées à ce stade) 3: my application is requested to read samples from "Dev/ai4.
  -my application is requested at the end 2
  1 and 3 are still running at this stage
  etc...

  I thought I had a thread for each read request, but I understand this post on the forum, this isn't an option (?).

  In addition, the suggestion (in the same post) to use a single task for the acquisition of data from both channels is not sustainable for me, because I do not know beforehand what channels, I'll be forced to read from and at what time.

  Is this kind of behavior can be implemented in NIDAQmx at all? If so, someone has an idea how this could be done?
  Thank you in advance for any input!

  Hello

  The NI USB-9229 has only a single timing engine.  Therefore, you can read each channel independently.  One possible way to implement would be to read the four channels at all times.  Then, when your other application request samples from a given channel, use software to separate the samples you want for this channel.

  Kind regards

• Bluetooth for 2 devices at the same time

  Hi guys,.

  I would buy a health watch to measure my heart rate .

  Do you know if I'll be able to listen to the music with my Bluetooth headset while mesuring my heart rate with bluetooth Watch (simultaneously)?

  (ps: the watch is the link of Mio that measure continuous heart rate via an application.)

  Thanks a lot for your help!

  Can contact Mio link and ask their support team. I did not, but you can certainly connect BT both devices simultaneously. If there is a problem in this case (I doubt it) would be a response by Mio or someone here who has one (less likely). Good luck.

• can you use FaceTime with three devices at the same time.

  I need to be able to have a video conference with three people. A person will demonstrate a product whose other two will check to see that it is OK. Each person is in a different location. I can't find anywhere how to do this. Since it is an event of the time, I won't buy any conference high-end software. We will have a combination of iPhones and iPads.

  N ° but Skype should work.

• two device to listen to music online at the same time

  I have only one subscription, but I can't listen to music online of my two devices at the same time... If I buy the family pass... could do?

  Thank you, Diego

  Hello desorejonaremos,

  Thank you for using communities of Apple Support.

  If I understand your message that you are not able to listen to your music on two different devices at the same time. With an individual membership of Apple's music, you can play music online 1 device at a time. It also allows you to play your music offline for up to 10 devices. If you want to listen to your music online from multiple devices at the same time, a family membership will give you this ability for up to 6 devices.

  This article presents additional information on the operation of Apple's music with a family membership:

  On the Apple music

  With a family membership at Apple music, families of up to six people can enjoy all the benefits of Apple music, each with their own library.

  To use a family membership, you must first set up sharing of family. Then, when you join Apple music, choose a family membership. When your family members join music Apple, they must use the same ID share Apple they used to join the family. After they join Apple music and you connect with Apple ID them, they will automatically be added to your family members.

  You can also change for a family membership when you you affiliate.

  Best regards.

• USBOTG and Charge at the same time on Stream 8

  To keep this thread as productive as possible and efficient for those who find it useful to:

  Unless you have under your eyes

  1. a schematic representation of the 8 Stream USB port (USB port and battery electric circuit etc.)

  2 source code for the firmware BIOS and kernel that controls the material

  Please DO NOT respond or say "is not possible".  In view of the above is true, you do not have enough information to say '' not possible. ''

  If no one replys with a solution, what he calls not possible by default.

  Also please do not answer to say ' I don't know how "or" but I know how to do anything else that ' is also not that useful.

  An update of the BIOS or other software update may be required by HP, Microsoft or both to offer this feature really intuitive and quite possible.

  And I hope that this thread can be an effort consolidated by all who have the 8 flow to make the necessary changes.  The majority of the other tablet PCs are capable of it.  It seems that only the 8 Stream and a few others have trouble with her.

  ~~~~

  I want the ability to use a simple, inexpensive cable and perhaps standard (with electronic active minimum inside) which allows me to host and to use one or more USB devices on the Stream via its USB port B microphone 8 while this cable can also be connected to a charger standard and charge 8 flow simultaneously.  This means that the cable has a minimum of three connectors.  One of the possible configurations are as follows (apart from the normal charging cable):

  1 cable Micro USB B Male - connect to the stream 8

  2 USB male A - connect to the AC charger (IE one that came with the 8 Stream)

  3. USB A female - one or several connectors to plug into the key of USB data, keyboard, mouse or even a hub.

  Connector # 2. above shall provide a power supply to recharge the 8 Stream via conn. #1 and the power supply for external USB devices via conn. #3 so that they are in use - all at the same time.

  A and if the same cable can act as a normal OTG no charger for when no external power supply is available.  This may necessitate a switch or an electrontics active inside.

  The last part of this goal is unimportant for various reasons.  I wish that HP, the manufacturer of 8 flow, to State in writing good mode necessary to do this, so that other manufacturers or even-it yourself can make maximum use of their tablet HP equipment.

  ~~~~

  The neat thing it will alow a person to do with their tablet, it is to work at home using the Tablet as a desktop PC by connecting a keyboard, mouse, perhaps external screen (with USB to the display adapter) and knit for a long time without time limit prescribed by the battery life because the charger provides energy to all involved.

  If there is only a single connector on the cable #3, then an additional node of coarse had to provide support for these multiple USB devices at the same time.  However, it would be better if there were several #3 connectors integrated in the cable itself.  This would be better as a suitable USB hub also requires its own power.  That an adapter is necessary if the whole thing were integrated into one.

  ~~~~

  I really want answers from anyone who has already accomplished USB OTG delivered with simultaneous load with flow 8. (independent of any published 'proper' way is also welcome)

  Today's date is 2015-01-16.  If in 2015-02-16 (one month), nobody has posted a solution and then starts to bug HP and Microsoft on it's us?

  ~~~~

  Technical training:

  I understand the possibility the tablet software and firmware must take a decision on the manner in which power flows on the power port USB microphone B pins.

  I know that with a proper design of the electronic circuit carring these signals of power inside the Tablet could be sensitive to what is connected and without risk to decide for himself what to do without needing to control software.  For example by testing/detecting periodically differential voltage or current management to see what sides of the connector can supply.

  But this is only one of the many "could bes".

  In addition, this can be no standard regarding the standard USB.  What seems to be actually the case with a lot of cables OTG + fresh, is that physical clues embedded in the cable or charger are used to signal to the Tablet what the situation is.  Then the signal of software/firmware of the Tablet, interprets what the situation is intelligently and responds by flipping the bits of correct hardware control to activate, or deactivate the power flow in the port and also control its direction in or out.

  I'm not familiar with the standard USB.  Maybe I could do more research, if I believed that HP followed with 8 Stream or even the standard covered this situation explicitly.

  But to a certain extent, it seems I'll have to invent something that should be intuitively just like it does with other tablets. Isn't it?  Maybe I'm overthinking, but I can't find any USB OTG + cables load that specify compatibility with 8 HP flow.

  In any case, I was familiar with both methods other use of tablets to send the highest mentioned signal to the hardware/firmware/software of the tablet to the idea that it's time to load / time of OTG or both.

  The first method is a 0 Ohm to 200 ohms short between pin USB A 2 and 3.  This is the bidirectional data differential lines D - and D + respectively.  In data mode, all the data passes back and forth on those lines.  When you load with a cable, it's the charger module that puts this short, not on the cable.  I measured the short on three different Chargers.  It is 0 Ohms on two of them, one of those who are the charger that came with the 8 HP flow.  The others 0 ohms was generic.  The third was for an apple iPad and it measured on 53KOhms.  It's probably not the resistance ohms 0-200, but probably it is impedance termination indicating that there is some intelligent serial port communication in the charger itself.  Leave it to Apple to be different.

  This method is somewhat questionable, as this signaling mode would prevent OTG + fee because it seems unlikely that you will be able to OTG when the data lines are shorted each and overloaded with such low impedance.  I could be wrong on this subject...

  The other method I have seen suggested to work with some tablets and phones other than the 8 stream is too short the USB microphone B pin 5 to Terminal 4 with 0 Ohms to 100 000 Ohms.

  USB B has 5 pins.  USB has only 4.  The extra pin on B moves the GND pin 4 pin 5 pin to and makes pin 4 PIN ID.

  If this signal applies to a drop in the ID pin (4) or in some cases, I saw that she proposed, he runs down with 0 Ohms.

  Dead shorting things always makes me nervous.  If ID is a simple normally high impedance high input, resistance could be used to make voltage well below the low or zero threshold while also preventing the risk of damage when cheat on him with a device that you do not have the diagram for.

  Yet, 100K is a bit high for a 'pull down' in most of the situations that I'm used to.  Even a 10K would be uncertain. A 1 K or 2 K seems reliable enough, but then things are weaker and in know more nowadays low...   All but a dead short but if possible.

  So, it seems possible that the device might be able to "indicate" by the specific value of the resistance, which can be found here.  In other words the resistance is not a pull down but in fact a signature analog ID, in which case the exact value will be crucial. So if this is the case, a guess is not going to work.

  Obviously in such a system as described above, a chip inside the Stream 8 should be responsible to support this information. I hope the 8 Stream has such a chip.

  Probably a register inside this chip would be at all times what the State of the pin ID is a binary number.  All that is needed is for the BIOS to the chip and the registry in it and read this number via the bus to determine what happens to the port. Finally, he would use that signals of info to send the order of material to the electrontics of power set the appropriate direction to take etc.  (and change the State of the icon on the screen of the rude)

  I don't know if the PIN ID method described is a standard USB or not either.

  Eventually, there may be a third way. But I do not suspect that it would be possible with a non-active external device. In any case too complicated for the novice DIY for sure.

  The device would need to act is a kind of extension of bus.  As an active hub.  But she would use the negotiation of data USB serial lines and in addition to reproduce one or more additional USB ports, intelligently inform the tablet to get with the program which is "now we're going to otg and recharge at the same time."

  This requires a smart external device with a processor Inside, no doubt.

  It seems to me that many other tablets have been able achieve avecjoint here the need for a smart external device and thus the flow must also be able to do.

  There is a device that claims to be able to work with the HP Jet 7 and 8 and provides same ethernet and USB and big DVI ports so loads the data stream.  But its expensive because it is active.  Se here:

  http://AMZN.com/B00OVDE0GC

  It's called a "Docking Station".

  A reference to a product that does exactly what I want (possibly without active electronic components) is here:

  http://AMZN.com/B00LTHBCNM

  It's by Kirin and it is a device of type squid with four USB ports.  Precisely, which is my goal.  But read in the comments stream 7 user indicated that he would not be OTG and load, not really clear if it worked as a hub USB OTG or not.  Another evaluator stated that she would not support even a single USB device much less fees of 8 Stream.  This device has a switch.

  I forgot to mention that some 'hackers' have claimed success with other tablets to deceive their devices by using a multi-step process to plug things in.  Usually in general they would get connected Tablet and load first, then they would return a switch or something remove some resistance or the signal was introduced by the first position of the switch. For some reason any Tablet would continue to require. Then the data lines would be free and they would plug in a usb key and it mounts correctly even if the tablet was always in charge.

  It's like the power circuit has a lock which does not allow it to return to the mode "power flow" as long as he still feels the power flows inward regardless of what software it is telling.  Full proposal here.

  These tips seem dubious to me.  Changes in the BIOS could change the way it works.  Also you can not be sure what actually happens if you do not have a schematic representation.  You could damage your tablet.  Many people will support icon in the operating system whether the Tablet is in charge.  But I'm sort of a low-risk guy and my policy is generally indicators of intereperet not to have meaning at all once a device is functioning in a non-standard setting.  Especially when it's something that I did not built and could not fix if I FRY.

  Hypothetical reasoning: tell me what data sensory discs really the State of the charging light screen?  This reflect the bit of hardware control programs actually feeding management and status on the port?  Or does it measure the direction of the flow of power, said in the section of the circuit battery monitoring?  Point - none of us have a schema because it's owner. To really be sure according to the smart electronic hardware, the port must be mode flow under advisement "of power. If it's in a "power flow out" mode and power will be delivered externally as well you wind upward with both power supplies the same power at the wheel nets.  In this case, the two opposing regulators attempting both to drive 5 V can have slightly different voltage calibrations.  That could lead to fighting between them, with more than 100% of their capacity.  For example if you try to regulate 4.95 real V and the other and other attempts to regulate 5.05 V.  Current then flows to the tune of 100 mV / a few milliohms in the cables linking the two.  This may be several amperes. (many)  In other words, like I said: you want the tablet to know that power is coming in don't go out and automatically hitting the internal switches needed for that to happen. Probably the icon should indicate this with precision, but in some wacky situation, he could not. There may be a chance that the icon could indicate the load and still be burning or focusing on some circuits of the tablet or the charger.

  Another thing, I could see that happening is if you play with these reported resistance types enough you might find a resistance value that winds up place the device in an intermittent condition.  In other words it keeps flipping back and forth quickly between OTG and fresh.  It can give the illusion that it works.  You can have marginal communication with your USB devices and battery could even load.  But will still be a lot of stress on the power circuit.

  It is difficult for me to risk a Tablet perfectly well if I don't know exactly what I'm doing.

  If a brave individual makes their own experimentation and verifies that it charges and OTGs and you tell the rest of us, you're a hero.

  Maybe one of you has a good knowledge on the USB standard to have more confidence in such an experience... like what the ID pin 4 REALLY supposed to work for example?

  That's what I know so far.  If you think you can help, thanks in advance, or if this helped you, then your quite welcome.

  It works

  http://Accessories.us.Dell.com/SNA/ProductDetail.aspx?c=us & l = to & CS = 19 & SKU = 470-abes & baynote_bnrank = 0 & baynote_irrank = 0 & ~ CK = baynoteSearch & dgc = CJ & cid = 47997 & lid = 4279734 & acd = 10550055-4485850-eb75dcb47e53437680ed323a1f4885fe

  Evidence

  http://targusblog.com/2014/11/25/how-to-turn-a-99-Tablet-into-a-workstation/

  But it's 4 x the price in Europe

  Have fun