restore the system? __

Similar Questions

• Restore the system (win7) after upgrade to Windows 10

  Hello, I would like to restore my system using the restoration of images on my hard drive. I did this several times worked great before. Now, I've updated to 10 and when I try toF8 when the system starts nothing happens. What can I do to restore the system to its default settings?
  I have a R700-1cz. Thnks for your time.

  Posted by niikos
  

  Hello, I would like to restore my system using the restoration of images on my hard drive. I did this several times worked great before. Now, I've updated to 10 and when I try toF8 when the system starts nothing happens. What can I do to restore the system to its default settings?
  I have a R700-1cz. Thnks for your time.

  There is no solution?

• Satellite P300D-136 - how to restore the system?

  Hello

  I own a Toshiba Satellite P300D-136 with Windows 7 (64-bit) and I want to restore the system. I've tried the way by clicking on the value 0 or F8 at startup, but it does not :-(

  The HDDRestore Partition is available...

  Best regards

  Andi

  As far as I know Satellite P300/P300D comes with Vista and not with Win7 for Win7 installation drive recovery HARD work not at all. You can install Vista, maybe, but certainly not Win7.

  Because of this, I assume that you have installed your own version of Win7. Can you confirm this?

  Is that HARD drive recovery facility (F8 > fix my computer) works with the installation of recovery only (out of the box).

• Z220 CMT Workstation: restore the system to factory settings.

  Model: Hp Z220 CMT Workstation
  OS: Windows 7 Professional
  
  I'm trying to restore my computer to factory settings. I pressed ESC several times at the start to the top of the computer. Select the system restore, but the computer just hoot to Windows form. I can not connect to windows, because as some error loading windows.
  
  Is there another way for me to restore the system to factory with a clean Windows 7?

  > is there a way for me to get the recovery disk?

  Two ways:

  1. in Windows system work, running the same version (32-bit? 64-bit?), you can burn a disc of "recovery."

  2. find a friend with a 'detail' in the Windows 7 operating system DVD (remember this is the same 32-bit or 64-bit, your system) and borrow the DVD of him/her, or get him or her to burn a copy of it.

• How to restore the system to Satellite L750-A010?

  What is the possibility of recovery system for extracting device L750-a010?

  You can choose a HARD recovery disk or you can create a recovery disk and could use the floppy disk to restore the system.

  The recovery disk must be created using pre-installed tool called Toshiba Recovery Media Creator.
  HARD drive recovery can be started by pressing the F8 key (by turning on the device)-> fix my computer-> drive HARD recovery

• HP Pavilion dv6 Notebook PC: restore the system and drivers

  Hello. A few days ago I faced a bad experience with my laptop HP Pavilion dv6 Notebook PC. System crashed. At any time, I tried to turn it on, an error message appears and the system was blocked. The message was: FILE: \BOOT\BCD status 0xc000000f, asking for the disc of Windows 7 system running. But the system disk did not run at all. I checked the situation and found the hard drive with 6 partitions instead of 2. I found a named partition BOOT (X which was a replica of C:.)  When I tried to restore the system with the recovery disc, something has obtained control of the recovery disc, so that C: might not be formatted; nor was X:. Also, I tried to cancel the file in X: but disc was protected and does not allow changes. If only I could get my uninstalled hard drive and all partitions have been cleaned. I got my hard drive cleaned perfectly, but my recovery disk can be installed correctly. So, the system has not yet restored. My question is: what should I do to get my laptop with the system restore? any ideas?

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number. Please enter the product/model information in the HP Online Support page for consumers , and/or post it here for our review.

  

  Based on the age on your computer, it could come from the factory with the scores 5 or more. It is common on newer computers that use UEFI and GPT partitions. "Windows 7 system disc", the computer asking wass is a Windows 7 repair disc or a Windows 7 installation disc. None of these discs come with your HP computer and must be downloaded or created in Windows.

   

  Start by using your HP recovery disk set (should be DVD 3 or more). Insert the #1 disc and restart your computer to start the process. Insert the remaining disks as requested, until the recovery is complete.

   

  If this does not work, and you can read the product key 25 character Microsoft Windows 7 on th COST Microsoft attached to your computer, see "How to install Windows 7 without the disc" for download Windows 7 SP1, create the Windows installation DVD and install Windows 7.  If you prefer to install Windows 7 from a USB Flash drive, please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash Drive. After the installation of Windows by using this method, you will have is more HP or software customizations. You'll also need to identify and download the drivers for hardware devices that Windows 7 does not already provide drivers for.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP pavilion g6: how to restore the system using a newly installed hard disk recovery disk

  Hey, everything started when I downloaded the new Windows updates after a long period, after downloading the updates, the blue screen appeared, I restarted my laptop and since then, I get a black screen with error oxcoooooe9. I tried to run a test drive and it came with the 0303 error which means that my hard drive needs to be replaced, so I am a new hard drive and the fixed but now when I am trying to restore the system using the recovery disks that came with the laptop, it says incomplete restoration. Kindly help how do I get my system in working order. Also, I tried all 3 options on the recovery disk, still getting the same message. Help, please.

  Hello @Anky11,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I came across your post about the system recovery and he wanted to help!

  For starters, can you provide me with the product number and the operating system of your laptop?  You can use these links to help you find the product and the operating system:
  How can I find my model number or product number?
  Operating system Windows am I running?

  In the meantime, please consult the following documents, as they can help solve the problem for you:

  HP PC - troubleshooting (Windows 8) HP system recovery problems

  HP computers - resolution of the problems of recovery HP System (Windows 7)

  Please let me know if this information has been helpful by clicking the thumbs up below.
  
  Kind regards!

• After "critical update" 12/23/11, my computer is very slow and crashes, also will restore the system.

  After the "critical" update that is installed on my computer 12/23/11 my computer started running very slowly, he drove my Norton anti virus, blocking, I am unable to restore the system. any ideas?

  Hello

  1 update you installed recently? (Please mention the number of KB)

  2. which version of the Windows operating system is installed on your computer?

  3. what exactly happens when you try to perform the system restore?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Fix Windows system on slow Windows performance issues:

  http://support.Microsoft.com/mats/slow_windows_performance/

  Method 2:

  Start in safe mode and check if the same problem persists. If the problem not persists in safe mode, then turn on the computer in a clean boot state and check if that helps.

  Step 1:

  How to start in SafeMode in Windows 7: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Step 2:

  Put the computer in a clean boot state, and check if that helps.

  How to solve the problem by running the clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 3:

  Check the installation update and try to remove the updates that you installed recently and then try to remove it and check if it helps.

  Remove an update:

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  And also ensure that there are no pending restart, if there are any pending restart, then restart the computer and check if that helps.

  Hope the information is useful.

• Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

  Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

  Cite your version of IE and the full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) during the validation in an IE specific forum or a newsgroup. Please do it in your next reply.

  By "The Internet began" do you mean that you encounter errors Page can not be displayed ?

  Updates have you installed just before this problem started? Have you installed an update of the third-party driver that is offered by Windows Update?

  TIP: Never, EVER to use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or the IE patch & reboot.  If that does not resolve the problem, then try System Restore. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have Microsoft XP 3 package and some how I lost the ability to restore the system. How can I reinstall the system restore on my computer please?

  I have Microsoft XP Package3 and somehow, I lost the ability to restore the computer to an earlier date. How can I reinstall the system on my computer restore it please?

  Thank you.

  Santosh Mathur

  E-mail address is removed from the privacy *.

  Help us understand what "I lost the ability to restore the system" actually mean for you...

  Are you unable to launch/open the system restore?
  Are you unable to create a new Restore Point manually?
  Your system restore calendar is empty dates?
  You preform a restore and get a message that has failed or nothing has changed?

  If the restore in safe mode will not do, keep reading:

  It would be useful to know a few things about your system:

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  What do you see (exactly) that you don't think you should see, and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

• System Restore - question: the computer is not protected. Restart the computer and restoring the system running again. "

  When I run the SYSTEM restore, I get the following message: "the computer is not protected. Restart the computer and restoring the system running again. "I already did and it does not help.  I have Dell Windows XP

  Hello

  Try this link it may be useful you http://www.kellys-korner-xp.com/xp_restore.htm

  Under the heading, enable and disable the system restore... Reg fix?

  Also, it wouldn't hurt to run for malware, spyware, etc...

  Concerning

  GT4U

• restore the system to the original state

  I am running windows xp proffesional 2002 and you want to restore the factory state how to do this

  Some computer manufacturers, including Dell and HP, have a recovery partition on the hard drive of the new computers.  By pressing a special key combination when the computer starts, you can use the recovery partition to restore the computer to the way it was when it was new.

  If this is not available, you can restore the system from a restore CD provided by your computer manufacturer.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• The HD to SSDS: how to restore the system and all the drivers?

  Hello

  I changed the HDD with a SSD. Now I want to restore the system (Windows 8) and all the drivers and applications. To do this I use (with DVD) HP Recovery Manager and I choose to install a clean install of the system, drivers and applications. After the copy of the set in the new hd, when the computer is reset, I get the message that there is no system in my HD!
  Why? What can I do?

  Thank you

  Enter the BIOS
  Go to the tab system set
  Scroll Startup Options
  Go to boot order
  Move the current SSD as the first device by following the instructions in the right pane
  After making changes to the boot order, press F10 and click Yes to save the changes and then exit from BIOS

• Virus protection scans and restoring the system

  I am running Windows XP SP3 on a Dell Inspiron 6000 laptop that was purchased in 2005.
  ---------------------------------------------------------------------------------------
  I had trouble with a browser hijacking, in the form of two executables: b.exe and msa.exe.  I deleted them, cleaned my registry with CCleaner upwards, and now I can use my browser again.

  HOWEVER...

  There seems to be something else that hover on my computer.  I can't run Spybot - S & D, WinPatrol, or the Microsoft Windows malicious software removal tool.

  In the case of Spybot, I initially managed to run a scan, but it failed after less than a minute and now any attempt to reopen the program gives me the error message "Windows cannot access the specified device, file, or path. May not permissions to access you the item. »

  For WinPatrol, I never received the same error message; I can't open the program.

  For the Microsoft Windows Malicious Software Removal Tool, I was able to extract after downloading and running the scan, but it lasted less than 30 seconds before crashing as Spybot.  Now I can't seem to reply to all - no error message or anything.

  I have Norton Internet Security 2009 on my computer.  It can start and analyze, but is not picking anything up.  He has not yet identify b.exe and malicious msa.exe, so there may be something wrong with her as well.

  And Yes, before ask you, I have tried to run the scans in Mode safe mode with networking, nothing helps.  It will just work.

  I also tried restoring the system twice, using two different restore points.  My computer tells me that nothing has changed in the system and therefore don't restore; This of course isn't the case since I obviously wasn't having this problem yesterday.

  Please, please, please help me!

  An infection on your computer, probably a rootkit , look at what you do.  When he sees an attempt to run a program of security such as Spybot, he kills the program and how to change the permissions on executable to prevent you to run the program again.  The rootkit is probably do other nasty things that you can't see, like sending spam or to join a botnet .

  You can run antivirus scanners and removal of rootkit programs available on the Internet and we hope that they can fix it, but the only solution is to reformat the drive and reinstall Windows.  That's what I had to do recently, on a computer owned by one of my clients in consultation, who did exactly what you describe.  Several analyses of virus and rootkit did not help.

  I wish I had a better solution for you.   :-(

• I restored the system to today to recover photos from my camera, I downloaded and the system restore hase not put back them in my photo gallery - why?

  I restored my system to today to get some photos, but the file did not appear - how recover them - I didn't do a back-up

  Hello

  "I restored the system to today."

  What do you mean by that?

  You use the system restore to put the settings of the computer to an earlier Date, doesn't not to hand over to today.

  System restore only "puts away" remove photos.

  It has nothing to do with the data files.

  And if you mean the system recovery to factory (like new) settings, which erases the hard drive clean of everything.

  Regardless of how you spent, try this free program to recover:

  http://www.Piriform.com/Recuva

  See you soon.