Restore Win XP

REF Acer eM250 (no cd drive) bought February 2010.

I reinstalled Win XP partition of the hard drive recovery.

Everything went well, Windows Update will not work, so I can't update. He comes to "check for Updates" but does nothing, no activity of line at all.  I've finally force it to close.

There are many assignments on the web on how to fix, but none of them have worked.

I suspect the Win XP being that a quick review is not compatible with the latest Windows Update.

Any ideas, what are my options here?

Yes, problem solved, everything back to normal, do a lot of updates.

Thank you for any assistance.

Tags: Acer

Similar Questions

  • Issue make install after you restore Win 10

    I'm not sure where I should be as autonomous LR6 I

    I got LR6 installed on a new computer from WIN10, but due to a problem, I had to restore WIn 10 and she erased all the software installed to date

    I went to install LR6 once again, but he said that there was a problem and told me to activate some help which has been abandoned Web site.

    I am able to get help with this or not?

    Kglad thanks for your help.

    Brucgovn thanks for the offer of help

    A number of reasons, I decided to start over from one room and have my C drive to format and reinstall Win 10.

    No is not's suggested method could not have worked for LR6 and CS6 PS I have just a few doubts about the integrity of the system restore, I ran

  • How can I restore Win 7 so I downloaded WIN10 more than 30 days ago

    While I was away WIN10 has been installed. I want to restore WIN7, but the installation of 10 was more than 30 days ago

    The clean install came already posted in this thread.

    Say thanks to 3 days of KenMorley to figure out and a few minutes from CT to repost it as its own here,

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

    It too just in case you're stuck in an update loop, to research

    You need to scroll down to the poster of Joel SC is the last answer on this thread.
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

  • Restore Win 7 with media non-Lenovo - possible to restore the features of Lenovo?

    Rcently a T400 company retired, he converted for home use. Update the operating system on a new SSD became quite the chore, because Lenovo stingy installation communications policy. After playing for several hours, I decided to tighten the teeth, no - recovery media Lenovo Win7 old, use, created for a home system crash earlier. The drive contains over all partitions of Lenovo. public services.

    QUESTION: Is it possible / practice to recreate the structure of the car, feature? Is there a compelling reason to do so?

    diver858 wrote:

    QUESTION: Is it possible / practice to recreate the structure of the car, feature? Is there a compelling reason to do so?

    IMO there is no reason to re-create the recovery partition, if you have a recovery media. Just install ThinkVantage System Update and let him find relevant T400 drivers and utilities. You will probably want to install all the drivers, then decide individual utilities.

  • I can't open any programs on Firefox I installed on my other computer after restoring the computer.

    I've been a Firefox user for as long as I remember and don't remember having these problems until I insttaled 34.0.5 I mainly used Google as my search engine and sometimes of yahoo.

    Whenever I try to open say yahoo or google to install as well as many other sites of the first ir goes to the speed of google search yahoo search as I put it as my search engine. I don't like the fact that I have no choice I want to default search engine. Can't I noticed that all means to eliminate all other Vosteron, it's the first probelem.

    I search for yahoo.com, so I can install it on the computer and get this error message or warning with a yellow box at the top left with a crossing guard fig. He said: this connection is Untrusted. I get it again and again and again, on any other site I tried opening in the past three days.

    I don't know what to do, I have tried everything: config and reset the SSL 2-to-1. I still get the connection it is Untrusted. Even tried to add an exception, but it still gives me this annoying message. At this point, I don't know that I have some kind of malware, or what. But I did not put many programs back on the meaning of the computer I restored Win 7 on a new hard drive.

    I hope you can help me get this fixed annoying problem once and for all. In the contrary case, it Safary.

    Restore the Firefox default state

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information. Consider using it before going through a long troubleshooting process.

  • Satellite L655-1DV - lost partition after the fresh install of Win 7

    Hello

    I have a Toshiba Satellite L 655 - 1DV and yesterday I installed windows 7-32 bit and all the drivers (clear).
    My problem is that after installing my partition (the one with the gbs much) was not recognized in windows.

    Management of the computer, it says I have 450 GB
    https://DL.dropboxusercontent.com/u/100247419/6655554.jpg

    but I have only 31 GB
    https://DL.dropboxusercontent.com/u/100247419/ttttt.jpg.

    How can I solve this problem?
    Thank you in advance.

    Hello

    How did you install Windows 7 on HARD drive?
    Format you the HARD disk during the installation process?

    Disk Management displays only a single partition. Which is really strange because even if the HARD disk should be formatted, you should get at least two partitions (a small partition for restore Win 7 files) and a larger system partition C

    I think you should try to change the size of partitions in disk management C.
    Right click on the partition and decrease the size of the partition. Then you could create a new partition and could mark it is active.

    It would be very interesting to know how the partition is displayed in Windows Explorer.

  • HP 7 (5701ng) steam: questions and win 10 flow 7

    Dear HP Windows 10 gurus,

    I upgrade my HP Jet 7 (5701ng) Tablet to Windows 10 twice now, but I'm having a few problems that I hope experts can help with.

    1. The F11 on Start method of the BIOS to perform a factory reset is not available more after the upgrade to Windows 10. It is really important that Stream 7 users have the ability to easily perform a reset factory must take place 'the worst'. I recently had time to big problems after installing a 3rd party on my 7 Stream antivirus product and although I could have run his own routine through Windows uninstal, I would have liked an option with restore instead, as it can then be no doubt on bits left out etc.. What HP wil do about it?
    2. My tablet is (depending on your suport tech Department) intended for the German market. When I bought here in the Ukas a factory Refurb, the device came with a Euro to UK adapter attached to the charger Euro area - an acceptable solution. I recently got the support of HP recovery on USB by HP and the tech support person said it's a tablet of the German market, the content of USB support will be for the German product, but will have an option of English language. Indeed this is the case, but even if I chose English as the language at the beginning of the restore process, there are still many places where German dialog was displayed and I don't want that. In view of my camera has been renovated plant for sale on the British market, is there a chance the English British recovery menia will work instead?
    3. As a result of the foregoing, it is very painful to have to restore Win 8.1 update, before upgrading Windows 10 - and of course the free upgrade is only enjoy unti 1 year after Win 10 is out There will be recovery of 10 Windows media to Stream 7 available and there will be a way I can replace the memory stick cntents with it when it becomes available (to win on the detachment of the memory sticks etc.).
    4. The 7 flow does not come with the GPS, but I would use Microsoft on Windows 10 cards. What is the recommended HPs Connect USB Dongle GPS to add this feature to the jet 7. I would have bought a refurb flow 8 but theyjust don't seem to be available here in the United Kingdom (at least not at similar/only slightly more expensive prices for what I paid for my Stream7).
    5. I often have problems to get the battery percentage to get just by tapping the icon in the system tray battery - maybe it's a problem of Windows 10. Can he be looked at and resolved please.
    6. I would like to be able to load the stream 7 at the same time as use an accessory USB however a ' on the go ' cable (OTG). Is there a way that this can be done for HP to know?  I saw claiming for OTG cables feed as well, but such a device would work with the 7 flow? The reason why I want it is because the battery runs out very quickly under certain circumstances.
    7. The version of Windows Media Player on my Stream 7 will maximize not out to a full window (by clicking the button maximizes next to close Red Cross has no effect). In addition it will let me play my MP3 files or my WTV files I had previously recorded on my PC Windows 7 Home Premium Desktop - even if Windows 7 PC version of Windows Media Player should allow the reading of WTV files. I realize that Windows Media Center is not included in Windows 10 but it is important that Windows Media Player which is fully functioning and these two problems are a real problem for me. "The power within HP" talk please with Microsoft for a solution on this one. I realize that Windows Media Player not copng with WTV files can be associated with the absence of Windows Media Center, but I don't see why the relevant CODECs can be installed in Windows Media Player for this feature to work. Any help in doing this would be much appreciated.

    That's all I can think of for now. It's time for my sleep of beauty here in England but I'll check here once again in the morning ;-)

    Photoray002 wrote:

    Find interesting.

    If you do, come back and let me know how it works Flying Kiwi.

    Thank you.

    This morning, I received the hub surrounded by bubblewrap in a blink of an eye bag and I tested it out (actually I am writing this reply using my Microsoft Wireless Desktop 3000 keyboard and mouse with the USB dongle connected by the hub as well as the original HP charger and lead). Cyrex experience, isn't that everything works perfectly as advertised for me also. The hub, switch is in position 2 (as has happened) is the position designated for this model of Tablet. Earlier, I was playing files WTV through Windows Media Player to a USB memory stick connected via the hub and which also worked perfectly and the battery charged throughout the.
    After my a few hours of testing today I can say deep I think we have a cheap and effective and compatible with this product solution!
    With respect to the other items on my list, I'm little bit to find solutions to those as well (although I was not happy to have to install a 3rd party product called GPSDirect in order to get my Bluetooth GPS receiver works with Windows 10 cards). I am convinced that this should be responsible for setting as they were responsible for 'break' this compatibility in OS latest due to the location/sensor API revised Microsofts.
    Once I get my new memory stick I will try the new installation of the OS from scratch using an ISO and pilots provided good HP that this will create not a Windows 10 sharing recovery that can be activated at the start with F11 (at least I don't think it will be), as well as from my factory equipped HP USB Windows 8.1 media restoration Bing standby if the disaster occurs I think that this should be a satisfactory solution to this problem. Overall, things are much better, and this forum has been a great help!

  • Without very slow thread, z710, win 8 and 8.1

    Hello

    I get a connection between 1 and 144Mbs on a new IdeaPad Z710 (Intel N7260). Can download webpages 'bursts', but far too slow, for example that of Skype. The router is Netgear R6300.

    These are already tried:

    • Reinstall the driver: no change.
    • Default factory restore (win 8): temporary relief, bad connection after a few days.
    • Connect with a USB-wireless (Netgear WNDA3100): no change.
    • Wired: OK.
    • Boot with Ubuntu 12: can't find wireless

    Try following this threadand see if it helps with your speed problem. The Z510 in that thread also uses the Intel 7260N.

  • Use 'restore factory of Rescue and Recovery' to upgrade 32-bit to 64-bit windows 7

    I have 6 GB of ram on my Lenovo SL410. It runs win 7 32-bit.
    Windows shows that it is capable of 64-bit.
    Can I use "restore factory Rescue and Recovery" to perform the installation of win 7 64 bit?

    Thank you

    Your recovery DVDs are listed here:

    http://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-SL-series-laptops/ThinkPad-SL...

    I guess if your recovery partition factory is win 7, 32 bit, it will restore win 7, 32 bit.

    You can order the win7 64 bit DVD for about $50 US recovery.

  • ProBook 4530 s: win 10 results ProBook s 4530 in no Wi - Fi

    Good afternoon, all!

    I tried to upgrade a ProBook s 4530 on Windows 10.  Everything looks good, until I try to connect to Wi - Fi.  The widget simply says 'Impossible to connect wireless' and there is no showing why Event Viewer entry.

    The wired adapter works fine.  They both have the Realtek card.  I tried the driver Windows 8.1 without success.  The hard switch is activated and the LED is white.  The BIOS is the latest & greatest.  Also triple-checked the router password without the THST wire - OK, too!

    Without indication of the BONE as to what is happening, I may restore Win 7 and either start again or give up.  I have an other s I tried to level; the without wire was fine, but there was something in the services that refresh the office and break the RDP and VPN connections.  So I'm a little worried that these laptops are not always stretch to win 10.

    Tips to win 10 to run on this?

    Thanks for all the research!

    Gregg

    Hello:

    If your laptop is RTL8188CE wireless card, it does not work on W10.

    I didn't even know that there was a W8.1 driver for him.  I thought that this card made up to a maximum of W8.

    Why upgrade to the Intel card wlan card does not appear in the maintenance manual... Chapter 3, page 25.

    That should work well on W10.  Not only that, but then you get a dual band with bluetooth card.

    Intel Centrino® Advanced-N 6230 HP Part # 636672-001

    The only caution is you must get this card, and it must have the HP part # on it or it will not work because of the white list of BIOS HP has on these models.

    You should be able to find opportunity but in State tested and functional at a great price on eBay by questioning by the part number.

    I'll make sure that you see the HP part number indicated for the item in the picture list.

  • Acer Aspire es1 512 - Win 8.1 bing Win10 failed to upgrade now the code error 0xc000000f

    Hi all.
    Acer Aspire es1 512 about 8 months old... unfortunately was running that bloody Win 8.1 with Bing oem

    Started slower and slower start for no apparent reason... (+ 10 mins to start)

    Tried restoring win 8.1,repairreset palarvour and he just constantly stuck on auto repair, do nothing.

    Tried to upgrade to win 10 (the one where I'd install clean drive)... got so far and then projected black.

    Now when it boots up, I get the screen where it says that the image below

    Ok

    Just a quick update, so I'm not leaving this hanging.

    Scan found 100, in thousands of errors.

    During the next startup the laptop told me that there is no bootable operating system.

    The hard drive was dead as a dodo so he sent to Acer via UPS.

    They said that the hard drive was indeed defective and replaced the hard drive and sent it to me

    within 5 days under the 1 year warranty.

    Turn on the computer laptop and relocation of the stuff, I was immediately greeted with a "this laptop.

    can be upgraded to windows 10 '' unfortunately I don't think I'll try that again :-)

    Many thanks Acer for the fast turnaround and Ultra thanks for Ace Ironfly for taking the time

    to try to help out me.

  • System Restore changes the previous windows password?

    Original title: System password restoration & Win

    The system restore affects windows password?

    Hi jack92,

    We do not believe, because we can undo system restore if you have forgotten the password and you can create a new password if you have not set a password.

    For your reference:
    1. see Undo system restore
    2. see protect your computer with a password

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Win Media Player is missing in my menu start thru 'operator error '...

    How can I restore Win Media Player back in my list of programs under start?  I inadvertently deleted (apparently) when you try to create a desktop icon and I had rather not to use the restore function.  Now, the only way I can access is to play my music library, so I don't know WMP is there, but it is not "visible".  HELP, please...

    Thank you much for the help.  The only thing not completed would add WmPlayer list under programs in the start menu, but I can live with that.

  • Windows 7 backup does not work after upgrade Windows 10 and Windows 7 restore

    I am on Windows 7 (Win-7) for several years and I'm quite happy for Win - 7.

    Microsoft has improved my Win 7 to Win - 10 at night. I refused the upgrade and Microsoft restored Win 7 on my computer. Win - 7 works very well except the backup.

    The backup is not one that I used previously.

    PIC - 1 appears when I backup implementation.

    PIC - 2 appears when I press Next

    PIC - 3 appears when I press Save

    How to restore the backup of Win - 7?

    PIC-1

    PIC-2

    PIC-3

    You have not answered my previous message.

    Please provide more information for your issue to be diagnosed.

    Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

    Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

    Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

    To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

    Please download and share with everyone a new copy of your log applications of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

    To access the Application log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window expand Windows logs and select Application. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

    For assistance OneDrive see paragraph 9.3:

    http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  • Returning to Win 7 using the settings menu

    I have an old machine with 10 Windows installed that I want to convert to Windows 7, so I can run some software open source (Hadoop etc) and use it as a training machine.  I have MS Win 7 Ultimate license - but I don't see otherwise than to use the option "recovery" as described in a post on the MS community.  It's a little scary - if you go to settings > Update & security > Recovery > reset this PC > Get Started, then it asks if you want everything clear, or, keep personal files.

    It does not say right here that it will restore the original operating system which I believe has Win 7 (but may even have been something before - I don't remember).  I ran thinking maybe I would see a choice of OS to come back, but it starts just the treatment as he was going to erase everything.

    Question is: what happens to that > starting point.  You will get some choice of OS to come back until your existing operating system image is deleted?

    We spent the 30 days grace period?

    If so the old windows folder has been deleted if it does not restore win - 7.

    You will need to clean install if you did not bother to create a system image on a hard drive completely separated before the upgrade.

    It is expected by M$, we must now jump through hoops to clean install.

    http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

    If looking for updates to hang on a current installation,

    Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.

    4.5.2 is more consistent to have installed,

    https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642

    Switch your windows update setting to never check the updates temporarily

    Restart the machine

    You can try and install the latest client update manually let your update settings to never check for updates until you install it.

    https://support.Microsoft.com/en-us/KB/3138612

    Then you download this from your download folder run from there.

    https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

    Download the x 86 for 32-bit or x 64 for 64-bit

    Install it and restart when prompted too after he did a search of stand-alone for updates that should not

    take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check

    updates before running from the downloads folder.

    Once it installs and restarts

    You can reset your updates affecting everything you had before default =...

    Then check the updates manually.

    I think that the solution came from Softpedia and Joel_CS posted on this thread,

    http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

    You must scroll down for Joel SC post threads, it is the last answer on this page,

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

Maybe you are looking for

  • at startup, use firefox as your browser

    I have an old version of Safari and the latest Firefox browser for my Mac OS 10.6.8I put the Version of Safari 5.1.10 (6534.59.10) to use Firefox as my default browser 37.0.2. Apple can't stand OS 10.6.8 with latest Safari browser. I have set Firefox

  • How will I know if I have the correct version of Firefox on my laptop Windows 8?

    I usually just click on the button "Update Firefox", but now, I wonder if the "beta" version is what I use.

  • While/loop and reset the value i in time loop

    Hello! I have a question about the use of while/loop for. I read the data of 5 devices. Starting with the 0 position when I = 0, I read the data at position 0. And when I click on NextPosition, then I = 1 and stop when I = 5. But in the meantime, if

  • opperating system

    I wanted to discover an old operating system. I went into Control Panel and click systems and printed the analytical system He said it was running Windows 5.1 Service pack 3. But when I click on all programs and go to systems and they say it runs Win

  • The proxy server is not responding

    I have Windows 7 and IE 10.  I get this message every time I try to connect to the Internet: the proxy server is not responding.  It is not the modem because I can connect with other wireless devices.  When I try to fix it, I get the message: windows