Satellite L655-1DV - lost partition after the fresh install of Win 7

Similar Questions

• Satellite U840-10: cannot configure Intel IRST after the fresh install of Win 7

  Hello

  I formatted my U840 - 10 M and did not touch in any partition in addition to C:\.

  However, after all drivers installed, I'm still not able to open fast storage software from intel to set up, because just after installing, it does not appear in the programs or any other place.

  I think raid installation is not activate more duo in the format.

  How can I setup again my raid (or intel rapid storage)?

  Thank you

  Hello

  The [driver Intel Rapid Storage Technology | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 7520 & selSh ortMod = null & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 4 & ID = 83170 & OSI D = 30 & driverLanguage = 42] so the [Software Intel Rapid Start Technology | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries =] [198 & selProduct = 7520 & selSh ortMod = null & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 4 & ID = 83169 & OSI D = 30 & driverLanguage = 42] can be downloaded from the Toshiba UE driver page.

  But I m interesting how you installed Windows 7?
  Have you activated the AHCI mode in the BIOS and you added the [disk RAID | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 7520 & selSh ortMod = null & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 4 & ID = 84223 & OSI D = 30 & driverLanguage = 42] while the Windows 7 Installer?

• Satellite A210 - 127 (PSAELE) cut off and BSOD after the fresh install of Win 7

  Hello Toshiba Support Forums.

  I installed Windows 7 Ultimate x32bit 2 weeks ago and I have problems around him.
  The only driver I have intalled was ATI video card driver and touchpad driver to make it work.

  The problem is sometimes the laptop shutsdown itself and after I turn it back on it says blue screen and some other information you need, but I closed it.

  Also im gamer and sometimes when I play the game it shutsdown again. When I use Google Chrome or Firefox, the browser hangs and makes the pc of the room with her for at least 10 min. it is really bad and I also want to set.

  Also, I want to ask about memory card reader because I insert a card in the reader, but it does not work I think I need a driver for it but is not in the drivers Toshiba Web page.

  Thank you very much!
  If you need any other information that I will deliver to you order for ifx these annoying problems!

  > The only driver I have intalled was ATI video card driver and touchpad driver to make it work.

  Where did you find this ATi driver?
  It could be possible that the installation of this driver ATi the BSOD.

  My girlfriend has the same laptop Satellite A210 with an ATI Mobility Radeon HD 2400 graphics card. The driver version is 8.632.1.2000 and the laptop is preinstalled with Win 7

  It works perfectly without any BSOD.

  By the way: the cardreder works too... you could take a Vista driver or the driver put the A300 series too

• Satellite C660 - Missing WiFi after the fresh install of Win 7

  Hey dear community,

  Ive had the following problem.

  I got Windows 8 on my laptop a few days then noticed that it's the biggest disappointment of the Millennium, and I did not have my original CD Windows 7 more so I downloaded the ISO of [here | http://www.chip.de/downloads/Windows-7-Home-Premium-64-Bit_46355794.html] and formatted with ISO.

  Then I realized that theres no card on the laptop more.

  Then all Lan and wireless Lan indicator found on the Toshiba page for my laptop has me only the connection to the local network.

  Conclusion: The LAN connection that I have now collapsed.
  A Wi - Fi connection is not displayed with the adapters in Device Manager.
  In Device Manager there is a network controller (if this is right), but the laptop can not find a driver in the driver update and it is not active.

  I hope you can help me, I'll be back without problems via WiFi to Internet.

  SRY for my bad English Im student have in grade 10: smileyvery-happy:

  Greeting
  TazzyTV

  Edit: Have a Toshiba Satellite C660 - 2nk PSC1QE

  The Satellite C660 - 2nk PSC1QE-04H002GR was equipped with Atheros AR9285 Wlan / BT combo card.
  To get (both WLan and BT devices) working this machine, you must install the driver Atheros Wlan, filter for driver Atheros BT package and Toshiba BT stack

• Satellite L755D-S5204 dead after the fresh install of Win XP

  Regarding this Toshiba lab Top I bought the last weak.
  Model: Satellite * L755D-S5204 *, I had to install a new system (Windows XP 32-bit SP3)

  But there is a major problem; who is that definitions of drivers that DVD was not included with the lab on it and my Lab Top is currently dead.

  I'd be grateful if you provide me with a download link for the drivers DvD definitions.

  Can you please be more specific?
  What you're looking for?
  Do you need drivers Win XP or what?

  The Satellite L755D-S5204 seems WE notebook series and Win XP drivers are not available for this new series.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• Recovery work after the fresh install of Win 7?

  My toshiba provided with Win7 Home Premium.
  I had a win7 pro geuine copy work and if I sintall on the C partition I'll lose the boot partitions for recovery-related sector?
  Which means that I would not be able to go back to win7 HP as a factory reset?

  Is it possible to recreate the previous boot sector?

  Thank you

  Hello

  > I got a win7 pro geuine copy work and if I sintall on the C partition I'll lose the boot partitions for recovery-related sector?

  Unfortunately, Yes.

  The new Win 7 installation would be to remove the early boot manager, which means that you would not be able to choose the option of HARD drive recovery.
  I highly recommend creating a Toshiba Recovery disk before you install or change Win 7

• Envy 17: How to change the graphics unit after the fresh install of Win 7?

  How can I switch between the internal and the discrete graphics unit?

  I installed the drivers recommended from HP website, but I don't have the ability to switch.

  I recognized with dxdiag that the system uses Intel graphics unit only, but I want to use the AMD graphics unit.

  I can't install the CCC of AMD, because she claims that no device is available. So I checked in the Device Manager if the AMD GPU is recognized, and it is not! All the drivers are installed.

  The BIOS is limited and I am not able to change the graphic in the BIOS.

  So I need your help.

  Please give me a solution for this problem.

  Thanks in advance for your support!

  SysInfo:

  Model: HP Envy 17-3080ez (Switzerland)

  REF: A2Q30EA #UUZ

  OS: Windows 7 Ultimate x 64 (clean)

  Fixed a problem. Just reinstalled the whole packs AMD and did a restart. Then install the factory rider once more, and everything works fine!

• Good question after the fresh install of Vista Ultimate

  I just be reformatted my laptop Vista ultimate.

  But now, I found that I lost half of my volume, and when I put my external speakers to stop the song in the media player and I have to start the song so she can play through the speakers.

  If I remove the speaker from taking while playing music no sound comes out of the computer as it should do.

  Help, please.

  Hello

  Have you tried to update a sound driver or upgrade Windows by default?

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Undetected after the fresh install ESXi virtual machines

  Hello

  I have to say I really enjoyed working with ESXi, but I run a quick question for the moment.

  I initially installed ESXi 5 on an SD card and created several virtual machines via vSphere Client Windows. Because of the card SD comes off on the reboot (using a Dell R610), I have now decided to install ESXi 5 on a USB key. However, when I open the Windows of vSphere client, I do not see the virtual machines on the host, but I see that they are always present in the VMFS data store that I created earlier. When I boot from the SD card, they appear very well.

  I have to migrate somehow?

  Thank you very much for your help!

  As this is a new installation of ESXi you can save the VMs from the data store as the inventory.xml on the new facility can be empty.

  Measures to save the virtual machine using vmx are available on Ko http://kb.vmware.com/kb/1006160

• There were add - it and I lost it after the update and I don't remember his name

  There were add - it and I lost it after the update and I don't remember his name
  This is the module to show me the source of any content capable of click
  like the pictures on twitter or Facebook
  also videos on youtube
  and he showed a small icons with form of small pic on it with different colors
  and also sometimes in the form of small lock on it

  now I need to know what this add - on the name or how to get it back

  It seems that this extension:

  • https://addons.Mozilla.org/en-us/Firefox/addon/redirectbypasser/

  

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• Can I delete my recovery for WIN7 partition after the upgrade

  Can I delete my recovery for WIN7 partition after the upgrade.

  What can I INSTALL CLEAN so I want

  What should I do when I need to reinstall Windows 10?

  The upgrade is a download of ISO or just installed on WIN7?

  The application upgrade says to reserve my copy so I did but I never got confirmation of this email?

  July 29, 2015.

  How to get the Windows 10 free upgrade

  J W Stuart: http://www.pagestart.com

• After a fresh install with XP Home EWdition, Service pack 1, 2.0, and 3.0, I can't install Windows Update or IE8.

  After a fresh install with XP Home EWdition, Service pack 1, 2.0, and 3.0, I can't install Windows Update or IE8. Update back me to http://support.microsoft.com/kb/2497281

  Article ID: 2497281 - last review: January 18, 2011 - revision: 1.0

  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000, or Windows Server 2003 if these versions of Windows are not updated with the latest Service Pack

  But I have service Pack 3.  IE8 fails, install a convenience store, but after following the instructions there is no difference.

  I am at a loss for the next steps...

  There was problems with the server for updates for a few weeks now...

  Many people say that download and run the Update Agent stand-alone file solves this problem:

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

  For more information:

  http://support.Microsoft.com/kb/943144

  For later use, it is not necessary to use all the steps you mentioned. You can upgrade directly from SP1a to SP3.

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.