Restoring to factory default with the propeller? a windows 8...

Similar Questions

• HP Envy h8 1409: just restored to factory default and now windows 8 is not activate! Help, please!

  Recently, my PC started a little all around to have massive problems that I don't mind going into details, but I decided that after 2-3 years to possess, I would restore it factory default. It hurts but it would be a good idea, because I knew that windows are installed on it and apparently, this model is supposed to just reinstall without any problem...

  I have no idea what the hell happened, but now he has not activated windows. I know that the product key, and when I get it, it says "your product keys works! Continue when you're ready', then when he starts to deal with it, I get the error "the following error occurred while trying to use the product key:

  Code:

  0xC004F01F

  Description:

  The software licensing service determined that the license is not valid. »

  So seriously, what the hell am I supposed to do? Please help me

  Hello

  If the original HP recovery partition is intact then you should be able to create the recovery media.

  Before attempting to improve once again, use a hard drive of commerical known reliable product imaging in the image of your hard drive to external media.  This will save you a lot of time and effort, if you never experience questions requiring to return to a fresh factory restore and then have to go through the whole update process again. The image will also save you if your hard drive fails.  If the HP recovery media is the plain W8 then take the shot.  Then after all the updates are applied and your with set success to date to W8.1 and then take another picture.

  Thanks for posting on the forum.

• With the help of Windows to the top. -J' changed my settings on the page to backup several times, and now when I try to back up my computer it keeps default.

  TODAY, I CHANGED MY SETTINGS ON THE BACKUP OF THE PAGE WITH THE HELP OF WINDOWS BACK UP TO SEVERAL TIMES AND NOW WHEN I TRY TO BACK UP MY COMPUTER AGAIN, HE GUARD DEFAULT.
  I HAVE WINDOWS VISTA PREMIUM 64 BIT.
  I WOULD APPRECIATE YOUR RESPONSE

  Hello

  1. do you receive any error messages?
  2. what exactly happens when you try to backup data?
  3 have. what settings you changed?

  Please answer these questions. This will help us assist you better.

  Try to perform the clean boot.

  Refer; http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• If I used a creative combination on an old computer, then installed in my new computer but had to do a factory reset on computer; I could still install Creative suit on the same computer even after factory reset with the CD?

  If I used a creative combination on an old computer, then installed in my new computer but had to do a factory reset on computer; I could still install Creative suit on the same computer even after factory reset with the CD?

  Yes, you should be able to reinstall, but if you can you should disable before resetting the machine.  Otherwise, if the two license activations were used and no reset you will need to contact Adobe Support by chat and ask them to reset your activations.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Firefox worked, today has not started with the error the version of this file is not compatible with the version of windows you are using.

  Computer is Windows 7 Ultimate 64 bit. Firefox has work fine for over a year on this computer. Nothing has been changed or updated updated except Windows update indicates that it installed updates on August 19. I had computer week before because only out of town, back entrance and began August 18, but Firefox has worked that day. Does not use FF again until today. Today August 22, firefox does not start, shortcut icon changed program not there. Exe in the folder when you click Poster error message says the version of this file is not compatible with the version of Windows, I am running. Exe of Firefox shows created on 20 August. I suspect the update, Windows or FF but lean towards windows, which was spent, who broke things. I noticed that IE 10 updates, updates of .NET framework and the malicious software removal tool have been installed. I tried to restart the computer, has not set. Tried to run as administrator, did not work. I don't want to uninstall FF, at least have to because of all the things I have here, bookmarks, last past passwords, etc..

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files (not the profile folder, where the bookmarks are stored) and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• When Firefox, click on the desktop icon to a new window, all existing windows update first with the new FF window on top; How to keep the other minimized windows?

  Older FF Windows are covered with newer FF with the new FF window on top.
  It wastes time & space monitor.
  It is likely that a simple adjustment somewhere...

  This has happened

  Each time Firefox opened

  Is with version 3.6.6.

  This can be caused by a problem with an extension (Tools > Modules > Extensions)

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• is not compatible with the version of windows you are using, with X 86 or X 64

  My son downloaded something and now I can't use anything on my computer, I get "not compatible with the version of windows that you are using, with the X 86 or X 64... I uninstalled it but it will not go away, I tried to do a system restore, but I get the same error... ideas?

  What antivirus you typed the problem started?

  It seems fishy to me, it could be a virus that has been downloaded at a given time, perhaps even until this program was installed. I would try an online virus scanner.

  Try this: http://windows.microsoft.com/en-US/windows-vista/how-do-i-remove-a-computer-virus
  And: http://quickscan.bitdefender.com/en/ (from what I hear, it removes something fishy, so be careful!)
  But also: http://housecall.trendmicro.com/
  It should work with IE (Internet Explorer).
  Curiously, the ones I tried before I could not find, so I did a quick search and these look good.
  I forgot to ask sooner, but you can open command prompt (start > Accessories > try click right-click on command prompt, and then run as administrator)?
  I hope this helps!
  PS What version of Internet Explorer you have?

• try to download the audio book gives the error "the version of this file is not compatible with the version of windows your race."

  frustrated, the overdrive software download player!

  I tried everything I can think of to download this audio book. whenever I try, I get a message error that says "the version of this file is not compatible with the version of windows your race. check the system and see if I need a 32 or 64-bit and contact the software publisher. "or something like that. I downloaded the overdrive media console software, but every time that I try to download an audiobook, it gives this message. I tried to change the settings with the "use an older program with this version of windows' software overdrive console in Control Panel with no luck. Anyone have any suggestions. I need help please!

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• When installing CD collection national geographic Gets the error, "the version of this file is not compatible with the version of Windows that you are using".

  Original title: the version of this file is not compatible with the version of Windows you are using. Check your computer system information to see if you need a X 86 (32-bit) or X 64 (64-bit) version of the program, and then contact the software publisher.

  I have a large CD collection published by National Geographic. The difficulty lies in the installation of the program that displays the pages. Setup of the program ends. ins.  These Photo CD were produced by mindscape. When you try to contact them, they are based in France, and it is impossible to get support for this product. Is it possible to get the installer on the CD to do its job to provide a way to turn the 'pages '?

  Hello malaglinskom,

  In addition to what Azam offered, you may try the following:

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Hope this information helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• IRQL not less equal or (bsod) after doing some tinkering with the registry of Windows Media Player files.

  Original title: IRQL NOT or LESS EQUAL (BSOD) help

  Hello

  I've experienced this * IRQL NOT LESS or EQUAL * problem irregularly from January 2. It happened after doing some tinkering with the registry of Windows Media Player files (but I made sure to return to the default options once I'm done and I have also provided a backup copy) since it generates random album art files and I am looking for a way to stop him. I also deleted the files Windows Media Library (wmdb). I don't know if this has nothing to do with the BSOD. This error occurred at random intervals, sometimes after opening my computer laptop it will BSOD sometimes, it won't happen after long operating hours. Hope you can help me with this.

  Is attached a copy of my DMP files which you seem to demand for troubleshooting. Dump

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

• "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program.

  Hello

  I seem to be having problems when you try to install a program on my Windows 7 that allows to launch on my Windows XP and Windows Vista. I used the tool to solve compatibility problems and selected these settings in the CONFIGURATION file, but nothing seems to work the error message I get is as follows:

  "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program, and then contact the software publisher. »

  Is it possible to set my computer to allow this program to run successfully? Any solution would be greatly useful.

  Hello Rdforbe,

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  To find out if your computer is running 32-bit Windows or 64-bit, follow these steps:
  System opened by clicking on the button start , by clicking on the Control Panel, click System.
  Under system, you can view the system type. This will describe if you have 32-bit or 64-bit.

  You can also try compatibility mode.

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• No sticker with the license number Windows XP for Toshiba NB100

  I lost the sticker with the license number Windows XP for Toshiba NB100. I have an invoice.
  How can I recover the license number?

  Licensed refused to support this topic.

  Hello

  You can't get the license number.
  First the sticker on the bottom of the unit has been a serial OEM key. This key cannot be used and would not work under Win XP installed system costs.

  The point is that Toshiba image which was preinstalled on this laptop has already been activated, which means that this key has been useless.

  I assume that you have not created a disk recovery Toshiba (or flash USB stick) in the past? Right?
  These records would be reinstall the image of Toshiba containing the active Win XP system.

  Well, usually it of possible to order this disc [here | http://backupmedia.toshiba.eu/landing.aspx] but I think that would be more because of the age of the laptop.

  Solution: you have to buy Win XP with valid serial key.

• Sticker with the product key Windows under the laptop is unreadable

  Hello Toshiba Help Center

  Please help me solve this problem

  Three years ago, I bought a laptop Toshiba with Windows Vista preinstalled. I also received a DVD with her recovery. I now want to reinstall Windows and completely format the hard drive - however, the sticker with the product key Windows under the laptop is unreadable. So what I did... I formatted my laptop for windows 7 and after a few months, I want to recover my product key and install windows vista pre - with the original product key that sound now
  unreadable...

  Is it possible to get it back by, my laptop series No, or...
  Best regards, TOSHIBA
  IM bluebird.jeff

  Hello, Jeff

  At first, I must say that it is not toshiba Help Center, but user forum created by Toshiba, so if you wait for the response from Toshiba people here you are in the wrong place.
  In any case, in this forum, you can pick up some very useful information and a lot of people here can help you with your problems.

  Return to described the issue.
  Unfortunately you do not understand how it works with the product key and Windows Setup, so I'll try to help you with this.
  Each computer toshiba laptop comes with preinstalled operating system (recovery image) and the product key at the bottom of your laptop belongs to this version. With other words: when you buy the new laptop, you have to pay for hardware, operating system and a license for this preinstalled OS. Product key at the bottom is not a kind of universal product key and cannot be used for activation of another version of Windows.

  You can use the delivered Toshiba recovery disc that contains mage replicated several times and each time you will have activated the operating system. When you use the Microsoft disk for the installation of the OS you must have valid product key which belongs to this particular version.

  In your case product key is for Vista, and you cannot use it for Win7 activation. This product key is... unnecessary.

  If you have any other questions you are welcome.

• Problem with the installation of Windows XP on the Satellite A200-1RK

  Hello!
  I ve you have a problem with my laptop.
  I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
  Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
  Why?
  Can someone help me?

  Maybe I can use drivers from another laptop A200 series, but which?

  Hello
  a good explanation how to install XP on a SATA machine can be found here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29342

  Welcome and good luck

• List of laptops that compatible with the images of windows 8.1 and 10 HP.

  Hello

  I need to find a list of laptop computers that are compatible with the v10 and Windows v8.1. The operating system will be installed from origial HP image.

  Could you please help me to know suh list?

  Kind regards

  Emil

  Hello

  Even if such a list is available, I'm afraid that you do not publicly.

  Most or all out last year 1 HP computers are compatible Windows 10

  Most or all computers HP published between late 2012 and between summer 2015 are compatible in Windows 8

  Class specifications business most released in the past recent years can run Windows 7, 8, 10 and ~ ~ Linux [I mean backward compatibility, compatibility certainly not ahead]

  If you have a specific questions. specific HP models, do not hesitate to post.

  I hope this helps.