Satellite L670 - the system HARD drive recovery does not start

Similar Questions

• Add the new hard drive, windows does not start now

  OK, ill be as specific as possible here

  Ive always had a few hard drives in my computer at all times

  A few days ago, I had problems with my windows 7 install that I tabled to the installation while I had all of my hard drives connected at installation time.

  2 days ago I decided to start over fresh with a windows 7 ultimate 64-bit. I also bought a new 64gig OCZ SSD for my OS.

  I disconnected all my drives except the SSD and performed a complete installation of windows 7 and all a well worked first go again.
  I then started to shut down my computer and adding a hard drive to the times and re starting and in ensuring that the drive letters came back how I got them I had on my previous built and changing them were nessisary.

  I installed my 5 drives in this case and the computer rebooted fine and everything was perfect until!

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4. 320 GB movies
  5. 320 GB games

  I copied all HDD 4. movies (only movies and music files) on disk 3.
  then I removed the hard drive of 4 and replaced by a new hard disk 1.5 TB and restarted the computer
  the computer starts very well and once loaded windows I coppied the movies and music of the new 1.5 TB hard drive back.

  now, I had

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4 movies 1.5 to
  5. 320 GB games

  This is were the problem started. I restarted my computer and it wouldn't start. He gets the message of realteck and just a cursor flashes and remains like that permanently.

  If I remove the sata cable to the back of the hard disc 4 the computer starts fine
  I can plug the cable in just before the windows screen comes up and the hard drive works fine and is FLEURIDAS and all.
  but leave it plugged during the start of what the computer does nothing

  things I've tried, I made sure all my boot priorities are pointing to the SSD drive
  I have turned all devices normal priming and the hard drive with the OS selected
  Ive made sure that all the drive letters are correct on each drive
  Ive tried to get started with the windows 7 CD to get to the repair section and I click Repair tool, start it recconises there is a problem but informs me it can not be fixed automatically and asks me if I want to send the information to microsoft (which me).

  It's really made me this one any help will be great and thanks in advance

  just in case sick leave my system specs

  EVGA X 58 mobo
  INTEL Core i7 940
  6 GB of corsair ram
  all hard drives, you know
  1000 watt power supply
  2 X PALIT GTX 295 but SLI is not currently connected

  Hi AUST_DeVinE,

  ·         Please give us the exact error that you receive when you plug the SATA cable?

  ·         After you connect the hard drive, are you able to boot in safe mode?

  Check if you are able to boot in safe mode. Link: start your computer in safe mode:

        http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  1. run chkdsk on this hard drive, follow the steps below and check, if it helps:

  i. connect the external hard drive

  II. starting the computer in the Windows recovery environment, you can check the link below: What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  III. run Chkdsk,

  Here are the steps to run chkdsk:

  i. in the command prompt window, type the following command and press enter Chkdsk/r X:

  II. Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.

  III. o press when you are prompted to check the drive the next time the system restarts.

  IV. restart the computer.

  Note: When you restart, Windows checks the drive for errors, and then Windows starts.

  Link, please refer to: Chkdsk: http://technet.microsoft.com/en-us/library/cc730714 (WS.10) .aspx 

  2. you can even format the hard drive and check if this can help, see the below link for the same: Formatting disks and drives: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Formatting-disks-and-drives-frequently-asked-questions

  3 make sure you check the firmware updates and the updates of the system BIOS

  For updates and updates the system BIOS, contact the manufacturer of the hardware in the computer, refer to the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us 

  Not even verify that the system BIOS correctly detects the hard disk

  For more information about how to verify that the system BIOS correctly detects the hard disk, contact the manufacturer of the computer hardware.

  BIOS WARNING: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to run the installation on a 5 GB pcmcia hard drive, it does not start?

  I have a computer dell laptop, which has a non-functional drive Bay, so I use a 5 GB kingston pcmcia hard drive. Recognizes the xp home installation cd and copy of files, only I does not start when the system is restarted, is it a boot disk to start just xp? The bios doesn't have the ability to start from pcmcia, only an ehernet PCMCIA.

  Can I create a boot cd which recognises the pcmcia from the Setup disk, or add the driver pcmcia on a boot disk and which record a bootable CD?

  Hello

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Try to solve this problem together.

  If I understand correctly, you are trying to install XP on a PCMCIA drive and the computer does not start after the installation files are copied during installation.

  Since then trying to install XP to a PCMCIA drive and the computer does not start after the installation files are copied during installation. In addition, the BIOS has not an option to boot from PCMCIA readers. So basically, you will not be able to install XP on the PCMCIA drive.

  Regarding the question on a boot disk, Microsoft provides no such discs. You will need to do a search online or in the stores of tech for such a disc, if it is available.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information. Reply with more information if you need further assistance, we will be happy to help you.

• Re: HARD drive recovery does not work

  Dear Toshiba

  my laptop in brick and now I got

  during the restoration that he bricked once again and now it is not a choice of the repair of your computer in the F8 boot more

  How can I start the hard drive recovery now?

  If the option is not available then HARD drive recovery option is screwed to the top.
  You have created recovery DVD Toshiba recommendation?
  If Yes use this disk for the installation of the OS.

• Hard drive error, does not start.

  Computer does not start. I get this failure code:
  Rw1xtw-7ax87b-mfpv6k-619403
  
  Can't find any information on this subject, can someone shed some light on this subject for me?

  Hello

  It decodes for hard drive error 305 or the hard drive has failed, you will need to get the replaced hard drive and reinstall the OS and have a Fresh start, note that all your data is saved on the hard drive will be lost.

• 3000 C100 cloned Hard Drive Upgrade does not start

  Hello

  I recently bought a western digital hard drive 320 MB to replace my hard drive C100, which is now complete.

  I cloned the old hard drive and when I installed the laptop doesn't start, he just said "no bootable CD in the drive. It does not seem to 'see' my new hard drive, when I pressed the button lenovo tools and then used F12 to choose my boot option, the laptop just a black screen.

  Any ideas?

  Derek

  What software did you use to clone?

  WD now provides an OEM to Acronis version on their website

  that I used and it worked.

• Satellite A660 - protection of HARD drive utility does not enable protection

  Hello

  I have a Toshiba Satellite A660 1F6, unfortunately the usefulness of Toshiba HDD protection does not enable protection because all the buttons are gray, and when I try to open it, a message appears: "He was not able to set up properly for the Service of HARD drive Protection System."

  I tried uninstalling and reinstalling, but the situation does not change.

  Thank you.

  Are you using the original operating system preinstalled that you got with your laptop?

• storage system on the external hard drive recovery?

  storage system on the external hard drive recovery?

  When you request support, please provide the name number and produces complete model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  You do not save the HP system on an external hard drive recovery. You must create your recovery media personal HP for recovery works. HP Recovery can be created using DVD + R discs or a 32 GB USB Flash drive. Please see create recovery discs or record a recovery Image on a Flash USB (Windows 8) drive or create recovery discs or record a recovery Image on a Flash drive (Windows 7) for instructions on creaing your HP recovery media.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Recovery does not start on Satellite P200D

  I have a satellite P200D and I need him back due to a virus.

  Now, I ordered the recovery media kit and when I want to start it it does not start. The manual said, put the DVD, restart the computer and press F12 when the massage "In Touch With tomorrow TOSHIBA" poster.

  The message is not shown in the configuration and the recovery does not start.
  When I press F12 at startup is also the recovery does'nt start.

  What I am doing wrong?

  How can I get my laptop back?
  Any ideas?

  Hello

  You must boot from the disc.
  This means that you will need to insert the disc, have to turn on the device, choose ODD as boot device and this will start the recovery process.

  Try this!

• HP ProBook s 4540: How can I tell if my laptop has all the spare HARD drive bay or not?

  How can I tell if my laptop has all the spare HARD drive bay or not? I want to use an SSD, but also my HARD drive as secondary.

  @ShohagDr

  This model has only one.

  Your maintenance and Service Guide here.

  http://www.HP.com/CTG/manual/c03758231.PDF

  Laptop HP ProBook s 4540 - videos to remove/replace

  http://h20464.www2.HP.com/results.htm?SID=5229455&MEID=0B16F6F9-A9BB-4275-8FB4-57CCA3816318

  REO

• Simple Technologies Signature Mini 250 GB external hard drive espresso does not

  Original title: Simple Technologies Signature Mini 250 gb External Hard Drive espresso

  has anyone found a driver or a "Supplemental Software" to make this product work with Windows 7?

  Hi lacrawford,

  Thank you for writing to Microsoft Communities. The problem description, I understand that you are not able to access the external hard drive. Before you start the troubleshooting steps, I need the required information:

  ·         He has already worked?

  ·         What happens when you try to access the external hard drive?

  ·         You get the error message?

  ·         The question is limited to this device?

  Follow these methods.

  Method 1: Run the tool and troubleshooting hardware devices.

  Method 2: Try using the device on another USB port and check.

  Method 3: Try using the device on another computer and check if the problem persists.

  Method 4: Uninstall and reinstall all USB controllers, follow these steps:

  (a) click Start, type Device Manager in the start search box and press enter.

  (b) expand Bus USB controllers.

  (c) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (d) restart the computer and reinstall the USB controllers.

  (e) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  For reference:

  Tips for solving problems of USB devices (Applicable to Windows 7)

  For the latest drivers/software, you should contact the manufacturer for more help and information.

  If please follow the methods and let us know if you need more assistance. We will be happy to help you.

  Thank you.

• Two disks hard two Vista does not start

  Two disks hard two Vista does not start

  For large computing needs, I combined two software Vista, two memoirs, two hard drives, the work display card and sound card.  A hard disk as Primary Master IDE has perfectly my current programs, Office 2007, data and functions.  The SATA drive has the space of files I need and a disabled Vista.  The computer starts with the SATA HD Vista does not work and stops at a missing file.  I do F12 and select the hard disk IDE startup.  I tried several solutions, for example: Startup Repair, recovery disk, installation DVD of Vista, repair, BIOS F2 re boot choice and sequence, does not list the IDE drive as a choice, tried to remove the disabled Vista, all the solutions in the forum, Ms.  Not solved.

  For months in the auto-update feature, the two .NET Framework 1.1 and 3.5 will not install.

  Please tell me solutions to correct these errors for .NET and start-up.

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/314060

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Burn a CD or DVD

  If your computer is equipped with a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. By default, Windows Burns discs in the active file system format, but you can also choose to burn discs in ISO image format.

  See you soon.

  Mick Murphy - Microsoft partner

• drive Windows does not start a cd or dvd. it keep said to incert cd after I insert it

  drive Windows does not start a cd or dvd.  it keep said to incert cd after I insert it.  It can not read the cd or the dvd to start.  I rip, but it tells me to put it on cd.  I made a full recovery but still does not.  I have a Lenovo all-in

  Hi Kenneth,

  1. are you able to read files with another player?

  2 have you made changes to your computer recently?

  3. from when are you facing this problem?

  4. what operating system is installed on the computer?

  I suggest you follow the method and check if it helps.

  Follow the link and check if that helps.

  Your CD or DVD drive cannot read or write media

• 6 Lightroom unbootable after an update... I reinstalled the software, but it still won't start? Updated through the creative cloud but still does not start?  What should do?

  6 Lightroom unbootable after an update... I reinstalled the software, but it still won't start? Updated through the creative cloud but still does not start?  What should do?

  My computer is a PC with Windows 10.
  Everything worked well before the Update Adobe Lightroom 6.
  The software was purchased in a shop (FNAC) with software to download map, it is saved in my account (Adobe) with its serial number. Why is this so difficult thing to reinstall Adobe software?
  

  
  

  I apologize for the inconvenience.

  Since it appears and disappears from the Task Manager, it seems that Lightroom crashes.

  We have seen this kind of problem on Windows 10 when Visual C++ Reditsributable 2012 update 4 is not installed correctly, it is necessary to run certain programs. You might have encountered until now Adobe programs that require it.

  Otherwise, there could be another cause of this accident and if C++ installation does not help, then you need to share the event viewer crash logs. See this article for in crash logs: Photoshop Elements Editor Help. How to find the crash logs on to Windows