Results of FPGA compilation and size required FPGA

Similar Questions

• Impossible to compile and run the project

  Hello

  Last night, my project ran and deployed to the alpha of dev without problem.

  This morning (and the only thing I've done is changed my icon and splash screen) it just sits there at 91%. When you look at the progress window there are two progress bars:

  1 says Syncing and application startup

  2 said launch myapp (blocked: user operation is pending of "" to complete).

  This eventually give up and display a dialog window:

  There is problem

  Synchronization and application startup

  Deployment failed: Info: request shipment: install and launch

  News: Native on debugging

  Information: size of the 648916759 file

  Info: installation

  Info: Treatment 648916759 bytes

  News: Progress 0%...

  News: Advance 4%...

  Info: 99% progress

  actual_id:

  actual_version:

  result: failure 812/var/tmp/cgic247239: duplicate member name ' native/MyAppName '.

  It's that last line that concerns me.

  Any ideas what is happening?  My other projects compile and deployment very well.  I tried to use the device-debug and release.  I rebooted the PC and dev alpha and even delete the running configs so that they recreated

  Thank you very much

  After more digging, I came across http://supportforums.blackberry.com/t5/Cascades-Development/App-Wont-Launch/m-p/1955639/highlight/tr...

  I also tried to create a new project, but the problem persisted. But what it show me was a warning in the bar file descripter.  The assets he suggested I had a duplicate png file.  The assets tab listed my assets folder (where the image was in fact), but it was also alongside icon.png.  So I removed that in the list and hey presto - all is well again.

• WHY do we have a % * # update every 2 weeks until persists 1 really bad bug (fonts and sizes change randomly when entering)?

  Y at - it sort of STOP TB, to send updates every two weeks (and BTW this slowed down TB / crashed more and more in the last two months) until they have fix this really irritating bug to randomly change the fonts and sizes when you write an email? Outlook does not, Apple mail, didn't do so to stop spamming and begin to address the real problems for a change!

  Nothing of the sort, overall we are very poor typists. How can I know what others are doing? I do it myself. I touch type? Not and nor do the vast majority of people. Even those who say they do.

  How can I know something about the issue? I've seen other people complain and the results are similar to the serious, where my advice. In my opinion, that most of the people with problems touch with appearance and no content is also to experience. Most are apparently not aware more you are trying to improve the appearance of your mails using the fonts and sizes the worst they look almost invariably to the purchaser who does not have the police fancy you selected.

  In my opinion, the code that goes into the composer's poor by the standards of today and the suffering of his age and bitrot. Most of it is written in C++, and most of those who work on Thunderbird are people of Javascript. I do not worship at the altar of God any Mozilla and I have few illusions. Either on the code, program or the people who use it. Or at least I like to think so.

  What I hold as a hope, it's a complete rewrite of the composer happens, or at least people who can make the scriptable code so many of these things can be upholstered.

  Your comments about Microsoft releases and past years their fixation are neither correct nor helpful. Unfortunately the back doors and new threats are discovered almost daily. The software industry overall solves the problems as soon as they can and issues a patch. Automakers weigh the cost of litigation related to failure (how can die, be injured) against the cost of a recall. Sorry, but as far as I don't like regular patching, I prefer the approach of the automotive industry.

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• Internet search results shown very small and unreadable without magnification

  I have a laptop HP 15.  Whenever I have search the Internet or similar results appear very small and each page must be pinching enlarged (which includes all these HP help pages)

  Hello

  Press and hold Ctrl and press 0 (zero) to restore to the default size.

  If you want to increase the size, hold down the Ctrl key and press +

  If you want to reduce the size, hold down the Ctrl key and press -

  Kind regards

  DP - K

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• When I try to access utility 'defrag' from Microsoft, a link to "Diskeeper" is everything that happens with download and purchase required.

  When I try to access utility 'defrag' from Microsoft, a link to "Diskeeper" is everything that happens with download and purchase required.  What is an intrusion to avoid?  It is possible to access the Microsoft defrag utility?

  Glen, have you ever tried to download Diskeeper?

  If so, he may have added something on your computer for access to defragment.

  You're going to start > all programs > Accessories > system tools > Disk Defragmenter and obtaining the pop-up window?

  Check in Add/Remove programs and see if something diskeeper is installed then uninstall it.

  Post back with more information, make and model of the pc, current anti-virus, browser and operating system and the service pack.

  also:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  After back with the results.

• Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?

  Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?

  k,

  It looks like you might be haunted by the Align attribute to the ghost of the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

• How to import a layer that will have the same place and size that I have chosen?

  I have a lot of web to create files.

  All the products I have, can be chosen in 8 different sizes. And for each product and sizes, I need to put them in a room set file and then save it as a web file.

  or 10 products = 80 different web files.

  Each product to a particular size should be placed in the same area in the game room and have the same effect.

  For this, I have:

  1. create a bedroom set

  2. create models with sizes right for products to be included in the entire room (up to 8).

  3.I have created a series of actions for all sizes. Size of the image including the canvas size and export to a folder to have a layer for each product sizes.

  4.I need then to charge batteries to create a group and drag - move these files to the whole of the room.

  5 then I paste effects on all the layers in the group.

  6.I moved all layers in the right place, as a result of my models.

  So, I would avoid some steps of this... Because I have 100 products, so 800 files to create.

  If I can find a way to import (swap file one by one in the same place and sizes, she will avoid steps 3, 4 and 6, which will make my life much easier...)

  NB. Or remarks that helps...

  Hope this is not too complicated... and thank you for your help

  Jean

  If I understand correctly, you already have a common framework for all 100 products.

  For each product, you already have 8 image sizes to be placed in the parameter.

  If this is the case, the Variables can be the most convenient option that, once the model and tab delimited file are created, the placement of all the images of 800 would we automatic, accurate and extremely efficient both. Even if you work with images, I suggest rather than images and the type you watch the video and look at how it can be applied to your project.

  PS CS5 - working with Variables | The complete picture with Julieanne Kost. Adobe TV

• disk memory and space requirment for development database

  Hi all
  
  I want to know the disk space and memory required for the configuration of the environment development database.
  
  Production database size is max 25 to 30 concerts
  and only 3 user will use this database
  
  on this info my suggesion is to go with 3 GB memory 60 GB of backup space and archivelog. Let me know experts comment on that

  xuv500 wrote:

  I want to know the disk space and memory required for the configuration of the environment development database.

  Production database size is max 25 to 30 concerts
  and only 3 user will use this database

  on this info my suggesion is to go with 3 GB memory 60 GB of backup space and archivelog. Let me know experts comment on that

  How long lasts this string? ++

  So, in other words - it depends. Development environment might include a database logic dev (containing data from prod), one database Q & A logic (to test changes in dev) and a complete copy of the prod database logic (to test the final deployment).

  It could contain an R & D environment - where all data from prod is necessary for data mining research and then to deploy processes of extraction of useful data in the production.

  It could be used in a number of ways - and some of them will be more intensive in the transformation and requiring more data, than the production.

  Ideally - dev environment should look like as close as possible to the prod environment. Ideally, that means a server hardware and similar size, same o/s and Oracle versions and same volumes of data.

• JS: Point coordinates and sizes

  I tried to use both visibleBounds and geometricBounds to get an item coordinates and size on the page...

  He will give me a strange results as as10.6413765606047, 2.93075, 179.358623439395, 202.93075

  Real of the element on the page coordinates are x = 0 mm y = 20mm, L = 200 mm and H = 150 mm, displayed on the Panel,

  How can I me real suface of the element from the Group?

  can someone please advise? Thank you very much!!

  Well, what Peter has suggested is correct. You want to get the top, on the left,

  down, right coordinates of an object.

  I usually use to define my leaders to "mm" to see better or calculations

  for these purposes. Depends on choice

  Set the ruler zero point and change the units of measure in mm

  var myDoc = app.activeDocument

  myDoc.zeroPoint = Array (0,0)

  with (myDoc.viewPreferences)

  {

  var myOldXUnits = horizontalMeasurementUnits;

  var myOldYUnits = verticalMeasurementUnits;

  horizontalMeasurementUnits = MeasurementUnits.millimeters;

  verticalMeasurementUnits = MeasurementUnits.millimeters;

  }

  See you soon...

• iTunes 12.5.1.21 not remember iTunes position and size

  Update iTunes 12.5.1.21.

  Win 10 (v1607) does NOT remember iTunes position and size.

  My system uses two monitors with extended desktop. I would like to put iTunes on the 2 left / top of the page. But after the closure and revival, iTunes always appears in the center of the screen 1 and the original size when updating. She also can't remember the last page of the articles that appeared, for example, Podcasts, applications, etc. When iTunes has been closed. Instead always defaults to the page music.

  Also on launch a screen "Welcome" iTunes with No thanks / OK buttons on bottom is displayed momentarily before displaying the page of music. There is not enough time to read what this screen offers. Looked in the menus to try to find this page to display... no luck.

  Anyone else having these issues?

  Same problem here.  Very annoying.  Each time is like the first time, which is great when you talk about sex, but not when you run iTunes.  All versions up to now has been able to hold its window size and position, but not anymore.  I also find the interface is very slow to boot.

• Font and size: how to change the default (for outgoing e-mail)?

  I'm going to 'Write', I put it in the address, etc., and when I start typing my message, the font size is tiny, the font is Times, although sub
  Format - fonts, I see Helvetica and size is extra-large. Sometimes using "fixed width" gives me a better font size. I then choose a font of
  "Choose a font", and I'm all set. However, I have to go through the same procedure for each e-mail! Help!

  Try changing the settings in Tools - Options - display - (tab) - (article) fonts & colors - formatting, enter a default font and the font size to use when NO other formatting is specified.
  Now press the button on the same line,
  in the next window, make sure that the police and & the font size you want entered in the selection boxes.
  Under the control of the police - the two boxes ticked? Your choice.

• TypeError: try to run the script compilation and go on a 'mistake' in scope cleared when message returns the transfer through images for each image. Does not affect viewing.

  TypeError: try to run the script compilation and go on a contour

  Above the error message appears when moving between images - back and forth. By clicking on the OK button removes the error message and there is no apparent problem. The window that appears refers to a JAVA Script Application (I guess that FIREFOX is the application?)

  -> Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems

  Check and tell if its working.

• How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  I found a solution! -Set the size and position of the façade with the help of the

  File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

  then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

  OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.