Resumption of quiz button?

I use Captivate 9 - I created a questionnaire with endless attempts.  When I do not see the test for the first time on the 'score' page I see the 'recovery', 'review' and 'continue' button.  I click on the button "Edit" review quizzes and when I get to the page to "mark" the button of "recovery" not available so I can't resume the quiz.  What Miss me in the establishment?

Design resume your review is the following: the recovery button remains active as long as you do not use the Edit button. Review button should be used when all attempts at the Quiz level are exhausted. To avoid that the user is lost, I recommend to slide under the Retake button display button (can be done on the slides to the slide of score model).

The button continue will launch the action that you specify in the Quiz preferences on the success and failure. But the last action will be executed only after the last attempt at the Quiz level. Since you have endless attempts, the action in case of failure will never run, the user will never be able to get if he does not pass the test. Is it really what you want?

More details in:

Question Question slides in Captivate - Captivate blog

Question Question slides - part 2 - Captivate blog

Tags: Adobe Captivate

Similar Questions

  • View the resume Quiz button

    Adobe captivate 9

    I checked the 'Resume Quiz button display '.  However, how do I know the button to start at the beginning of the quiz?  At this time the Start button on the slide.  Any ideas?

    The Retake button Reset all the answers in the quiz slides and return the user to the first marked point or question slide. Nothing else to do which allows multiple attempts on Quiz level and by checking the option to show a recovery button. The recovery button should disappear when the Quiz level attempts are exhausted. I don't understand what you're trying to explain. Can you give more details?

    You can check the Advanced Interaction Panel: you will find it all marked.

  • Captivate 9: How do SmartShape converted search style by default Quiz button button

    I created a SmartShape and converted into a button for use on slides (the continue button on the right in the photo below). All the features works well. I just need to make the button continue SmartShape look like the button again the assessment with the bevel effect. I don't see a way to do this. It seems not that I can apply the "Default Quiz button Style" at the SmartShape button. I don't see a way to manually add a bevel effect to the SmartShape button and I don't see a way to remove the wedge of iron the evaluation key. Whatever the solution, I just need the buttons to look the same. Is this possible? What Miss me it please?

    Captivate Buttons.png

    If you turn the button continue in a Transparent, set Alpha to 0 and width of line 0 button, it will always be on top of the stack, because it is an embedded object. Create an image that looks like the original key and that showed with the fast action.

  • How can I make the quiz button download the image appear?

    Hello.

    I am trying to replace the button 'Submit' I use in a quiz, but the button to download a new button does not appear. Here is a screenshot so you can see what I mean:

    Untitled-1 copy.jpg

    The button normally appear to the right of the drop down list 'Button Type', but is no longer. I tried the following hotfixes, which none have worked:

    -Resizing of the window

    -Closing and reopening of Captivate

    -Clear cache project

    -Remove temporary files

    -Deletion of the folder, preferably

    Any thoughts on what I can do? Because there is a "submit" button quiz, I'm unable to download the button image and use a place-clickbox.

    I use 7 Captivate.

    Thank you.

    The Send button is an embedded object (has no separate scenario) all quiz slides, the most important of them because you should never delete to avoid the screwing of the functionality of the Question slides.

    You don't say HOW you tried to achieve this goal? You can check the style of the buttons of the Quiz in the Style of the object manager?

    Another solution would be to use an image and do the quiz button style so that it is invisible (no label, no fill, no stroke). To output SWF button will remain active.

  • Resume Quiz button goes to good question 1, but then displays the content between the questions in the module

    I am using Captivate 8, win 7 64 bit

    I have 4 modules with graded questions after each module. When I click on the Retake Quiz button on the failure of quiz, I got properly into question 1/quiz module 1. But after receiving questions from module 1, I am taken to the content of module 2. Etc.

    How to display only the questions about the failure of quiz? The revisions quiz option on doing just that - questions only - no intermediate content.  Why not the possibility to resume the Quiz?

    Thanks for your help!

    SMILES,

    Susann

    Sorry, it's the design of slides of the Quiz, fairly strict rules. You can replace it using a conditional or shared tip action on enter for each or the first, according to the linearity of the course, slide after a slide of questionnaire content. There is a variable cpInfoAttempts of system quiz that is incremented each time you click the button back. It has the value 1, the first time you take the test. If you create a condition like "IF cpInfoAttempts is greater than 1, you know you're in at the second attempt. At this point, you can jump to the first question slide in module 2.

  • Resume Quiz button not displaying when published

    I use 8 Captivate and Retake Quiz button does not appear when I publish the course. Nobody knows what can happen?

    How many attempts do you allow in Quiz preferences, the Quiz level?

  • I deleted my review quiz button!

    I deleted my accident review quiz button... and now I can't get it back.  It gives me an option to indu.  I want students to be able to examine their incorrect answers after taking the quiz.  How can I get it back?  Can I add my own?

    Check the Quiz preferences, settings and "Allow users to Review Quiz". It is an object embedded with a very specific feature, you will never be able to add a custom button that does the same thing.

  • After update CP8 8.0.1.242 Quiz buttons disappear

    I installed the latest patch yesterday. Before the patch, I published my quiz and everything worked fine except the audio from the last slide would start after the first correct answer (no idea why). After the patch all my quiz buttons disappear. These are custom image buttons that replace the original CP buttons. Someone had a similar problem?

    I ended up installing a CP8 and re - install it and now everything seems to work as a graph (fingers crossed).

  • Captivate Review Quiz button

    Hello everyone

    Have created a quiz in Captivate, I'll settle for the user to review quiz if they. (90% success rate so I want to see what questions they got wrong).

    I don't want the user to review quiz if they fail (because this will show them the right answers, effectively allowing them to cheat their way through the quiz twice).

    If someone could please give me an answer to my question, it would be greatly appreciated.

    Thank you!

    Ok. Well in this case you will need using Variables and advanced Actions.

    You cannot selectively DISPLAY the Review Quiz button on the Quiz results slide, and can hide under something other than one of the components of this slide (that's why I suggested using the Retake Quiz button) by default.

    You must have a variable of follow-up that record whether the user past the quiz for beginners.  Have this variable set to 0 by default, and 1 on slide enter Quiz slide results (using a conditional action) IF the student passes the course.

    If the user clicks the review Quiz button, it will take the learner to the first quiz question and also set a System Variable Captivate following if the user is in view.  You can run a conditional action by slide enter each question quiz to check if the learner is in playback Mode, and whether or not they have passed the quiz before allowing them to post the question quiz in review slide. If they have not passed the test yet, then the conditional action must jump them to a slide that tells them that they must pass the test before trying to see him.

    Quite frankly, I'd rather give of the learner 2 or 3 more attempts at the quiz (via a Retake Quiz button) before forcing them to redo everything.

  • Return to the Navigation of the Quiz button

    Where is the Retake Quiz button on the result page of the quiz that is supposed to run the user when he clicks on it?  I wish I could change the result of this button to access a specific page.  Currently, it seems to direct them to a page that is a few slides before my quiz, but has nothing to do with the quiz.  I have no idea why it does not there or how to change the navigation for her.

    Thank you!

    David

    If you allow moving backward in Quiz preferences, Yes, user will be able to move in the range Quiz. Might suggest to view the playback on the content slides bar, so that the user can skip certain slides quickly and then hide it when you go behind the scenes of the real question.

    Lilybiri

  • Quiz button text - centering

    Hello

    I had this nested in an old post and apologize for the duplicate entry, however I really need help.

    When I first create a quiz I have nice looking buttons like those shown below.

    1.jpg

    If I can go to another breakpoint buttons resize to be too small, as shown in the image below. The buttons are the same (too small) back at the office, breakpoint as well.

    2.jpg

    When you try to resize the buttons that they only resizing framed on the left. as shown in the image below.

    3.jpg

    It is not anywhere in the object Style Manager which allows you to Center justify text.

    4.jpg

    How do you get decent buttons to research on quizzes of your sensitive project?

    Thank you

    Tony

    -With the help of Captivate with reactive model

    It turns out that option "automatic resizing buttons" in the preferenaces was the reason why the buttons shrunk down to the size of the text. Uncheck the button and make an another new quiz page and they don't resize.

  • Custom for survey/quiz buttons?

    Hello

    I'm new to Captivate by using C9 on 10 to win. I searched the forums for this issue, tried some things, but I can't always seem to get the results I need.

    Is there a way to customize the buttons in a poll/quiz slide? I want simply to be a rectangle with rounded corners, and on the steps of button control. (Something easy to do with objects in the content slides) There are custom image buttons that come with Captivate, but even when I find one with the right shape, I can not change the color or text at all. (Please correct me if I'm wrong here.)

    I tried the workaround solution I found on the forums, where you put the desired under a transparent button shape. The only problem was, there was no way to make the steps button works. Since I had to keep the real button size same-ish on the top of the form so users would click the transparent button or form (transformed into a button that does nothing) would allow key steps look good.

    Is there a way to make custom in polls/quizzes buttons that allow the stages?

    Thank you!

    Buttons on question slides partition cannot be replaced by form buttons that's too bad. However, it is possible to use the other normal buttons: go to Manager of Style of the object, in the objects of the category Quizzing and replace styles by default current button that you want to. You can check on the slide master Quiz what it looks like, because the little insight in the OSM will probably not sufficient. The buttons are used right now, depends on the theme you are using (Object styles and master slides are always elements of the theme), and they use the same type of button.

  • Resume the quiz button has disappeared...

    I'm trying to put the button quiz recovery on my quiz results... page is to show on the model, but not on the current page in the film strip? Hmmm what setting change... Or is there something I missed?

    Your problem is solved? Thread is marked yet unanswered

  • Review Quiz button do not navigate to the first quiz question...

    Hello

    so I created a guide to simulation of interactive software for users in my organization. At the end of this guide, there is a quiz (multiple choice, true or false questions) with 15 slides. At the end of the quiz, the results screen is displayed with the button "Review Quiz". Clicking it navigates the user to drag the 72/245 rather than the beginning of the quiz, the first question.

    How can this be corrected?

    Thank you very much

    Achello

    You have an interactive object somewhere on this slide that is orchestrated to appear on the quiz.

    Open the dialog Advanced Interaction (F9) and search for the object here.  Delete the partition.

  • Quiz button is grayed out but functional.

    I have a simple multiple choice quiz in Captivate 6 and it works fine. The only problem is that the next button is gray, even if it is functional. I don't want the student to be misled and think that he or she is not ready to move to the next slide again.

    Someone has an idea what is cause of that? Thank you in advance!

    Simone

    Capture2.PNG

    You were right all the time, the quiz settings caused the «question» I should have used "Required", instead of "Answer All".

    Detective Conan.

    Thank you!

Maybe you are looking for