Helps to remove the remaining files after removal of CA security.

Similar Questions

• When I try to delete the remaining files, I get error 0 x 80004002

  Original title: error 0 x 80004002

  I just uninstalled the free NITRo pdf Reader worm, however I still see running.

  When I try to delete the remaining files, I get the above message,

  Help, please.

  Thank you

  Mr. Zaid has S has

  Hey Zaid,

  ·         Do you see Nitro pdf reader running in the Windows Task Manager?

  This problem occurs if the program is not uninstalled properly. Follow these methods and check if that helps:

  Method 1: I suggest to remove the files in safe mode and check.

  Start settings for Windows (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  Method 2: Try ending the Nitro pdf reader process in Windows Task Manager and see if it helps:

  1. open the Task Manager by right-clicking on the taskbar and then click on Task Manager.

  2. If you see Nitro pdf reader in Task Manager right click it and click end task.

  3. click on more task and complete the process associated with Nitro pdf reader.

  You can also try the Nitro cleaning tool from the link below and check if it helps. If the cleanup utility does not remove Nitro Reader please try install Nitro Reader and then uninstall and check if it helps:

  http://SupportTools.nitropdf.com/

  Hope this helps, if the problem persists we know that we will be happy to help you.

• How to let axSequenceView view the sequence file, after the opening before the race.

  

  How to let axSequenceView view the sequence file, after the opening before the race.

  I would do it differently, you do not see when running because your sequence control is connected to the requeteexecution Manager. I have two controls of the same size that sits on top of the other, one connected to requeteexecution as it is by default and the other to SequenceFileView Manager.

  You can then use reminders to start execution and execution of end events in the user interface to make the control visible. It is very easy to achieve.

• where the application is stored in the weblogic file after deployment?

  Hello, I am beginner of WebLogic Server12C.

  I deployed a project of console gui war. However, I can't find where the expansion.

  I can find. "" appmergengen folder "and"_WL_user folder"in the tmp folder.

  They exploded Archive Directory. However, they are in the tmp folder.

  So could you tell me where the application is stored in the weblogic file after deployment?

  I find no specific document of the oralce site documents.

  The application that you deploy to weblogic may be placed under a folder tmp only under appropriate weblogic server instance i.e. Managed server / Server Admin

  It will be cached in the exploded only form and not in WAR or archived form.

  Hope that clarifies!

  Thank you

  Vijaya

• Remove the uninstallation files after an upgrade

  After an upgrade to Windows XP, I used to remove the uninstall files in the system directory.

  
  

  Is it possible to do it on Vista?

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any update/Service Pack problem or issue in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7, cannot remove the burn files after back to the top

  I have a 64 bit Windows 7 laptop. A year ago I started a return upwards to put on a disc. The backup failed at the time because I ran out of records to put on (had no idea that it would take as much!).

  Since then I tried to delete these temporary burn files from the F drive, but every time I click on the option, it breaks down and wrote files are used by another program. I went through and individually deleted most of them, but I still have a few huge to get the judgment and cannot remove the program (86), or on the desktop to the top, mean that they are used by another program.

  I burned a CD of all these left during the backup of files and that worked, but the files are still sitting in my drive F, I still can't delete the temporary versions... its taking a lot of space and I got the bsod a couple of times.

  I also tried folder in the start menu and delete the temporary files in this way, but it did not result in the F drive.

  I tried to rename the temporary files so that I could remove them too, but not to chance it.

  I have disc clean up all the time, this doesn't always help with the F drive.

  Your opinion would be appreciated!

  See you soon

  How can I access these temporary files to remove safe mode back Burns?

  Files waiting to be burned are kept in this hidden folder:

  C:\Users\JDogg\AppData\Local\Microsoft\Windows\Burn\Burn

  To open the folder, you type his name in the address bar of Windows Explorer.

• need help on deleting the recent files in photoshop on Mac.

  When you start up of photoshop and your in the start screen where it shows all your files, how to remove the file from this screen. I can remove them from my finder section where it shows all the documents and files and downloads, but it will not remove them from the recent files in photoshop. I need to clean my files please help.need

  Hi charlienelson,

  Please follow the steps below.

  > Launch Photoshop

  > Click on file > open recent > clear recent files list

  > Restart Photoshop and check for the issue.

  Let me know if it helps.

  ~ UL

• Cannot save the Lightroom files after editing in Photoshop CC (or they are invisible).

  When I export a file from Photoshop CC 2015.1.1 in Lightroom, the "Edit a copy" screen does not appear.  The image opens in Photoshop, I make the changes, press on save, close Photoshop and I went back to Lightroom with no new image modified either because it has never made a copy in the first place the new file edition is invisible (see below).  Spent hours on the phone with Adobe and we theorized it was multiple copies of Photoshop on different drives.  I physically removed all disks except one, and the problem remains.  Have uninstalled and reinstalled several times. I have the latest version at all (it started with c. 2015.1.1).  Photoshop 6 works very well and doesn't have this problem, although I have copies of 6 PS on several other non Adobe software players works fine too.

  If there is more than one custom "slot" for external editors in Lightroom, I wouldn't even post this question because I could bypass Photoshop CC entirely.  But as it is, one of my two choices of editor external links Photoshop CC.

  Tip: If I put the file in the quick Collection, things are like the old days.  I get the screen to export, a copy is created, modified in Photoshop CC and when Photoshop CC is closed, the modified version is visible in Lightroom.  However, when I try to move the file edited in quick Collection in the folder where it belongs, Lightroom says that it's already there - which it may be, but it is invisible.

  P.S. I just discovered that it IS possible to specify more than one external editor, this is a temporary solution, given that I can use Photoshop 6 and like many other apps I want instead of PS CC.

  If Photoshop is the main editor in Lightroom, it will not ask to create a copy for raw images.

• sfc/scannow foud the corrupted files after upgrade from Vista Home Premium 32 bit

  Hello

  It is an event that I went through:

  (1) recently I received a bunch of updates to Vista Home Premium 32 bit, after I did the update I decided to perform sfc/scannow task and this is the error message I got the "Windows Resource Protection found corrupt files and managed to fix them." Details are provided in the CBS.log windir\logs\CBS.log newspaper. For example c:\windows\logs\CBS\CBS.log

  Repair of system files change will take effect after the next reboot.

  (2) so I did restart and then try to run the sfc/scannow task once again, but I still got the same message I described in step 1 again. So basically sfc/scannow function did not repair the corrupted files.

  (3) the next step, I decided to perform a repair Installation of visa which took me 10 hours to complete the task, once the task of upgrading of repair has been made and before the windows update, I ran sfc/scannow task and this time he finds any corrupted files, but after I updated windows sfc/scannow result was the same as step 1.

  It is obvious to me that one of the updates of the origin of this problem, but find it me hard to pinpoint that one. So I am writing this e-mail to help and I hope that the problem will soon be solved. Please let me know if you need me to submit the CBS.log file for you to review thanks in advance.

  Kind regards

  Jdec9

  Hello

  Sorry to hear that you are facing a problem due to the update of Windows. I'll certainly do my best and get the issue resolved.

  I suggest you to view update history to see which update might be causing the problem.

  (a) open Windows Update by clicking Start , all programs, and then Windows Update.

  (b) in the left pane, click view update history.

  (c) to display more information about an update, double-click it.

  Once you know Update KB number, provide us with the same for later analysis. You can also try the steps in the article and see if it helps.

  You can also download the files of cbs to Skydrive.

  Use SkyDrive download collected files and post screen shot/image

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Need help to get the system restored after Trojan virus. does not work in safe mode

  We were running without anti-virus software.  System started running very slow and wouldn't normally.  He has started in Mode safe has finally got and ran Malwarebytes detected 2 Trojan virus.  Those removed, installed Norton in safe mode, but can not get computer to open in normal mode for the comprehensive analysis of norton and difficulty.  Help!

  The only way to be sure you are free of malware is to format and start over.

  If you have a backup from before the problem you can restore.

  If not and you have the win 7 dvd you can re - install.
  '
  If not and you have a factory restore partition, you can restore from that.

  If this isn't a clean install.  You will need a win 7 dvd and number series.

• Why am l always signed the temporary file after the effort of system restore

  Whenever I put on my system, there seems to be a message on the screen saying I am registered on the temporary file, and everything I do will be unavailable after leaving the game.

  Hello

  Thanks for posting your query in Microsoft Community.

  -Is the account of an administrator account or a standard user account?

  I suggest you to follow steps by Pinaki displayed on November 22, 2012 to from the link below and check.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-update/Windows-8-keeps-loading-with-temporary-profile/583abee6-645D-42a1-88da-063547c6eea0

  Help us with more information to help you further.

• Shooting in RAW + jpeg? How can I access the RAW files after download?

  I have a Canon 70 d. I've been shooting in RAW + jpeg but only see jpeg files after downloading? How to access RAW files? I have not yet PS/LR.

  You can use the DPP software provided with the camera.

• easy transfer can be used to reload the data files after formatting hard drive?

  I have been informed by level microsoft 2 I have to reformat my hard drive to fix the problem with windows backup (snapshot won't work).  easy transfer will copy all THE data files, including OUTLOOK 2007 on hard drive and then I can reinstall on reformatted drive.

  Easy transfer copy some things but not all things. He does more that can make a simple copy/paste (such as the settings for example) but, for example, not programs transfer (those who need to be put back in place).  Here is a description of what it does (and does not): http://support.microsoft.com/kb/928635.  It will transfer Outlook 2007 PDF files and other personal data if they are selected - you need to know which files you need and where to select them - but it won't transfer the program (which must be put back in place).  It must be run before you reformat the hard disk to collect data and then you can transfer everything what you have registered once the system is re-installled.  You would do the re-setup prior to the transfer.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• does not restore the system files after clean install

  When I click on the HARD drive which has my backup file, it says that "windows could not find and backup sets on e:\.» Please selection elsewhere. "When I click on"Refresh"this disc shows up... again.  When I look at the contents of the disc there is a file named: N360_BACKUP, however it will not recognize it, so, not restore it.

  Is there another way to restore my files? I was really counting on this form of backup, and if I can't restore it, I lost all my emails, email addresses, contacts and favorites for the past two years, no to the meniton photos, music, etc.

  I have looked at similar positions here and tried the suggestions in them with no luck.

  Hello Terryjoe,

  Thank you for your message.  The N360_Backup referred to Norton 360.  We will be more than happy to help you to restore your data, please answer a few questions first well.  What version of Norton 360 backup/restore are you using?  Below are the steps for version 2:

  1. go to the folder C:\Program Files\Norton 360\Engine\3.x.x.x, you will find a tool Arestore.exe (3.x.x.x allows 3.0.0.134 or 3.0.0.135 depending on your version)

  2. navigate to the folder C:\Program Files\Norton 360\MUI\3.x.x.x\09\01, you will find an Arestore.loc file ((3.x.x.x allows 3.0.0.134 or 3.0.0.135 depending on your version)
     
  3. copy Arestore.exe and Arestore.loc to the root directory where you saved the backup created using Norton 360 (the long file aside the N360_BACKUP) and run Arestore.exe.  It will look in the N360_BACKUP folder to your backup set.

  In your case, you must copy Arestore.exe and Arestore.loc to the external hard drive where you have the file N360_BACKUP. Double-click on Arestore.exe, it will work and restore all your saved data.

  If this does not work, go to the next series of steps...

  4. If she fails to find your backup set, you must delete the corrupted catalog file.

  To delete a catalog file corrupted, go to the N360_BACKUP folder.  There should be a folder with a long alphanumeric name, open that folder.  You can see a file named backup.@db.  It is the catalog file.  You must move this file in this directory (put on your desktop for added security).

  5. Once backup.@db has been deleted, go back and try to run Arestore.exe from the root directory.

  Note: This process may take some time.

  http://community.Norton.com/Norton/board/message?board.ID=Norton_360&message.ID=14505

  See you soon

• Erase the name on the user files after

  I have a laptop with windows 7 installed second hand. After getting it, I immediately deleted this users account in Control Panel our association and created my own but now their name appears before the name of the file and the label of the user such as Maggie/Robert. I have tried everything I can think off except completely wipping summer car.

  They easiest way to solve this problem is to create a new account of a user with administrator privileges.

  You cannot delete the name.

  When you have set up the way you want to and copied the data files you want, you can delete the old user.

  See this.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile