retrieve data from an oracle table

Similar Questions

• Create the flat file data from the oracle table

  d_adp_num char (10)
  d_schd_date tank (8)
  d_sched_code tank (25)
  d_pay_code char (50)
  d_mil_start char (4)
  d_mil_end char (4)
  d_duration char (5)
  d_site_code char (4)
  d_dept_id tank (6)
  
  Select payroll_id,
  schedule_date,
  reason_code, (sched_code)
  reason_code, (pay_code)
  start_time,
  end_time,
  total_hours,
  site_code,
  department_id
  of dept_staff
  where schedule_date between (sysdate + 1) and (sysdate + 90)
  
  
  loading data for the date range instead.
  sched_code - if 'Unavailable' reason_code = 'OD' and 'THE '.
  
  pay_code - "Berevevement BD" If reason_code = "BD".
  "UP PTO without reasonable excuse" If reason_code = 'UP '.
  "RG" If reason_code = "SH".
  "PTO" If reason_code = "GO".
  Here are some...
  
  start_time and end_time - convert military time
  based on start_ampm and end_ampm
  
  On this basis, I need help to create a flat file. Sewing of the flat and data file in dept_staff sample
  
  If site_code is there so no need to get department_id (see the sample flat file)
  ------------------------------------
  
  examples of data to flat file
  
  ZZW002324006072012 PTO
  0800160008.00
  ZZW002428106072012 RG
  1015174507.50HM34
  ZZW002391606072012 RG
  1100193008.50
  ZZW002430406072012 RG
  1100193008.50 130000
  ----------------------------
  
  dept_staff table data
  
  REASON_CODE_1 PAYROLL_ID SCHEDULE_DATE REASON_CODE START_TIME, END_TIME START_AMPM END_AMPM TOTAL_HOURS SITE_CODE DEPARTMENT_ID
  ZZW0024468 08/06/2012 HS HS 730 HAS 400 850 12 P
  ZZW0000199 08/06/2012 HS HS 730 HAS 400 850 14 P
  ZZW0023551 08/06/2012 SH SH 1145 A 930 975 GH08 95 P
  ZZW0024460 08/06/2012 SH SH 515 HAS 330 P 1025 GH08 95
  ZZW0023787 08/06/2012 SH SH 630 HAS 300 850 24 P
  ZZW0024595 08/06/2012 TR TR 730 HAS 400 850 90 P
  ZZW0023516 08/06/2012 OD OD 800 HAS 400 800 95 P
  ZZW0023784 08/06/2012 OD OD 800 HAS 400 800 5 P
  ZZW0024445 08/06/2012 SH SH 1145 A GH08 930 975 5 P
  ZZW0024525 08/06/2012 OD OD 800 HAS 400 800 23 P
  ZZW0024592 08/06/2012 TR TR 730 HAS 400 850 5 P
  ZZW0024509 08/06/2012 SH SH 95 MK21 830 HAS 330 P 700
  
  ZZW0023916 06/14/2012 SH SH 1100 A 850 27 730 P

  How to ask questions
  SQL and PL/SQL FAQ

  UTL_FILE allows to write the OS file

• XML from the Oracle Table data

  Hi all
  
  I'm new to this network. I'm also new to oracle XML package. I want a help with the query below.
  
  CREATE TABLE EMP (ID NUMBER PRIMARY KEY, NAME VARCHAR2 (10), TELEPHONE NUMBER);
  
  INSERT INTO EMP (ID, NAME, PHONE) VALUES (11, 'Joy', 1234);
  INSERT INTO EMP (ID, NAME, PHONE) VALUES (22, 'Mike', 5678).
  INSERT INTO EMP (ID, NAME, PHONE) VALUES (33, "Jason", NULL);
  COMMIT;
  
  I want to export data from the EMP table in an XML file with the format below.
  
  Power required:
  
  <? XML version = "1.0" encoding = "UTF-8"? > < Joy STATICDATA > < EMP > < ID > 11 < /ID > < NAME > < / NAME > < / EMP > < / STATICDATA >
  <? XML version = "1.0" encoding = "UTF-8"? > < Mike STATICDATA > < EMP > < ID > 22 < /ID > < NAME > < / NAME > < / EMP > < / STATICDATA >
  <? XML version = "1.0" encoding = "UTF-8"? > < Jason STATICDATA > < EMP > < ID > 33 < /ID > < NAME > < / NAME > < / EMP > < / STATICDATA >
  
  I used some XML functions and you wrote the following query.
  
  Select XMLROOT (XMLELEMENT (staticdata, XMLELEMENT (EMP, XMLELEMENT(ID,ID), XMLELEMENT(NAME,NAME))), version "1.0" encoding = "UTF - 8') xml EMP;
  
  my query output:
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < STATICDATA >
  < EMP >
  < ID > 11 / < ID >
  Joy of < NAME > < / NAME >
  < / EMP >
  < / STATICDATA >
  <? XML version = "1.0" encoding = "UTF-8"? >
  < STATICDATA >
  < EMP >
  < ID > 22 / < ID >
  < NAME > Mike < / NAME >
  < / EMP >
  < / STATICDATA >
  <? XML version = "1.0" encoding = "UTF-8"? >
  < STATICDATA >
  < EMP >
  < ID > 33 / < ID >
  Jason < NAME > < / NAME >
  < / EMP >
  < / STATICDATA >
  
  
  But I want the out as the power required above. all records in a single line. can someone help me achieve the desired output. also can I export all columns of the table with something like select * from the table in the XML file?
  
  Thank you
  Delobelle

  Don't know why you need it on a single line, but you could:

  Select XMLTYPE (REGEXP_REPLACE (XMLROOT (XMLELEMENT (staticdata, XMLELEMENT (EMP, XMLELEMENT(ID,ID), XMLELEMENT(NAME,NAME))), version "1.0" encoding = "UTF - 8'), CHR (10) |)) ' *<><'))>
  FROM EMP;

  SY.

• to retrieve data from xml data type

  Hello...
  I have a doubt in the oracle database... Here's how to retrieve data from xml data type?

  Like this...

  SQL> ed
  Wrote file afiedt.buf
  
    1  with t as (select xmltype('
    2  
  
    3    
    4      toMonth5
    5      ctTestPan1
    6      costType2
    7      toYear2012
    8      fromMonth12
    9      fromYear2011
   10    
   11  
  ') as xml from dual)
   12  --
   13  -- end of sample XMLDATA, use below query on your own table etc. as required
   14  --
   15  select x.*
   16  from   t
   17        ,xmltable('/DETAILS/FIELDS_VALUES/FIELD'
   18                  passing t.xml
   19                  columns name varchar2(30) path './NAME'
   20                         ,val  varchar2(10) path './VALUE'
   21*                ) x
  SQL> /
  
  NAME                           VAL
  ------------------------------ ----------
  toMonth                        5
  ctTestPan                      1
  costType                       2
  toYear                         2012
  fromMonth                      12
  fromYear                       2011
  
  6 rows selected.
  

• Export data from the database Table in the CSV file with OWB mapping

  Hello
  
  is it possible to export data from a database table in a CSV with an owb mapping. I think that it should be possible, but I didn't yet. Then someone can give me some tips how to handle this? Someone has a good article on the internet or a book where such a problem is described.
  
  Thank you
  
  Greetings Daniel

  Hi Daniel,.

  But how do I set the variable data file names in the mapping?

  Look at this article on blog OWB
  http://blogs.Oracle.com/warehousebuilder/2007/07/dynamically_generating_target.html

  Kind regards
  Oleg

• create the http client to retrieve data from web service

  Hello

  I am newbie on our webworks. I need to retrieve data from web service. How to connect to this service and analyzed. There is a tutorial that can help me get started with it.

  Can any one advice me how can I start working with webworks on blackberry 10

  Thanks for any help

  In general, you will need to use an AJAX call to the server

  It really depends on what the server returns as to how the information is easy to digest

  JQuery provides a simple interface, and returns information easy to use

  If you deal with things gets complicated XML according to namespace

  If you look at the raw XML data and it goes something like fred: name you will have questions requiring an implementation of SAX - JSON is simple if you don't get that even if (nothing too confusing here)

  If using an external data source JSON go if you have the choice

  As examples go - just look to the top of JQuery Ajax [JSON / XML] and you will get where you're going quickly

  SAX is MUCH harder because of the namespace - Dublin is the most common and same XML without namespace is not simple to handle, so avoid it if you can

• With the help of the socket object to retrieve data from web application without the html files

  I tried to use the socket object to retrieve data from a web application (I just control script version vs version online). So all I want to do is access http://hyle.io/version that returns me the current version of the application (such as a simple string) in order to compare it in my script and then notifies the user accordingly. I have just a few problems using the socket object. I used this code from the Adobe Javascript Tools Guide:

  
  

  reply = "";
  conn = new Socket;
  // access Adobe’s home page
  if (conn.open ("www.adobe.com:80")) {
  // send a HTTP GET request
  conn.write ("GET /index.html HTTP/1.0\n\n");
  // and read the server’s reply
  reply = conn.read(999999);
  conn.close();
  }
  

  ... that I then adapted as:

  reply = "";
  conn = new Socket;
  if (conn.open ("hyle.io:80")) {
    conn.write ("GET /version HTTP/1.0\n\n");
    reply = conn.read(999999); 
    conn.close();
  }
  

  And here is what I get:

  HTTP/1.1 400 Bad Request
  Content-Length: 225
  Content-Type: text/html
  Server: Pagodabox-Routing-Mesh
  
  Bad Request
  Your browser sent a request that this server could not understand.
  Résultat : true
  

  I don't know a lot about HTTP requests, but I wondered if it was related to the fact that I am not pointing to a specific HTML file and the type of request was wrong or if I should rather check if there is something wrong with my host?

  The site/app is PHP and is hosted on PagodaBox if it helps.

  Thanks in advance!

  Hi Sebastien Lavoie,

  It should work

  var HTTPFile = function (url, port) {}

  If (arguments.length == 1) {}

  URL = arguments [0];

  port = 80;

  };

  This.url = url;

  This.port = port;

  this.httpPrefix = this.url.match(/http:\/\//);

  This.Domain = this.httpPrefix is nothing? This.URL.Split("/") [0] + ":" + this.port: this .url .split ("/") [2] +":" + this.port;

  This.Call = ' GET ' + (this.httpPrefix == null? ' "). " http://" (+ this.url: this.url) + "HTTP/1.0\r\nHost: ' + (this.httpPrefix is nothing? "This.URL.Split("/ ") [0]: this .url .split (" / ") [2]) +" \r\nConnection: close\r\n\r\n ";

  This.Reply = new String();

  This.Conn = new Socket();

  This.Conn.Encoding = "binary";

  HTTPFile.prototype.getFile = {function (f)}

  var typeMatch = this.url.match(/(\.) (\w{3,4}\b)/g);

  If (this.conn.open (this.domain, "binary")) {}

  This.Conn.Write (this.) Call);

  This.Reply = this.conn.read (9999999999);

  This.Conn.Close ();

  } else {}

  This.Reply = "";

  }

  (Return this.reply.substr(this.reply.indexOf("\r\n\r\n")+4);

  };

  }

  Hyle var = new HTTPFile ("http://hyle.io/version");

  Alert (hyle. GetFile());

  And by the way, I like the idea of 'http://hyle.io'. Can you give me your email address, I want to learn more about this Web site.

  Please send me an email to [email protected]

• retrieve data from staging account

  Hello
  
  does anyone know how we can retrieve data from staging of account using 'Segmentation Wizard', "report analysis tool", model of fusion and mailing, etc.?
  
  Seems that these tools connect only to the production instance...
  
  Thanks, Sab

  SAB,

  for segmentation Wizard (and perhaps other office files), you will have to go file - properties - Custom and update the values for the name of pod, if you have a job you know what value it is as I am not "have a practice to watch.

  see you soon
  Alex

• [Urgent] Retrieve data from oracle datafile partially crushed

  We have a big problem, we stopped in a backup/restore process from production to the test database because we found that some development SP/package code was not saved previous test DB. Now we have partially crushed oracle datafile and I guess that / hope the compiled code was stored in the last section of the data file, there is a way to retrieve the data from this data file? I intend to use an editor of exadcimal as a last resource, hoping that the data was not encrypted, but if there is another useful tool could be better. There are other storage media like newspapers/redo logs reach where we can try to find the lost code? The machine was not under a protocol of backup, so we can't count on that.
  
  Help, please
  
  Fabrizio

  MS code is stored in the dictionary (System tablespace), if you were restoring with RMAN, is the last file to restore.

  Good luck!
  : p

• Load xml data into an Oracle table

  Hello
  
  I went through some threads in the forums itself, but for my requirement that nothing comes closer, I write my request. I have a XML like this
  <? XML version = "1.0"? >
  < ACCOUNT_HEADER_ACK >
  < HEADER >
  < STATUS_CODE > 100 < / STATUS_CODE >
  Check < STATUS_REMARKS > < / STATUS_REMARKS >
  < / Header >
  < DETAILS >
  < DETAIL >
  < SEGMENT_NUMBER > 2 < / SEGMENT_NUMBER >
  PR Polytechnic < REMARKS > < / COMMENTS >
  < / DETAILS >
  < DETAIL >
  < SEGMENT_NUMBER > 3 < / SEGMENT_NUMBER >
  < REMARKS > PR Polytechnic administration < / COMMENTS >
  < / DETAILS >
  < DETAIL >
  < SEGMENT_NUMBER > 4 < / SEGMENT_NUMBER >
  < REMARKS > rp Polytechnique finance < / COMMENTS >
  < / DETAILS >
  < DETAIL >
  < SEGMENT_NUMBER > 5 < / SEGMENT_NUMBER >
  < REMARKS > logistics Polytechnique rp < / COMMENTS >
  < / DETAILS >
  < / DETAILS >
  < HEADER >
  < STATUS_CODE > 500 < / STATUS_CODE >
  < STATUS_REMARKS > process exception < / STATUS_REMARKS >
  < / Header >
  < DETAILS >
  < DETAIL >
  < SEGMENT_NUMBER > 20 < / SEGMENT_NUMBER >
  Basic Polytechnique < REMARKS > < / COMMENTS >
  < / DETAILS >
  < DETAIL >
  < SEGMENT_NUMBER > 30 < / SEGMENT_NUMBER >
  < / DETAILS >
  < DETAIL >
  < SEGMENT_NUMBER > 40 < / SEGMENT_NUMBER >
  Finance basic Polytechnique < REMARKS > < / COMMENTS >
  < / DETAILS >
  < DETAIL >
  < SEGMENT_NUMBER > 50 < / SEGMENT_NUMBER >
  Logistics base Polytechnique < REMARKS > < / COMMENTS >
  < / DETAILS >
  < / DETAILS >
  < / ACCOUNT_HEADER_ACK >
  
  Here is the xml structure of the master structure and child I want to insert data in Oracle tables using the sql * loader initially tried to create a control file, but I don't know how to terminate in the control file, so I created two control files
  
  load data
  INFILE 'acct.xml' ' str ' < / DETAIL >»»
  TRUNCATE
  in the xxrp_acct_detail table
  TRAILING NULLCOLS
  (
  dummy fill finished by "< DETAIL >."
  SEGMENT_NUMBER surrounded by '< SEGMENT_NUMBER >' and ' < / SEGMENT_NUMBER >, "
  REMARKS framed by 'Of REMARKS <>' and ' < / COMMENTS >.
  )
  
  
  load data
  ACCT.XML INFILE' "str" < / header > ' "»
  TRUNCATE
  in the xxrp_acct_header table
  fields terminated by '< HEADER >.
  TRAILING NULLCOLS
  (
  dummy fill finished by "< HEADER >."
  STATUS_CODE framed by '< STATUS_CODE >' and ' < / STATUS_CODE >. "
  STATUS_REMARKS surrounded by '< STATUS_REMARKS >' and ' < / STATUS_REMARKS >.
  )
  
  I refer to the same xml file in two control files, where with regard to the first control file, I was able to load the files but the second which I suppose as table header not able to load the records of rest. I get the below error.
  
  Sheet 2: Rejected - error on the XXRP_ACCT_HEADER, column DUMMY table.
  Field in the data file exceeds the maximum length
  Sheet 3: Rejected - error on the XXRP_ACCT_HEADER, column DUMMY table.
  Field in the data file exceeds the maximum length
  
  In fact if its possible to seggrate a control file so it will be very useful for me. I'm also open for the external table as option. Please help me in this regard.
  
  Thanks in advance.
  
  Concerning
  Mr. Nagendra

  Here are two possible solutions:

  (1) reading the headers and separate details using two XMLTables:

  DECLARE
  
   acct_doc xmltype := xmltype( bfilename('TEST_DIR','acct.xml'), nls_charset_id('AL32UTF8') );
  
  BEGIN
  
   insert into xxrp_acct_details (status_code, status_remarks, segment_number, remarks)
   select x1.status_code,
          x1.status_remarks,
          x2.segment_number,
          x2.remarks
   from xmltable(
    '/ACCOUNT_HEADER_ACK/HEADER'
    passing acct_doc
    columns header_no      for ordinality,
            status_code    number        path 'STATUS_CODE',
            status_remarks varchar2(100) path 'STATUS_REMARKS'
   ) x1,
   xmltable(
    '$d/ACCOUNT_HEADER_ACK/DETAILS[$hn]/DETAIL'
    passing acct_doc as "d",
            x1.header_no as "hn"
    columns segment_number number        path 'SEGMENT_NUMBER',
            remarks        varchar2(100) path 'REMARKS'
   ) x2
   ;
  
  END;
  

  All first (alias X 1) retrieves all headers in separate lines. The HEADER_NO generated column is used to keep track of the position of the header into the document.
  Then, we join a second XMLTable (X 2), passing HEADER_NO, so that we can access the corresponding items in DETAIL.

  (2) reading with one XMLTable, but somewhat more complex XQuery:

  DECLARE
  
   acct_doc xmltype := xmltype( bfilename('TEST_DIR','acct.xml'), nls_charset_id('AL32UTF8') );
  
  BEGIN
  
   insert into xxrp_acct_details (status_code, status_remarks, segment_number, remarks)
   select x.*
   from xmltable(
    'for $i in /ACCOUNT_HEADER_ACK/HEADER
     return
      for $j in $i/following-sibling::DETAILS[1]/DETAIL
      return element r {$i, $j}'
    passing acct_doc
    columns status_code    number        path 'HEADER/STATUS_CODE',
            status_remarks varchar2(100) path 'HEADER/STATUS_REMARKS',
            segment_number number        path 'DETAIL/SEGMENT_NUMBER',
            remarks        varchar2(100) path 'DETAIL/REMARKS'
   ) x
   ;
  
  END;
  

  Here, we use an XQuery query to extract the information that we need.
  Basically it's the same logic as above, but with two nested loops which access each header, then each RETAIL location immediately after in the order of the documents.

  Here is the link to the documentation XMLTable and XQuery in Oracle:
  http://download.Oracle.com/docs/CD/B28359_01/AppDev.111/b28369/xdb_xquery.htm#CBAGCBGJ

• Using data from the control table

  Hello

  I would like to use the data entered in a table to automate volume/sequence of airflow for a test Chamber. As shown in the screenshot of control table, the first column indicates the number of iterations by elements of array in a series of tests and the second data column specifies the length of each line sequence. Entries in the other columns are specific to different valves and specify values set required in the flow meter.

  

  I guess my question is how can I index/assign each column of the table such that the data to exploit the respective valves are obtained in subsequent iterations all acquire simultaneously with data from other components in the order? While I recognize that the solution may be very simple, I searched on through various examples and messages on the tables and the tables without knocking on a solution. The attached .vi allows me to be a part of the series of tests.

  Best regards

  Callisto

  Hi Callisto,

  If I understand your question then the solution is actually quite simple. The important point to keep in min is the fact that the Table control can actually be treated as an array of string. You can then use all the traditional table manipulation tools and techniques to manipulate your data as you wish. For example, use the Array Index function to retrieve specific columns and then if you want to spend the individual elements in a column in a loop, wire the table until the loop and ensure that indexing is enabled. If you then want to use these data elements to control your test application, you can convert a portion of the resulting string in more useful to digital.

  All these concepts are illustrated in the attached VI. I hope this helps, but let me know if you have any other questions.

  Best regards

  Christian Hartshorne

  NIUK

• Remove duplicates from the oracle table using 2 columns

  Hello

  I need to remove the duplicates of an oracle table based on 2 columns in the table.i tried to remove duplicates using the join, but get the error like sql error ora-00933

  Thank you

  Hello

  Here's one way:

  DELETE FROM table_x

  WHERE ROWID NOT IN)

  SELECT MIN (ROWID)

  FROM table_x

  Col_1, col_2

  );

  I hope that answers your question.

  If this isn't the case, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements), and the results you want from this data.

  In the case of a DML operation (for example, REMOVE) the sample data should show what look like the paintings before the DML, and results will be the content of the or the tables changed after the DML.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

• SQL to retrieve data from the day before

  Hello

  I am asked to collect intelligence data and generate a daily report to determine the success rate (to do daily data that determines success rate). I have a session_time of column (with the DATE data type) that I try to do the job. I've been using:

  Select * from ABC

  where session_time > = TRUNC (SYSDATE - 2)

  Gives me data, but I get the data from 26/10/14 and 10/28/14 so when I only need data on 27-10-14 (as of the day 28/10/14). I tried a few variations and did not get the expected result. Could someone please help me understand this? Time is also displayed in my outings, maybe I shouldn't include the time?

  I use: TOAD for Oracle 11.5.1.2.

  Oracle Database 11g Enterprose 11.2.0.1.0 Edition

  Thank you in advance.

  Hello

  2632048 wrote:

  Hello

  I am asked to collect intelligence data and generate a daily report to determine the success rate (to do daily data that determines success rate). I have a session_time of column (with the DATE data type) that I try to do the job. I've been using:

  Select * from ABC

  where session_time > = TRUNC (SYSDATE - 2)

  Gives me data, but I get the data from 26/10/14 and 10/28/14 so when I only need data on 27-10-14 (as of the day 28/10/14). I tried a few variations and did not get the expected result. Could someone please help me understand this? Time is also displayed in my outings, maybe I shouldn't include the time?

  I use: TOAD for Oracle 11.5.1.2.

  Oracle Database 11g Enterprose 11.2.0.1.0 Edition

  Thank you in advance.

  Use:

  SELECT *.

  ABC

  WHERE session_time > = TRUNC (SYSDATE) - 1

  AND session_time<  trunc="">

  ;

  It's 09:15 on October 28, 2014, then TRUNC (SYSDATE - 2) is 00:00:00 October 26; The query you posted became data of October 26 and later.  (You may not all future dates in your table.)

  If it's 09:15 October 28, then TRUNC (SYSDATE) is 00:00:00 October 28 (i.e., midnight, at the beginning of October 28) and TRUNC (SYSDATE) - 1 is 00:00:00 October 27.

  Do not be tempted to use

  WHEN TRUNC (session_time) = TRUNC (SYSDATE) - 1 * INEFFECTIVE!  ***

  It will get the same results, but it is slower, you cannot use an index on session_time and requires a call to separate function for each row in the table, it is selected or not.

• move old data from the mysql table

  I have a Web page that retrieves the content in a database. The table are filled via a restricted page that was created for the data entry. I just want to know is anyway we can push the old data to another table after so long. For example if the data was created in table1 for seven days, the eighth day, I like the data that have been put on the day 1 to table2 kind that table1 will have room for the data that will be created to update 8. I would like to only 7 days worth of data in table1. Also how to remove completely from table2 data after 90 days. Also, what must you do to have the last entry in the table of row1.of

  Thank you

  keramatali wrote:

  what I need to do to display the data of the day 2 to day 7 instead of shoiwng given from day 1 to day 7

  It's a simple matter of logic. Get the last seven days is to retrieve dates that have overtaken less seven. To get days 2 to 7, you need to dates that are less than or equal to today less than 1 AND greater than or equal to 7 today.

  SELECT column1, column2, column3FROM myTableWHERE date_created <= SUBDATE(NOW(), 1) AND date_created >= SUBDATE(NOW(), 7)ORDER BY date_created DESC
  

• Retrieve data from similar columns

  With the help of Oracle 10 g, SQL Developer v1.5
  I have a table with 200 columns.
  I'm trying to get the data from all columns ending with "_DT".
  
  I got the list of columns but impossible to incorporate into the SELECT stmt.

  SELECT column_name FROM user_tab_columns
  WHERE table_name = 'XXX_STG_INST_DEBT'
  AND column_name LIKE '%_DT';

  How can this be achieved?
  
  Thank you.

  Try the following pl/sql

  serverout Set size 1000000
  declare
  ALL OTHERS INTEGER;
  ignore the number;
  cursor c is
  Select column_name
  of user_tab_columns
  where column_name like '% _DT '.
  and table_name = "XXX_STG_INST_DEBT";
  SQLSTR varchar2 (20000): = "CREATE VIEW APPOVIEW_FORUM AS SELECT ';
  Start
  for r in c loop
  sqlstr: = sqlstr. r.column_name | «, » ;
  end loop;
  sqlstr: = rtrim (sqlstr, ','). ' FROM XXX_STG_INST_DEBT';

  dbms_output.put_line ('Executing' | sqlstr);

  CURSOR_NAME: = DBMS_SQL. OPEN_CURSOR;
  DBMS_SQL. PARSE (all other cases, SQLSTR, DBMS_SQL.native);
  ignore: = DBMS_SQL. EXECUTE (CURSOR_NAME);
  DBMS_SQL. CLOSE_CURSOR (CURSOR_NAME);
  end;
  /

  Select * from appoview_forum;

  Drop view appoview_forum;

  Max