Retrieve Image

Similar Questions

• Best method for photo ID for the portfolio & how to retrieve images of portfolio as a group?

  Hello!

  I'm embarrassed to say that after all these years I manually choose my portfolio of images in Lightroom and know that there is a much easier way.  What is the best way to mark the portfolio images and then retrieve them as a group?  I can't use the star ratings that I use these for internal sorting on employment.

  Keywords would be the best way to go, i.e. Enter 'portfolio' or 'the portrait portfolio' for selected images?

  How would you then access the entire catalog and search on these terms?

  Thank you so much everyone and the best, Teri

  You can use keywords, color labels, choose the flags, or any searchable metadata field. There is no 'best '. They all work.

  Click on all the pictures and then the filter or smart collections bar will allow you to do research and create the portfolio.

• Windows Movie Maker-how to retrieve images from a film project finished

  Movie Maker (.wmv) file

  I have a movie I did with Movie Maker. I've lost the source (those used to create the movie) files. Is it possible to open the .wmv file and import all the images in a folder on my desktop?

  You could make screenshots in Movie Maker by using the 'take a picture '.
  option.but the resolution would be not equal to the original photos.

• retrieve images off macbook pro drive

  The macHD himself deep in his system there a recovery for the photos I could try searching manually? He y that tell what to delete off the computer as trash that it is not actually deleted on your hard drive. I check photos and iphoto not here. I had deleted the picture VIA the Recycle Bin can tell it would be permanently deleted. It has not been reformatted. Computer broke down on its on. Stop forced by the power button / stop. Can I use the recovery disk to find the pictures if so how are they that after launching the recovery disc. I don't have any backup even not used time-machine.  I deleted the picture 1-2 months ago.

  10.11.6 version OX EL Capt

  MacBook Pro 17-inch, early 2011

  If this isn't the case, Rescue 4 recovery will find the photo?

  FWIW, it's not likely that you can get it back. After 1-2 months, there is a good chance it was written above. Data Rescue 4 would require an eternal drive covers. Make the most of the recovery tools. They have a free trial, you can run to see if it can be salvaged, but you will need to buy to get it back assuming that it was still on the drive.

  Oops, not eternal external. Even if an eternal drive would be nice.

• How to insert images /retrieve?

  Hello world...
  
  
  I want to get the image of my file system on my form and insert the image into the database from oracle 10g to my form using forms 6i
  and
  I want to retrieve images from database to oracle 10 g on forms using forms 6i.
  
  If possible I want to generate a report to print the images retrieved from my form using forms 6i.
  
  
  Please kindly help me with coding detail as I am new to forms and I had to perform the above task.
  
  Thanks in advance
  
  
  
  Kind regards
  Santosh.Minupurey

  It's automatic with shapes. When you query the block to extract the information from the table, the image appears in the element of the Image with the other information. The end user can interrogate itself the block via the menu tool bar, but you can also apply a program by sending the focus to the block - Go_Block(); - and the execution of the query - execute_query;

  François

• image of the compressed string

  Hello

  Everyone.

  I have a small question. I am using the image file compression flatten to a string. When I retrieve image using unflatten to string it works, but if I first save the string in a text file and then read it and then compressed unflatten it I do not get the right image. can someone help her is growing on me.

  Kind regards

  Usman Asghar

  I can't open your VI now but I will make the bet of the experience that you have the ability to convert EOL selected when reading and writing to the file.  I usually use read and write binary files for this, but you can right click and uncheck the option convert EOL.

• How to convert the Qbytearray into image in cascades

  Hi guys,.

  How can I convert a Qbytearray in image, so that I can show to imageView.Any the code examples will be useful

  Concerning

  Rakesh Shankar.P

  Thanks for your help, I was able to retrieve image

   QImage swapped;
       qDebug()<<"data"<setImage(image);     container->add(testImage);
  

  Concerning

  Rakesh Shankar.P

• Update of ListView dummy image using images from URL http

  Hi guys...

  Please help me with this.

  I have created a ListView in QML file and filled with data received from a webservice. Since this web service provides all the images, I have to place a dummy image at this location. Then I used another method to retrieve images of the url. Now, I got the image in my CPC file. But I could not update my listview. I tried several methods. But failed.

  Here is my code snippet.

   ListView {
                  id: listView
                  objectName: "listView"
  
                  dataModel: ArrayDataModel {
                      id: myListModel
  
                  }
  
                  // Override default GroupDataModel::itemType() behaviour, which is to return item type "header"
                  listItemComponents: ListItemComponent {
                      id: listcomponent
                      // StandardListItem is a convivience component for lists with default cascades look and feel
                      StandardListItem {
                          title: ListItemData.postText
                          description: ListItemData.postDate
                          status: ListItemData.filePath
                          imageSource: "asset:///images/4.png"
                      }
  
                  }
                  layoutProperties: StackLayoutProperties {
                      spaceQuota: 1.0
                  }
                  horizontalAlignment: HorizontalAlignment.Fill
                  verticalAlignment: VerticalAlignment.Fill
  
              }
  

  In the PRC, I get my image like this.

  void PostHttp::imageFetcher(){
  const QUrl url("http:///828/828_20135312012288.png");
  if (flag1 == true) {
      get(url);
  }
  }
  void PostHttp::onImageReply(){
      QNetworkReply* reply = qobject_cast(sender());
      QString response;
      QImage img;
      QString filePathWithName = "data/img/";
      QString imageName;
  
      if (reply) {
              if (reply->error() == QNetworkReply::NoError) {
                  flag1 = false;
                  const int available = reply->bytesAvailable();
                  if (available > 0) {
                  const QByteArray buffer(reply->readAll());
                  response = QString::fromUtf8(buffer);
                  img.loadFromData(buffer);
                  img = img.scaled(40, 40, Qt::KeepAspectRatioByExpanding);
                  const QImage swappedImage = img.rgbSwapped();
                  const bb::ImageData imageData = bb::ImageData::fromPixels(
                          swappedImage.bits(), bb::PixelFormat::RGBX,
                          swappedImage.width(), swappedImage.height(),
                          swappedImage.bytesPerLine());
                  bb::utility::ImageConverter::encode(QUrl(QDir::currentPath() + "/shared/camera/img.png"), imageData, 75);
                  qDebug()<<"current path is "<
  Thanks in advance
  			 
  You can pass a QByteArray of image data coded directly to an imageView in the image property, set of QVariant::fromValue (). However, in your case you can place the uri to which you saved the image and not the bytes. Advantage: cascades puts these images in cache. If you use deterministic file names, you can avoid any networking calls or loading of images when only the populated list of point sier after be recycled.
  
  img.loadFromData(buffer);
  img = img.scaled(40, 40, Qt::KeepAspectRatioByExpanding);
  img.save(QDir::currentPath() + "/shared/camera/img.png"), 0, 75);
  
  QImage can do all this for you, without permutation of bytes.
  All you have to do is then updated the datamodel.
  		   

• How to write a text on an image data

  Hello

  I am facing a problem where I am suppose to write a particular text string, then tagg it with the ie.write of the image on the image and save it, also when retrieving images, it should show the data written to the image respectively.

  Please let me know if you have a response to my query

  Kind regards.

  You must obtain the graphics object from the bitmap to aid

  Graphics g = new Graphics (bitmap);

  Now you can paint on the bitmap to aid

  g.drawText (text, x, y);

  changes made to the graphics object are made directly to the bitmap image (since both speak to eachother)

• error recovery system, the disk image is too small

  When I go to the system retrieve image

  He said

  The drive is set as enabled in the BIOS is too small to recover the original system disk. Replace the by a larger drive and retry the restore operation.

  How can I use command prompt to resolve this problem? I can't turn on my laptop normally

  Hello

  I suggest you to contact the manufacturer of the computer for help.

  Note: Changing the BIOS / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• File Image store in BLOB column Oracle 6i form

  Hi all

  I want to save the image file into the BLOB column using oracle forms 6i. I used READ_IMAGE_FILE to retrieve image at the point of the image on the forms, but all save the image file recording is not in the type BLOB in a corresponding table column.

  Please help and guide me in this regard.

  Atif Zafar

  Here's a code example

  declare
      filename varchar2(256);
      VNAME varchar2(100);
  begin
      SELECT LIC_SERVER_NAME INTO VNAME --- DESTINATION SERVER / PC NAME START WITH "//". eXAMPLE //SERVER-NAME
      FROM PATH_TABLE;
  
      filename:=GET_FILE_NAME(File_Filter=> 'JPG Files (*.jpg)|*.jpg|');
      read_image_file(filename, '', 'CUST.TXT_VOTER_ID_CARD');
      host ('cmd /c copy "'||filename||'" "'||VNAME||'/CNG_SOFT/voter_id_card/'||'\'||:CUST.AD_CODE||'.jpg',NO_SCREEN);
  end;
  

  Hope this helps

  Hamid

• Best way to save the images streaming from the web to device?

  We have an app to browse a catalog this content of stream of a web server. There is an image for each product, some in JPG format and some in PNG format. Our server is fast and reliable, so everything worked without problems so far, but we would like to give users the ability to save data on their device, so they don't have to listen to every time. I've only worked with before SharedObjects, which are capped at 100kb and will not help in this situation.

  What would be the best approach for storage of images and keeping them is crushed in the updates? Save an uncompressed Bitmap uses too much storage space. Adobe's JPEGEncoder class is completely useless because it takes 10 to 30 seconds to save an image of medium size on a typical device. Also, he does not sense of re - encode jpg files, and we must preserve transparency in png.

  At the moment we are using a loader to retrieve images and using loader.content to access the image data in the code. Is it possible to save the image file in its original local format when downloaded with a charger? We would like the images stored in the application data and not available through the gallery. With regard to the registration of the data for each product (price, description, etc.), the built-in SQLite support would be enough or should we create our own files?

  Thanks for the tips!

  Ah, I got it. Existing files are checked as indicated cmholden. If the image is not stored locally, we use URLStream to load the image file on the web. We can then save the file directly via the ByteArray to the URLStream and then use our code existing loader to load the ByteArray even as a DisplayObject. I was worried there would be some downturn app to save the files, but the change in performance is negligible and of course once the images are saved on the device they charge a lot more quickly the next time the application is run!

• Images JPG, stored in DB, are not displayed on the screen/image.

  Hi friends,
  
  I have a form to save and retrieve images (JPG, GIF, TIF) to and from the DB, using WEBUTIL_FILE_TRANSFER. CLIENT_TO_DB and CLIENT_IMAGE. WRITE_IMAGE_FILE respectively.
  It works fine, but with few JPG images, it stores in DB, but not displayed on the screen/image.
  Second, if I try to retrieve and write the JPG to the operating system (using CLIENT_IMAGE. "" WRITE_IMAGE_FILE), he invited error "FRM-47101: cannot write the file image.
  
  Environment:
  Forms [32 bit] Version 10.1.2.0.2
  Operating system XP Pro 2002 SP3
  Oracle DB 11 g Enterprise Edition rel. 11.1.0.7.0 - 64 bit
  
  Any help will be much appreciated.

  Hello

  Some recent JPEG formats are not supported by the forms. I can't tell you exactly what, but I have already noticed that some images could be made only by the forms. The only solution is to save the images with another program to transform the internal format to a recognize an or use a Java Bean able to read all of these formats.

  François

• Extract images from pdf

  I am trying to extract images from a PDF file using the pdfimages, but I'm unable to retrieve images. By opening the PDF files using Acrobat Reader 9.0, I am able to select these images retrieved by pdfimages, using the selection tool, but other figures/images we must try other options like the screenshot and then cut the relevant image. I was wondering why or when only the Acrobat treats differently the figures/images.

  'Images' in PDF format are bitmap images, such as JPEG or TIFF, placed on a page. A PDF file can also contain a "graphics" (such as EPS files or HAVE) which are vector shapes and are therefore not exported with the rest of the images.

• image of BLOB in local directory

  Hello
  
  I want to retrieve image BLOB stored in DB to tell local directory D:/dir folder.
  
  I've seen procedures that use UTL_FILE to do the same. but that I do not properly understand. I am getting following error. so, anyone can guide what exactly is the directory in this procedure? I assumed that where I want to transfer my images from blob.
  
  ORA-29280: invalid directory path
  ORA-06512: at "SYS." UTL_FILE", line 33
  ORA-06512: at "SYS." UTL_FILE", line 436
  ORA-06512: at the 'DBF '. GET_BLOB', line 16
  ORA-06512: at line 2
  
  I use oracle 10g.

  You must use an Oracle Directory object with UTL_FILE.

  CREATE OR REPLACE DIRECTORY temp_dir AS 'D:\temp_dir';
  GRANT READ, WRITE ON DIRECTORY temp_dir TO ;