Return file names numerically

Similar Questions

• I can't install WSE 3.0 on my Windows XP with SP3, it will always return "error 1325" Administrator is not a valid short file name.

  Here's the Setup log:

  = Logging started: 24/02/2012-15:36:55 =.
  Action 15:36:55: INSTALL.
  Action start at 15:36:55: INSTALL.
  Action 15:36:55: ProgramFilesFolder.3643236F_FC70_11D3_A536_0090278A1BB8.
  Action start at 15:36:55: ProgramFilesFolder.3643236F_FC70_11D3_A536_0090278A1BB8.
  Action ended 15:36:55: ProgramFilesFolder.3643236F_FC70_11D3_A536_0090278A1BB8. Returns the value 1.
  Action 15:36:55: CommonFilesFolder.3643236F_FC70_11D3_A536_0090278A1BB8.
  Action start at 15:36:55: CommonFilesFolder.3643236F_FC70_11D3_A536_0090278A1BB8.
  Action ended 15:36:55: CommonFilesFolder.3643236F_FC70_11D3_A536_0090278A1BB8. Returns the value 1.
  Action 15:36:55: ISSetAllUsers.
  Action start at 15:36:55: ISSetAllUsers.
  1: InstallShield - ISSetAllUsers (Begin)
  1: opening database
  1: {B4BB35AA-51EC-41A5-9C85-90D6FA98968C} 3.0.5305.0 3
  1: {B4BB35AA-51EC-41A5-9C85-90D6FA98968C} 3.0.5305.0 3
  1: {DE6ECF6D-2979-4137-8B56-0339497275B6} 3.0.5305.0 3
  1: {DE6ECF6D-2979-4137-8B56-0339497275B6} 3.0.5305.0 3
  1: closing database
  1: InstallShield - ISSetAllUsers (end)
  Action ended 15:36:55: ISSetAllUsers. Returns the value 1.
  Action 15:36:55: AppSearch. Searching for installed applications
  Action start at 15:36:55: AppSearch.
  Action ended 15:36:55: AppSearch. Returns the value 1.
  Action 15:36:55: LaunchConditions. Assessment of launch conditions
  Action start at 15:36:55: LaunchConditions.
  Action ended 15:36:55: LaunchConditions. Returns the value 1.
  Action 15:36:55: SetupInitialization.
  Action start at 15:36:55: SetupInitialization.
  Info 2898.For Tahoma8 textstyle, the system has created a font "Tahoma", 0 game characters, 13 pixels high.
  Info 2898.For TahomaBold10 textstyle, the system has created a font "Tahoma", 0 game characters, size of 16 pixels.
  Action 15:36:55: SetupInitialization. Dialog created
  Action ended 15:36:55: SetupInitialization. Returns the value 1.
  Action 15:36:55: FindRelatedProducts. Searching for related applications
  Action start at 15:36:55: FindRelatedProducts.
  Action ended 15:36:55: FindRelatedProducts. Returns the value 1.
  Action 15:36:55: ValidateProductID.
  Action start at 15:36:55: ValidateProductID.
  Action ended 15:36:55: ValidateProductID. Returns the value 1.
  Action 15:36:55: CostInitialize. Space requirements calculation
  Action start at 15:36:55: CostInitialize.
  Action ended 15:36:55: CostInitialize. Returns the value 1.
  Action 15:36:55: FileCost. Space requirements calculation
  Action start at 15:36:55: FileCost.
  Action ended 15:36:55: FileCost. Returns the value 1.
  Action 15:36:55: IsolateComponents.
  Action start at 15:36:55: IsolateComponents.
  Action ended 15:36:55: IsolateComponents. Returns the value 1.
  Action 15:36:55: ResolveSource.
  Action start at 15:36:55: ResolveSource.
  Action ended 15:36:55: ResolveSource. Returns the value 1.
  Action 15:36:55: CostFinalize. Space requirements calculation
  Action start at 15:36:55: CostFinalize.
  DEBUG: Error 2835: the ErrorIcon control was not found in the SetupError dialog box
  Internal error 2835. ErrorIcon, SetupError
  Error 1325. Administrator is not a valid short file name.
  MSI (c) (C A0:6) [15:36:57:389]: product: Microsoft WSE 3.0 - error 1325. Administrator is not a valid short file name.

  Action ended 15:36:57: CostFinalize. Return value 3.
  Action 15:36:57: SetupCompleteError.
  Action start at 15:36:57: SetupCompleteError.
  Action 15:36:57: SetupCompleteError. Dialog created
  Action ended 15:36:58: SetupCompleteError. Returns a value of 2.
  Action ended 15:36:58: INSTALL. Return value 3.
  = Logging stopped: 24/02/2012-15:36:58 =.
  MSI (c) (C A0:6) [15:36:58:201]: Windows Installer installed the product. Product name: Microsoft WSE 3.0. Product version: 3.0.5305.0. Product language: 1033. Installation success or error status: 1603.

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.

  http://social.msdn.Microsoft.com/forums/en-us/VSX/threads

  Also use a file name that matches the specification of file name of 8 point 3 for short file names.

• RESEARCH ASSISTANT intermittently returns lowercase FILE names

  When I use the wizard looks very intermittently, FILE names are all returned in LOWERCASE.  The problem with this is that if I open a file from there and then save it.  The file name is converted into tiny all.  I use Windows XP Professional and DID install Windows Search.  So, to access the Research Assistant, I have to click on the link at the bottom left of the Windows search page.
  I've scoured the Internet, but no reference to anyone else having this problem.

  Hello TrudyWalter,

  First thing to try would be to rebuild your search index. You can do this:

  ·         Click Start

  ·         Click on Control Panel

  ·         Open Indexing Options

  ·         Click on Advanced

  ·         Click rebuild

  ·         Click OK

  ·         Click on close

  You will see a magnifying glass in the task bar that will let you know when it has finished indexing.

  If, after the index rebuild you still has the problem, you can try the Windows Search uninstall and then re-install. This can be done:

  ·         Click Start

  ·         Click run

  ·         Type appwiz.cpl

  ·         Click OK

  ·         Click change or remove programs

  ·         Click the Show updates box

  ·         Click the Windows Search 4.0

  ·         Click Remove

  To reinstall, follow this link to download Windows Search 4.0:

  http://www.Microsoft.com/Windows/products/winfamily/desktopsearch/choose/windowssearch4.mspx?tab=install%20It

  Hope that helps, I look forward to hearing from you.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Adding keywords to a subject causes the search return the names of file instead of topic titles

  When I search for a term in my WebHelp Pro project, matching topics are displayed by filename if the subject has anything in its properties > General > keywords field, and are presented by topic title if there is no defined keywords for the subject.

  I confirmed this behavior by adding and deleting keywords from subjects and looking alternately to be shown in the search by file name or title of the topic.

  Obviously, I want stories to be displayed by topic titles in search results no matter whether they have keywords assigned or not.

  Any idea of what this could be the cause? Is this a known bug?

  Here is some additional information. This problem occurs, these four conditions must be met:

  1. The subject must have manually added keywords in properties > general > keywords field.
  2. The title of the topic and the name of the file must be different.
  3. We have to search among keywords added in step 1.
  4. Occurs in WebHelp Pro when published to a remote server.

  Interviews with Adobe today are not conclusive, but it seems that it was an unknown bug. Maybe I'll get a free t-shirt or something.

  Hi Rocky,

  Journal on Robohelp Configuration Manager.

  Uncheck the option "re-indexing of documents to the server.

  Republish and check. If the problem exists, try to restart the Apache/Tomcat server.

  This should work for you.

  Kind regards

  Robbie

• It is not possible to delete files with characters draw in file names.

  If you copy this file name:

  MyPrefs␀␀

  And paste as the name of a file on your computer to El Capitan you not be able to remove it.

  If your computer cannot start in an earlier version of Mac OS X the only option I found was to format the drive and reinstall from upward (without restoring the file of course)

  If you're like me and have more than 10 TB of data, this can be something of a pain in the anus.

  For now, I resorted to a file of copies of each disc in the trash, move the offending in its respective folder file and returning the file via this folder to his house by car. I then turn the invisible folder so I don't have to deal with errors of garbage every time I remove a file.

  Until any of you tell me to use a terminal command, boot from a USB key, or use the restore mode. Try it yourself and failure.

  I put a little effort in an installation of linux thumbdrive I read on, but could not find one that was compatible with the new processor of skylake, but it worked fine on my old mac pro

  This was not the case in previous versions of the operating system.

  Non-alphabetic and non-numeric symbols are not recommend for naming files.

  https://support.Apple.com/en-us/HT202808

  Why would you use?

• File names image missing from the underside of the Photo Image

  I recently spoke with someone from Apple support and they confirmed that displaying the name of the file Image is a present feature in iPhoto, but was lost in the update photograph.  Their suggestion was to send feedback to Apple.  He said that it is the most effective way to get results and more of us than that best the chance we have to see this feature in a future update of photography.  It was my return to Apple:

  "Thank you for the update photograph... I appreciate some of the improved features that have been made for him. However, I would like to note that the absence of the names of files that appears under the image is cruelly.  I find this information very useful as I get pictures from other sources and helps determine the ownership of the photos.  Now, I'm a little lost without her.

  While the screen may look sharper and more user friendly for some, it would be good to know that this feature could be made available View (display Image File Name) option.

  Could I do that as a suggestion for your next release? »

  If you are also missing this feature, I encourage you to submit your comments to http://www.apple.com/feedback/photos.html

  iPhoto has used the names of files as a default title to be displayed as thumbnails, if no title has been assigned. Photo for Mac displays only the titles under the thumbnails, if a title had been awarded. He makes a distinction between a title assigned user and a file name.

  As a workaround: in the tip section the user to change the title of a photo file name - have a look, we have posted a few Scripts from Apple:

  • Script: Change the title filename without Extension
  • Script: Batch change the titles to the w/Extension

  Photos will show the title under the thumbnails if you select the titles in the menu: view > metadata.

  An alternative workaround: you get pictures of the power.  It allows you to browse your photo library with fields of metadata under the thumbnails - keywords, titles, names of files. You can customize what you want to see in the title or subtitle.

  But I support the request for better support of metadata in the pictures.  The feedback form is here: Feedback - Photos - Apple

• 5.6.1 pages how to insert a file name

  In previous versions of Pages I could insert the file name or the full path of a document in the foot. I create multiple documents for our society. This has been invaluable when changes had to be made to a document or form. I can't find this option in Pages 5.6.1. Where at - it go? How can I insert a file name?

  Pages v5 (all versions) has been a complete rewrite - no no from the Pages ' 09. Insert menu: file name was never added to the application. There is no provision in the application of v5 Pages to insert the entire path either.

  If you click on the document name in the title bar, a Panel opens with the file name have been screened, and paste that in your footer. He was never a capacity in Pages ' 09 to insert a path of the document.

  The following AppleScript will display a POSIX path for the currently open document in Pages. It will support installation of Pages three different scenarios:

  1. V5 installed only with the open document pages
  2. Pages ' 09 installed only with the open document
  3. V5 pages and Pages ' 09 installed and running with open document

  Launch the Script Editor (Launchpad: others: Script Editor). Copy and paste the AppleScript in Script Editor. All text will be purple (normal). Click on the hammer icon to compile. Now the text is mixed of colors (good). Two successive stops:

  1. File menu: Save... File name: Pages_path. When you select the text in the File Format: selector, applescript is added file name. No other check boxes, and then save in your Documents folder. It is the only source.
  2. File menu: Option key: Save under... Pages_path. Since the File Format: selector, select Application. A .app extension will be added file name. Click on the box to hide the Extension. Save to your desktop. This is the clickable application.
  3. When you want the complete path of the open document, you click on the Pages_path icon on your desktop and a dialog box is displayed. Select, copy and paste this path into your Pages document.

  -Pages_path - display the full path of the current document

  -path can be copied and pasted into the dialog box in the document

  -Manages three scenarios

  (1) pages v5 only

  (--2) pages ' 09 only

  (--3) pages ' 09 and v5 both installed, but a race

  game of p9 to ((path to the applications folder) as text) & ' iWork ' 09: "&" Pages.app: "

  if (version of application 'Pages') is superior to "4.3" then

  -All Pages v5 release open with document

  say application 'Pages' to the value document_path to POSIX path of ((front file) document in the text)

  else if there are (p9) then

  -Pages ' 09 open with the document

  say my front document to set document_path to path it request p9

  on the other

  -OS X App Store Pages ' 09 only installed

  say application 'Pages' to the value document_path in front of path

  end if

  display the dialog box "Path of current document" & return & document_path as text

  return

• How do you search a file name with parenthesis in there?

  Received a ton of files with duplicates, I need to delete.

  All the duplicate files end with '(1)' in the file name, for example: FilenameTest (1) .pdf

  I would like to find all files with '(1)' in the name of the file and then delete them, but spotlight search no parenthesis. This seems to be a documented problem (bug?). Is there a syntax or other workaround to force the spotlight to return a search with the bracket?

  Thanks in advance.

  The Finder, choose utilities go to menu, open the Script Editor and run the following exactly as shown:

  Tell application "Finder".

  Remove (each point of (choose folder) whose name contains '(1)')

  tell the end

  (138281)

• Error on startup: "application (the file name is) is not a valid windows image, check against your installation diskette."

  computer startup happens on the screen with "application (the file name is) is not a valid windows image, check against your installation diskette." It can be any name of a file that appears, if I click ok it will.  Anyone know what I should do now. Thank you

  Hi LorraineMatthews,

  ·         Did you do changes on the computer before the show?

  ·         What is the exact error message?

  ·         Are you able to boot to the desktop?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• When I open my pictures folder I can't image, what I see is a generic file name... Y at - it an option that I can use if I can see my photos without having to open it? __

  There is none

  When I go to the images and select views and select Extra Large icons, I can see the images above the file name.  Frankly, I don't know how to avoid having the picture show, even though I never wanted that.  He has no control, I know to show representations of just generic file or show pictures showing images being the default value.  Maybe something is happening with your system.  If this does not work, after return and we will try to solve the problem.

  Good luck! ICCC Lorien - One - MCSE/MCSA/network + / A +.

• The file names changed in wingdings, including the file extension and I can't delete, change them, open, etc. Here are the pictures.

  Have (had) a file with multiple files it contains with pictures in each file.  A week ago the pictures were there.  Now, the names are replaced by wingdings as names and file extensions.  When I try to open it, it is not accessible and that the file name, directory name or volume label syntax is incorrect.  When I try to delete it, it says that the file name you specified is invalid or too long and specify a different name.  When I try to rename it, it tells me that if I change the file name extension, the file may become unusable.  If I try to change anyway, it says I've specified file name is not valid or too long.  Only tried for the name 1.  I did a restore in the case where a program interfered with that.  However, nothing has changed.  All of the suggestions.

  You can download and try to delete the file Unlocker http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtmlwilh.  Although it is not designed for this particular circumstance, it may very well work in all cases, as it has been very successful in a wide variety of situations are not specifically highlighted in the directions (where do not work the normal Vista options).  NOTE: Some antivirus flag programs this program as a malware, but it is a 'false positive' and is safe to use perferctly.  My own software to flag, but several other well-known software products it clean and the warning is included in the documentation of the program.

  I wish there was a way to save the images, but at this point, it seems that the only option is to delete because you can't rename files EHF (if this option is available-I hope that work above).  Unfortunately, System Restore does not affect the files of data, so even if a program caused this, System Restore can eliminate the cause, but it would not restore the files to their previous names.

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky because they retain the files called snapshots http://windows.microsoft.com/en-AU/windows-vista/Previous-versions-of-files-frequently-asked-questions.  It can be used to recover previous versions of files that have been changed or deleted accidentally.  Here's how: http://www.microsoft.com/windows/windows-vista/features/shadow-copy.aspx.

  If you have Vista Basic or Premium of Vista, you don't have a shadow, but there is a free program for you that does essentially the same thing called Shadow Explorer: http://www.shadowexplorer.com/.  I suggest that you download and implement as soon as POSSIBLE to protect you if you accidentally delete or modify a file.  It will not help you in this instance, but it can help save the next time.

  I'm more concerned about why this has happened in the first place and prevent it from happening again.  I saw file names change before, but never of wingdings which then do not let you open, edit, delete, or rename.  We will check some of your system files: go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  If you find any these corrupted files, try to post them here.  Maybe we can replace the good files on the disc.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer about the name change (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work - but it will probably not fix your renamed files.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Hosts the naming - how to use VMware name instead of file name

  Please see attached file.

  All hosts based on the same models appear under the same name in hosts. Is it possible to configure vFoglight to extract the vCenter appoint to the host instead of using the file name of the VMware disk for guests of actual spending?

  You are looking in the wrong place in the object model.

  Machine virtual VMWare is an extension of the host object model.  Think of the host as the base model by the dealer and the virtual machine as the base model with all the bells and whistles added to make a street racer.

  If you enter a virtual machine name in the top search bar, you will see that the returned results include objects of different types, probably a Machine virtual VMWare and a host.  Select the virtual machine VMWare will take you to the model object VMWare-specific screens.  Similar results for HyperV, etc..

  There is always a host record for each virtual machine, just as each car factory has the model of base somewhere.  He just won't have all the bells and whistles.

  Looking at your attachment, I think that what you see on the dashboard can be what you see in Virtual Center.  Virtual machines have a name that appears on the list of the Virtual Center, which can be separated from the real name assigned to the VM inside the operating system.  If you fix the naming in VC, I think you will find that the correction automatically flows to vFoglight.

• installation of the software gives an error 1320, too long file name

  During the installation of the CAD of DraftSight software on a system running Windows 7 Prof I get an error message 1320, too long file name and the software cannot be installed.  A work around DraftSight suggested to rename the data folder C:\ProgramData\Application, DraftSight installation and then restore the original name of the file.  A second workaround was to delete the folder, install the program and then restore the folder.  A third workarounds solution had to drag or copy and paste the Application Data folder on the desktop, install the software and then return the ProgramData folder in the directory.

  For Windows 7 teacher the problem with alternatives a & is the shortcut to the application data to other programs is lost when the name or the file is restored, leaving only an Application Data folder and delete the shortcut.  The problem with the three workaround is that the shortcut cannot be dragged or cut and paste on the desktop.

  How can I temporarily allow the program to install and create a folder of Application data in the ProgramData directory and then move the program information in the folder the shortcut pointing to?

  I would also like to know how to get the same result with Windows Home Premium where the Application data file is not a shortcut, but is actually a locked folder.  I would need to enter the locked folder information on the program.  Some users of DraftSight say the two alternatives have worked for them and I suspect that they may work for Windows 7 Home Premium, but the impact on other programs may not be obvious.

  When you try to install the program?

  Assuming that you have the ability to choose where to install the program, you can try to shorten the location.
  For example, you can try to install to C:\Program Files\Draftsight\ or if necessary C:\Draftsight

  If this does not work, there is nothing that we will be able to suggest other than to contact the developer again. Change the ProgramData folder should not affect this type of problem and the only thing that is likely to affect the writing on the application folder data would be the length of your username, but even then I would feel that the application is something wrong in this case.

• Maximum file name length class in jde/preverify.exe?

  I have a little problem. Or, actually, it's a problem of long.
  I use a Web service, so I have no influence on the file names.
  I am in no way responsible for things that are returned by the Web service (or I would probably have turned myself already).
  The generated classes have many internal classes that are nested in eachother.

  the names of the two generated classes class files appear to be too long, here is the error message from one of them:

  Error loading class com.sap.xi.appl.global2.TradeReceivablesPayablesAccountERPSplitItemGroupByCustomerIDResponseMessage_sync$TradeReceivablesPayablesAccount$TradeReceivablesPayablesRegisterItem$TradeReceivablesPayablesRegisterItemSplitItem
  Error! : error: auditor failed: C:\Programme\Research In Motion\BlackBerry JDE 4.2.1\bin\preverify.exe d C:\DOKUME~1\sha\LOKALE~1\Te...

  other versions of jde (4.3, 4.5, 4.6) had the same error.

  any way around this?

  There is a maximum size for the file name + path in Windows, which you can be struck.  I tried to create a sample with this and Windows wouldn't let me do anything with the file, which gives an error "the file name or extension is too long."

  Move the project closer to the root solved the problem for me and allowed me to build the application.

• Oracle WebLogic Server 11 g 1 material (10.3.6) the file name is different in the site and while his error getting buildstage

  Hi all

  I downloaded Oracle EBS https://edelivery.oracle.com/EPD/ 12.2.0 and selected for "outsourced manufacturing and Oracle for discrete Industries R12.2 V5 (12.2.3) v1, Linux x 86-64" on the page

  downloaded the files required for the staging area, in the Linux x86_64 gave error for "file name V29856 - 01.zip Oracle WebLogic Server 11 GR 1 material (10.3.6) Generic and coherence but on oracle delivery page, I can only find Oracle WebLogic Server 11 GR 1 material (10.3.6) and coherence for the file name of Linux x 86" : V29851 - 01.zip which is already uploaded on the stage space, how can I find the file in the site or should I rename to V29856 - 01.zip you please help me on this problem.

  Thank you

  JAI Srinivas.

  Srinivas,

  I think I got an idea after reading it several times

  This is what I understood

  checksum is a failure, so you use version 12.2 Overview disk file (1320300.1) to find which zip file must be downloaded. The overview shows V29856 - 01.zip downloaded but delivery file only has V29851 - 01 V29856 - 01.zip instead.

  I remember something like downloaded this sometimes return that I did checksum digest view used to check the integrity of files and went ahead with the buildstage.sh script to build the stadium. I have been able to complete installation without problems.

  You could try the same thing or try to rename as you suggest.

  I also recommend to contact support so that you will be clear and they will get to know.

  Concerning

  SANAE