Return to the condition of the factory of Windows 7
Hello
I often met problem graphic driver on my newly installed Windows 7 64-bit professional tx2500 so I decided to go back to Vista.
My Windows 7 was a pure installed rather than upgrade to Vista, and therefore no recovery manager has installed. Restart I press "F11" and noticed to the lower left of the screen, the line 'recovery manager' briefly appeared but soon transformed in Windows logon screen.
In order to install the Recovery Manager, I downloaded and ran the following three files:
HP Recovery Manager for Microsoft Windows 7, 2.79 MB
HP Recovery Manager install, 682,02 K
Recovery Manager for Windows 7, 6,64 MB
But none of the files can be installed successfully.
What happens here prevents their installation? HP plans actually Manager recovery in 64-bit version of Windows 7? How can I return to my factory condition of Home Premium 64 - bit Windows Vista?
Thank you
Bob
HP provides a Recovery Manager Patch for installations of W7, but it works only on upgrades installed not clean. You will probably need to call HP to order a recovery set. Usually around $20.
An option that works by many (not all) puts the active recovery partition >
1.right - click on the "Computer" icon and select manage.
2. This will launch the Microsoft Management Console.
3. on the left side of the MMC console, click "Disk management" and it will show you all the partitions.
4. right - click on the "HP Recovery" partition and select "Mark as Partition Active."
5. when the warning message appears, select 'Yes' – Reboot and it will automatically start in the Recovery Manager (without pressing F11).
Tags: Notebooks
Similar Questions
-
Satellite C660-1LD: how to recover and return to the factory settings
Hi guys,.
I suffer with any problem on any website a few linked words and when I click on it, an ad. opening of site Web which is a little virus I think and the laptop runs very slowly
I decided to restart the laptop of the t and return to the factory settings.
Could you please help me how to restart I'm not really good with computers so if you explain step by step it would be fantastic.
Thank you
Hello
Read the discussions here in the forum of Toshiba product recovery.
In addition, check this documentation how to use HARD drive recovery:+ How to recover a Toshiba notebook with the HDD recovery procedure.
http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm -
my computer has been hacked and I spent all day remove these viruses without success, so I was forced to return to the factory restore. I am up and running again, but need to re - download my adobe cc to my computer. I did not have permission to do so apparently without having to open a new account. does anyone else have this problem? How did you download your adobe cc without opening another account?
Lorimarierose for more information on how to reinstall the Adobe Creative applications included with your subscription please see CC help | Install, update, or uninstall applications.
-
Does anyone know how to return to the standard interface Windows photoshop 2015 &; Surface
Does anyone know how to return to the standard interface Windows photoshop 2015 & Surface
Adobe has a bug in the new UI Scaling preference: Auto by default. If will scale Photoshop User Interface on the screens that will not work 2 x the scaling of the UI on the scale adapts not on display. You must change this default auto at 100%. It looks also not you must rest your workspace to get the palette of tools to a column.
-
Aspire V3-771 Wireless Windows 7 Ultimate edition will not return to the factory settings
Hello everyone,
so I'm having to V3-771-6601 laptop which I bought in the US 2 years ago. I have some kind of virus which was activated immediately after the sign in. Some photos of Interpol appears and they wanted to charge a fraud or something like that. I tried to press CTRL + ALT + DEL to task mngr, but the virus won't let me. So I entered in safe mode and saved all my valuable information. The laptop has windows 7 Home Edition. I decided to install W7 Ultimate RTM. So when I was doing that, I formatted ALL partitions that I saw on the screen. After that i have PXE boot problem. I realized that I need to connect my lan cable. Ok. After that the computer does not start, it shows just acer splash screen and immediately restarts again and again and again. I tried to click ALT + F10. At the bottom left, I saw "switch to erecovery" or something like that. After pressing alt + f10 there is a '_' in the upper left corner, and the Frank is frozen. So I can't even boot to see victory logo, even I can't return my phone to factory settings. Just to note I have no CD with my PC, only the power chords and that's all. The House of win 7 was already languages. Please guys help me how to fix my laptop.
Best regardsWell, you could have done your own recovery discs when you bought your PC!
I agree that it is a shame that you can't get a copy of the disks where you live!
If you are happy to have a cracked version of Windows, it is to you. Even if you can open a Pandora's box, we'll agree disagree on the question
As for the problem of button, it could be a sign of a faulty keyboard or it could be a software problem. A few copies of cracking are so changed, it could be an error in the code!
You can try and run a Linux live disk to see if it happens there. If so, then the keyboard will be replaced.
-
Everything that I read to do a reset of the region indicates that this is done by phone.
I called HP to the Japan and told that I need to return the printer to the factory (for 2 weeks) so that they can do the procedure.
Is this correct?
Edit: This is a HP Envy 100 printer (D410)
Hi kwkw,.
In general, this is done by phone. I check to see if there is something different about this printer and I raised your message to the appropriate review team. Someone needs to contact you by private message in these forums. Private messages can be checked by logging in and clicking on the icon of the envelope at the top of the page.
-
Qosmio F60 trying to return to the factory settings
Hi all
I recently purchased a Qosmio F60. When I started it upward and the preload Windows 7 has started to install, I clicked on the option for 64-bit. A few days later, after the installation of a few other programs I noticed in configuration/system board that windows was reported as 32-bit. (Yes, I'm sure that I chose 64-bit). He noted also that 4gig ram withonly 2.98 usable.
First of all, can someone explain why this could be?
I had not created a recovery disk because I planned to load the machine with all the programs that I use regularly and THEN create the recovery disk and image. However now that I see that windows is apparently loaded as 32 bits I want to return to the beginning and reload the windows preinstalled as 64-bit. I really need it to make full use of the suite cs4 Adobe. And I'm confused as to why only three-quarters of my ram is usable.
I backed up the data (a little), I've created so far and the TOSAPINS file and put it on a USB key. What is the best way to restore it to how it was when I got it out of the box? It came with preloaded trial of Office 2007, and Norton, versions.
If I go back to the system default Toshiba Restore Point will it take me back to where I re - load Windows? Or is it just restore point after installing windows?
Thanks in advance
ufoundlou
Hello
Can you please tell us what F60 (F60 - xxx) have you exactly.
It is really strange that you have it with 32-bit because I know with certainty that this machine comes with 64-bit only.To be honest, there is no sense to install 32-bit on such portable high-end with excellent material. Please try to install the recovery image using HARD drive recovery procedure. Procedure is described on http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
Please note:
When you want to create the recovery DVD you will get recovery on that image if all applications that you will install in addition will appear not in this recovery image. -
Computer is returned to the factory settings. Can I still recover my photos?
Original title; My computer does not function properly for months, 8, he had my go back to the original Setup and I lost my photos. How to recover my photos or go back to my old settings before the 8th?
I lost all my settings since the January 8. My photos are gone, my favorites have disappeared and all the sites I frequent.
Hello
· What version of the Windows operating system do you use?
Click on the link below.
· How did perform a restore factory on your computer?
· Who is the manufacturer of your computer?
Note:
If you had done a factory restore using recovery discs system provided by the manufacturer of the computer or by using the recovery on your computer partition. You will not be able to recover user files and folders on your computer. Perform the restore factory on a computer will format the entire hard drive and re - install a new copy of Windows. This process is not reversible except as the system restore.
Difference between restoring the system and restore the factory:
System Restore is a Windows system restore. It resets Windows and a majority of programmes to registered previous States, defeating all updates, new facilities and changes to settings that have happened after the restore point has been set. It is not, however, recover deleted data files or get rid of the infection. Your data will not be affected by the Windows system restore.
System of recovery or factory restore , this is generally what the constructor calls their built-in tool to reset the entire computer to factory default. If your computer came with restore or recovery disks, then they do the same thing. All data on the system wiped and only what came on the system initially is reinstalled, with the kind permission of the recovery disks. All your data, added programs and ideally viral infections are removed, and the system is as if it was when you bought
You can use any third-party data recovery software and check if you can retrieve lost data or images of your hard drive.
Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Provide us additional information, as appropriate. So that we can help solve you the problem on your computer.
Hope this information helps you.
-
Satellite L650 - 12K - restore the factory with Windows password settings?
Hello
Today I received my new Toshiba Satellite L650 - 12K. I went through the process of "first use" and put in place my name of user and password Windows 7 etc.
However, after a reboot, when I tried to enter my password to connect to Windows, it says it is incorrect. I tried different combinations of password I used (I know what it's like I wrote it down at the time)-ive tried caps, plugs etc but nothing works.
If I order the Toshiba recovery disks I will be able to return the laptop to factory settings and start the installation again, including Windows?.
PS - I only put an account so can't even connect you as another user.
Thanks for your time and your help.
Gary2802.
Hey Buddy,
Yes, the Toshiba recovery disc can restore the initial configuration (on the box settings) even you don t know the password because it will remove the whole HARD disk and restore the version preinstalled Windows from Toshiba.
So don t you worry about this, Toshiba Recovery disk will help you! ;)
-
Closing PDF and return to the folder in Windows 8
In my work, I often have a folder full of PDFs I open one, read it again, close it and proceed to the following. Before, I just clicked once to close the document and I was still in my file. Now it takes me five clicks to get the closed document and return to the folder. All the world has discovered an effective way to do this?
Oh it's a miracle - thanks Adobe Acrobat the default program for opening a PDF instead of Adobe Reader, I can close documents with the little X and am back on the desktop with the file. It is very good.
-
How can I get my vista reset and return to the factory settings?
How can I get my vista back to factory settings
Hello
Here are the different ways to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
____________________________________________________________
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
__________________________________________________________
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
____________________________________________________________
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
So, I upgraded from CS6 CC and I loaded a previous CS6 project which then in turn loaded my previous layout of the workspace. Now the quick menu disappears at the top when I'm in edit mode. No idea how to reset it to factory settings? the use of workspace > reset to saved the layout seems to be the only option that obviously doesn't work.
Hi Karen,.
- Go to Documents/Adobe/Premiere Pro/9.0/Profile
- Restart Premiere Pro
- It should be default layout
NOTE: You will lose all your layouts custom
Thank you
Regalo
- Go to Documents/Adobe/Premiere Pro/9.0/Profile
-
How to return to the factory settings obtained so much waste on my laptop I want to start
Have a lot of garbage on my laptop is so slow, but I have Virgin broadband, so I want to erase everything and start over.
Hello
There are several methods to reinstall Vista.
There is no Windows Vista downloads available from Microsoft.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.
Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.
If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Little boxes next to photos appearing not since I returned to the factory settings?
Recently I had to wipe my computer because of virus and slow speed. I did all of this successfully without any problem but since ive done it the small check box next the photos to select them individually is no longer there. What makes a huge pain to download my photos online. Is there any solution to this?
Thank you in advance.Start button > in the search box, type Folders options > view tab > files and folders section, scroll down and check the box in front of "use checkboxes to select items" > OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
How can I return to the old preferences window? I don't like the new tab.
I used to be able to click: Firefox-> Preferences and get the window preferably. Firefox Preferences now opens as a tab. I don't know how or why it changed. But I don't like. How can I go back to the old way to open the preference window?
Hi, I'm not familiar with Mac, but I think it should work - it does in Windows: Type Subject: config in the address bar, press ENTER, accept the warning, scroll to browser.preferences.inContent and double-click on it to change the "value" from true to False, taking care to not to change what anyone else. You will then need to restart Firefox.
If your question is resolved by this or another answer, please take a minute to let us know. Thank you.
Maybe you are looking for
-
Match vs Apple-ITunes music (library iCloud)
Is there a reason to maintain a subscription Match after Apple signed music to iTunes? the main reason that I had another match was to maintain access continuous songs "incomparable" (especially my own demos and stuff notcommercially available) that
-
Satellite S70-B-117 - M265X AMD cannot run games
Hello on my new s70-b-117, I can't start my steam games.I downloaded HL2 and Portal 2, Lost Coast, but when my switch able graphic option is enabled performace max (the m265x should go) I can only see the title with options screen but I can't click a
-
How can I unlock an iPhone backup if I forgot the password
How can I unlock an iPhone backup if I forgot the password encrypted
-
All-in-one printer, HP Photosmart C5280 - Mac OS 10.7.5
Having problems printing, either from the Web or a document. I keep getting this error message: cupsRasterInterpretPPD has an error: Page header uses the unsupported values. What is the devil This means and how to do? Found nothing on the Site to he
-
Set the folder to display the update to display everytime I open.
Well Yes, everytime I open a folder I re - check the little box that is a pain in the _ and uncheck a bunch of unnecessary stuff. I would like to customize it so that it remains the same, each folder has different uses. I went to the options when I o