Reverse question - "T" multiscreen

Similar Questions

• Reverse question of selection

  Whenever I use the pen tool and then converted to a selection from the path, it automatically return it.

  When I try to fill the path, it also fulfills the reverse as well.

  Anyone know what could be causing this?

  You have the pen tool drew reverse traces, make sure the Options bar and make sure that it is set to add to the path:

  http://help.Adobe.com/en_US/Photoshop/CS/using/WSfd1234e1c4b69f30ea53e41001031ab64-7395a.h tml

• Problems with UTF-8 and PHP - OIC

  Hello!

  I'll get into serious trouble with UTF-8. I just tried to insert a lambda in a NCLOB column in one of my databases and it has been converted into a reversed question mark. I checked the channel reaches my PHP script code correctly. Also selecting RAWTOHEX (column) in this SQL Developer, the inverted question mark is already stored in the column. So the problem must be somewhere between PHP - OIC and the database. Insertion of a lambda via SQL Developer works. I can also correctly it back via PHP.

  I use the last PHP - BILL (2.0.8). v$ version says "Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production.

  The database is quite old and uses WE8MSWIN1252 like game characters and AL16UTF16 as the NCHAR character set. That's why I use NCLOB instead of CLOB. However, I connect to the database with AL32UTF8, because my application is running in UTF-8 format. I was under the impression that this would result in automatic conversion of UTF-8, UTF-16, by inserting in the NCLOB columns, but apperently this is not the case. It seems that there is a kind of double conversion, first UTF - 8 and UTF - 16 then WE8MSWIN1252 because some characters not ASCII as a (a trema) get properly converted to UTF-8, UTF-16.

  Any ideas? I am at a loss here. Thanks in advance.

  Does not support PHP OCI8 NCLOB or NVARCHAR2.

  See NCLOB support in OCI8

• inverted exclamation mark

  Our DW application gets extracted files with exclamation point reversed as the delimiter.
  
  Our application stores the delimiter as a parameter. But our problem is that we cannot insert the exclamition brand in the comic book.
  Whenever we try to insert and select it to read that he becomes the reversed question mark.
  
  Is there any solution for this?
  Any correct character set?
  
  Thanks in advance...

  JBI Sharma says:
  problem is that we cannot insert the exclamition brand in the comic book.
  Whenever we try to insert and select it to read that he becomes the reversed question mark.

  What game character and code point is the character (inverted exclamation) "extract files"?

  How can I insert the character, and what is the target database character set (assuming that the column of type char)?

  How do you choose, have you considered possible display problem? (e.g. use dump() to check stored character data)

• Bug? Quote simple copy and paste from MS Word

  I don't know if this is a bug or not. Whenever I have a copy of MS Word with single quotes (for example, it is just a 'test') and put it inside an af:inputText field, save the value in a Java bean and then retrieve it for editing, single quotes become a reversed question mark (i.e., it's just a ¿test¿) this is only the case every time I have copy the text from MS Word. Copy from Notepad or Wordpad, but also enter manually the text not produce the bug said.
  
  Does anyone have an idea about this problem?
  
  Thank you.
  
  -rolly

  ... and no, I don'think it's a bug because you are facing a character conversion, which for example also happens when copying and pasting from Word to Powerpoint

  Frank

• Help! Question of layer mask and reverse brush colors

  For days now, I was unlucky in my quest to find an answer as to why my brushes became out of whack. When I use a brush and paint on the same area, the colors are reversed in this area! Ive set brush settings by default, but the question will not let me be! Layer masks have become another issue. The white rush works but not the black. Opacity and flow is set to 100. Please help because nobody has found an answer.

  You can post a screenshot? Looks like your blending mode of the brush is put on the screen and not normal.

• With data - loss question mark reversed

  Hi people,
  
  Linux - 11.2.0.2.0
  
  When I try to insert special characters (' € @, etc.), it turns out as question mark reversed or some unwanted values.
  
  NLS_CHARACTERSET = WE8MSWIN1252
  
  Please suggest on the same.
  
  Thank you
  KSG
  
  Published by: KSG January 11, 2012 20:50

  KSG wrote:
  Srini,

  Yes, the mab issue be with the app/jdbc driver (driver newest is used).

  Now suspicious lossy data are perhaps because of the database being upgraded to 11 g, using imp/exp (without csscan).

  Exp/imp will not result in data "lossy" condition that the process ran correctly - in fact, it's the recommended way to change charactersets. See http://docs.oracle.com/cd/E11882_01/server.112/e10729/ch11charsetmig.htm#CEGCHGIJ.

  Is there a reason exp/imp has been used on the DBUA preferred method for the upgrade?

  My web application runs on Java. There is a field "note" in the application, when some NOTE are back extract, it appears with undesirable characters (upside down question mark points, #53 @, etc.). The note field can be typed with any language like french, English and other.

  PL specify exactly how you 'see' data - through the app through SQL * Plus, through SQL Developer, or in some other way?

  At the end of the database. I create a table and insert special characters. When I retrieve the data through sql, absolutely no problem. The data are very good.

  Yet once, pl specify exactly how you 'see' data.

  The problem arises when data is inserted at the end of the application.

  Thank you
  KSG

  How the application connects to the database?

  HTH
  Srini

• Question simple reversal...

  Hi guys... Simple question...

  I have 1 MC with buttonMode = true. There are 2 text fields that are nested inside the graph 1 button inside the MC. My question is that when I roll my mouse and my switch, the roll effect is gone if I roll over my text fields... the mouse is still inside the button image but the roll effect has gone... see below...

  -------------------

  |  TextField one |

  |  TextField b | <-button

  |                 |

  -------------------

  I hope that I explain myself well... when I roll over to textfield a or b... the effect for my button, the reversal went... ideas? Thank you...

  use:

  yourmc.mouseChildren = false;

• Question about reversal of pin of the PXI-6562

  I have a PXI-6562 card with cable which is the note.

  Note  If you create a customized with connector wiring solution (779157 - 01) and cable (192744-01), the NI 656 x pinout is reversed at the level of the end fitting. For example, the signal on pin 1 on the previous figure would map to pin 73 at the level of the end fitting.

  Pin 1 go back to pin 73, but what about the pairs?

  Pin 2 return to 71 or 72?

  1 - 73

  2 - 72

  .....

  73 - 1

  All pin codes signals add up to 74

• Question of failure path reverse NAT

  Hello

  Using a sense 9.3 3 ASA 5512 - x running. I have Anyconnect VPN configured to PAT the subnet of remote access to one of the inside of the interfaces (because of internal routing restrictions).

  For example...

  Remote subnet: 192.168.10.0/24

  Internal subnet: 192.168.1.0/24

  Internal interface: 192.168.1.254

  All remote access clients behind 192.168.1.254 and it works correctly until I have add a dynamic NAT rule for outbound traffic, then I start to see the errors "reverse path NAT failure" when VPN clients try to access internal resources.

  network of the LAN1 object
  subnet 192.168.1.0 255.255.255.0
  NAT dynamic interface (indoor, outdoor)

  Is there a way to circumvent this problem, because all the remote access clients are hidden behind the interface address?

  Thanks for any help.

  Hello

  Instead of making nat under Group, have you tried to do globally as:

  NAT (inside_101_infrastructure, outside) static dynamic source of destination interface LAN-GROUP ANYCONNECT_VPN_SUBNET ANYCONNECT_VPN_SUBNET

  Thank you

  PS: Please do not forget to rate and score as good response if this solves your problem

• ODI reverse Oracle views &amp; Tables question

  Hi all
  
  I am facing this problem:
  
  I can't reverse Oracle tables or views of 'schema_A' on a db Oracle using ODI. I am trying to reverse the views created with user_B on schema_A., User_B is not the owner of the tables, but there are points of view. These views and tables has CERTAIN rights to user_B in schema_A.
  
  I am able to see and select lines on these views and tables by using the credentials Oracle SQL Developer and user_B, but I am not able to reverse engineer in ODI.
  Checkboxes to invert the views and tables have been correctly selected.
  
  Kindly let me know if there is no work around that we can use to put views of theses in ODI.
  
  Kind regards
  Andrei. -.
  
  Published by: 964212 on October 9, 2012 11:10

  user database server is schema_B?
  physical schema created the schema_A?

  for example:
  demo of Oracle schema is HR
  We usually create database server using System
  then the physical schema on human resources

• Reversal/deployment question

  I created a flash animation simple for a customer who makes a loop 3 times. At the end of each round, I want to add a button that will stop the action of the main movie and reveal a small pop-up for legal copy when the user hovers over it, then re-boot the film once again they roll-off-however, it will only do so when the user interacts with the button, if they do not touch, the film will continue through 3 loops without hindrance.

  Side note: I can't use pause and play buttons, it must be a function simple reversal/deployment.

  Can someone help me with the script? Any ideas?

  If you know how to code deployments bearings using instance names, then you just need to have the code deployment in the main assembly and use play() and stop() controls...

  btnName.onRollOver = function() {}

  Stop();

  }

  btnName.onRollOut = function() {}

  Play();

  }

• Question of reversal of the rate year end (retained earnings)

  HFM retained profit showing wrong values after the years end (for January). This is the case for all entities of parent to the total level of local currency (Curr Total entity), but if we look at the total values USD is showing good values...

  Thank you

  MB

  The fixed. The rules file is not executed on account of gains for these entities. I opened thosecountiresran building on this cell. Now the ischanges of data.

  @Thanos and CWetterwald: thanks guys for your help.

• Question of boring reversal

  OS X 10.6.3 / CS5

  How to stop banks object to highlight whenever you hover over them?

  Thanks for the trick (and bad news) - I could wear my thumb out on the space bar. I might be old school, but each update seems to be one step forward and two steps back.

• Question of reversal

  I have inconsistent results with my navigation. I have bearings that operate on most of the pages, but for some reason, not on the whole. The code seems to be the same for me. Could someone point me in the right direction?

  Animated navigation buttons work here: http://www.aquapup.com

  However, the bearings here do not work: http://www.aquapup.com/gallery.html

  Thank you!

  Open your page in DW CS5, I am told that there is a syntax error at line 25, which is-

  }

  It seems that there is an extra closing brace.  Delete it.  It should make your bearings then work.