reversed spot colors on the screen

Similar Questions

• Satellite L300 - I do not have 32-bit colors on the screen

  Hi all

  I just bought a new laptop Toshiba Satellite L300 and after Vista initial installation it doesn t show the colors of the screen properly. I set up the resolution, but also the 32-bit color, but on the screen, it shows just something like 256 colors.

  Everyone he knew similar, any idea where I should look like or change something to have own 32-bit colors.

  Thanks Zeljko

  Hello

  To be honest, it's really strange.
  What you could do is to repeat the HARD drive recovery.

  Turn on the laptop, press the F8 key and choose fix my computer.
  Then choose Toshiba Recovery and you start the resettlement process.

  The laptop must be set to the factory settings, and you can check if the display problem would persist.

  Good bye

• Satellite L850D - lines of color on the screen of the BIOS

  Hello

  I have a q L850D-12 (PSKGAE) and sometimes when I try to boot in the BIOS by pressing F2, I get vertical and horizontal lines and colorful on the screen some time, I get a beep sound while its weight this and other times I just get the line that I usually remove the battery and put it again and it will enter the bios setup.

  Any ideas what the cause?

  It s just an idea, but maybe it s a graphics card problem.
  In your case, I would ask the authorized Toshiba maintainer for the verification of the material.
  It is best to do while the laptop is always protected by the guarantee.

• background color: I want to change the background color of the screen of the monitor

  I have a web image in my Office I want to change the background color of the screen of the monitor without a change in the office itself

  could you let me know how to do this?

  Thank you

  I have a web image in my Office I want to change the background color of the screen of the monitor without a change in the office itself

  could you let me know how to do this?

  Thank you

  Hello

  To change the color of the desktop background, follow these steps.

  Click on the desktop and select personalize.

  At the bottom of the window, select the color of the window.

  In the next window, select the Advanced appearance settings.

  In the element , select Office.

  Click the drop-down color 1 menu and select your favorite color. ClickApply/OK.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• How can I change the color of the screen on the websites?

  While ' messing around ' in the center of control & with stuff I know nothing about, (Duh...). I changed the color of the screen on the sites I visit, to green color. This makes the text in blue on the screen of the site impossible lo read, especially on the areas where they are needed to fill the void. Thank you for your time & expertise!

  I'm not sure I'm 100 percent, but you hear hyperlinks?

  If so,

  The "Windows color and appearance" window should open.

  Under "Item" click "hyperlink."

  Is that what you changed?

  If his watch as green, change it to blue and press [OK].

  If it isn't, press [Cancel].

  If it's not her, can give you a more precise description or maybe after a screenshot of the problem (without giving personal data address / email etc.).

  Note: Depending on the browser you are using, its possible to change the colors in the browser itself. For example with Firefox - FireFox Menu, Options, content, [color], will reach same choice specific to Firefox.

• Setting the background color of the screen

  Hai...

  When my application running in the Simulator, it shows only a small portion with the bgcolor that I gave in the html file. I think that the bgcolor simply encapsulates html content. So, what should I do to view the entire screen with the bgcolor.

  The problem is that in WebWorks (which uses a control called BrowserField) to view the content, the size of the display of web pages grows to the size of the content in your HTML code.

  So if height of your HTML below the screen, it will show the background color of the screen.

  To change this, you can set the window of the display using tags or set the height of the body to the size of the screen.

• To get the background and foreground color of the screen title

  Currently the title screen background color is black, and foreground color is white.

  But when we use custom theme then it can have different background and foreground colors.

  That's why I need to pick up the color of the screen title properties.

  How can I achieve this?

  Thank you

  I think you want to color your application according to the background and foreground color! Override the paint of the main method and use instance graphics for call getColor () and getBackgroundColor ()... Save it to integer variables and use it anywhere where you need...

  See you soon...

• My colors to the screen have changed - how can I change them back?

  My child was able to change the color of the screen on my Dell desktop computer. When I go to Word, the screen is black and the letters are white. I need to redefine white with black letters. Can someone help me with this problem?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a query.

  I would like to know some information.

  1. Are you facing this problem with Word?

  I suggest to refer to the Microsoft Articles help below and try the steps.

  http://Windows.Microsoft.com/en-GB/Windows-8/get-best-display-monitor

  http://Windows.Microsoft.com/en-us/Windows-8/personalize-PC-Tutorial

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Find the spot colors in the document

  I prepare a document for printing, and when I go to the package for output I get a message that there are a handful of spot colors in addition to the CMYK. Is it possible I can get InDesign to show me where in my document these tones are? (There are many graphics placed in many pages) I can't seem to find a 'show' or 'page number' for these colors. In addition, if the CMYK symbol appears to the right of the point of color in the Panel swatched, am I good as went to press?

  Maybe the satest to see where the spot colors are in use is to open the Activ separations and separations Preview Panel, and then click the eyeball next to CMYK. Everything left on the page is your direct. If you do not see a spot color in the Panel, there are none in use.

  You asked if it was safe to go to print with stains, and the answer is that it depends. Are paying you extra for the spot colors? If this isn't the case, Swatches Panel flyout menu choose Manager of inks, then check the box to convert all Spots to process and for the best conversion to any known color space, check the box to use the Lab values as well. Don't know what you mean by seeing the CMYK symbol to the right of the swatch - which means that it is not RGB, but there are two small icons there and the one on the left will tell you if the color is spot on, but neither one will tell you if it is transposed to the process in the ink Manager.

• The color in printed images is not match the colors on the screen

  I've recently updated to an iMac, retina 5K and the colors in the printed images do not match the colors of the image on the screen. I use CS6 and the screenshot below shows that, in the window of the print settings CS6 image does not match the image of origin either, the original image on the left.  I've updated all print drivers, and the images are also too green/faded when I print them, or download them on Animoto or Mpixpro.  We tried a Spyder calibration system, and that did not help.  For now, I have to make a folder separate with "twisted" images that have increased the saturation and Communists to give them a normal appearance.  Does anyone else have this problem?

  

  Unless you have a current color profile for the display you are using and you have calibrated the printer for the specific of ink and paper that you are using, its not surprising there are differences. Without a color managed workflow screen and software have no information on what the printer can produce.

  The range Spyder products are not up to the task.

  The normal options for managing your color workflow are:

  1. using the X-Rite i1 photo system,

  2. purchase of a custom profile for your type of printer, paper and ink, done by a specialist in color management

  3 - Send your files to a professional lab that is capable of producing quality work.

• Can I change the color of the screen when I open a new tab (I hate yellow)?

  On my iMac old when I opened a new tab, the screen was white. Now on my new iMac with Firefox 12.0, it is yellow. Since I like to leave a free blank tab so I don't accidentally lose an existing registered site, I see good yellow time. Possible to change the default screen color?

  Judge, with no luck, but thanks, I learned something new.
  Eureka! I just found in the preferences-> content-> fonts and colors. (now I think choosing a nice blue). Thannks, everyone for the encouragement...

• Satellite A300 - grayish colors on the screen

  Where to play games on my Satellite A300 (PSAGCA-02W010) and looking at photos of all colors seem a bit dull and grayish. When I called they said them it could be "limits the display" and I could have looked but I would be charged $120 if it was because of the limitations, I was wondering if anyone else has had similar problems with screens.

  It looks like my companion of hewlett packard LCD display which is very old.

  Any advice would be helpful!

  I have Satellite A300 and colors on the display are clear and bright.
  What games do you play? Something in the dark?
  Have you noticed the same thing if you use Vista OS for the daily work as Web-based applications or in the office?

• Re: Satellite L300 - vertical lines of color on the screen

  Hello
  All of a sudden my Satellite L300 has many colored lines running up and down the screen.
  have never seen this before on any pc, so do not know what could be the cause.

  have tried a search on this forum but found nothing relevant.

  need to know if its worth trying to fix...

  Failed to contact Toshiba other than the robot which is useless.

  Thank you

  I can't say for sure, but it might be faulty display.
  What you can try is to connect the external monitor or TV to the laptop and check if there is a problem on an external device. In case contrary it comes to the display and it should be replaced.

  Googling around you can check how much you must pay for the display again and do a rough estimate, if Exchange is the right option or not.

• Sat Pro 4270: Small lines and shades of colors on the screen

  Model: Satellite pro 4270
  Problem: Fading of colors making vertikal lines (sometimes horizontal. Espacially Fotos are not well seen. Text is no problem and the laptop is still usable. The lines are a little wobbly: get shorter and longer.
  I tried a lot of things: it seams to have nothing to do with the o/s, cause I used Win 2000, XP, and Linux.
  When I use an external display I have no problem.
  I have the actual BIOS on the Toshiba WEB Site.
  Pressing on the screen does not change.

  Someone at - it an idea? (And sorry for my English!)

  For me, it looks like you have a problem with your graphics card.

• Satellite A210-1AO: sometimes the colors on the screen become unnatural

  Hello. I have a Toshiba Satellite A210 1AO two months ago and collided with a following problem.
  Very rarely (once a week) on the screen colors become suddenly against natural.
  The problem even if it means opening / closing of coverage.

  Really the material damage?
  The problem is rarely enough.

  Hello

  I m an owner of a portable Satellite A210-10Y but I didn t notice a similar problem; running under Windows XP OS or using the Vista.

  I don t want to publish stories great but perhaps that the problem of color could be linked to the issue of the material.
  Maybe part of laptop as displays, FL-ups or graphics card would be malfunctions

  In my view, a check of laptop would be useful and I recommend you contact the ASP.
  If your warranty is the replacement of any piece of material must be covered by warranty.

  PS; Updating the graphics driver, what would you say? Did you use the latest graphic drivers Toshiba?