Review of VCP vcp4 Question format

Similar Questions

• Upgrade VCP VCP4

  Hi all

  I became VCP4 March 2011. As part of CRS courses requirnment i attaended VMware troubleshooting course VMware learing Center. Now I want to upgrade to VCP4 to VCP5. My question is that I have to compolsury that I'm already VCP 4 or can I just give secure Channel 5 review courses and pass?

  Please notify. Thanks r.

  At a minimum, you will need to take the new vSphere class 5 Whats and then pass the VCP5 test.

• VCP exam question - the difference between the file exchange and the swap partition?

  I am currently a student at my VCP and stumbled upon a question and was hoping someone could explain the answer offered.  Essentially the question is asking why you must manually create a local VMFS volume.  The possible answers were: files of storage for the service console log, decentralized storage for all the vmkernel vmkernel swap activity Exchange files for virtual machines that are configured locally and swap files from service console for the console service RAM overcommitment.

  It is my understanding that the swap partition has its own format.  When you create the necessary partitions for installing ESX format the swap partition is 'swap', not vmfs or ext - 3.  Then, because the last three options are to swap/activity files, I chose the first choice, storage for the service console logs.  This study guide says I'm wrong and the answer is VMKernel swap files for virtual machines that are configured locally.   Of course, Miss me something here...

  How you store Exchange files on VMFS partition?  I thought that the swap partition is the only place to have to Exchange files, and then it is on its own partition.  You cannot store a partition on a partition.

  Maybe it's the difference between a swap file and a swap partition which is tripping me?

  Search for, swap space as it is usually is a place to store a replica of memory the system for the purpose of managing memory better (usually data that are accessed most often).

  SWAP PARTITION is now, for the ESX SWAP space.

  And the EXCHANGE FILE is for some particular VM swap space that can be used by the guest operating system. The use of this file is managed by VMkernel. Now, this swap file has some different features from the windows of i.e normal swap, linux or ESX swap space space.

  NUTZ

  VCP 3.5

  (Preparation for VCP 4)

• Satellite A200 - question format HARD drive after replacing

  Hello

  I know this is probably a stupid question to ask as I am not that great with computers.
  I have problems with my hard drive from my Toshiba Satellite A200 laptop.

  Now, when I took it out it was a 120 GB so I bought another Seagate 320 GB hard drive to replace it.
  Now can I just put it back in or do I have to format the known brand hard drive.

  So if anyone can help it would be much appreciated

  Thank you

  Hello

  New HARD drive should be recognized by the laptop properly.
  If you purchased a HARD drive 2.5 SATA, so I put t see serious reasons why this HARD drive is not working.

  Once the HARD drive has been replaced, boot from the Toshiba Recovery disk and follow the instructions on the screen. The HARD drive must be formatted during the installation procedure
  That article should work

• Re: Satellite A300 - Question format. XP. Reinstall Vista.

  Hello

  I would like to know if I install Xp delete all partitions in my hd (now I have three, two regular and one not show).
  The Toshiba Recovery disk recreate the original partitions and install on Windows Vista?

  I'm Spanish, but I can read English.

  Thank you very much.

  Arturo.

  Hello

  Before starting to explain how it works, I would say follow: first of all CREATE recovery DVDs using Toshiba Recovery Disk Creator. Do not forget.
  With the help of this DVD, you will be able to install Vista and have factory settings once again.

  When you start installation of WXP all three partitions appears and you can select the destination for the installation of Windows XP Home edition. If you choose the C partition two others is not deleted.
  Later, when you want to install using created Vista recovery DVD disc HARD integer is deleted and formatted.

  Any other questions? ;)

• Panel application question format Table number ADF

  Hi all

  Thanks for your time in reading this thread. Here's the JDeveloper version information:

  Oracle JDeveloper 11g Release 1 11.1.1.6.0

  Studio Edition Version 11.1.1.6.0

  Build JDEVADF_11.1.1.6.0CLOUD_GENERIC_121118.1600.6229

  Copyright © 1997, 2011 Oracle and/or its affiliates. All rights reserved.

  The IDE version: 11.1.1.6.38.62.29

  Product ID: oracle.jdeveloper

  Product version: 11.1.1.6.38.62.29

  Version of the component

  ========= =======

  11.1.1.62.29 ADF business components

  Java (TM) Platform 1.6.0_24

  Oracle IDE 11.1.1.6.38.62.29

  Support versioning 11.1.1.6.38.62.29

  Question:

  ~~~~

  I created a group of ADF with Table query for all searchable attributes of a view object. Little attribute is of type database column NUMBER and their ADF attribute type is oracle.jbo.domain.Number. Some of these attributes are having more than 4 decimal places.

  For example: Cost attribute value is 1.23004

  After you run the search page, when I enter cost value as 1.23004, after the tab out. the value of cost in the criteria section is changed to 1.23 which is originally no results to return, even if the record with cost 1.23004 exists in the database. Initially, the table of results also showed only 1.23 as cost value. I changed the af: convertNumber MaxFractionDigits on 10 to show all of the up to 10 decimal precision (if it exists). After this is done, the result table shows the correct value (1.23004). but the search criteria still rounds up 1.23 for the first time. If the 1.23004 value is entered again it retains the value entered and search result works very well.

  Is there anyway that the automatic formatting of the criteria can be disabled? It is otherwise better to show all decimal values without rounding or the definition of the MaxFractionDigits?

  Really appreciate your help on this.

  Thank you.

  Sorry for the confusion.

  Build your own referee criteria view, you add the attribute number and check the tab user interface of suspicion for the attribute. Check if you can change the format here. As I'm not in front of a pc that I have to look at the other options. It may be a bug.

  There is this programmatic approach Oracle ADF Guide step by step - Oracle ADF tutorial: handle stripped to the ADF query component - see the values of input query but it should be possible to operate for the types of number with fraction numbers more then 2 out of the box.

  Timo

• Review of VCP procedures.

  Hello

  I need to know how or what is supposed to do after the installation of VMware, configure, and manage courses (VCP-410).

  I need to review what I have to do.

  I have the confirmation of course number and created an account on the EYE test centers, what then?

  Please advice

  Your pass to review must be indicated on the Pearson view site within 48 hours of the review, the VMware MyLearn website is currently only showing VCP3 certifications and even for the VCP3s happening before December 2006 - according to the page Certification VMware: http://mylearn1.vmware.com/portals/certification/

  Scott.

  -

• Review of VCP upgrade expires December 31 and problem VIEW

  Hello everyone, I am warned that upgrading VCP 310 at VCP 410 without taking a course will expire on December 31.

  I call for all Center IN my country and all are closed or no time to switch, my question is, how can I do my job, if centres do not take the tests?

  Where can send my formal questions to VMware?, you have the same situation?

  Concerning

  Try to send a PM to jonhall.

  André

• question: format / 'language' of the current Date (in the date/time field), javascript only

  Hello

  I have 2 date fields in my form, which should display the date in a different format. (yyyy.mm.dd / dd-mm-yyyy)

  To get the current date I only use java script

  Formular1.p1.date_YYYYmmDD::initialize - (JavaScript, client)
  
       var date = new Date();
      this.rawValue  =  date.toLocaleDateString();
  
  

  My first problem is (red): I get the date in English, but I want it in another language. As it was defined in the form settings

  

  My second question is: How can I format a date/time-sized (not a text field) in javascript with a model specific to the init event?

  It seems that my code in the init event replaces the model of the DateTime field configuration

  Here is my form, if anyone wants to check it out:

  https://Acrobat.com/#d=zeOMyj9MhBdYbVWk8S1pHw

  Hello

  I think that these two problems are the same, by setting a date/time field using the rawValue always format must be yyyy-mm-dd, if you use a different format, the value is just seen as text and poster without shaped.

  var date = new Date();

  this.rawValue = util.printd("yyyy-mm-dd", date);

   

  You can also set the formattedValue if you have a date in the correct format.

  var date = new Date();

  var currentLocale = xfa.resolveNode("#localeSet.#locale").name;

  var dateFormat = "date("+currentLocale+"){DD MMM, YYYY}"

  this.formattedValue = util.printd(dateFormat, date, true)

  This code assumes that the view model is date {MMM DD, YYYY}

  The date format specification is in the XFA http://partners.adobe.com/public/developer/xml/index_arch.html specification

  Concerning

  Bruce

• Review of the corresponding question?

  I have a quiz that has a few multiple choice questions, a bit of true / false, and a corresponding question. When the user completes the quiz, the Edit button will lead to the first question and told them that if they got the answer right or wrong (if they are wrong, it displays the correct answer).
  
  (1) for the corresponding question, there is no 'zone review '. Is it possible to add a?
  
  (2) once they see the responses good or bad, how they move forward to the next issue? (I don't have a button 'NEXT' on the issues).
  
  Thanks in advance!
  

  Hi, I'm Larry.

  Sorry for the wait - normally we try to be sure that no one slips through the cracks, but - you did.

  1) there is certainly an area of review for questions of "Matching". If you do see one, it was corrupted somehow, or maybe this question would not "be included in notation?

  If you are sure that the examination area isn't here - but should be - create a new question with the same question and answers slide, then delete current thie. Do not forget that you checked «Allow user to review...» "in the Quiz Manager settings.

  2) I use (only) two buttons on my quiz. And 'Next' is always one of them. I use the button 'Submit' to indicate I chose my answer, and I use the button "Next" to move forward after examining the quiz (ONLY). And I put a legend on each question slide warning the user that the ' submit button should be used to move forward EXCEPT when the review is completed. "

  I hope this helps. An example of what one of my films has scored may resemble that of this link. It is a film about the different types of film - a trivia game and the ability to print a completion certfiicate if you pass (but not if you don't). Enjoy!

• Question format/reformat?

  Try to install Vista on a hard drive. Only have an OEM drive, which obviously does not settle as the old disks used for xp. I tried using the formatting format option and it takes like 10 seconds and says its done. I know that it is not directly on a 300 GB drive. In any case, I was told to choose the option REPAIR and then command line option and that I could format from the command prompt. I do not know what command to enter.
  The existing drive is the letter C. I want to start this installation on a clean slate, as I had so many problems of error and want to make sure that I have eliminated all the info from the previous installs.
  Can some genius of computing there spare a few minutes to help me?
  Be also quite specific.
  Thanks in advance.
  PS I have read a lot on the line on the way to reformat a FAT32 to an NTFS, but nothing on how to use the repair at the command prompt to reformat an NTFS disk formatted with the command fdisk to NTFS.
  If I don't do the right thing please let me know the roght process to wipe this clean drive for a new installation.

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Vista automatically formatted to NTFS.

  7. where do you want to install Windows? Here you can see a graphical representation of the hard disk of your PC (s), giving you the opportunity to select a partition on which to install Windows Vista. On a system that is brand new, a reader, you will probably see a lists of partition, as shown in the screen shot to the left. However, this phase of the installation program includes a number of utilities, hidden under the option 'Drive Options (Advanced)', which can help you perform various actions, most of which will be of interest for those who have multiple partitions, or those who think they might want to later dual-boot Vista with another version of Vista or perhaps a version of Linux. (If you think you want to dual-boot Windows Vista with XP, you must install XP first. "I'll describe this process early in part 4 of this series). Look at some of the interesting options available under 'Drive Options (Advanced)' before continuing. By default, this phase of Setup has two basic options: A. this will refresh the graphical view of partitions and disks at your disposal during the installation of Vista. Load driver. If you use some sort of advanced disk controller and, therefore, some discs are not appearing in the installation program, you can use this option to load the drivers now, with the hope that the drives will be available for you. For example, some RAID tables are not immediately recognizable for Vista Setup. Click on drive options (Advanced), however, and a number of new options (Figure): Remove. If you are working with a hard disk has several partitions and want to delete one or more of them, perhaps to later create a unique (using New, discussed below) partition, you can use the option Delete (Figure). Delete Deletes the partition and marks the space occupied by this partition as being free and empty. Format. On a hard disk with existing partitions, you can use the Format command to erase all the data on these partitions and return to a condition as new, blank. Note that the formatted disks are essentially empty and that the Windows Vista Setup program does not require you to explicitly to format a partition before installing: If you choose an empty partition, Vista Setup will automatically format the drive for you.

  New. On a hard disk with partitions not configured (i.e. a 'clean' or blank disc), you can click this option to create a new partition (Figure). This partition can be measured in the physical ability of the underlying disk (and is by default), but you can eventually choose to leave empty space for the creation of the partition and formatting later. (Windows Vista includes tools for this purpose.) In general, I recommend simply create a partition that is the same size as the underlying disk, formatting and installation of Vista.

  Extension. If you work with a drive hard partition and other disk hard space empty and want to extend this partition so that it now includes all or part of the empty space, you can use the command Extend (Figure). Note that empty space well be logically available 'behind' the partition selected for this command works. And do not take all available space: the installation program will allow you to choose how you want to add to the existing partition.

  Note: the Windows Vista installation program creates only NTFS partitions. Frankly, anyone who tries to use just at that moment: FAT32 doesn't get it: NTFS is the traditional file system used on Windows today and the only type of file system you use in the future.

  Anyway, once you have determined the location to which you intend to install Windows Vista, you can click next to continue.

  Mick Murphy - Microsoft partner

• question format toolTip_enable on alignment

  I'm on Apex 3.2 and uses tooltip_enable like this:

  onmouseover = "toolTip_enable (event, ' format your entry in this field like this: < br > 1.)" [Option description] < br > 2. [Option description] < br > etc. ") »

  And I want the ToolTip to align the text with the left side of the popup. I tried and it did not work:

  onmouseover = "tooltip turn on (this.style.textAlign = 'left'; toolTip_enable (event, ' Format your entry...))"

  There is no either. How can I get the popup content helps align left instead of Center justified?

  Thank you!!

  Hello

  Try to add to the header of html page

  Kind regards

  Jari

• VCP requirements question

  Currently, I am a vcp3. I took and passed the vcp4 test but I have yet to take the class. I was wondering if I can just take the VMware vSphere: Troubleshooting training instead of VMware vSphere: what is, since I already know what's new?

  Thanks for any help on this issue.

  check requeriments: http://mylearn.vmware.com/portals/certification/faqs.cfm

  http://myLearn.VMware.com/mgrReg/plan.cfm?plan=12457&UI=www&HL=PT-BR&SourceID=GD&rlz=1Q1GGLD_pt-BRBR411BR412

  Please, do not forget the points of call of the "useful" or "correct" answers

  Mauro Bonder - moderator

• VCP Test question

  Before VI 3.5 VCB requirements were a machine running windows. Today, you can run VCB as a virtual machine. My question is, the test has been updated to reflect these changes.

  Even with FC storage, you can run VCB in "hot add" mode in a virtual machine, for example there is a "nbd m" switch for the command vcbmounter - data is transferred through the stack of I/O of ESX servers in the virtual machine, so it is not the same as running on a physical machine with the transfer of the data being based entirely on the SAN , but it still works

  Scott.

  -

• APEX 5-question format calendar change

  Hello

  I created a calendar like this page.

  Is it possible to change this color of blue background to something else or just remove the bule color?

  My eyes hurt just too with this blue.

  

  JonDaegu-Oracle wrote:

  Hello

  I created a calendar like this page.

  Is it possible to change this color of blue background to something else or just remove the bule color?

  My eyes hurt just too with this blue.

  

  An explanation of how to display events in different colors using CSS classes is given in the online help for the region of Class CSS calendar attribute. Add a column to the query of calendar that determines the color of class for the event:

  SELECT ID,

  START_DATE,

  END_DATE,

  TASKNAME,

    case STATUS

  When 'open' then 'apex-cal-green.

  When "Pending" then "apex-cal-yellow".

  When 'Closed' then 'apex-cal-red '.

  When "pending" then "apex-cal-black.

  end as css_class,

  ASSIGNED_TO as supplemental_info

  PROJECTS

  and select it in the attribute of Class CSS region.

  Built-in support exists for the following classes/colors:

  • Apex-cal-black
  • Apex-cal-blue
  • Apex-cal-bluesky
  • Apex-cal-Brown
  • Apex-cal-cyan
  • Apex-cal-blue dark
  • Apex-cal-grey
  • Apex-cal-Green
  • Apex-cal-lime
  • Apex-cal-orange
  • Apex-cal-Red
  • Apex-cal-silver
  • Apex-cal-white
  • Apex-cal-yellow

  You can also create your own combinations of colors using custom classes and CSS.