question format toolTip_enable on alignment

Similar Questions

• Satellite A200 - question format HARD drive after replacing

  Hello

  I know this is probably a stupid question to ask as I am not that great with computers.
  I have problems with my hard drive from my Toshiba Satellite A200 laptop.

  Now, when I took it out it was a 120 GB so I bought another Seagate 320 GB hard drive to replace it.
  Now can I just put it back in or do I have to format the known brand hard drive.

  So if anyone can help it would be much appreciated

  Thank you

  Hello

  New HARD drive should be recognized by the laptop properly.
  If you purchased a HARD drive 2.5 SATA, so I put t see serious reasons why this HARD drive is not working.

  Once the HARD drive has been replaced, boot from the Toshiba Recovery disk and follow the instructions on the screen. The HARD drive must be formatted during the installation procedure
  That article should work

• Re: Satellite A300 - Question format. XP. Reinstall Vista.

  Hello

  I would like to know if I install Xp delete all partitions in my hd (now I have three, two regular and one not show).
  The Toshiba Recovery disk recreate the original partitions and install on Windows Vista?

  I'm Spanish, but I can read English.

  Thank you very much.

  Arturo.

  Hello

  Before starting to explain how it works, I would say follow: first of all CREATE recovery DVDs using Toshiba Recovery Disk Creator. Do not forget.
  With the help of this DVD, you will be able to install Vista and have factory settings once again.

  When you start installation of WXP all three partitions appears and you can select the destination for the installation of Windows XP Home edition. If you choose the C partition two others is not deleted.
  Later, when you want to install using created Vista recovery DVD disc HARD integer is deleted and formatted.

  Any other questions? ;)

• Panel application question format Table number ADF

  Hi all

  Thanks for your time in reading this thread. Here's the JDeveloper version information:

  Oracle JDeveloper 11g Release 1 11.1.1.6.0

  Studio Edition Version 11.1.1.6.0

  Build JDEVADF_11.1.1.6.0CLOUD_GENERIC_121118.1600.6229

  Copyright © 1997, 2011 Oracle and/or its affiliates. All rights reserved.

  The IDE version: 11.1.1.6.38.62.29

  Product ID: oracle.jdeveloper

  Product version: 11.1.1.6.38.62.29

  Version of the component

  ========= =======

  11.1.1.62.29 ADF business components

  Java (TM) Platform 1.6.0_24

  Oracle IDE 11.1.1.6.38.62.29

  Support versioning 11.1.1.6.38.62.29

  Question:

  ~~~~

  I created a group of ADF with Table query for all searchable attributes of a view object. Little attribute is of type database column NUMBER and their ADF attribute type is oracle.jbo.domain.Number. Some of these attributes are having more than 4 decimal places.

  For example: Cost attribute value is 1.23004

  After you run the search page, when I enter cost value as 1.23004, after the tab out. the value of cost in the criteria section is changed to 1.23 which is originally no results to return, even if the record with cost 1.23004 exists in the database. Initially, the table of results also showed only 1.23 as cost value. I changed the af: convertNumber MaxFractionDigits on 10 to show all of the up to 10 decimal precision (if it exists). After this is done, the result table shows the correct value (1.23004). but the search criteria still rounds up 1.23 for the first time. If the 1.23004 value is entered again it retains the value entered and search result works very well.

  Is there anyway that the automatic formatting of the criteria can be disabled? It is otherwise better to show all decimal values without rounding or the definition of the MaxFractionDigits?

  Really appreciate your help on this.

  Thank you.

  Sorry for the confusion.

  Build your own referee criteria view, you add the attribute number and check the tab user interface of suspicion for the attribute. Check if you can change the format here. As I'm not in front of a pc that I have to look at the other options. It may be a bug.

  There is this programmatic approach Oracle ADF Guide step by step - Oracle ADF tutorial: handle stripped to the ADF query component - see the values of input query but it should be possible to operate for the types of number with fraction numbers more then 2 out of the box.

  Timo

• Review of VCP vcp4 Question format

  Hi all

  I have a question about the format of the questions real vs the way the questions are asked on the SLOG - SimonLong-blog and on the website of the education of vmware. I understand that these issues are about to a way that is ideal to get acquainted with current technology and basic information. But as I'm a "Terrified of TEST" person you will ever meet. My questions are these. The exam questions are mostly straight up do you know that? OR are they more taste of the scenario of line 5 which in fact asking the same thing, but see if you can understand the basic question? Focusing primarily on!

  Thank you

  GEO!

  VCP4 questions are normally very simple and easy to understand - I would not describe them as "wordy". You know the answers to the many questions at the time wherever you have finished reading the question on the screen. Don't forget that you must answer 85 questions in 90 minutes, so you get a lot of time for reflection - I trained a guy a few weeks ago, who has completed the review all in 23 minutes and got a great score

  Scott.

  -

• Question of the engineer: alignment restrictions

  I have a question about the limitations of capacity of automatic alignment that I'm hoping one of the Photoshop engineers--or another qualified member of the community - would be perhaps able to field.

  I tried, in vain, to use PS CS5 to precisely align groups of photographs stars, as many people do with other applications. I need to align a group exactly - at a level of precision - pixel images and combine them into a single flattened image. I do this with hundreds of groups made up of thousands of individual image files, so when announced CS5 features auto-align and auto carpet, this seemed to be an almost ideal solution.

  After stacking the different images together and despite the fact that each layer is very almost identical to the others, PS still reject them the standard dialog that it could not find sufficient overlap ("Needs to have at least 40% overlap", etc.). I tried this with dozens of different groups of stars, each > 99% identical to the Visual content and always the same rejection.

  One immediate line of thought I had was if Photoshop was too bad to distinguish individual stars against the noise typical in astrophotos like these. It does not apply the first noise reduction: when PS digs into images to find the adjustable content or forms, he can consider it as more different than they appear to the eye, and PS can be distinctly stars as a noise not. I don't know enough about the alignment feature to really say what is a failure here.

  There are many other specialized applications that perform this function (PixelInsight, Registax, etc), but as a professional user dedicated products Master Collection, I was hoping an engineer's knowledge if this type of image in fact beyond the capabilities of recognition of native images of alignment. Alternatively, if there are additional steps or the preliminary adjustments that might help the algorithm in his treatment, I would be interested to hear about those. I am also willing to post images of reference if it is an aid to analysis.

  Thank you very much.

  No work around, because it is difficult to add edges to stars :-).

  The alignments in Photoshop code is not good for the stars, the Moon, or most of the nebulae.

  It's something, I'd like to research guys to work on, but it will take some time to get to a reasonable algorithm (first attempt worked too slowly to be useful).

• question: format / 'language' of the current Date (in the date/time field), javascript only

  Hello

  I have 2 date fields in my form, which should display the date in a different format. (yyyy.mm.dd / dd-mm-yyyy)

  To get the current date I only use java script

  Formular1.p1.date_YYYYmmDD::initialize - (JavaScript, client)
  
       var date = new Date();
      this.rawValue  =  date.toLocaleDateString();
  
  

  My first problem is (red): I get the date in English, but I want it in another language. As it was defined in the form settings

  

  My second question is: How can I format a date/time-sized (not a text field) in javascript with a model specific to the init event?

  It seems that my code in the init event replaces the model of the DateTime field configuration

  Here is my form, if anyone wants to check it out:

  https://Acrobat.com/#d=zeOMyj9MhBdYbVWk8S1pHw

  Hello

  I think that these two problems are the same, by setting a date/time field using the rawValue always format must be yyyy-mm-dd, if you use a different format, the value is just seen as text and poster without shaped.

  var date = new Date();

  this.rawValue = util.printd("yyyy-mm-dd", date);

   

  You can also set the formattedValue if you have a date in the correct format.

  var date = new Date();

  var currentLocale = xfa.resolveNode("#localeSet.#locale").name;

  var dateFormat = "date("+currentLocale+"){DD MMM, YYYY}"

  this.formattedValue = util.printd(dateFormat, date, true)

  This code assumes that the view model is date {MMM DD, YYYY}

  The date format specification is in the XFA http://partners.adobe.com/public/developer/xml/index_arch.html specification

  Concerning

  Bruce

• Questions about css vertical-align

  given a list of the CSA page: Technologies of Mac OS X

  I do not understand vertical-align.  I will like to center the text in the vertical alignment.  I don't know what basis means, or intermediate. Where Ref base?  background of the characters or what?  I don't know how to work the percentages.

  In addition to all this lack of knowledge, 5% of the centers of communities Word for some reason I don't know.  'Contact support' appears to be centered for some reason any.

  with this css

        /* top line:
           Communities                Contact support */
        header#j-header nav#j-globalNav-bg {
            background-color: tan !important;
            margin-top: -15px !important;
           }
         /* Communities */
        div#body-apple header div#apple-site-title a {
          
            font-size: 20px !important;
            background-color: yellow !important;
            vertical-align: 5% !important;
           }
        /* Contact Support */
        div#body-apple header ul#contact-support-link a {background-color: pink !important;}
  

  Try http://www.w3schools.com/cssref/pr_pos_vertical-align.asp.

  TT2

• Question format/reformat?

  Try to install Vista on a hard drive. Only have an OEM drive, which obviously does not settle as the old disks used for xp. I tried using the formatting format option and it takes like 10 seconds and says its done. I know that it is not directly on a 300 GB drive. In any case, I was told to choose the option REPAIR and then command line option and that I could format from the command prompt. I do not know what command to enter.
  The existing drive is the letter C. I want to start this installation on a clean slate, as I had so many problems of error and want to make sure that I have eliminated all the info from the previous installs.
  Can some genius of computing there spare a few minutes to help me?
  Be also quite specific.
  Thanks in advance.
  PS I have read a lot on the line on the way to reformat a FAT32 to an NTFS, but nothing on how to use the repair at the command prompt to reformat an NTFS disk formatted with the command fdisk to NTFS.
  If I don't do the right thing please let me know the roght process to wipe this clean drive for a new installation.

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Vista automatically formatted to NTFS.

  7. where do you want to install Windows? Here you can see a graphical representation of the hard disk of your PC (s), giving you the opportunity to select a partition on which to install Windows Vista. On a system that is brand new, a reader, you will probably see a lists of partition, as shown in the screen shot to the left. However, this phase of the installation program includes a number of utilities, hidden under the option 'Drive Options (Advanced)', which can help you perform various actions, most of which will be of interest for those who have multiple partitions, or those who think they might want to later dual-boot Vista with another version of Vista or perhaps a version of Linux. (If you think you want to dual-boot Windows Vista with XP, you must install XP first. "I'll describe this process early in part 4 of this series). Look at some of the interesting options available under 'Drive Options (Advanced)' before continuing. By default, this phase of Setup has two basic options: A. this will refresh the graphical view of partitions and disks at your disposal during the installation of Vista. Load driver. If you use some sort of advanced disk controller and, therefore, some discs are not appearing in the installation program, you can use this option to load the drivers now, with the hope that the drives will be available for you. For example, some RAID tables are not immediately recognizable for Vista Setup. Click on drive options (Advanced), however, and a number of new options (Figure): Remove. If you are working with a hard disk has several partitions and want to delete one or more of them, perhaps to later create a unique (using New, discussed below) partition, you can use the option Delete (Figure). Delete Deletes the partition and marks the space occupied by this partition as being free and empty. Format. On a hard disk with existing partitions, you can use the Format command to erase all the data on these partitions and return to a condition as new, blank. Note that the formatted disks are essentially empty and that the Windows Vista Setup program does not require you to explicitly to format a partition before installing: If you choose an empty partition, Vista Setup will automatically format the drive for you.

  New. On a hard disk with partitions not configured (i.e. a 'clean' or blank disc), you can click this option to create a new partition (Figure). This partition can be measured in the physical ability of the underlying disk (and is by default), but you can eventually choose to leave empty space for the creation of the partition and formatting later. (Windows Vista includes tools for this purpose.) In general, I recommend simply create a partition that is the same size as the underlying disk, formatting and installation of Vista.

  Extension. If you work with a drive hard partition and other disk hard space empty and want to extend this partition so that it now includes all or part of the empty space, you can use the command Extend (Figure). Note that empty space well be logically available 'behind' the partition selected for this command works. And do not take all available space: the installation program will allow you to choose how you want to add to the existing partition.

  Note: the Windows Vista installation program creates only NTFS partitions. Frankly, anyone who tries to use just at that moment: FAT32 doesn't get it: NTFS is the traditional file system used on Windows today and the only type of file system you use in the future.

  Anyway, once you have determined the location to which you intend to install Windows Vista, you can click next to continue.

  Mick Murphy - Microsoft partner

• APEX 5-question format calendar change

  Hello

  I created a calendar like this page.

  Is it possible to change this color of blue background to something else or just remove the bule color?

  My eyes hurt just too with this blue.

  

  JonDaegu-Oracle wrote:

  Hello

  I created a calendar like this page.

  Is it possible to change this color of blue background to something else or just remove the bule color?

  My eyes hurt just too with this blue.

  

  An explanation of how to display events in different colors using CSS classes is given in the online help for the region of Class CSS calendar attribute. Add a column to the query of calendar that determines the color of class for the event:

  SELECT ID,

  START_DATE,

  END_DATE,

  TASKNAME,

    case STATUS

  When 'open' then 'apex-cal-green.

  When "Pending" then "apex-cal-yellow".

  When 'Closed' then 'apex-cal-red '.

  When "pending" then "apex-cal-black.

  end as css_class,

  ASSIGNED_TO as supplemental_info

  PROJECTS

  and select it in the attribute of Class CSS region.

  Built-in support exists for the following classes/colors:

  • Apex-cal-black
  • Apex-cal-blue
  • Apex-cal-bluesky
  • Apex-cal-Brown
  • Apex-cal-cyan
  • Apex-cal-blue dark
  • Apex-cal-grey
  • Apex-cal-Green
  • Apex-cal-lime
  • Apex-cal-orange
  • Apex-cal-Red
  • Apex-cal-silver
  • Apex-cal-white
  • Apex-cal-yellow

  You can also create your own combinations of colors using custom classes and CSS.

• Question format mask

  Hi all
  
  I need to convert a number '178473' to ' 000178473.00'.
  
  I tried this, but of no use.

  SELECT TO_CHAR(LPAD(178473.00,9,'0'), '999999999.00') FROM DUAL;

  Required: 000178473.00
  
  THX
  Rod.

  You just need to replace the 9 by 0.

  SELECT TO_CHAR(178473.00 ,'FM000000000D00') FROM DUAL;
  

  FM deletes white space on the left side. D is for the decimal separator, you respecting the NLS parameters.

• Question - Format

  Hi friends,
  
  Please,
  
  I have this view:

         DECODE(forma_comissao1,'Q','Valor','P','Porcentagem')||': '||formatar_valor(cc.comissao1) com1,
         DECODE(forma_comissao2,'Q','Valor','P','Porcentagem')||': '||formatar_valor(cc.comissao2) com2,

  The return when a null value is->:
  
  What can I do to return null... I Don t want to return->:
  
  Thank you

  This will work:

  DECODE(forma_comissao1,'Q','Valor' ||': '||formatar_valor(cc.comissao1),'P','Porcentagem'||': '||formatar_valor(cc.comissao1), null) com1
  

• Question of alignment for VM storage

  Hi all

  I have a question regarding vmware storage alignment ESXi4.0 Update1 VM I hope that you can help clarify:

  I have a couple of Linux virtual machines, I created using VI client so I know that the logical drives are alighned. A virtual machine has a logical drive, and the second VM has two logical drives. I have 2 data warehouses the in ESXi host, datastore 1A the installion of ESXi and VMs are on the data store 2. My question is if I go to browse the data store and move directories VM data store to data store 1 2, restarted the server and then moveed the directories to the data store 2. This causes the logical drives to be out of alignment?

  Thanks for your help!

  Hello.

  No, move these discs will not change alignment on them.

  Good luck!

• Can I reuse the topics without reuse formatting?

  Hello world

  I would like to create a new project where I can reuse my old subjects. Can I import the themes in a form not formatted? I have a lot of trouble with weird old styles that are not good like WebHelp, or PDF. Is it possible to get rid of these styles and apply only beautiful, new, controlled styles?

  Does anyone have any experience with that?

  Thanks in advance!

  Best regards, Hanne

  Hi again,

  First of all on your borders in pdf format. You prefer to open a new question about print forum documentation to keep this thread clear. I think I've seen this problem before, please research a bit before posting a new question.

  On alignment. The style "BOLD" does that your text bold, it is not initially strange alignments. I think I know what is the cause, but you're not going to like it: This means a lot of work by hand

  I'm going to assume that this problem is only with individual tables, on those, so it isn't a problem of style sheet. If it where in your style sheet, all your paragraphs would be erroneous. If you have this same problem for all tables, it will probably be a css problem.

  As see you in the code, most table linesand cells in a tablehave a class like class = whs10. This class is generated by robohelp when you create your output. In HTML view, go to the top of the file and you will find a

  One of these styles contain text text-align: right; or text-align: center; Remove all instances of these texts and your paragraph should align with OK.

  I think most of your problems of style whsxx styles, if you remove these styles in your theme, your hairstyle should reset for most. You will then need to remodel your subjects, by hand... I don't know how many subjects you have, but I suggest that know you exactly what each problem style and the link between it and a css style attribute. Then, remove this style of styles attribute at the top of the topic.

  You can find css all the attributes of style here, or you can post questions and I'll tell you the corresponding style attributes. It might be wise to rewrite these topics when you add or remove text, because these topics will give you problems whenever you want to change a style.

  Welcome,

  Willam

• How to convert music files ATRAC (*.oma) file MP3 format? is not compatible w/4 use w/microSD card for LG Optimus Elite

  a lot of my music files are ATRAC (*.oma file extension) and not accessible to my LG Opitmus elite under the music after that I copied on my microSD card. I told myself it's not compatible and they must be converted to MP3 format.  I got the music loaded on SonicStage to my Sony Walkman Bean. Y at - it a program that will allow me to convert folder music in MP3 ATRAC (when I use the conversion tool, it gives me only option on hidden in ATRACplus.

  all the knowledge and assistance would be greatly appreciated thanks

  a lot of my music files are ATRAC (*.oma file extension) and not accessible to my LG Opitmus elite under the music after that I copied on my microSD card. I told myself it's not compatible and they must be converted to MP3 format.  I got the music loaded on SonicStage to my Sony Walkman Bean. Y at - it a program that will allow me to convert folder music in MP3 ATRAC (when I use the conversion tool, it gives me only option on hidden in ATRACplus.

  all the knowledge and assistance would be greatly appreciated thanks

  ===========================================
  I have no personal experience with the file in question format
  but a Google search turned up the oldest following the links that
  can provide some useful ideas.

  Sony support - MP3 Conversion tool
  http://eSupport.Sony.com/Perl/SWU-download.pl?upd_id=2971

  Where can I find an online converter that can convert Sony
  OMA to MP3/WAV files?
  http://answers.Yahoo.com/question/index?QID=20081013065044AABoD9N

  Conversion of Sony Atrac3 / OpenMG (.) OMA or. OMG files)
  http://Forum.dBpoweramp.com/showthread.php?7532-Sony-OMA-OMG-file-conversion-some-actual-facts