RGB to CMYK becomes brown white

Similar Questions

• RGB to CMYK conversion in artificial intelligence

  Hi, my printing says a RGB file I sent him, and he needs to CMYK for printing.

  (1) how can I know that the original file is RGB color mode?

  (2) how to convert file have RGB CMYK AI file?

  Thank you very much!!!

  lhcheng,

  (1) file > Document Color Mode.

  (2) tick CMYK instead of RGB.

  You should be aware that the colors RGB and CMYK are fundamentally different, so more likely, you will need to create at least a few colors again, and you have to accept some inevitable changes.

  Many RGB colors will be changed to CMYK rather muddy and messy, as you can see in the color palette when you select CMYK.

  And a lot of bright colors will become less.

• How to convert RGB to CMYK images in batches

  Hello

  Can someone explain in a way step by step how to convert RGB to CMYK images batch?

  Thanks in advance

  If you do not want to use Photoshop for the conversion of bact there are several ways, including lots and Image Procesor under the file > controller or file > Scripts of PS.

  However, my preference is to use the script from Russell Brown: Image Processor Pro, via the bridge:

  http://www.russellbrown.com/scripts.html

  Like other similar is transformative image:

  http://www.scriptsrus.TalkTalk.NET/

  Both allow you to make several conversions simultaneously, different sizes and file types and actions running before or after conversion.

• Satellite L300-PSLB8E - screen becomes all white and the laptop freezes

  Hello

  I have a Toshiba Satellite L300 PSLB8E. I initially bought with Windows Vista already installed on it. After a few years, I changed the operating system Windows 7 Ultimate. I installed the display and all the other necessary drivers (that is, sound, network, etc.).

  After I installed Windows 7, when I use the laptop for a while, the screen becomes all white and the laptop hangs. This happens spontaneously. Sometimes, in less than 10 minutes and other times that it can work perfectly for hours. I checked for loose batteries and other components, but everything seems fine.

  Physical damage only that there is a tiny crack on the screen in the bottom right of the screen. The operating system is not good? If I put windows Vista back as it was?

  Please advise and help understand me what the problem is with the laptop.

  Until we start discussion can you tell me what you do when this happen?
  Hard stop and restart?
  Is everything OK again when you do?

  It is not easy to say what exactly is the problem, but I put t think there is problem with OS and preinstalled display driver. A long time ago I installed Win7 Home Premium on friends L300 and it works perfectly.

  What you can try is to use the external monitor for a while and see if everything works well. If so, there is no problem with the operating system, drivers or graphics card. It may be that the display problem.

• After Windows automatic update, laptop screen becomes completely white

  After the automatic update of Windows, the screen of my laptop to become completely white. I have to Ctrl/alt/del to Task Manager. The bottom of my screen appears, but no wallpaper, shortcut icons, etc. I disabled the automatic update and it seems to work fine. What could be the problem? I am running Vista.

  Following the advice of a friend who had the same problem, I deleted all my cookies. Surprisingly, this fixed my problem. Thank you very much for your help!

• is the driver for win 8 for the printer photosmart D7360 RGB or CMYK?

  Hello

  I'll use Lightroom 4.2 (under win 8 64) and will have calibrated the monitor and the printer (HP Photosmart D7360) by colormunki photo.

  When the printer profile is generated by colormunki, according to the real printer driver, they will be RGB or CMYK profile.  Apparently, 4.2 LR will only show printer profiles to use if the printer driver is of type RGB.  So if it's CMYK, I would not be able to use the printing profile in LR.

  Is someone can you please tell me if this printer driver is RGB or CMYK?

  Any help will be greatly appreciated!

  Kind regards

  The pilot waiting for RGB data.  The real color in the printer inks use CMYK, but managed by the driver, applications need to send RGB data to the driver.

• How to make an RGB or CMYK AI file to STAY in color, despite the presence of black?

  I give up. If I presented all lines at all in black to start, no matter how much color needs to go in the illustration, it will be necessary to constantly hit the color/options/RGB or CMYK registration to continue working in color. Complete a curve, join the ends, fill it with red... No, it seems, with the grey wire. Go to the color, poke 'options' Panel, scroll down to RGB. Check. Back to the figure of the curve. Adjust the black line. Fill with... Gray again. Back to color Panel. And so on. Is it possible to declare an image "RGB" or even "CMYK" and make it stick? I mean, same CMYK? What Black INCLUDES? And you, CMYK? I tried Document Setup-did not have a difference.

  The only solution I can think, after all this, is to dump black entirely and start all the drawings with lines of red, blue, green or dark blood. Does anyone have a better solution?

  If you select your line, not the K 100% color panel shows?

  Then, you work with the grayscale option.

  Select a line, choose: select > same outline color.

  Go to the Options of the color Panel and switch to CMYK.

• Hello setup I can't UN plug "SuperBladePro", it appears shaded in my menu of filters, I'm restarting the software changer in RGB or CMYK nothing happens. Thank you

  Hello setup I can't UN plug "SuperBladePro", it appears shaded in my menu of filters, I'm restarting the software changer in RGB or CMYK nothing happens. Thank you

  Hi jessicam,.

  Please see the help - Flaming Pear Software

  Ensure that:

  • active layer is visible.
  • active layer is not locked.
  • active layer is not text or vectors.
  • Selected area is not completely transparent. If this is the case, painted in a neutral color first.

  Kind regards

  Assani

• How to change the default value for [Black] RGB to CMYK Indesign CC2015

  I inherited a file which is defined by default black in RGB. In the preparation of the document, its intention is set up to print. How can I change the mode from RGB to CMYK color? I already tried to convert profiles and assigning profiles. I use InDesign CC2015.

  Thank you!

  Create a new print document with the same basic grid settings and the same size of document with page 2.

  Drag all the pages from one to the other document.

  Remove the first 2 pages.

• Is it possible to convert RGB to CMYK images in Photoshop elements 12 or 6 Lighroom?

  Hello

  I am a freelance photographer, asked to produce images in CMYK mode to print. For the type of work that I normally do, Photoshop Elements is good enough. So, I bought not the full program of Photoshop. I can´t seem to find a way to convert my RGB to CMYK files. Someone at - it suggestions on how to do it?

  Grateful for any help.

  Kind regards

  Anna

  Elements has no CMYK support. You need the full Photoshop for this.

  However - you have good CMYK profile for the real press and used paper. If they ask CMYK without specifying exactly what CMYK profile to use, it's a gift: they have no idea of what they are doing. So ask them that.

  In any case, the common nowadays procedure is to present photography as RGB equipment, to be converted to CMYK destination on final export as PDF ready from the program layout (InDesign). This means that the images are placed as RGB in InDesign. In this way the material can be easily reused for press different conditions.

  In other words, if they run a color managed properly the process. There are still some who don't.

  CMYK standards vary around the world. The default value of Photoshop's us Web Coated (SWOP), which is not used anywhere outside America. Here in Europe the most commonly used are ISO Coated (ECI) 300% or Coated FOGRA39.

• Change RGB to CMYK color Panel

  Dear Indesign scripting,

  I wonder if there is a script of hollow so that the Panel color in Indesign CS5 can switch from RGB to CMYK

  Of this:

  

  To do this:

  

  Greetings.

  Hi beh_gras_beh

  app.menuActions.itemByID (29189) .invoke)

  Will add a CMYK color without a name who will do the work for you and won't cost you a color without a name (thanks to Jareck that about 25 here Re: coloring a font with a RGB, etc. without adding color in the color chart document.)

  There might be an another menu item to use, but I have my doubts.

  Concerning

  Trevor

• It is possilble to convert RGB to CMYK in PES 11?

  My external printer uses CMYK only and when they convert my RGB to CMYK image, color printed is different then the color that I see on my screen.  I searched the community for a similar question previously asked, but discussions gives me for PES 11.  Thank you.

  It is the same for all versions of PSE: No. Adobe is very strict on conservation that as one of the differences between PSE and Psalm you could ask your printing service if they do. They will generally, but at an extra cost. If you need to do this a lot you should consider the upgrade to CC.

• Why the relative values of RGB and CMYK will not change when switching between Photoshop and InDesign?

  I'm trying to put together a Guide to color for my company's brand guidelines.

  Initially, I worked for InDesign and copied all H, RGB and CMYK values that I had when I went in an eye my original color palette.

  However when I put the same values of RGB in Photoshop I gives me a (somewhat) a different set of CMYK numbers than I had initially documented in InDesign.

  Why is this?

  JamieCurtis5 wrote:

  It makes me feel a bit nervous leaving aside CMYK all together...

  CMYK is essential for a company's brand guide. The printer ask again, it's a simple and direct question. If they cannot answer this fundamental question, that speaks well of their professional standards. It is a common practice and highly standard procedure. I do it all the time (and get answers directly in the world).

  That said, if this guide in general and not necessarily related to this particular printer, it might be preferable, specify a profile which is commonly used as a general practitioner in your area. It depends on where you are. Here in Europe, it would be either Coated FOGRA39, ISO Coated v2 300% (eci).

  In the United States, I guess us Web Coated (SWOP) v2 would be on a list, not because it's necessarily just for the purpose, but simply done to be the default Photoshop. Printers must get loads of the present. Same here in Europe, where this profile is never used any where, a lot of people use it just because it is the default value of the PS and it never gets turned into something more appropriate.

• Convert RGB to CMYK and RGB image

  Hey.

  I wonder if anyone has any experience with conversion of RGB to CMYK and RGB image?

  I had a TIF in RGB, then convert to CMYK, but I thought it would be best to keep in RGB, so I converted. I read that he meant to cause losses in the data, but I don't see anything in the image, it's always very huge and 2 RGB files has the same size as well. Is there a way to compare the resolution of 2 images somehow, or how I can see what I've lost through 2 conversions?

  
  

  Thanks for help

  You wrote:

  "I read that he meant to cause losses in the data, but I don't see anything on the image.

  Data loss, you refer relates to the compromise made when appearing in RGB colors fall outside the range of available colors printing inks. In such a case, substitutions are made in the conversion of RGB to CMYK based on your choice of the Conversion Option > intent found in Edit > color settings. The good news is that if you don't see a color change when you switch from RGB to CMYK and vice versa, this means that none of the colors in RGB mode are outside of the range of CMYK ink. I suggest that intention more appropriate for the mode switches such as the one you mentioned Relative Colorimetry is the choice more practical.

  When RGB, clicking Cmd + there will show a color change if the colors are outside the range of ink. Another signal is an exclamation point beside the CMYK numbers in the info panel. To see which areas of the image are affected by the limitation of printing ink, choose View > Gamut Warning.

• Auto RGB to CMYK

  When I open a file in photoshop cs5, I want that it automatically converted from RGB to CMYK with me having to kick off any action.  I got this Setup on my old computer.  Pls help.

  Maybe you had an Action or Script and it triggered by the event is open to

  File > Scripts > Script event handler

  But why to convert CMYK images anyway?

  And you are certain that particular CMYK meets all future needs?