RH8 and broken links

Similar Questions

• cannot repair broken links

  Hello

  I've got broken 267 links on a single page, all the images.

  There seems to be no difference between the survivors of the links and broken links,

  I tried to fix the links in the link Inspector and the properties panel, which failed.

  I think that it can take a long time to fix, so I don't want to go down the wrong paths, especially with me being a relative newbee a whole.

  The page in question is here:

  http://denchworthponds.co.UK/pond%20Construction.html

  It's a site heavy image in which each image has

  a miniature, a miniature bearing and a great lightbox image that is activated when you click on the thumbnail

  122 links are OK, 267 links are broken.

  I didn't notice before I downloaded the site as happening in "Preview in browser".

  Maybe the problem is in my code - I hope so.

  Would it be one of the following values?

  1 / the pictures are in the image files in the folder of images on my local site, it's a bad habit to have folders in the folders on my local site? (i've got charges)

  2 / since registration (for the Web and devices) the images on my local site, I have many of them reopened in photoshop for alteration of the image, I was checking for an increase in file size so I did change the images, but do not see. Then, of course, I saved their return in the same folder with the same name etc. Was the problem that I simply recorded images and is not saved for the Web and devices? -they were already optimized. (some images have been changed manually, others using the Actions palette)

  3 / some of the file names are probably not friendly DW, for example;

  the pond6thumb4 file is located in my 12pondbuild6 4/11 folder,

  DW reads this folder as 12pondbuild6 4% 3 a 11 - that is the problem?

  (and, as I say, this folder is inside the Images folder on my local site)

  The mystery to me is that 122 links are not broken, and I see no difference between the survivor and the broken links. It all seems a bit arbitory.

  I'm running CS5.5 on a 2007 iMac core duo desktop computer.

  Any thoughts anyone?

  Thank you for your time and greycells in advance

  -Shaun

  Yes OK, it was indeed the names of folders:

  change 12pondbuild6 4/11

  What DW reads like 12pondbuild6 4% 3 to 11

  at 12pondbuild6

  -and then you can fix the link in the link checker

  -I think he'll be a night loong.

  -Shaun

• I imported a SVG in muse.  She builds and presents in preview.  However, once published, the graphics are shown as a broken link.  What I am doing wrong?

  I imported a SVG in muse.  She builds and presents in preview.  However, once published, the graphics are shown as a broken link.  What I am doing wrong?

  When you save your SVG chart, be sure to check the option to embed images. Otherwise, images will appear in the SVG as a link to a separate file and link-outs when you download the SVG.

• Broken and missing links in Muse

  Hey guys,.

  I am a rookie to Muse that stop messages on 'missing or broken links' every time I open my website or try to publish in a folder. I am building a portfolio for me site and I have several PDF files and various links throughout my site. I did well to keep all my files in a folder that is centralized so that I can relate, but I can't understand why they break in first place.

  It is frustrating extreeeemely and a complete waste of my time. Anyone has any advice on the 1) how to fix the broken links constantly and 2) how to archive and keep my files so that this does not happen in the future?

  Please let me know! Thank you!

  Hello

  Please refer to the following article to find out how to link assets: http://helpx.adobe.com/muse/using/working-assets.html#id_95168

  Did you record the asset or the .muse on an external disk file or a network drive?

  Kind regards

  Aish

• Deleted pages appear as broken links, but no link never went to and from the

  Tech

  • RoboHelp 10 (project upgraded RH7, 8 and 9 years)
  • Windows 7
  • Connected to a VSS repository.

  Question

  The title describes what is happening, and I want to know how to clear the list of broken links these links.

  Here's what I did

  1. Through the TOC sidebar, I added a page. (right click > new > Page).
  2. Through the new TOC pop-up window, I added a new topic.
  3. After you have added the new subject, he appeared on the project view and the table of contents, as it should.
  4. I wrote a bit in the file:
     1. I created several files, some using templates and variables defined by the user, others with nothing more than your standard, white page.
     2. There is no incoming (that I know) or outgoing links.
  5. I have advanced and deleted the table of contents entry and the entry in the project view.

  Here is what happened

  1. The file appears in the list of broken links.
  2. When I vew its properties, it says there are no references.
  3. By clicking on 'Edit' does nothing.
  4. The question that's happened with several test pages, which none related to what either.

  

  History

  • I inherited this file to another writer.
  • Basically, I try to understand what they did or did not do with this project.
  • At present, there are literally hundreds of links broken, broken images, and I'm sure I saw a monster hidden in the code.

  TIA.

  Hello

  It is possible that a lag occurs between the project. DPC and the main database file. My suggestion would be to delete or rename the. CPD file.

  You will find it among all the other files in the folder where your project is located.

  Give a go and report back what your outcome is.

  See you soon... Rick

• A broken link in RH8 - details please

  Dear Experts,

  I tried following in the other displayed items relating to this topic, but they all appeared to be different from what I am seeign in my project. I know how to fix borken links (for example) in the files themselves, however, when the current folder "links" in the project manager, I can't delete the links are no longer needed, or to see clearly if I still need them, it's a bit overwhelming, as I moved some information within a project, and (while my application kept crashing - another story) whenever I have re-opened, it does not seem to clear the changes I'd made through caching clear as I have in my game to the top.

  Within the MP, if I right click on the broken link, I do not get an option to explore, I have only the following:

  

  However, when I click on restore in this dialog box, or even if I select the see the link and try and restore, nothing happens. I tried to correct current in one of the real issues and remove the link and then re - insert it and then by recording information, and remains. Unfortunately, I broke the links to the real topics that are used throughout the entire project, (as fundamental for the generic search and other things)... so it has now created havoc for me, and I can't seem to start with a single. I know if I can get a course, I will be able to quickly correct others, but he cannot know. (probably right under my nose).

  This sounds like there is unsaved when changes to your project the project / PC crashed. As a result, RoboHelp got a little lost as to what should be there. I think that the answer must first close your project backup and then delete the file from the DPC project. If the poster project always broken, links open files individual topic links and ensure they point to the right file. It may be preferable to reinsert the links. Save as you go, and I hope that broken links will disappear. Let us know how you go.

• broken link is not repairable

  I'm on RH8. I have a broken link, which I can't get rid of. When I try to import the htm, HR gives me a message that the subject is already in the project file. Is there a way to fix this? Or what I need to do something weird like delete the subject of this project and then re-import to get rid of the broken link?

  The key is that you can't have two files of the same name in a project, unless they are in different folders. So, you could import the file in a different folder or delete the other file. Only you can say what action is best.

• How can I remove a broken link?

  You don't really know if there is a better way to put it. Basically my browser is to register a bookmark, but nothing more than his name; no location, nothing (see the url of the image: http://tinypic.com/r/2n1z4x/5).
  It cannot be deleted or moved or whatever it is. It isn't really much of a problem more that all bookmarks below don't appear in the menu of the toolbar, but I don't want it if possible.

  Because the bookmarks file is actually readable in Notepad ++, I think it's the broken link (given the entry until it is the bookmark located directly above the toolbar):

  {'index': 2, 'title': 'Tags', 'id': 4, 'parent': 1, 'dateAdded': 1357947259755000, 'lastModified': 1357947259755000, 'type': ' text/x-moz-place-container', 'root': "tagsFolder", "children": []}

  Assuming that is the question, I would be fine in just this deletion or would do a different course of action?
  Would be back up and then restore the question clearly?

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• Re: Satellite L300-214 PSLB8E - update Bios broken link

  I had the laptop Toshiba Satellite L300 - 214 PSLB8E.

  Since a few days, I checked the Web from Toshiba site against Bios upgrade and found a new bios, finally, the link is broken. He points to http://support1.toshiba-tro.de/tedd-files2/0/bios-20090430112041.zip; I checked http://support1.toshiba-tro.de/tedd-files2/0/ and couldn't find any close file of that date (30/04/09).

  Can someone indicate something?

  Hi mate

  I found some similar discussions on the broken links to the BIOS update and I think that there is a server problem I think you should try to download the BIOS in the next few days

  See you soon

• Identify broken links referenced through the smart album

  Hi guys,.

  I work with LR and export my photos in a floder I download later in Photos, due to its integration in OS X for viewing, sharing, etc...

  I use the option referenced in Photos app to do not copy the photos twice on the hard drive.

  As I sometimes delete image files in the finder folder, I have a few photos that have a broken photo link.

  I want to identify these photos so I could remove them in Photos.

  I would use a script for this preference, but that I don't know, I was wondering if I could have all these images link broken in a smart album to delete manually.

  Photos already has a smart album to identify all referenced images, but not that particular option with broken links.

  Do you have an idea for this?

  Concerning

  I would use a script for this preference, but that I don't know, I was wondering if I could have all these images link broken in a smart album to delete manually.

  I doubt that a script to access information on the State of the references.

  The only properties of a media element that are accessibe in Photos are:

  

  What you could try would be write a script, which tries to export all the photos in your referenced photo album.  and if export encounters an error, catch the error and add a keyword to the photo.

• Fallout3 and Broken Steel, Point Lookout was working fine in windows7 ultimate 24 hours ago, now all of a sudden after loading when I hit continue it crashes

  original title: fallout3

  Fallout3 and Broken Steel, Point Lookout was working fine in windows7 ultimate 24 hours ago now all of a sudden after loading when I hit continue it crashes, Intel processor Core i3-2100 3.10 GHz (Sandybridge) Socket LGA1155, Asus AMD Radeon HD 6770 DirectCU 1024Mo GDDR5 Mushkin Silverline #991768 4 GB (2x2gb) DDR3 1333 MHz 9-9-9-24, thanks in advance, Morgan

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  Fallout 3 is not compatible with windows 7. See the below link for the same thing:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=fallout&OS=32-bit

  Method 1:

  You can even check this link: make sure to run older programs in this version of Windows: http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows

  Method 2:

  However, start your computer in a clean boot state, and see if that fixes the problem.

  See How to solve a problem by performing a boot in Windows Vista or in Windows 7

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

• Broken links in the desktop icons

  Hello

  I have a problem that arises at a time it is caused by a virus in my computer and eats all my programs. I managed to solve a lot of problems, I now have icons on my desktop, but the links do not work for programs that they guess, nothing happens. I get a message that there is no program associated with the icon.  In order to enter a program to open, I do a right-click on the icon my computer, and then open the program of the left column.

  I spoke with a rep at Microsoft on a different issue, and he said he thought that my 'user name' has been altered and that I should change.  I have a new 'user name', but I need to transfer all my programs to the new user to correct broken links.

  Any suggestions on how I can fix the link and transfer programs on the new user, as I have no idea? Thank you

  Trish512

  Please contact me at * address email is removed from the privacy *

  Hi Trish512,
   
  Run the troubleshooter from this link and check if it helps to fix the problem:
  Difficulty of broken desktop shortcuts and common system maintenance tasks

• Windows Search 4.0 for Windows XP (KB940157) - broken link

  It is a broken link, it seems

  I want to download the patch
  http://download.Microsoft.com/download/a/5/6/a56b2342-8ebe-46FF-85f7-d9a9ca887bfa/windowssearch-KB940157-XP-x86-enu.exe
  Indicates the following.
  This is a fix for the instant search in outlook 2007.
  Help, please
  Oops! This link seems broken. Suggestions:

  • Go in microsoft. com
  • Go to download. microsoft. com
  • Go to the site map www. microsoft. com/site map
  • Search download.microsoft.com download a56b2342 8ebe 85f7 d9a9ca887bfa windows search KB940157 x 86 enu 46ff

  https://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Above is XP Newsgroups link.

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  Outlook and Office link above discussion groups.

  Here is the Vista Forums.

  And if you gave the link is the exact link, it is not broken.

  If you copy and paste it into IE7 > click on the go button! > you will be offered the file to download. You go to the Web page.

  See you soon. Mick Murphy - Microsoft partner

• Latitude 10 driver's cab and broken ST2E driver's cab.

  If I updated the driver for my Tablet 10 Latitude and ST2E on my MDT 2012, only to discover that the cab files are broken and fail to read. I tried with the A01 version without problems, but using this im missing a lot of drivers when I deploy. In society, I have been working in there is no problem with the normal laptop and office model, but these tablets is not working only not with the driver installs. Is it possible to get the driver cab files replaced by someone who works. Thank you very much.

  Thomas

  The ACR ST2E has been updated and published (link below).  ACR 10 Lat (ST2) got hung in the web promotion process that should be fixed soon.

  http://en.community.Dell.com/TechCenter/enterprise-client/w/wiki/4727.Latitude-10-st2e-Windows-8-driver-cab.aspx

• ODI 11 g than Smart Import report a broken link.  How can I find what to connect to?

  I did a Smart Export of several data stores from a development environment to import to a new development environment.  When I try to import data warehouses I receive warnings about the links broken on several objects.

  The elements are W_STATUS_D, OVERWRITE action: there are 2 problems, both the Broken Link type.

  ODI-10111: flex referenced by < null > FfValuew < OBI_DOMAIN_1 > field is missing

  ODI-10111: flex referenced by < null > FfValuew < OBI_DOMAIN_2 > field is missing

  
  

  Event the applicant, action OVERWRITE, question type Broken Link, ODI-10111: flex referenced by < null > FfValuew < OBI_IS_PARTITIONED > field is missing.

  W_WRKFC_EVT_MONTH_F is ODI-10111: flex field < OBI_PRUNE_DAYS > referenced by FfValuew < null > is missing

  
  

  Can any that describe what is the problem of broken links and how to determine which should link the link when I fix the problem?
  

  
  

  Oracle support told me to ignore the errors and continue with the imports.  No adverse effects have been observed after taking this action.