Right click in Windows vista file is not open after the restoration.

Similar Questions

• ENcypted file does not open and the key file is lost.

  Hello

  Does not open my encrypted file and the key is lost.  I did it in windows 7 and my system crashed.  I then restoed operating system, then my encrypted file does not open and the key file is on the same partition and also, he was gone.  It of a personal record and is very important and punch.  I tried to take possession of the file and that did not work I was wondering if there is a tool or method which can decrypt the file.  I know that their around the key file, or if there is a way to get the certificate... Please help.  Thank you for your help and answers.

  If your certificate and key are lost or damaged and you do not have a backup, you will not be able to use the files that you have encrypted.

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-lose-your-file-encryption-key
  "What to do if you lose your file encryption key.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-an-encrypted-file-if-I-am-denied-access
  "How to open an encrypted file if I am seen refuse access?"

  Cordially,

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• FrameMaker 12: Book files do not open within the application

  When I perform the following functions, open files as separate files instead of opening in the application itself.

  (1) open the FrameMaker book.

  (2), select all the files listed in the book

  (3) right click and select Open

  Files, but opened instead of appear correctly in the Document tab (), they open as individual files. When I hover over the application in my taskbar to office, there are several open documents.

  Why is this happening? How can I fix?

  Thank you!

  Having Documents > consolidate all tabs to anchor them on the tab bar?

  

  

• Ultiboard files does not open in the box tool

  MS began to open UB files in Ver13 for some reason, I went and removed my 11-13 versions.

  Now they will not open in the box tool MS at all.

  I can open them directly from UB14 and then loading the file of design project...

  How can I fix?

  OK, I've corrected this myself.  Win10 has a 'useful' feature that resets your associations to file something, they think you will like better (to them) without your permission.  In this case it was probably changed to ver13, then a stranger after that I removed ver13.

  Don't know if that's what caused it this time, but I just had to go together as the association of file back to the correct version of ultiboard.

• Based Windows Vista desktop does not open photo files.

  original title: Windows Vista based desktop will not open picture options, documents or games.
  

  Missing file?

  When I get on my Vista based desktop and click the photos option, it is no longer opens.  Documents, music, games, open etc.  It's like disappeared.  I have

  am running a free program that seems to take forever.  Is there an easier way to simply restore the photo file that seems to be missing or messed up?

  Hello

  1 did you changes to the computer before the show?

  Try the methods provided below and check if the problem persists.

  Method 1:

  If you can't find a file you're looking for, it could have been recorded in or moved to a different folder than you expected, or the file had been sent to the trash.

  You can start the search for the file by using the search folder, but you can also get the file by inspecting folders where you think the file is likely to be.

  Method 2:

  Try not to article

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

  If the problem occurred recently, then you try to perform a system restore and check if you are able to locate the missing files.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

• Files and images folder in Windows Vista will be not open?

  For some reason, my program Windows Vista images files and folders

  will not open or view more?

  Only some are open not all. ??

  You need help

  Thank you

  Hi Laura,

  1. do you get an error message when you try to open?
  2. don't you make changes to the computer before the show?
  
  I suggest you perform the clean boot and check if you are able to open the pictures folder.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 clean boot KB929135 article to reset the computer in normal mode.

• MY WINDOWS VISTA COMPUTER DOES NOT START AFTER CLOSING GAME?

  LAST NIGHT I WAS PLAYING THE GAME ON THE COMPUTER. THEN I TURNED OFF THE COMPUTER. THEN LATER WE I SWTICH IT ON AGAIN NOW IT DOES NOT START THERE FACT THAT HAPPING PLEASE SOMEONE CAN HELP ME THANKS

  What happens if you go in Mode safe?
  Screen opens in safe mode?

  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly press F8 key until you see a black and white screen.
  The top/down arrow and select Mode safe mode with command prompt.

  If you manage to logon in safe mode, follow these steps:

  1 do a system restore. Choose the date BEFORE you played the computer game, as your restore point.
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, click
  > Next > finish
  To sit and wait. The machine restarts when it's done.

  2 make a check of the file system. It's for search files corrupted and did try to fix them.

  Start button > Search box type cmd > look up, do a RIGHT click on cmd.exe > click run as
  Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

• HP integrated family camera on windows vista premium does not work with the new version of Skype

  I can do everything a coup is no longer video calls via the new version of Skype - on my Windows vista computer family premium. and the older version of Skype is no longer available for download... Help, please.

  It would be best if you contacted Skype support team regarding this issue.

  They are experts in the field of your request and would be in a better position to answer your concerns. You can contact them through this link:
  

  
  

  You can also join the community of users here:

  
  

  How can I contact Customer support https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service?intcmp=SN-Mods

  
  

  
  

• When playing VLC media player it take about 20 to 30 seconds to open. When I push a right-click take about 3-5 seconds to open, why the difference?

  original title: on laptop
  I have a computer dell laptop (N4050). My lappi work slowly, when you play it take about 20 to 30 seconds to open the VLC media player. When I push right click it take about 3-5 seconds to open.
  so. Mr President, give me the solution to my problem.

  Hello

  1. which version of the operating system is installed?

  2. is the VLC media player-specific question?

  Try the following steps.

  Clean boot the computer and then try to open the VLC media player. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Reference:

  Optimize Windows 7 for better performance: http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Slow PC? Optimize your computer for maximum performance: http://www.microsoft.com/athome/setup/optimize.aspx

  I hope this helps.

• Windows Vista - what should I do after system restored?

  My home edition vista recently will not start. After I turned it on, it loads for a while and stops automatically. I tried pressing some buttons for example F2, F8, F10 function for repair and recovery, and it is able to load the previously saved startup page. After that I turned it off, it cannot start again. I tried twice on the recovery of reparation and restored successfully, but now the repair and recovery seems no longer works.

  (1) what should I do if I managed to open the start page?

  (2) what could be the cause of it? In any case to restore so that it will work like new?

  Hello

  See if that helps you.

  Startup Repair options.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Reinstall options.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Import audio data - window of Audio sync not opening during the audio broadcast on multiple slides

  Hello

  I am importing PowerPoint files in Captivate 4 with the view with audio recorded separately on top of these PPT Slides.

  The PowerPoint file and associated slides to import with no problems. When I import the audio in the timeline view, it treats the MP3 file without any problem and adds the audio file to the library and the first slide. I can get the window asking me how I want to import the audio, to shich, I select the audio acorss to distribute several slides option.

  In previous versions of Captivate, the Audio sync popup then appears to allow me to choose at which points to divide the audio between slides. Unfortunately the Audio Synchronization window does not appear.

  My system Details are as follows:

  -PowerPoint 2007 slides

  -Captivate 4

  -Windows 7

  No reason as to why this problem occurs?

  M.

  Hello

  Please try to open the Captivate as an administrator-

  Solution 1:

  1. go to the Captivate installation location. Generally, it is present here-

  C:\Program Files\Adobe\Adobe Captivate 4

  2. right click the "AdobeCaptivate.exe' and select 'run as administrator '.

  3. now try to run the same steps. It should work

  If this does not work, try the following set of steps mentioned below.

  Solution 2:

  Close the Captivate and try the following.

  1. Identify the location of cmd.exe. Usually found in C:\Windows\System32\
  2. Click right-click on cmd.exe > select run as administrator
  3. Launches the command prompt
  4. Now, go to the Adobe Captivate 4 installation location. In your case, it may be C:\Program Files\Adobe\Adobe Captivate 4
  5. Now, run the command regsvr32 NSAudio.dll
  6. Once you get a confirmation dialog box, run the next command regsvr32 WaveEditCtrl.ocx
  7. Again, you should get a confirmation dialog box.
  8. Now launch Captivate and try the same steps. It should work.
  Kind regards
  Mukul

  Post edited by: mvlele

• Windows XP Pro do not validate after the removal of the hard drive

  In an older machine, I have a copy of Windows XP Pro, it is validated and worked perfectly fine, until I removed a dying hard drive of the machine, then it is suddenly telling me that the OS is not genuine. I can't get to turn on again in a way that I can think of, and I don't see anything immediately above that might interfere with the activation. I would really not like to re - install the operating system, anyway I can activate it again without doing so would be greatly appreciated.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Release status: not activated
  Validation code: 1
  Code of Validation caching: n/a
  Windows product key: *-* - JDXP9 - YQMPT-PV6W9
  The Windows Product Key hash: Mswj72n9x6CWvQJkYD/iCUveKFo =
  Windows product ID: 55276-011-7468674-22229
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 5.1.2600.2.00010100.3.0.pro
  ID: {D730A716-4A4F-4A70-B708-ED8CCC1134FF} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation of diagnosis: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Caching of results: 1
  File: Yes
  Version: 1.9.40.0
  WgaTray.exe signed by: Microsoft
  WgaLogon.dll signed by: Microsoft

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: 2.0.48.0
  OGAExec.exe signed by: Microsoft
  OGAAddin.dll signed by: Microsoft

  OGA data-->
  Office status: 114 blocked VLK 2
  Microsoft Office Professional Edition 2003-114 blocked VLK 2
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {D730A716-4A4F-4A70-B708-ED8CCC1134FF}1.9.0027.05.1.2600.2.00010100.3.0.prox 32*-*-*-*-PV6W955276-011-7468674-222295S-1-5-21-220523388-1364589140-725345543to be filled by O.E.M. power O.E.M. American Megatrends Inc.. P1.50 20080409000000.000000 + 0000ACF0FE00184807804090409US Mountain Standard Time(GMT-07:00)03114114Microsoft Office Professional Edition 20031159D1605114E3500vfZmaSmFPIYrLWTcZSZErUQg Fo plus73931-640-0000106-5721714

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: no
  BIOS marker string: N/A
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  If the activation of the Internet does not work, then see the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com

• Unable to change the base installation of Windows Vista Edition language family by using the restore Vista DVD

  I have Fujitsu Siemens ESPRIMO Mobile (laptop) with pre installed Windows Vista Home basic. It is in the English language.

  When I want to re-installed Vista using (supplied with Labtop) restore DVD, after the installation, it is in Arabic. I tried to change this language but I can't. Could you please help to solve this problem.

  Thank you

  Hello

  You will need to contact Fujitsu about this.

  You cannot change languages with Vista Ultimate and Enterprise.

  You can have a different result if you try reinstalling using this method.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• window "Save as" does not open for the cutting tool

  How can I get the window "Save as" to open when I used the Snipping Tool and you want to save it?  I must have changed something by mistake and now it will not open.

  Hi MD4evr4JG,

  Step 1: It looks like the tool cutting options have been changed. Try these steps and check if recording is enabled.
  a. click on start, type cutting tool and click on enter.
  b. on the tool window capture, click an item Options.
  c. on the capture tool Options window, place a check mark on "the prompt to save the shears before leaving.
  d. click ok to apply the changes.
  e. restart the cutting tool and check the result.

  See Tool captures: frequently asked questions

  Step 2: If the problem persists, run SFC (System File Checker) scan to find and repair missing or corrupt system files
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.