Files and images folder in Windows Vista will be not open?

Similar Questions

• Based Windows Vista desktop does not open photo files.

  original title: Windows Vista based desktop will not open picture options, documents or games.
  

  Missing file?

  When I get on my Vista based desktop and click the photos option, it is no longer opens.  Documents, music, games, open etc.  It's like disappeared.  I have

  am running a free program that seems to take forever.  Is there an easier way to simply restore the photo file that seems to be missing or messed up?

  Hello

  1 did you changes to the computer before the show?

  Try the methods provided below and check if the problem persists.

  Method 1:

  If you can't find a file you're looking for, it could have been recorded in or moved to a different folder than you expected, or the file had been sent to the trash.

  You can start the search for the file by using the search folder, but you can also get the file by inspecting folders where you think the file is likely to be.

  Method 2:

  Try not to article

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

  If the problem occurred recently, then you try to perform a system restore and check if you are able to locate the missing files.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

• My applications, including Windows Store, will be not open.

  I would like to help to try to fix these problems if that is possible since this is the first question, I met with this computer a year and a half of owning. System Restore was the first thing I wanted to try, but after running of the it, it didn't work. Afterwards, I ran the troubleshooter to see if it could find said problems, but I don't know how to fix them. Here are the messages that I received in the report:

  (1) cache of Windows store may be corrupted - no not fixed

  Reset and open Windows Store - complete

  (2) search for the missing or corrupted - files detected

  Repair missing or corrupted - files completed

  Output of the SFC

  Released: Windows Resource Protection could not start the repair service.

  (3) configuration Windows store may be damaged - detected

  Reregister Windows Store - complete

  (4) display card drivers may be outdated - detected

  Search for updated drivers-finished graphics card

  (5) registration for the Service is missing or corrupt - fixed

  Sign up for the service Reset - completed

  I'm on a 64 bit system and at a loss to know what to do as all of these applications have been working well a few days ago. To see the message "Update to 8.1 free" now, but to be able to do anything about it or may not be able to view my photos as I had been is quite frustrating. Any ideas on what to do from here?

  Hello

  I would like the links and check if that helps.

  WIN8: App: modern: Apps do not start if the default registry permissions or the file modified

   

  http://blogs.technet.com/b/askperf/archive/2013/10/11/what-to-do-if-your-Windows-8-modern-app-fails-to-start.aspx

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry: http://support.Microsoft.com/kb/322756/en-us

  Please update with the status of the issue.

• How to: retrieve deleted programs, files and images after reinstalling Vista

  Original title: I reinstalled Vista and accidentally deleted programs, files, and photos. Is it possible to recover these? Recovery program does not work.

  I had accidentally deleted a program and thought by reinstalling Vista it would bring the program back without changing anything on the computer.  By reinstalling, this because all my programs, files and images to be deleted.  I tried using the recovery program, and it goes back only to the day that I reinstalled Vista.  Is it possible to recover images, lost programs and files?

  Buna,

  You have loaded Vista again, so you will need to reinstall all your programs once again, sorry for the bad news.

  Looking through answers here, you should look to see if you have windows.old folder.

  It is information of Support engineers if you have this

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/how-do-i-recover-windowsold/7fd9ffa0-BB84-4028-ABCF-e9c7828a2775

  Other people here have said they used RECUVA free recovery program file to help find the files when they were in your place

  http://www.Piriform.com/Recuva

  Revedere.

• Not able to see the images in the Windows Vista Help file

  I use a Windows Vista operating system and I'm not able to view the images in the Windows Vista Help file... ! Here are the troubleshooting steps I tried to solve the problem:-

  1. I tried sfc/scannow and chkdski/f/r.
  2. Tried to clean boot.
  3. Tried to create a new user account.
  4. Tried in safe mode.
  5. Downloaded and installed the WinHlp32.exe file from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5143
  6. Tried running the http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx SubinACL tool
  7. I tried Startup Repair tool.

  Could you please temme then what to do? I look forward to hearing from you soon.

  Hello
  Try this for this issue:
  Equip your Windows recovery disk, then select "Reinstall partial '.»
  Check the "Winhelp" since the consolidation of program.
  Next
  Finishing
  Then restart.
  Which solves the problem?
  hope this helps,
  b Eddie

• When you try to access some programs, Windows Vista will stop and then restart

  There are some windows programs that I can't access because my computer says that windows has stopped working then he says looking for a solution and then he says: restart windows. I can't access my programs and features to remove some programs I think may be worth. I can't access MY computer optison either.

  Hi billdee,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what happens when you try to uninstall the program?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

   

  Method 3:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link

  Method 4: check the logs in Event Viewer for more information on this problem

  Open event viewer

  What are the information in event logs? (Event Viewer)

• I just replaced my hard drive. Can I replace everthing that I had saved by choosing "Restore" and it points to a saved file? Also all the Windows setting will find?

  I just replaced my hard drive. Can I replace everthing that I had saved by choosing "Restore" and it points to a saved file? Also all the Windows setting will find?

  Find all programs I had installed in C:?

  See if this tutorial will help.

  http://www.SevenForums.com/tutorials/675-system-image-recovery.html

• files and folders in the windows.old folder missing

  Recently, I updated my windows 8. (a day and a half)

  Today I was moving the content in the folder windows.old to the other locations, (4 ~ 5 h ago)

  Suddenly, after the computer has restarted, the content in the windows.old folder disappeared except for users and windows folders.

  I copy the files from windows.old/Program files and I don't know that I do not delete the folder by myself.

  I read previous posting on similar problems, but that's because they kept their too long files or their disk space was not enough.

  But I have enough space in my C drive and just refreshed 1 ~ 2 days ago.

  I did not drive or any cleaning that is.

  It is unreasonable to a system to remove the backup files after a few days without noticing.

  Please let me know how to solve this problem and to recover these files.

  There are a lot of files in the previous program files, I need to recover the precious.

  Hi Junwhan,

  Thanks for posting your query in Microsoft Community.

  I can understand the importance of data could be in the Windows.old folder and we regret the inconvenience.

  Yes, Windows 8 has a new timer feature which will automatically delete Windows.old files after a period of 4 weeks since the upgrade. The idea is to avoid the waste of space giving you plenty of time to get what you need out of the folder and delete those that sit for months or even years.

  Since it's just been 1-2 days of update process, you can activate the "hidden objects" to see if the Windows.old files appear.

  As you open the file Explorer, click view and check the hidden items

  In addition, if you use third-party antivirus program control the log of activities see if there is any action taken at the time where the files have disappeared.  Most of the antivirus program automatically deletes the default files. You can change these settings, however, it is not recommended.

  If you use the default, Windows Defender (WD) on Windows 8.1 then WD has real-time analysis allow by default. Refer to this link: http://answers.microsoft.com/en-us/protect/wiki/protect_defender-protect_start/windows-defender-on-windows-8-introduction-and/f1e00106-6687-4efe-9ec0-ed9f72fabb92

  Check the history of Windows Defender:

  1. Type of user interface modern Windows defender.

  2. Click Windows Defender.

  3. Click the history tab, and then click Details.

  4. Check Date and time if you find any virus.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• After the use of trojan killer mycaptures files did not restore completely mainly the icons in the task bar and the status bar/windows vista

  After run Trojan Killer to clean up my computer after infection the installation "captured files" did not restore my system properly, namely files connected to the bar of tasks IE icons missing also no staus bar

  Hello

  Method 1:

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Method 2: Run SFC scan.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Run system restore by keeping the computer in the boot.
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting steps, follow step 7 link to return the computer to a Normal startup mode

• Upgrade of hardware and now Windows vista will not be loaded. Stop 0x0000007B error.

  Can someone help me please.  I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b.  I tried the two loading normally and safe mode and I get the same thing.

  Can someone help me please.  I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b.  I tried the two loading normally and safe mode and I get the same thing.

  Hey Brian39

  If you change the motherboard that you normally have to reinstall vista

  your hard drive if you ever reinstalled vista contains the drivers for the old motherboard etc.

  and if vista is pre-installed you can not put the motherboard unless you do so in collaboration with the computer manufacturer

  If a retail license, you can change the motherboard

  but you will normally always reinstall vista for reasons

  Walter, the time zone traveller

• my files and images and electronic messages will not come

  Please help me to retrieve my saved files and my photos and my email messages do not come since the change in live my hotmail questions are not resolved I receive no mail and my folderss I saved are all gone and my friends are gone too, I want them back please help me and make stay them behind please to (perhaps they made me change 3 times not sure) , but is the new thank you

  elliejutt,
  What type of program you use for your email?  What has changed before the problem started (did you change of email clients, go online to Live Mail Hotmail, etc...)?  Are also the files and images that you mention in the e-mail program do you use?

  Let us know the details.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista will be preform no updates anyone can help, thank you

  Windows Vista will be preform no updates anyone can help, thank you

  Hello

  1. what happens when you try to run Windows Update? You get an error message? If Yes, what is the exact full error message?

  2. you have made no changes to the computer before the broadcast took place?

  3. is the specific question of an update?

  Method 1:

  Run Windows Update Reset (aggressive mode):

  http://support.Microsoft.com/kb/971058

  Now, restart the computer and check the update.

  Method 2:

  Run an analysis of auditor of system files on your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Download the update system analysis tool version of operating system and control accordingly.

  http://support.Microsoft.com/kb/947821

  How to check the updates failed:

  If you access windows update by clicking the Start button to in address bar type windows update and click on enter, click on updates of the review, and it will show you what that is either installed or not updated.

  If the problem remains even in collect and send the Windows Update log.

   

  Follow the below article to collect the log file:

   

  http://support.Microsoft.com/kb/902093

  Use SkyDrive download collected files and post screen/image capture

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

  Hope the above information is helpful.

• Windows Photo Gallery can not open desktop image files

  When I double click on an image file on the desktop, nothing happens.  When I right-click and choose Preview, it does nothing. also, if I choose open with: Windows Photo Gallery, nothing.

  I can add pictures in a folder, start Windows Photo Gallery and view them.

  I have never changed the default Photo Viewer, it's still the Windows Photo Viewer.

  Hi m WALID,
   
  Step 1: Try these steps and check the result.
  a. Windows Photo Gallery closed.
  b. Click Start, type %userprofile%\AppData\Local\Microsoft\Windows Photo Gallery in the search box and press ENTER.
  c. right-click Pictures.pd4 or Pictures.pd5, and then select Rename.
  d. change the name of the file for example OLD_Pictures.pd4 or OLD_Pictures.pd5
  e. open image files and check the result.
   
  Note: Photo Gallery Windows recreates the database based on the information stored in your media files and metadata. All the metadata that are not rewritten on a media file will be lost. For example, the metadata might be lost because a media file was locked or read-only.
  
  Step 2: If the problem persists, scan system file checker (SFC) to find and difficulty of the missing or corrupt system files
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully and check the result.
  c. check to see if the problem persists.
   
  Step 3: If the problem continues, check if you are able to view the image files by disabling all non-Microsoft programs to find if one of them is causing the issue
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. check to see if the problem persists.
  d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.
  
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista will not go past the loading screen

  Hey - last night my computer was working fine, I had nothing to open and was watching television, then we had a power cut, I thought everything was fine. But when I went to turn my computer on this morning he gets just stuck at the loading screen (the one with the green bars). I have tried reboot, unplug the unit and system repair, the windows vista startup disk, just. When I put in the disc, it does something together press button as I do, then it loads the files then goes back right screen loading with green bars, he done the same for any route I'm trying. I could use the help because the computer has very important files that I can't afford to lose.

  Thank you

  Try and back up your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  Good luck with it.

  Cheer.

  Mick Murphy - Microsoft partner

• SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

  SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-24 12:36

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 1241
  Found 4 errors
  CBS MUM lack count: 4

  Unavailable repair files:
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

  Hello Yiratr,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  http://support.Microsoft.com/kb/956702

  That should do the trick for you.

  Thank you.

  Kind regards

  Augustine.

  "URGO".

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO