rights management digital error error number: N8151

Digital Rights Management error error code: N8151 need a fix

Uninstall and reinstall Silverlight fix the issue?

Tags: Windows

Similar Questions

Error 0xC00D2781: A problem has occuredin retrieve digital rights management

Error 0xC00D2781: A problem has occuredin retrieve the identification of digital rights management machine.

I have consulted the Ohio eBook project using my local library card & ID. I downloaded the OverDrive WMA Audiobook software.

When I tried to download the book itself, I got the above error message & I don't know what that means or how to fix it.

Thanks for your help.

Hello

I suggest you to upgrade your Media Player security components and check if this solves the problem.

Visit the link below and click on upgrade.
http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

Kind regards
Afzal Taher
Microsoft technical support engineer

How can I reset using windows XP digital rights management when an error message appears as 0xC00D2782

I used my MP3 player to download digital books from the library using Overdirve Media Console. Recently, I received a message indicating that an error has occurred. He said that I had problems of digital rights management. The error was 0xC00D2782. I was not able to fix this problem.

Does anyone have any suggestions? I use Windows XP

You will need to contact Overdrive for assistance.

You can try to reset the DRM store, but you will lose the license for any protected media you have, and may not be able to access. Unfortunately, this may be required if Overdrive is unable to help.

http://support.Microsoft.com/kb/891664

Digital rights management with Overdrive errors

I am trying to download an audio book from the library and I get this error message from Overdrive Media: error 0xC00D2711: a problem occurred in the digital rights management component. Contact technical support for this application.

ISTT, make sure that WMP is closed, start Internet Explorer as an administrator (click right- run as administrator ), and then go to http://drmlicense.one.microsoft.com/Indivsite .

If the button is always grayed out, you will probably have to reset the DRM system, by following the instructions at http://support.microsoft.com/kb/929642 (article mainly mentions the Zune software, but can also be applied in general).

Tim Baets
http://www.BM-productions.TK

ORA-06502: PL/SQL: digital error: error in the conversion of char to number

Hello world.
I have a strange problem here. I'll try to explain better. I work with APEX 4.2 and of Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production.
Here are my parameters NLS_SESSION_PARAMETER and NLS_DATABASE_PARAMETER: NLS_NUMERIC_CHARACTERS,.

I have a table with a lot of body numbers, and when I imported a MS Access application data, all fields were imported with the comma as decimal separator.

Now, I have a form with several fields of number and when I leave a numeric field, a body of numbers of amount total is calculated and automatically filled with a bit of javascript.

Now the problem: calculating fields (sum) succeeds only when I use the decimal as the delimiter. If I use the comma, I get a NaN value in the total amount field. I managed to convert all commas in points with javascript, so the total amount is calculated.
When I try to save the record, I get the error: ORA-06502: PL/SQL: digital error: error in the conversion of char to number because I'm trying to save the separator point in my number fields.

I tried to use REPLACE function to replace the. by one, before winning but does not solve the problem.

This sounds familiar to anyone?

Thanks in advance.

OK, the problem is solved people.

Somehow, the registration procedure had an influence on another calculation of my form and the error came from this process. So I put a to_number and replace stated in the calculation and all records very well and it shows my total.

Save the attachment script gives error "Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000

Hi all

I'm completely ignorant when it comes to Apple Script and I'm trying to get this simple script to work. The purpose of the script is to save attachments in a folder named when I run on the Apple Mail messages via a rule.

This is the code:

Tell application "Mail".

theMessages set of selection

Repeat with thisMessage in theMessages

the value of the theAttachments attached to a letter of thisMessage

Repeat with thisAttachment in theAttachments

the value theAttachmentFileName ((chemin d'accès àle texte riche de la règle de type dossier de départ) & ' treatment of the Documents record: Hazel ") & name of the thisAttachment

Save thisAttachment in file theAttachmentFileName

end repeat

end repeat

tell the end

The folder does not exist, but I get a "error " Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000 "when I run.

The code in the Script Editor editor also inserts "type of rule" in my code, so I guess that my syntax is faulty.

Any help would be greatly appreciated.

Kind regards

Beem

If ' folder of treatment of Hazel ' already exists in the Documents folder, the following script of GUI, which seems to work perfectly under OS X 10.11.3, should do what you ask for:

Try

game of theDestinationFolder to ((path to the documents folder) as text) & "Hazel treatment record" as alias

on error - file does not exist

return Beep 3

end try

say application "Mail".

activate

the value theMessages to the selection

Repeat with thisMessage in theMessages

thisMessage Open

say application 'System events' to say process "Mail".

click on menu item "Save attachments...". " of 1 of the 'file' menu bar item menu of the menu bar 1

Repeat until sheet 1 window 1 is

end Repeat

key sequence "o" using { control down,shift down}

key sequence "Nutty".

click on button 'Save' of the sheet 1 of window 1

Repeat while sheet 1 window 1 is

end Repeat

key sequence 'w', using {control down} - close this message

end say

end Repeat

end say

ORA-06502: PL/SQL: digital error or value: number too high accuracy
Hi all
Sorry I can't speak English very well
========
IM creating a function in the hr schema
I need to calculate a tax
syntax of the function is

CREATE OR REPLACE THE TAX FUNCTION
(F_TAX EMPLOYEES % OF SALARY TYPE)
RETURN NUMBER IS
V_SAL EMPLOYEES. % SALARY TYPE.

BEGIN
SELECT salary * 12
IN v_sal
Employees
WHERE EMPLOYEE_ID = F_TAX;
IF V_SAL > = 40000 THEN
V_SAL: = V_SAL / 0,20;
ELSIF V_SAL > = 30000 THEN
V_SAL: = V_SAL / 0.15;
END IF;
RETURN V_SAL;
TAX END;
==================
When I select a tax I have this problem
SELECT (EMPLOYEE_ID) TAX
EMPLOYEES

It comes
SELECT (EMPLOYEE_ID) TAX
*
ERROR on line 1:
ORA-06502: PL/SQL: digital error or value: number too high accuracy
ORA-06512: at "HR. The TAX", line 16
V_SAL is declared as HR. EMPLOYEES. % OF SALARY TYPE. If you look at the definition of time. The table EMPLOYEES, the SALARY column is a NUMBER (8,2). This means that it can handle numbers up to $999,999.99 (8 total digits with 2 decimal places).

Your IF statement is dividing the salary by 0.20, which is equivalent to multiplying by 5 or dividing by 0.15, which is multiplied by 6.67. In reality, at least a salary is high enough now that when you multiply by 5 or 6.67 it exceeds the limit of $999,999.99 (especially when you already multiplied by 12 SALARY column in your SELECT statement).

-If your intention is to return in numbers that exceed the limits of the SALARY column in human resources. EMPLOYEES, you will need to declare V_SAL differently. You can declare V_SAL as a NUMBER (11.2), for example, given that any number that you store in a NUMBER (8.2), multiplied by 60, which can be represented in a NUMBER (11.2).
-If your intention is to return the numbers that fall within the limits of the SALARY column in human resources. USED, I suspect that the algorithm that you implemented is incorrect. Perhaps, for example, you would divide by 1.2 or 1.15 as a kind of tax accounting?

Justin

While trying to install AD RMS, I came across the following error message on the Installation results page: Rights Management Services Installation of Active Directory was successful with errors

Try to configure the Server Active Directory rights management failed. Exception has been thrown by the target of invocation. to

System.DirectoryServices.Configuration.ProvUtils.EnsureGroupMembership (String
strTargetComputer, String strUserName, string strGroup, Boolean, String strDomain
fShouldBeMember)
at Microsoft.RightsManagementServices.Configuration.ProvisioningBase.EnsureUser)
at Microsoft.RightsManagementServices.Configuration.ProvisioningBase.Run)
at Microsoft.RightsManagementServices.Configuration.ProvisionerBase.DoProvision)
at Microsoft.RightsManagementServices.Configuration.ProvisionerBase.Run)
to Microsoft.RightsManagementServices.Configuration.ProvisionerHelper.Run (OperationType
operationType, data object)
to Microsoft.RightsManagementServices.Configuration.ProvisionEngine.Run (OperationType
operationType, Boolean passwordEncrypted)
at Microsoft.RightsManagementServices.Configuration.CmdLineHandler.Run)
Delete and re - install AD RMS to try the implementation again.

Hi Samuel

Your question is beyond the scope of these Forums for answers. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

Directory Services Forum - Technet:
http://social.technet.Microsoft.com/forums/en/winserverDS/threads

Concerning

Windows Movie Maker "the file is protected using digital rights management and cannot be imported."

I downloaded a large .wmv file last night and have to divide into 8 smaller parts, but when I try to "import media" in Movie Maker is stipulates that "the file is protected using digital rights management and cannot be imported.

Is it possible to import the file to edit?

Turnbite removes the DRM http://download.cnet.com/Tunebite/3000-2140_4-10783040.html but I still don't know if it would work with Movie Maker (only because I haven't used products - looks like it would work, but I'm not sure). Here is a review of version 6 (the current version is 7): http://mp3.about.com/od/audiotools/fr/Tunebite_6_Rev.htm. Apparently, he's copying your DRM files and so it is required to have at least some degradation (but not a lot from what I've read - not noticeable). Because it's free, it can't hurt to try it and see if it solves the problem.

AVS looks like he got a number of good products http://www.avsmedia.com/, but I don't think that one of them address the DRM issue. I really didn't listen to music or watch videos on my PC very often so I'm not familiar with the products to do such things. May I suggest you post your question in the music and its Forum: http://social.answers.microsoft.com/Forums/en-US/vistamedia/threads , where issues of music specialists will be more than happy to help you with your questions. Or in the photos and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the video specialists will be happy to help with you project of filmmaking.

As for Shane Childs, I suspect that Karthik copied an answer, he used for this person to respond to your question and everything just forgot to change the username - just a typing error.

Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

Error number: 0x8DDD0002

Error number: 0x8DDD0002? Regds, 'a journey of a thousand miles begins with a first step."

Resolution: Error number: 0x8DDD0002

(First cause of this error is matter of Admin rights, check the necessary rights to the user you logged)

To resolve this problem, use one of the following methods. If method 1 does not resolve the problem, use method 2.
- Method 1 make sure you are connected as a user belonging to the local Administrators group.
  
  Windows XP, click Start, click Run, type nusrmgr.cpl, and then click OK to open the user accounts window.
  
  If you are part of a network domain, follow these steps:
  1. In the window comptes accounts users, select your account from the list, and then click Properties.
  2. On the group membership tab, make sure you are in the Administrators group.
  If you are not part of a network domain, follow these steps:
  1. In the window user accounts, click your account, and verify that computer administrator appears under your account name.
  Windows 2000
1. Click Start, click Run, type compmgmt.msc, and then click OK.
2. In the computer management window, expand System Tools, expand users and groups, and then click the users folder.
3. In the right pane of the computer management window, right-click the user that you want to check user rights, and then click Properties.
4. On the Member tab, verify that administrators is listed in the Member of the zone.
After you logged on as administrator, try to visit the Windows Update Web site or the Microsoft Update Web site again. If the problem is resolved, do not troubleshooting.
Method 2, delete the temporary Internet files. To do this, follow these steps:
1. Open the Internet Explorer window, click Tools, and then click Internet Options.
2. In the Internet Options window, click the general tab, under temporary Internet files, click on delete files and then click OK.
Try to visit the Windows Update Web site or the Microsoft Update Web site again. If the problem is resolved, do not troubleshooting.
Method 3 check the permissions on the registry keys that are used by the Windows Update client and the Microsoft Update client.
1. Click Start, run, type regedit, and then click OK.
  
  Note in Microsoft Windows 2000 or Microsoft Windows NT 4.0, type regedt32 instead of "regedit."
2. Locate and select the following registry key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate
3. On the Edit menu, click permissions, click Add, and type everyone in the dialog box that appears.
  Note in Windows 2000 or Windows NT 4.0, click permissions on the Security menu.
4. Click on check names and then click OK.
5. In the list of group or user names, select everyone.
6. Under permissions for everyone, click to select the full control check box in the column allow.
  Notice that the check box in the Allow column reading is now also selected.
7. Select each user, in turn, in the group or user names list, and check that no boxes are ticked in the column deny. Clear the check boxes are selected in the column deny.
8. Click Advanced, click to select replace them permission on the child objects checkbox entries everything and then click OK.
9. Click YES if you are prompted to confirm, and then click OK to close the dialog box.
Try to visit the Windows Update Web site or the Microsoft Update Web site again. If the problem is resolved, do not troubleshooting.
Method 4 check the permissions for you on the folder structure used by the Windows Update client and the Microsoft Update client.
1. Click Start, click Run, type Explorer, and then click OK.
2. Expand my computer, expand the system drive, then WINDOWS.
3. Right-click C:\Windows\SoftwareDistribution, and then click Properties.
4. In the C:\Windows\SoftwareDistribution Properties window, click the Security tab and check that you are in the group or user names list.
5. In the group or user names list, select everyone. Under permissions for everyone, click to select the full control check box in the column allow.
  Notice that the check box in the Allow column reading is now also selected.
Try to visit the Windows Update Web site or the Microsoft Update Web site again. If the problem is resolved, do not troubleshooting.
Method 5 rename the Catroot2 folder. To do this, type the following commands at a command prompt, pressing ENTER after each line:
net stop cryptsvc
Ren %systemroot%\system32\catroot2 oldcatroot2

Then, try to visit the Windows Update Web site or the Microsoft Update Web site again. If the problem is resolved, do not troubleshooting.

Method 6 rename the folder C:\Windows\SoftwareDistribution. To do this, follow these steps.
1. Restart the computer in safe mode.
2. Locate and then rename the folder drive: \Windows\SoftwareDistribution in SoftwareDistribution.old.
  Note Drive is a placeholder for the system drive.
3. Restart the computer in Normal mode.

Kind regards
Sohail Patel

Regds, 'a journey of a thousand miles begins with a first step."

SQL plan management unpack error
Hi all

Facing a problem in SQL Plan Management.

Packed dba_sql_plan_baselines table in table called "test_baseline_14july" and exported from the source schema.

Subsequently imported the same table in the target, now when the following error unpacking based m

SQL > DECLARE
number of my_plans;
BEGIN
my_plans: = DBMS_SPM. UNPACK_STGTAB_BASELINE (table_name = > 'test_baseline_14july');
END;
/

ORA-06502: PL/SQL: digital error or value
ORA-06512: at "SYS." DBMS_SMB', line 1024
ORA-06512: at "SYS." DBMS_SPM', line 2933
ORA-06512: at line 5

The source DB: 11.2.0.2
Destination DB: 11.1.0.6

Let me know what is the problem?

Thanks in advance!
All it seems a little weird. You can think of to raise a ticket with the Support of Oracle.

In the source database, can you show the output of
```
SELECT * FROM v$version;
SELECT * FROM dba_sql_plan_baselines;
SELECT * FROM test_baseline_15july_2;
```
In the destination database, can you show the output of
```
SELECT * FROM v$version;
SELECT * FROM test_baseline_15july_2;
```

Error number: 70 Error Description: permission denied
Hi all
I just finished to set up a new development environment.
I created a new application and then I registered it.
Now, I'm trying to load the metadata, rules...
But whenever I try to load or extract something (what ever the metadata, rules, WDEF...) HFM returns me the following error:

Error number: 70
Error Description: permission denied
Source: Microsoft VBScript runtime error
Page Occurred:/hfm/DocMgr/ExtractItems.asp error (if I try to extract something)

It doesn't happen when I try to load something of the workspace so that if I load that is metadata on the client, it seems to work correctly.

What can I do to solve the problem?

Pleas help me! It's urgent!

Thanks in advance
Giacomo
Hi Giacomo.

See below:

* Financial management error "Error number: 70 Error Description: Permission denied ' when load or save objects [596447.1 ID] *.
--------------------------------------------------------------------------------
Last updated January 17, 2011 Type PROBLEM status PUBLISHED
--------------------------------------------------------------------------------
Applies to:
Hyperion Financial Management - Version: 3.5.1.0.00 to 11.1.1.0.00 - version: 3.5 to 11.1

Symptoms:
Web error message appears during the loading or saving of data entry forms:

Error:
An error has occurred. Please contact your administrator. "
Error number: 70
Description of error: permission denied
Error source: microsoft VBScript runtime error
Page Occurred:/hfm/data/WebFormBuilder.asp error

This error can also be seen run any load or save the task of HFM, for example loading log data, although the Page on which error occurred will change depending on what task is underway.

* Cause: *.
This problem is caused by the NTFS permissions on the folder to transfer files on the Web of HFM server and can be verified by giving everyone in the control group full access to the FileTransfer file as a test. Normally this question will require the Internet Guest account and the IIS user launch to have full access for the file to transfer files on the HFM Web server.

* Solution: *.
On the HFM Web server

Check the value of the FileTransferFolderPath value data in the Windows registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\Hyperion financial Management\Web
In Windows Explorer, navigate to the folder you specified in the above registry, right click on the name of the folder and select Properties, then the Security tab.
Give full control permissions to the account invited Internet and process account IIS to launch users.
Click on apply.
If the modifications above do not resolve the user of HFM DCOM assignment question try as the identity of the anonymous access in IIS:

Start the Internet Information services Manager console
Explorer the DefaultAppPool, right-click and select "Properties".
Go to the "Identity" tab, select "Configurable" and change the user identity to match that of the HFM DCOM user used when installing HFM.
Click on apply and OK
In addition foret forest down to the Web Site of HFM, right-click and select "Properties".
Go to the "Directory Security" tab
In the "authentication and access control', click 'change '.
For "anonymous" access change the username/password of the HFM DCOM user credentials
Click OK, OK
Restart the IIS services

Send me a note if you continue to experience problems after you apply this configuraration.

G'Luck
-David

When I try to use Windows Update, I get an error message when it tries to check the updates. I get the following error code [error number: 0 x 80070424]

I get the following message

Also get the red shield with X saying if off automatic updates.

Tried fixing it by going to control panel, but it does not allow me to change the settings

[Error number: 0 x 80070424]

The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

For self-help options:

To support options:

Microsoft online assisted support (no cost for Windows Update issues)

Hi, I found the answer! Right click; Start, then on run, copy and paste this command, click OK. Problem solved!

Bill

% SYSTEMROOT%\SYSTEM32\REGSVR32. EXE, % SYSTEMROOT%\SYSTEM32\WUAUENG. DLL

When I try to install Microsoft Update (as opposed to using Windows Update), I get the error number: 0 x 80070002

When I try to install Microsoft Update (as opposed to using Windows Update), I get the error number: 0 x 80070002

Hello

Look in Control Panel - updates of Windows to see what is the KB and post it here. It can indeed not necessary it and
be able to make a right click on it and HIDE. Let us know what the update is so we can help advise.

Also, if you don't need it you can try to download it here.

Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
http://www.Microsoft.com/downloads/en/default.aspx

Download - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR

If you need to fix the error:

Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
http://support.Microsoft.com/kb/956698

Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

Fix Error 80070002 when using Windows Update in Vista
http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
http://support.Microsoft.com/kb/910336

Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
http://support.Microsoft.com/kb/956698

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Error number: 0 x 80070424 when you try to use windows update

When you try to use windows update I get this error: error number: 0 x 80070424. In addition, automatic updates in Security Center is disabled, and I can't activate it.

RichardTensing,

Try other steps mentioned in the article

http://support.Microsoft.com/kb/2509997

`~`

http://support.Microsoft.com/kb/968002/>

`~`

If no joy, click the round to start, in the search in field type

cmd

Right-click on cmd.exe and select ' run as to administer. Follow the prompts to allow the command prompt to run.

At the prompt, type it below, and press ENTER after * each * command

regsvr32 c:\windows\system32\wuaueng.dll

output

Restart the system and see if it can be updated now.

04/27 / 1107:46: 36 am

rights management digital error error number: N8151

Similar Questions

Maybe you are looking for