RINIT.exe: he executed and crashed my computer

Similar Questions

• Whenever I try to delete a file or display a folder, explorer.exe keeps freezing and crashing.

  Hello

  Whenever I try to delete a file or display a folder, explorer.exe keeps freezing and crashing. I tried SFC/scannow, and he found that he could not repair the corrupted files. I also tried to use a boot disk to fix my OS, but he said he had "no problems found".
  Please answer as soon as POSSIBLE. Thank you.

  Use chkdsk /f and sfc/scannow and reboot several times.

  Sometimes it takes more pases.

• 38.0 update is slow, often unresponsive and crashes my computer. Is there a known problem?

  Updated Thunderbird automatically updated last week. It crashed my computer (not only the program) whenever new e-mail notification area came. I have disabled notifications. This helped, but if my computer loses its connection to the internet, Thunderbird crashes. The program is incredibly slow and unstable. When I click on an email, I find myself with parts of two windows. Finally, the system catches up and the screen looks very good. If I try to write an email, I get again some parts of two windows until it catches up.

  Thunderbird has been among my favorite of all time programs. I have used it for years and have never had any problems until this update. Help!

  Theresa, sorry for the delay. KenHowieStudios said

  Thank you for your suggestions. The problems disappeared when the computer (Windows 7) and Thunderbird have started/opened in safe mode. What should I do next?

  Theresa, sorry for the delay.

  Disable hardware acceleration options | Advanced | General
  Who help me?

• Cut random downs and crashes. Computer laptop closing at startup. No virus, what is - this?

  A few months my computer has been acting crazy. Lately, it is essential, it is closed right after it starts. Another thing, it tends to do is to enter a State of low power (not in standby or Hibernate), with all the lights and power always, by discoloration to a black screen. I tried every key sequence to bring my screen, but it never does, so I find myself manually shut down my computer in now the power button. Last night I shut down my computer and as I turned it on this morning I had the 'blue screen of death '. I have no virus and I'm starting to think that this has something to do with the inner workings of my computer (things that I have no idea about). I don't know if I need new drivers, need to clean my registry, I've already defragged my computer, or if I have a chance to save my laptop.

  I also don't have any specs on my computer and don't know how to find them or the other. These problems that I said start to become a great inconvenience, but I have a bunch of stuff saved on my computer, so it is difficult for me to move on to the other laptop I have for my daily use. ANY help would be greatly appreciated, I'm desperate!

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  To be able to remove ALL and reinstall all the cables (both ends), card and memory - really remove
  and replace - do not just tight. Remove the dust bunnies and clean the vents. Check that the
  fans of work (before and after opening the case). If a laptop on what you can do is reinstall
  memory and clean the ventilation openings (still may try to add a small fan as a test).

  ===========================================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  You can use Mode without fail - repeatedly tap F8 that you start?

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Player 10 and especially does not open and crashes my computer

  When I try to open Player 10 and above, it opens the splash screen but then crashes my whole computer. I uninstalled and reinstalled several times but still the same thing. I need to force close the computer with the power button down until the release. Reader 9 and below worked well, but I only find the version more.

  Version 10 and above all are more compatible with XP. The original version of 10, but I believe that compatibility has been removed when Microsoft dropped support.

• My msn email crashes (and crashes my computer) whenever I open it for the first time. It is also very slow to open my messages.

  Windows xp sp 3

  3.25 GB of RAM

  Pentium 4

  3.20 ghz

  MSN c. 10.2

  Hi vic238,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         The question is limited to the MSN email?

  ·         What web browser do you use?

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

• We purchased Adobe CS3 contribute and crashed the computer, I installed it on that

  How can I get the product to load on my new computer?

  If you follow the 7 steps you can dl the trial here: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  activate with your serial number.

  If you have a problem with dl, you don't follow all 7 steps.  Re-read and try again.

• After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista

  After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing.  It is on a Toshiba Satellite running Vista

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ------------------------------------------------------------------------------------------

  If no joy, see Toshiba Support and/or their forums:

  Toshiba support and drivers
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Support Forums
  http://laptopforums.Toshiba.com/

  Contact Toshiba
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• Blue screen error crash, caused by drivers: ntoskrnl.exe, Wdf01000.sys and tcpip.sys

  original title: Blue error screen, accident of death caused by drivers: ntoskrnl.exe, Wdf01000.sys and tcpip.sys

  I currently own an Aura of Alienware Dell, it's an amazing computer. The only problem is that I had a lot of problems, I was able to permanently fix all except this issue. I'll randomly crash blue screen, usually it doesn't happen often and it is normally not triggered by something specific, rarely it will crash at startup. I was able to download an application that can read the cache/dump blue screen crashes:

  34 accidents

  one was caused by Wdf01000.sys

  three was a result of tcpip.sys

  and all the rest of ntoskrnl.exe

  I don't know what caused it, I've had this computer for about a year now and I've never had this problem before. I don't remember an update of the cause, or by downloading any strange apps, downloads or viruses. (I had wiped my computer about 3 months ago)

  I don't know too much about software,

  Any help is appreciated.

  Hi bloo532,

  1. what application did you use to read dump files?

  2. did you of recent changes on the computer?

  It resembles that of the driver on the computer is causing the blue screen.

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Also make sure that all drivers are up to date on the computer.

  See the link below and try them the steps mentioned, check if it helps.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

   

  If the previous step fails, then you will need to provide the minidump files.

  Use SkyDrive download collected files and after shot/screenshot.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Acrord32.exe (Windows 7 and Acrobat cc) breaking, can not save the changes, Windows Explorer crash earlier

  Recently decided to upgrade to Acrobat DC after discovering that she will allow me to OCR files that previously forced me to spend of TIFF, and then back.

  I downloaded the program and installed today.  I was the conversion of Acrobat 9.  After that I started uninstalling Acrobat 9 Pro, Windows Explorer has started crashing.  I finally restored the computer

  I checked the Microsoft forums to see what could have gone wrong, and they seem to indicate that I should run sfc in the prompt, then see if there are problems in the registry. Here, of course, began with today or yesterday (which doesn't make sense - not sure that the report gave me irreparable files, or both fixed and fixed, or what). Other research suggests that I do a disk cleanup, and since then I had the problem of Windows Explorer.

  I tried then just install Acrobat DC on Acrobat 9.  This seemed to work properly.  However, now I have problems with Acrobat to crash (although the window remains open?). The message says that acrord32.exe is the culprit.  In addition, a number of my PDF files cannot be replaced - if I want to save my changes, I have to save to a different folder, delete the old file and move the other in its place.

  It's basically a nightmare, and I lost a ton of productivity today putting out fires.  Do not have these problems until I started playing with Acrobat.

  Please give me some suggestions.

  Thank you

  In fact, I could hope to find the solution on this thread:

  Adobe Reader DC contains errors and crashes with Windows Server R2 2012

  Going to see how it goes with the preview pane disabled (although she will suck if I can't use TI - hope you guys who patch).

  Also, add a folder by the instructions under C:/User / [USER] / AppData.

  In the hope that this problem will be solved in between.

  EDIT: It looks like it fix the problem.  Acrobat Pro DC now works without any problem.

• Want 700: updates crashed our computer and stole our windows key. :(

  Our computer decided that he did not like the updates on May 11 and crashed in the middle. We have refreshed our system, everything is back with the exception of our windows key. It tells us that we activate when it was already active before the crash.

  Finally got through HP through Facebook, and my problem was solved. I discovered that the purchase by a box like best buy store would put me in a group activation key. Because it is the key that has been registered in the BIOS, and I sent the screenshots of my activation which turned bad, they sent me a key and me were resolved with two e-mails and a very favourable CSR FB

• Several locks and crashes as a pop - up "Plugin - Container.exe Fault.

  Original title: I GET a "PLUGIN-CONTAINER. EXE ERROR POP UP, WHAT SHOULD I DO

  MY SYSTEM IS ALMOST READY TO COME OUT AND BE BEATEN TO DEATH! SORRY, I HATE THE IDEA, TOO. BUT MY COMPUTER IS BLOCKING ME AND FREEZES SEVERAL TIMES A DAY... /... I GET A POP UP STATING THAT THERE IS A PROBLEM WITH "" PLUGIN-CONTAINER. "." "" EXE"IF I REMOVE THE" WINDOWS TASK MANAGER "THINGS A LITTLE QUIET. THERE IS A PROBLEM I DON'T KNOW WITH THE "PLUGIN-CONTAINER. PROGRAM "EXE". I'M HOPING SOMEONE ELSE HAS HAD THIS SAME PROBLEM, IT REALLY SEEMS TO SLOW DOWN MY COMPUTER.
  WHAT IS "PLUGIN-CONTAINER. EXE AND ALSO WHAT THE CSRSS PROCESS. EXE PROGRAM?, AND CAN I REMOVE IT OR WHAT? I would REALLY like TO BE the ONE TO CONTROL THIS COMPUTER... FOR ONCE, THANK YOU E.S.POTTS

  Hi Eric,.

  Using Mozilla Firefox?

  If so, this is a plugin for the Mozilla browser

  You can read about it on: http://support.mozilla.com/en-US/search?os=1&fx=1&q=plugin-container.exe

  Kind regards

  Houta Bolduc

  www.techquery.in

• When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

  • When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

  Hello LisaQuaranto,

  I suggest that you configure the computer to start in minimum mode, download the update from the Download Center and try to install the update.

  To perform a clean boot on a computer that is running Windows Vista:

  a. Click Start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  b. on the general tab, click Selective startup.

  c. under Selective startup, clear the check box load startup items.

  d. click OK.

  e. When prompted, click on restart.

  f. after the computer starts, check if the problem is resolved.

  If your problem is resolved after the clean boot, and then follow the steps in the following article to narrow down the exact source:

  http://support.Microsoft.com/kb/929135

  In addition, refer to the section on how to restore your computer to a Normal startup mode by following the steps under "Reset the computer to start as usual", after performing the clean boot troubleshooting.

  You can download the update following the link below:

  http://support.Microsoft.com/kb/968930

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• When not in Windows service will change screen what ever I've sat and that he go the first screen where it asks who is connect and it crashes my computer

  original title: security

  Here's the question-problem: when not in use Windows will change screen what ever I've sat and go the first screen where it asks who is connect and it crashes my computer. All I have to do is click on the little box that says locked and I go back to what I was doing. I don't want to do this. I have magic jack phone service and when she did this, I do not get calls? Is it possible that turns off. I have only one user of this computer.

  Go to Start\Control Panel\Hardware and Sound\Power Options\Edit the parameters of the Plan

  Change the option put the computer to sleep time forever!

• The event GWX.exe messages must remain on the computer after you made the reservation for a copy and agree to receive their copy?

  The event GWX.exe messages must remain on the computer after you made the reservation for a copy and agree to receive their copy?  It certainly is learning to be OVERLOAD on these messages and would like to know if it is OK to remove them and what to do to STOP these messages.  I asked the program and I've been accepted/approved/reassured that will ship a copy - JUST WANT TO KNOW IF I CAN REMOVE THIS sort of THINGS NOW, OR should she REMAIN ON MY COMPUTER?  It's the only question I have that needs to be answered. Thank you

  ybliku2

  Since early may, Microsoft began providing updates prerequisite for these systems for the upgrade. Known as the get Windows 10 app (GXW) this KB update installs the mechanisms to verify your system readiness and download Windows 10 through Windows Update. Users will see a notification added to the taskbar allowing users of the availability of the operating systems and of the possibility to book the update and download automatically on July 29^th 2015.

  You can also download Windows 10 as one. ISO file and do the upgrade manually:

  How to: upgrade previous versions of Windows using the file ISO for Windows 10