RMAN error 6429

Similar Questions

• Do not go out on backup RMAN error

  Hi friends,

  In our production Nagios is configured and for RMAN backup error a query defined for check ' SELECT COUNT (*) FROM v$ rman_status status WHERE! = 'COMPLETE' AND status! = 'RUNNING' start_time AND > sysdate-3 "."

  But in above question his move upward.

  I also checked up on the side of the database manually his hanging the session that no output is coming.

  Also, I changed the query slightly to get the result ' select count (*) from V$ RMAN_STATUS where operation = 'SAVE' and nvl (status, 'X') not in ('DONE', 'CURRENT') and start_time > = trunc (sysdate - 3);  but the same produce no output

  Please tell me how to get the result for the last 3 days of our days.

  Version of DB - 11.2.0.2

  Kind regards

  Arya

  Hi all

  Thanks for your reply.

  I changed the query in Nagios taking the view v$ rman_backup_job_details. Its working fine.

  Kind regards

  Arya

• RMAN error

  Hello everyone

  I'm new to the rman recovery

  my script as below

  run

  {

  allocate channel c1 type disk;

  allocate channel c2 type disk;

  allocated channel c3 type disk;

  @/ rman_bkp/db_script.sql;

  restore the database;

  switch datafile;

  recover the database;

  output channel c1;

  output channel c2.

  output channel c3.

  }

  file db_script. SQL I gave commands below

  the value of newname for datafile 352 to ' / ebsapps/uatdb/uatdata/system09.dbf';

  the value of newname for datafile 353 to ' / ebsapps/uatdb/uatdata/system08.dbf';

  the value of newname for datafile 354 to ' / ebsapps/uatdb/uatdata/system11.dbf';

  the value of newname for datafile 379 to ' / ebsapps/uatdb/uatdata/undo01.dbf';

  the value of newname for datafile 392 to ' / ebsapps/uatdb/uatdata/a_txn_data01.dbf';

  the value of newname for datafile 393 to ' / ebsapps/uatdb/uatdata/a_txn_ind01.dbf';

  the value of newname for datafile 394 to ' / ebsapps/uatdb/uatdata/a_ref01.dbf';

  the value of newname for datafile 395 to ' / ebsapps/uatdb/uatdata/a_int01.dbf';

  the value of newname for datafile 396 to ' / ebsapps/uatdb/uatdata/a_summ01.dbf';

  the value of newname for datafile 397 to ' / ebsapps/uatdb/uatdata/a_nolog01.dbf';

  the value of newname for datafile 398 to ' / ebsapps/uatdb/uatdata/a_archive01.dbf';

  the value of newname for datafile 399 to ' / ebsapps/uatdb/uatdata/a_queue01.dbf';

  the value of newname for datafile 400 to ' / ebsapps/uatdb/uatdata/a_media01.dbf';

  the value of newname for datafile 401 to ' / ebsapps/uatdb/uatdata/a_txn_data02.dbf';

  So my question is when I run the rman script he ever read the file

  get error below

  RMAN-00558: error occurred during parsing of order entry

  RMAN-01006: error reported during the analysis

  ' RMAN-00556: could not open CMDFILE ' / rman_bkp/db_script.sql; »

  and beginning of restoration in the default path.

  Why it happened I give chmod and chown every thing. ?

  I found the error need to delete ';' after the script in the rman script file

• RMAN errors

  I get below error while trying to restore the database. Please let me know where I made mistakes.

  RMAN > RUN

  2 > {}

  3 > STARTUP NOMOUNT

  4 > SET until TIME ' TO_DATE (31 July 14 09:24 ', "DD-MM-YY HH24:MI:SS");

  5 > restore controlfile to ' E:\EffTemp\RMAN_CONTROL. RMAN';

  6 > startup MOUNT;

  7 > RESTORE database;

  8 > RECOVER DATABASE;

  9 > ALTER DATABASE OPEN RESETLOGS;

  {10 >}

  connected to the database target (not started)

  Oracle instance started

  Total System Global Area 2622255104 bytes

  Bytes of size 2258072 fixed

  1946159976 variable size bytes

  654311424 of database buffers bytes

  Redo buffers 19525632 bytes

  executing command: SET until clause

  From restoration to the 31 July 14

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the restore command to 31/07/2014 11:55:29

  ORA-01507: database not mounted

  Try this use of it, you must format the date type and then use set until:

  RMAN > RUN

  {

  SHUTDOWN IMMEDIATE;

  STARTUP NOMOUNT;

  RESTORE AUTOMATIC BACKUP CONTROLFILE;

  stop immediately;

  bootable media;

  SQL "alter session set NLS_DATE_FORMAT = 'My JJ YYYY HH24:MI:SS' ';"

  Up to THE TIME "November 19, 2018 21:30 ';"

  RESTORE THE DATABASE;

  RECOVER THE DATABASE;

  SHUTDOWN IMMEDIATE;

  BOOTABLE MEDIA;

  }

• Backup using RMAN error

  HI good day,

  I'm under oracle 11g on windows, as I am new to oracle database im practicing in my pc.

  When I practice I came across an error

  While taking ArchiveLog backup

  I did these steps

  RMAN > backup alchive connect all;

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-00558: error occurred during parsing of order entry

  RMAN-01009: syntax error: found 'identifier': expected an a: ' archivelog, too. "

  auxiliary, backupset backup, channel, check, controlfilecopy, copies, copy, cu

  mulative, common, database, data, db_file_name_convert, datafilecopy, db_re file

  covery_file_dest, diskratio, duration, filesperset, force, unit, format,.

  Since, full, incremental, keep maxsetsize nochecksum, noexclude, nokeep, p

  OOL, proxy, recovery, re-use, section, readonly jump, jump, spfile, tablespace, t

  AG, in, validate (")

  RMAN-01008: the identifier of the AfDB was: alchive

  RMAN-01007: line 1 column 8 file: entry standard

  This is the error that I had can someone help me solve this problem

  thanking you in advance

  Prakash

  Hello

  The problem is the syntax:

  Examples:

  RMAN > ARCHIVELOG BACKUP ALL.

  RMAN > delete any backup archivelog entry;

  Note: This save your archive and delete them;

  BACKUP DATABASE MORE ARCHIVELOG;

  Note: This will backup your database and your archive without deleting the archives.

  I hope this help you

  Concerning

• RMAN ERROR - 06428

  I changed a db in archivelog noarchivelog mode because there was a problem with archivelog (no free space in the destination of recovery)

  The problem comes when trying to run backup script backup.

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure to allocate command at 24/09/2013 14:55:54

  RMAN-06428: recovery catalog is not installed

  The problem comes when trying to run backup script backup.

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure to allocate command at 24/09/2013 14:55:54

  RMAN-06428: recovery catalog is not installed

  Any idea?

  Hello

  Connect to the database as the owner of the catalog schema and issue this query:

  SELECT db_key, db_id FROM db WHERE db_id = 12345639687;

  DB_ID DB_KEY

  ---------- ----------

  12345639687 XXXXXXX

  Then, run the following package:

  SQL > execute dbms_rcvcat.unregisterdatabase (xxxxxxx, 12345639687);

  After that, you can save the database again.

  This my idea

  Thank you

• Band RMAN error

  Hello
  
  I need help to solve the following problem with RMAN backup.
  
  

  «"ORA-19506: failed to create the batch file, name ="Datafile6_DatabasePRD", parms ="»
  ORA-27028: skgfqcre: sbtbackup returned the error
  ORA-19511: error received from layer media manager, error text:
  The backup file already exists: Datafile6_DatabasePRD (100:110:2)

  the database is 11.2.0.2 on HP - UX.
  
  The backup script is;
  

  BACKUP DATAFILECOPY FROM TAG 'INCREMENTAL' FORMAT 'Datafile%f_Database%d';

  Error logs:
  

  channel t6_tape_backup: starting piece 1 at 13-JAN-13
  RMAN-03009: failure of backup command on t1_tape_backup channel at 01/13/2013 11:12:51
  ORA-19506: failed to create sequential file, name="Datafile6_DatabasePRD", parms=""
  ORA-27028: skgfqcre: sbtbackup returned error
  ORA-19511: Error received from media manager layer, error text:
     The backup file already exists: Datafile6_DatabasePRD (100:110:2)
  channel t1_tape_backup disabled, job failed on it will be run on another channel
  RMAN-03009: failure of backup command on t2_tape_backup channel at 01/13/2013 11:12:51
  ORA-19506: failed to create sequential file, name="Datafile4_DatabasePRD", parms=""
  ORA-27028: skgfqcre: sbtbackup returned error
  ORA-19511: Error received from media manager layer, error text:
     The backup file already exists: Datafile4_DatabasePRD (100:110:2)
  channel t2_tape_backup disabled, job failed on it will be run on another channel
  RMAN-03009: failure of backup command on t3_tape_backup channel at 01/13/2013 11:12:51
  ORA-19506: failed to create sequential file, name="Datafile1_DatabasePRD", parms=""
  ORA-27028: skgfqcre: sbtbackup returned error
  ORA-19511: Error received from media manager layer, error text:
     The backup file already exists: Datafile1_DatabasePRD (100:110:2)
  channel t3_tape_backup disabled, job failed on it will be run on another channel
  RMAN-03009: failure of backup command on t5_tape_backup channel at 01/13/2013 11:12:51
  ORA-19506: failed to create sequential file, name="Datafile2_DatabasePRD", parms=""
  ORA-27028: skgfqcre: sbtbackup returned error
  ORA-19511: Error received from media manager layer, error text:
     The backup file already exists: Datafile2_DatabasePRD (100:110:2)
  channel t5_tape_backup disabled, job failed on it will be run on another channel
  RMAN-03009: failure of backup command on t6_tape_backup channel at 01/13/2013 11:12:51
  ORA-19506: failed to create sequential file, name="Datafile5_DatabasePRD", parms=""
  ORA-27028: skgfqcre: sbtbackup returned error
  ORA-19511: Error received from media manager layer, error text:
     The backup file already exists: Datafile5_DatabasePRD (100:110:2)
  channel t6_tape_backup disabled, job failed on it will be run on another channel
  channel t7_tape_backup: starting compressed full datafile backup set
  channel t7_tape_backup: including datafile copy of datafile 00006 in backup set
  input file name=+FLASH_DG/PRDstby/datafile/wpslog.3510.803139043
  channel t7_tape_backup: starting piece 1 at 13-JAN-13
  channel t8_tape_backup: starting compressed full datafile backup set
  channel t8_tape_backup: including datafile copy of datafile 00004 in backup set
  input file name=+FLASH_DG/PRDstby/datafile/wps.3509.803139043
  channel t8_tape_backup: starting piece 1 at 13-JAN-13
  RMAN-03009: failure of backup command on t4_tape_backup channel at 01/13/2013 11:12:51
  ORA-19506: failed to create sequential file, name="Datafile3_DatabasePRD", parms=""
  ORA-27028: skgfqcre: sbtbackup returned error
  ORA-19511: Error received from media manager layer, error text:
     The backup file already exists: Datafile3_DatabasePRD (100:110:2)
  channel t4_tape_backup disabled, job failed on it will be run on another channel
  RMAN-03009: failure of backup command on t7_tape_backup channel at 01/13/2013 11:12:52
  ORA-19506: failed to create sequential file, name="Datafile6_DatabasePRD", parms=""
  ORA-27028: skgfqcre: sbtbackup returned error
  ORA-19511: Error received from media manager layer, error text:
     The backup file already exists: Datafile6_DatabasePRD (100:110:2)
  channel t7_tape_backup disabled, job failed on it will be run on another channel
  released channel: t1_tape_backup
  released channel: t2_tape_backup
  released channel: t3_tape_backup
  released channel: t4_tape_backup
  released channel: t5_tape_backup
  released channel: t6_tape_backup
  released channel: t7_tape_backup
  released channel: t8_tape_backup
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03015: error occurred in stored script weekly_backup
  RMAN-03009: failure of backup command on t8_tape_backup channel at 01/13/2013 11:12:52
  ORA-19506: failed to create sequential file, name="Datafile4_DatabasePRD", parms=""
  ORA-27028: skgfqcre: sbtbackup returned error
  ORA-19511: Error received from media manager layer, error text:
     The backup file already exists: Datafile4_DatabasePRD (100:110:2)

  This seems reasonable. It worked when you tried?

• RMAN error code

  Hi all
  
  rman, we can check the details of backups is complete or failed with V$ RMAN_BACKUP_JOB_DETAILS and v$ RMAN_STATUS views.
  If it is a failed State is it a request to get this code in the database or we must depend on the papers only. currently I don't have newspapers to get the error code.
  
  Thank you very much...

  Hello

  You can use v$ rman_ouput.
  Note: The rman_output view v$ focuses on memory so it will not persist to a restart of the database (IE will not recorded in the controlfile). The display can contain 32768 lines.

  If you want to keep all the data in v$ rman_output you have 3 option:
  1. use the RMAN CATALOG on the different database.
  2. use a trigger on the view RMAN_OUTPUT V_$ to keep track of all the backup on a separate table information
  3. use a RMAN catalog on the same database only for this purpose (not recommended)

  See this example:
  http://www.dbspecialists.com/blog/database-backups/using-vrman_output-to-review-your-backups/

  Published by: Levi Pereira on November 9, 2012 14:58

• RMAN error: ora-12705 while testing on the tape with EMC networker backup 7.63

  We failed with our script, rman with the following error. Version of the OS is redhat linux 5. DB version is 11.2.0.3
  
  Recovery Manager: release 11.2.0.3.0 - Production on Wed Sep 22:50:48 5 2012
  Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
  
  RMAN > Connect target *;
  2 > #rman target / < < EOF
  3 > #rman target;
  4 > run {}
  5 > configure the parallelism of peripheral band type 4;
  6 > ALLOCATE CHANNEL ch1 TYPE 'SBT_TAPE ';
  7 > allocate Ribbon type channel ch2.
  8 > allocate Ribbon type channel ch3;
  9 > assign the channel type Ribbon ch4;
  10 > allocate Ribbon type channel ch5.
  11 > configure controlfile autobackup on;
  12 > configure the type of backup device type Ribbon backupset compressed;
  13 > INCREMENTAL LEVEL 0 BACKUP copy the TAG "fullcopy_prd" DATABASE
  14 > CHANNEL ch1.
  15 > CHANNEL ch2.
  16 > CHANNEL ch3;
  17 > CHANNEL ch4;
  18 > CHANNEL ch5.
  {19 >}
  20 > {EXECUTION
  21 > ALLOCATE CHANNEL ch1 TYPE 'SBT_TAPE ';
  22 > SAVE that copy ALL ARCHIVELOG;
  23 > SAVE that copy CURRENT CONTROLFILE;
  24 > CHANNEL ch1.
  25 > crosscheck backup;
  26 > delete NOPROMPT obsolete FORCE.
  {27 >}
  28 > "exit";
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  ORA-12705: cannot access files of NLS data or invalid environment specified
  
  Complete recovery manager.
  
  The seller of bands is EMC networker 763. There are other other aix hosts running prod db supported by the same provider, we tried their script on the linux host, we got an exact same error.
  
  I wonder if I should setup NLS enviornment. but the emc network operates by setting variables in a config file in / etc /. He did information non-specific nls.
  
  Does he know this seller and this problem, please help me solve the problem.
  
  Thank you in advance.

  982335 wrote:
  RMAN-06583: at least 1 channel of TYPE DISK must be distributed to use the COPY AS option

  Since I was on backup as copy. So backup copy won't work on the Strip?

  Hello

  No, you can't backup as copy directly to tape.

  Don't know if it works but try this

  1. first copy the disk backup
  2. then backup datafilecopy all tape

  See you soon

• Ora-19809 RMAN error

  Hi the gems...
  
  I take rman backup of my database...
  
  RMAN
  connect the target
  backup database;
  
  but he showed an error
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 29/05/2011 18:39:
  37
  ORA-19809: limit exceeded for file recovery
  ORA-19804: cannot retrieve 52428800 bytes of 2147483648 limit disk space
  
  
  pls help... Thanks in advance

  It seems that you have enabled the FLASH RECOVERY AREA,

  Check the free space, make sure that there is enough free space and then run again.

  ALTER system set db_recovery_file_dest_size =;

  Published by: CKPT on May 29, 2011 18:56

• Backup controlfile by RMAN error

  Hi all
  
  
  When I perform the backup by issuing:
  RMAN > BACKUP AS BACKUPSET DEVICE TYPE DISK CURRENT CONTROLFILE COMPRESSED FORMAT ' / u02/controlfile_%T_%d_%s_%p' TAG CTLFILETEST;
  
  From backup may 23, 11
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid = 71 devtype = DISK
  allocated channel: ORA_DISK_2
  channel ORA_DISK_2: sid = 90 devtype = DISK
  allocated channel: ORA_DISK_3
  channel ORA_DISK_3: sid = 96 devtype = DISK
  allocated channel: ORA_DISK_4
  channel ORA_DISK_4: sid = 142 devtype = DISK
  allocated channel: ORA_DISK_5
  channel ORA_DISK_5: sid = 115 devtype = DISK
  allocated channel: ORA_DISK_6
  channel ORA_DISK_6: sid = 58 devtype = DISK
  allocated channel: ORA_DISK_7
  channel ORA_DISK_7: sid = 82 devtype = DISK
  allocated channel: ORA_DISK_8
  channel ORA_DISK_8: sid = 70 devtype = DISK
  allocated channel: ORA_DISK_9
  channel ORA_DISK_9: sid = 79 devtype = DISK
  allocated channel: ORA_DISK_10
  channel ORA_DISK_10: sid = 114 devtype = DISK
  channel ORA_DISK_1: from compressed full datafile backupset
  channel ORA_DISK_1: specifying datafile (s) in backupset
  including the current control in backupset file
  channel ORA_DISK_1: starting piece 1 to May 23, 11
  channel ORA_DISK_1: finished piece 1 to May 23, 11
  total, handle = / u02/controlfile_20110523_ORCL_477_1 tag = comment CTLFILETEST = NONE
  channel ORA_DISK_1: complete set of backups, time: 00:00:03
  Backup finished on 23 May 11
  
  From control file Autobackup 23 May 11
  total, handle = / u02/autobackup_control_filec-1219672647-20110523-0 b comment = NONE
  Finish the control file Autobackup to on 23 May 11
  
  But I found the error in the alert.log:
  Mon May 23 13:12:37 2011
  Errors in the /u01/oracle/admin/ORCL/udump/orcl_ora_22993.trc file:
  Mon May 23 13:12:37 2011
  Errors in the /u01/oracle/admin/ORCL/udump/orcl_ora_22993.trc file:
  Mon May 23 13:12:37 2011
  Errors in the /u01/oracle/admin/ORCL/udump/orcl_ora_22993.trc file:
  Mon May 23 13:12:38 2011
  From control autobackup
  Mon May 23 13:12:41 2011
  Errors in the /u01/oracle/admin/ORCL/udump/orcl_ora_22993.trc file:
  Mon May 23 13:12:41 2011
  Errors in the /u01/oracle/admin/ORCL/udump/orcl_ora_22993.trc file:
  Mon May 23 13:12:41 2011
  Errors in the /u01/oracle/admin/ORCL/udump/orcl_ora_22993.trc file:
  Autobackup written control disk device
  handle "/ u02/autobackup_control_filec-1219672647-20110523-0 b.
  
  The content of /u01/oracle/admin/ORCL/udump/orcl_ora_22993.trc is:
  /U01/Oracle/admin/ORCL/udump/orcl_ora_22993.TRC more
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64 bit Production
  With partitioning, OLAP and Data Mining options
  ORACLE_HOME = / u01/oracle/102
  Name of the system: Linux
  Name of the node: KMTD3
  News Release: 2.6.18 - 194.el5
  Version: #1 SMP kills Mar 29 22:10:29 EDT 2010
  Machine: x86_64
  Name of the instance: ORCL
  Redo thread mounted by this instance: 1
  Oracle process number: 72
  The Unix process PID: 22993, image: oracle@KMTD3 (TNS V1 - V3)
  
  ACTION NAME:(0000018 STARTED16) 2011-05-23 13:12:37.922
  MODULE NAME: 13:12:37.922 2011-05-23 (backup full datafile)
  SERVICE NAME:(SYS$USERS) 2011-05-23 13:12:37.922
  SESSION ID: (71.1979) 2011-05-23 13:12:37.922
  ACTION NAME:(0000022 STARTED111) 2011-05-23 13:12:41.037
  
  My question is: why I get errors in the alert.log same RMAN successful display messages above?
  
  Help, please!
  Thank you
  Quoc Tri.

  Refer to this link, it will help you

  http://forums.Oracle.com/forums/message.jspa?MessageID=9420561#9420561

• Restore RMAN error

  Hello
  I restore 20 Apr 11 backup but it give the error below mention. Please notify
  
  rman bash-3 target. $ 00 /.
  THE VALUE OF DBID 3166051926
  RUN {}
  startup nomount
  allocate channel c1 type disk;
  allocate channel c2 type disk;
  
  Recovery Manager: Release 10.2.0.4.0 - Production Fri Apr 29 23:55:09 2011
  
  Copyright (c) 1982, 2007, Oracle. All rights reserved.
  
  allocated channel c3 type disk;
  CONTROLFILE AUTOBACKUP FORMAT SET
  FOR DEVICE TYPE DISK TO ' / oranfsbkup/lmsdb/backup/20APR11/%F';
  RESTORE AUTOMATIC BACKUP CONTROLFILE;
  change the editing of the database;
  restore the database;
  recover the database;
  output channel c1;
  output channel c2.
  output channel c3.
  ALTER database open resetlogs;
  } connected to the database target (not started)
  
  RMAN >
  executing command: SET DBID
  
  RMAN >
  
  Oracle instance started
  
  Total System Global Area 3221225472 bytes
  
  Bytes of size 2105952 fixed
  209718688 variable size bytes
  3003121664 of database buffers bytes
  Redo buffers 6279168 bytes
  
  using the control file of the target instead of recovery catalog database
  allocated channel: c1
  channel c1: sid = 153 devtype = DISK
  
  allocated channel: c2
  channel c2: sid = 152 devtype = DISK
  
  allocated channel: c3
  channel c3: sid = 150 devtype = DISK
  
  executing command: SET CONTROLFILE AUTOBACKUP FORMAT
  
  From restoration to the 29 April 11
  
  channel c1: looking for autobackup day: 20110429
  channel c1: looking for autobackup day: 20110428
  channel c1: looking for autobackup day: 20110427
  channel c1: looking for autobackup day: 20110426
  channel c1: looking for autobackup day: 20110425
  channel c1: looking for autobackup day: 20110424
  channel c1: looking for autobackup day: 20110423
  channel c1: found no autobackup in 7 days
  channel c2: looking for autobackup day: 20110429
  channel c2: looking for autobackup day: 20110428
  channel c2: looking for autobackup day: 20110427
  channel c2: looking for autobackup day: 20110426
  channel c2: looking for autobackup day: 20110425
  channel c2: looking for autobackup day: 20110424
  channel c2: looking for autobackup day: 20110423
  channel c2: found no autobackup in 7 days
  channel c3: looking for autobackup day: 20110429
  channel c3: looking for autobackup day: 20110428
  channel c3: looking for autobackup day: 20110427
  channel c3: looking for autobackup day: 20110426
  channel c3: looking for autobackup day: 20110425
  channel c3: looking for autobackup day: 20110424
  channel c3: looking for autobackup day: 20110423
  channel c3: found no autobackup in 7 days
  output channel: c1
  output channel: c2
  output channel: c3
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 29/04/2011 23:55:22
  RMAN-06172: no autobackup couldn't find or handle specified is not a valid copy or a piece
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00558: error occurred during parsing of order entry
  RMAN-01006: error scored during the analysis
  RMAN-02003: unrecognized character:
  
  RMAN > show all.
  
  RMAN configuration parameters are:
  CONFIGURE REDUNDANCY 1 RETENTION STRATEGY; # by default
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP # by default
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
  
  Thank you
  Merri

  See the example which has the command
  "RESTORE CONTROLFILE AUTOBACKUP MAXSEQ 100;

  to
  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14194/rcmsynta055.htm#sthref875

  The MAXSEQ 100 in this example is to instruct the Oracle to go as far as 100 days looking to save.
  (the value by default, as you have discovered, is 7 days).

  Hemant K Collette

• Alert file RMAN error

  Although taking RMAN backup, an error in the alert file: -.
  
  Errors in the /dbs/admin/DMS/udump/dms_ora_14704.trc file
  
  When I went to the place mentioned above, is to show the following result
  
  
  */DBS/Admin/DMS/udump/dms_ora_14704.TRC*
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64 bit Production
  With partitioning, OLAP and Data Mining options
  ORACLE_HOME = / dbs/OraHome
  Name of the system: HP - UX
  Name of the node: dmsdb1
  Press release: B.11.31
  Version: U
  Machine: ia64
  Instance name: DMS
  Redo thread mounted by this instance: 1
  Oracle process number: 30
  The Unix process PID: 14704, image: oracle@dmsdb1 (TNS V1 - V3)
  
  ACTION NAME:(0000036 STARTED16) 2011-03-08 11:05:09.373
  MODULE NAME: 11:05:09.373 2011-03-08 (full datafile backup)
  SERVICE NAME:(SYS$USERS) 2011-03-08 11:05:09.373
  SESSION ID: (139.9801) 2011-03-08 11:05:09.373
  2011-03-08 11:05:38.910
  ACTION NAME:(0000119 STARTED16) 2011-03-08 11:05:38.910
  MODULE NAME: 11:05:38.910 2011-03-08 (full datafile backup)
  
  Please tell me what will be the possible reason
  
  Published by: Sunny kichloo March 7, 2011 21:54

  Hello

  If you need more information, just check in all of your backup and validate and if everything is OK leave it.
  Search the corruptions of the list of points of view... just in case

  -Pounet N

• "Backup Rman error".

  C:\Documents and Settings\vikash.chauradia > target rman.
  
  Hello
  
  
  While taqking RMAN backup, I get the following error. Please tell me the Solution.
  
  
  
  Recovery Manager: Release 10.2.0.4.0 - Production on Mon Nov 22 18:08:38 2010
  
  Copyright (c) 1982, 2007, Oracle. All rights reserved.
  
  connected to target database: SIPDB (DBID = 2608741090)
  
  RMAN > backup database;
  
  From backup November 22, 10
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid = 150 devtype = DISK
  channel ORA_DISK_1: from full datafile backupset
  channel ORA_DISK_1: specifying datafile (s) in backupset
  input datafile fno = 00004 name=D:\ORACLE\PRODUCT\10.2.0\ORADATA\SIPDB\USERS01. DBF
  input datafile fno = 00005 name=D:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\MOBILE01. DBF
  input datafile fno = 00001 name=D:\ORACLE\PRODUCT\10.2.0\ORADATA\SIPDB\SYSTEM01. DBF
  input datafile fno = name=D:\ORACLE\PRODUCT\10.2.0\ORADATA\SIPDB\UNDOTBS01 00002. DBF
  input datafile fno = 00003 name=D:\ORACLE\PRODUCT\10.2.0\ORADATA\SIPDB\SYSAUX01. DBF
  channel ORA_DISK_1: starting piece 1 to 22 November 10
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 2010-11-22 18:08:56
  ORA-19504: could not create the file "D:\ORACLE\PRODUCT\10.2.0\BACKUP FILES\16LTLKTN_1_1".
  ORA-27040: create file error, cannot create the file
  04002 - OSD: could not open the file
  S/O-error: (OS 3) the system cannot find the path specified.
  
  
  Thanks and greetings
  Vikash Chauradia

  ORA-19504: could not create the file "D:\ORACLE\PRODUCT\10.2.0\BACKUP FILES\16LTLKTN_1_1".

  Check the appropriate permissions to create a file in the directory * BACKUP FILES * and exist it directory or not.

  Thank you

• RMAN error - validate restore them database

  Hi all
  
  I am trying to validate a full backup database made on tape by using the command 'Validate restore database', but for some reason that this command spits out several page long PL/SQL code (under truncated output). I looked all over for a solution but do not understand the problem.
  
  Any help will be appreciated.
  
  
  
  RMAN > assign the channel for the type of maintenance parms SBT_TAPE 'ENV=(TDPO_OPTFILE=/opt/tivoli/tsm/client/oracle/bin64/tdpo.opt) ';
  2 > crosscheck backup;
  3 > validate restore them database;
  4 > channel;
  5 > "exit";
  allocated channel: ORA_MAINT_SBT_TAPE_1
  channel ORA_MAINT_SBT_TAPE_1: SID = 82 device type = SBT_TAPE
  channel ORA_MAINT_SBT_TAPE_1: for Oracle Data Protection: version 5.4.1.0
  
  "" element of verified backup: turned out to be "AVAILABLE"
  the backup piece handle = c-822607628-20101006-02 RECID = 66 = 731711718 STAMP
  "" element of verified backup: turned out to be "AVAILABLE"
  handle = DB_20101007_77_2dlpsj84_1_1.dbf backup RECID = 67 = 731794692 STAMP item
  "" element of verified backup: turned out to be "AVAILABLE"
  .
  .
  .
  .
  .
  handle = CF_20101008_116_3klpt5iv_1_1.ctl backup RECID = 106 = 731813472 STAMP item
  "" element of verified backup: turned out to be "AVAILABLE"
  the backup piece handle = c-822607628-20101008-01 RECID = STAMP 107 = 731813518
  Cut 42 objects
  
  From restoration to October 8, 10
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 110 type device = DISK
  
  DBGANY: Type CMD = HAKIMOUSS cmdid = 1 table = DO NOT START
  DBGANY: 1 STEPstepid = 1 cmdid = 1 table = NOT STARTED devtype = bs.stamp = 731812991 = 0 bytes step_size SBT_TAPE.
  DBGANY: 1 TEXTNOD = - rsdf_start
  DBGANY: 2 TEXTNOD = declare
  DBGANY: TEXTNOD 3 = / * restoreStatus * /.
  DBGANY: 4 TEXTNOD = directory of State;
  DBGANY: TEXTNOD 5 = pieces_done directory;
  DBGANY: TEXTNOD 6 = file directory;
  DBGANY: 7 TEXTNOD = Boolean data files;
  DBGANY: 8 additional boolean = TEXTNOD;
  DBGANY: 9 TEXTNOD = Boolean device;
  DBGANY: 10 TEXTNOD = / * restorebackuppiece * /.
  DBGANY: 11 TEXTNOD = boolean done;
  DBGANY: 12 TEXTNOD is currcf boolean;.
  .
  .
  .
  .
  .
  DBGANY: TEXTNOD 266 = sys.dbms_backup_restore.restoreCancel (FALSE);
  DBGANY: 267 TEXTNOD = exception
  DBGANY: 268 TEXTNOD = then that others then
  DBGANY: 269 TEXTNOD = krmicd.writeMsg (1005,
  DBGANY: TEXTNOD 270 = "c. dbms_backup_restore.restoreCancel () failed");
  DBGANY: 271 TEXTNOD = end;
  DBGANY: 272 TEXTNOD = sys.dbms_backup_restore.setRmanStatusRowId (rsid = > 0, RST = > 0);
  DBGANY: TEXTNOD 273 = end;
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00601: fatal error in the Recovery Manager
  RMAN-03004: fatal error when executing command
  [RMAN-00600: internal error, arguments [6000] [] [] []]

  I remember there's a BACKUP command to VALIDATE, but I don't remember, it's the syntax or the difference with the RESTORATION of data TO ENTER.
  So I'll need to read the documentation too.

  -------------
  Sybrand Bakker
  Senior Oracle DBA