RMAN error
Hello everyone
I'm new to the rman recovery
my script as below
run
{
allocate channel c1 type disk;
allocate channel c2 type disk;
allocated channel c3 type disk;
@/ rman_bkp/db_script.sql;
restore the database;
switch datafile;
recover the database;
output channel c1;
output channel c2.
output channel c3.
}
file db_script. SQL I gave commands below
the value of newname for datafile 352 to ' / ebsapps/uatdb/uatdata/system09.dbf';
the value of newname for datafile 353 to ' / ebsapps/uatdb/uatdata/system08.dbf';
the value of newname for datafile 354 to ' / ebsapps/uatdb/uatdata/system11.dbf';
the value of newname for datafile 379 to ' / ebsapps/uatdb/uatdata/undo01.dbf';
the value of newname for datafile 392 to ' / ebsapps/uatdb/uatdata/a_txn_data01.dbf';
the value of newname for datafile 393 to ' / ebsapps/uatdb/uatdata/a_txn_ind01.dbf';
the value of newname for datafile 394 to ' / ebsapps/uatdb/uatdata/a_ref01.dbf';
the value of newname for datafile 395 to ' / ebsapps/uatdb/uatdata/a_int01.dbf';
the value of newname for datafile 396 to ' / ebsapps/uatdb/uatdata/a_summ01.dbf';
the value of newname for datafile 397 to ' / ebsapps/uatdb/uatdata/a_nolog01.dbf';
the value of newname for datafile 398 to ' / ebsapps/uatdb/uatdata/a_archive01.dbf';
the value of newname for datafile 399 to ' / ebsapps/uatdb/uatdata/a_queue01.dbf';
the value of newname for datafile 400 to ' / ebsapps/uatdb/uatdata/a_media01.dbf';
the value of newname for datafile 401 to ' / ebsapps/uatdb/uatdata/a_txn_data02.dbf';
So my question is when I run the rman script he ever read the file
get error below
RMAN-00558: error occurred during parsing of order entry
RMAN-01006: error reported during the analysis
' RMAN-00556: could not open CMDFILE ' / rman_bkp/db_script.sql; »
and beginning of restoration in the default path.
Why it happened I give chmod and chown every thing. ?
I found the error need to delete ';' after the script in the rman script file
Tags: Database
Similar Questions
-
Do not go out on backup RMAN error
Hi friends,
In our production Nagios is configured and for RMAN backup error a query defined for check ' SELECT COUNT (*) FROM v$ rman_status status WHERE! = 'COMPLETE' AND status! = 'RUNNING' start_time AND > sysdate-3 "."
But in above question his move upward.
I also checked up on the side of the database manually his hanging the session that no output is coming.
Also, I changed the query slightly to get the result ' select count (*) from V$ RMAN_STATUS where operation = 'SAVE' and nvl (status, 'X') not in ('DONE', 'CURRENT') and start_time > = trunc (sysdate - 3); but the same produce no output
Please tell me how to get the result for the last 3 days of our days.
Version of DB - 11.2.0.2
Kind regards
Arya
Hi all
Thanks for your reply.
I changed the query in Nagios taking the view v$ rman_backup_job_details. Its working fine.
Kind regards
Arya
-
I get below error while trying to restore the database. Please let me know where I made mistakes.
RMAN > RUN
2 > {}
3 > STARTUP NOMOUNT
4 > SET until TIME ' TO_DATE (31 July 14 09:24 ', "DD-MM-YY HH24:MI:SS");
5 > restore controlfile to ' E:\EffTemp\RMAN_CONTROL. RMAN';
6 > startup MOUNT;
7 > RESTORE database;
8 > RECOVER DATABASE;
9 > ALTER DATABASE OPEN RESETLOGS;
{10 >}
connected to the database target (not started)
Oracle instance started
Total System Global Area 2622255104 bytes
Bytes of size 2258072 fixed
1946159976 variable size bytes
654311424 of database buffers bytes
Redo buffers 19525632 bytes
executing command: SET until clause
From restoration to the 31 July 14
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the restore command to 31/07/2014 11:55:29
ORA-01507: database not mounted
Try this use of it, you must format the date type and then use set until:
RMAN > RUN
{
SHUTDOWN IMMEDIATE;
STARTUP NOMOUNT;
RESTORE AUTOMATIC BACKUP CONTROLFILE;
stop immediately;
bootable media;
SQL "alter session set NLS_DATE_FORMAT = 'My JJ YYYY HH24:MI:SS' ';"
Up to THE TIME "November 19, 2018 21:30 ';"
RESTORE THE DATABASE;
RECOVER THE DATABASE;
SHUTDOWN IMMEDIATE;
BOOTABLE MEDIA;
}
-
HI good day,
I'm under oracle 11g on windows, as I am new to oracle database im practicing in my pc.
When I practice I came across an error
While taking ArchiveLog backup
I did these steps
RMAN > backup alchive connect all;
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00558: error occurred during parsing of order entry
RMAN-01009: syntax error: found 'identifier': expected an a: ' archivelog, too. "
auxiliary, backupset backup, channel, check, controlfilecopy, copies, copy, cu
mulative, common, database, data, db_file_name_convert, datafilecopy, db_re file
covery_file_dest, diskratio, duration, filesperset, force, unit, format,.
Since, full, incremental, keep maxsetsize nochecksum, noexclude, nokeep, p
OOL, proxy, recovery, re-use, section, readonly jump, jump, spfile, tablespace, t
AG, in, validate (")
RMAN-01008: the identifier of the AfDB was: alchive
RMAN-01007: line 1 column 8 file: entry standard
This is the error that I had can someone help me solve this problem
thanking you in advance
Prakash
Hello
The problem is the syntax:
Examples:
RMAN > ARCHIVELOG BACKUP ALL.
RMAN > delete any backup archivelog entry;
Note: This save your archive and delete them;
BACKUP DATABASE MORE ARCHIVELOG;
Note: This will backup your database and your archive without deleting the archives.
I hope this help you
Concerning
-
I changed a db in archivelog noarchivelog mode because there was a problem with archivelog (no free space in the destination of recovery)
The problem comes when trying to run backup script backup.
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure to allocate command at 24/09/2013 14:55:54
RMAN-06428: recovery catalog is not installed
The problem comes when trying to run backup script backup.
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure to allocate command at 24/09/2013 14:55:54
RMAN-06428: recovery catalog is not installed
Hello
Connect to the database as the owner of the catalog schema and issue this query:
SELECT db_key, db_id FROM db WHERE db_id = 12345639687;
DB_ID DB_KEY
---------- ----------
12345639687 XXXXXXX
Then, run the following package:
SQL > execute dbms_rcvcat.unregisterdatabase (xxxxxxx, 12345639687);
After that, you can save the database again.
Thank you
-
Hello
I need help to solve the following problem with RMAN backup.
«"ORA-19506: failed to create the batch file, name ="Datafile6_DatabasePRD", parms ="»
the database is 11.2.0.2 on HP - UX.
ORA-27028: skgfqcre: sbtbackup returned the error
ORA-19511: error received from layer media manager, error text:
The backup file already exists: Datafile6_DatabasePRD (100:110:2)
The backup script is;
Error logs:BACKUP DATAFILECOPY FROM TAG 'INCREMENTAL' FORMAT 'Datafile%f_Database%d';
channel t6_tape_backup: starting piece 1 at 13-JAN-13 RMAN-03009: failure of backup command on t1_tape_backup channel at 01/13/2013 11:12:51 ORA-19506: failed to create sequential file, name="Datafile6_DatabasePRD", parms="" ORA-27028: skgfqcre: sbtbackup returned error ORA-19511: Error received from media manager layer, error text: The backup file already exists: Datafile6_DatabasePRD (100:110:2) channel t1_tape_backup disabled, job failed on it will be run on another channel RMAN-03009: failure of backup command on t2_tape_backup channel at 01/13/2013 11:12:51 ORA-19506: failed to create sequential file, name="Datafile4_DatabasePRD", parms="" ORA-27028: skgfqcre: sbtbackup returned error ORA-19511: Error received from media manager layer, error text: The backup file already exists: Datafile4_DatabasePRD (100:110:2) channel t2_tape_backup disabled, job failed on it will be run on another channel RMAN-03009: failure of backup command on t3_tape_backup channel at 01/13/2013 11:12:51 ORA-19506: failed to create sequential file, name="Datafile1_DatabasePRD", parms="" ORA-27028: skgfqcre: sbtbackup returned error ORA-19511: Error received from media manager layer, error text: The backup file already exists: Datafile1_DatabasePRD (100:110:2) channel t3_tape_backup disabled, job failed on it will be run on another channel RMAN-03009: failure of backup command on t5_tape_backup channel at 01/13/2013 11:12:51 ORA-19506: failed to create sequential file, name="Datafile2_DatabasePRD", parms="" ORA-27028: skgfqcre: sbtbackup returned error ORA-19511: Error received from media manager layer, error text: The backup file already exists: Datafile2_DatabasePRD (100:110:2) channel t5_tape_backup disabled, job failed on it will be run on another channel RMAN-03009: failure of backup command on t6_tape_backup channel at 01/13/2013 11:12:51 ORA-19506: failed to create sequential file, name="Datafile5_DatabasePRD", parms="" ORA-27028: skgfqcre: sbtbackup returned error ORA-19511: Error received from media manager layer, error text: The backup file already exists: Datafile5_DatabasePRD (100:110:2) channel t6_tape_backup disabled, job failed on it will be run on another channel channel t7_tape_backup: starting compressed full datafile backup set channel t7_tape_backup: including datafile copy of datafile 00006 in backup set input file name=+FLASH_DG/PRDstby/datafile/wpslog.3510.803139043 channel t7_tape_backup: starting piece 1 at 13-JAN-13 channel t8_tape_backup: starting compressed full datafile backup set channel t8_tape_backup: including datafile copy of datafile 00004 in backup set input file name=+FLASH_DG/PRDstby/datafile/wps.3509.803139043 channel t8_tape_backup: starting piece 1 at 13-JAN-13 RMAN-03009: failure of backup command on t4_tape_backup channel at 01/13/2013 11:12:51 ORA-19506: failed to create sequential file, name="Datafile3_DatabasePRD", parms="" ORA-27028: skgfqcre: sbtbackup returned error ORA-19511: Error received from media manager layer, error text: The backup file already exists: Datafile3_DatabasePRD (100:110:2) channel t4_tape_backup disabled, job failed on it will be run on another channel RMAN-03009: failure of backup command on t7_tape_backup channel at 01/13/2013 11:12:52 ORA-19506: failed to create sequential file, name="Datafile6_DatabasePRD", parms="" ORA-27028: skgfqcre: sbtbackup returned error ORA-19511: Error received from media manager layer, error text: The backup file already exists: Datafile6_DatabasePRD (100:110:2) channel t7_tape_backup disabled, job failed on it will be run on another channel released channel: t1_tape_backup released channel: t2_tape_backup released channel: t3_tape_backup released channel: t4_tape_backup released channel: t5_tape_backup released channel: t6_tape_backup released channel: t7_tape_backup released channel: t8_tape_backup RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03015: error occurred in stored script weekly_backup RMAN-03009: failure of backup command on t8_tape_backup channel at 01/13/2013 11:12:52 ORA-19506: failed to create sequential file, name="Datafile4_DatabasePRD", parms="" ORA-27028: skgfqcre: sbtbackup returned error ORA-19511: Error received from media manager layer, error text: The backup file already exists: Datafile4_DatabasePRD (100:110:2)
This seems reasonable. It worked when you tried?
-
Hi all
rman, we can check the details of backups is complete or failed with V$ RMAN_BACKUP_JOB_DETAILS and v$ RMAN_STATUS views.
If it is a failed State is it a request to get this code in the database or we must depend on the papers only. currently I don't have newspapers to get the error code.
Thank you very much...Hello
You can use v$ rman_ouput.
Note: The rman_output view v$ focuses on memory so it will not persist to a restart of the database (IE will not recorded in the controlfile). The display can contain 32768 lines.If you want to keep all the data in v$ rman_output you have 3 option:
1. use the RMAN CATALOG on the different database.
2. use a trigger on the view RMAN_OUTPUT V_$ to keep track of all the backup on a separate table information
3. use a RMAN catalog on the same database only for this purpose (not recommended)See this example:
http://www.dbspecialists.com/blog/database-backups/using-vrman_output-to-review-your-backups/Published by: Levi Pereira on November 9, 2012 14:58
-
RMAN error: ora-12705 while testing on the tape with EMC networker backup 7.63
We failed with our script, rman with the following error. Version of the OS is redhat linux 5. DB version is 11.2.0.3
Recovery Manager: release 11.2.0.3.0 - Production on Wed Sep 22:50:48 5 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
RMAN > Connect target *;
2 > #rman target / < < EOF
3 > #rman target;
4 > run {}
5 > configure the parallelism of peripheral band type 4;
6 > ALLOCATE CHANNEL ch1 TYPE 'SBT_TAPE ';
7 > allocate Ribbon type channel ch2.
8 > allocate Ribbon type channel ch3;
9 > assign the channel type Ribbon ch4;
10 > allocate Ribbon type channel ch5.
11 > configure controlfile autobackup on;
12 > configure the type of backup device type Ribbon backupset compressed;
13 > INCREMENTAL LEVEL 0 BACKUP copy the TAG "fullcopy_prd" DATABASE
14 > CHANNEL ch1.
15 > CHANNEL ch2.
16 > CHANNEL ch3;
17 > CHANNEL ch4;
18 > CHANNEL ch5.
{19 >}
20 > {EXECUTION
21 > ALLOCATE CHANNEL ch1 TYPE 'SBT_TAPE ';
22 > SAVE that copy ALL ARCHIVELOG;
23 > SAVE that copy CURRENT CONTROLFILE;
24 > CHANNEL ch1.
25 > crosscheck backup;
26 > delete NOPROMPT obsolete FORCE.
{27 >}
28 > "exit";
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
ORA-12705: cannot access files of NLS data or invalid environment specified
Complete recovery manager.
The seller of bands is EMC networker 763. There are other other aix hosts running prod db supported by the same provider, we tried their script on the linux host, we got an exact same error.
I wonder if I should setup NLS enviornment. but the emc network operates by setting variables in a config file in / etc /. He did information non-specific nls.
Does he know this seller and this problem, please help me solve the problem.
Thank you in advance.982335 wrote:
RMAN-06583: at least 1 channel of TYPE DISK must be distributed to use the COPY AS optionSince I was on backup as copy. So backup copy won't work on the Strip?
Hello
No, you can't backup as copy directly to tape.
Don't know if it works but try this
1. first copy the disk backup
2. then backup datafilecopy all tapeSee you soon
-
Hi the gems...
I take rman backup of my database...
RMAN
connect the target
backup database;
but he showed an error
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 29/05/2011 18:39:
37
ORA-19809: limit exceeded for file recovery
ORA-19804: cannot retrieve 52428800 bytes of 2147483648 limit disk space
pls help... Thanks in advanceIt seems that you have enabled the FLASH RECOVERY AREA,
Check the free space, make sure that there is enough free space and then run again.
ALTER system set db_recovery_file_dest_size =
; Published by: CKPT on May 29, 2011 18:56
-
Backup controlfile by RMAN error
Hi all
When I perform the backup by issuing:
RMAN > BACKUP AS BACKUPSET DEVICE TYPE DISK CURRENT CONTROLFILE COMPRESSED FORMAT ' / u02/controlfile_%T_%d_%s_%p' TAG CTLFILETEST;
From backup may 23, 11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid = 71 devtype = DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid = 90 devtype = DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid = 96 devtype = DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: sid = 142 devtype = DISK
allocated channel: ORA_DISK_5
channel ORA_DISK_5: sid = 115 devtype = DISK
allocated channel: ORA_DISK_6
channel ORA_DISK_6: sid = 58 devtype = DISK
allocated channel: ORA_DISK_7
channel ORA_DISK_7: sid = 82 devtype = DISK
allocated channel: ORA_DISK_8
channel ORA_DISK_8: sid = 70 devtype = DISK
allocated channel: ORA_DISK_9
channel ORA_DISK_9: sid = 79 devtype = DISK
allocated channel: ORA_DISK_10
channel ORA_DISK_10: sid = 114 devtype = DISK
channel ORA_DISK_1: from compressed full datafile backupset
channel ORA_DISK_1: specifying datafile (s) in backupset
including the current control in backupset file
channel ORA_DISK_1: starting piece 1 to May 23, 11
channel ORA_DISK_1: finished piece 1 to May 23, 11
total, handle = / u02/controlfile_20110523_ORCL_477_1 tag = comment CTLFILETEST = NONE
channel ORA_DISK_1: complete set of backups, time: 00:00:03
Backup finished on 23 May 11
From control file Autobackup 23 May 11
total, handle = / u02/autobackup_control_filec-1219672647-20110523-0 b comment = NONE
Finish the control file Autobackup to on 23 May 11
But I found the error in the alert.log:
Mon May 23 13:12:37 2011
Errors in the /u01/oracle/admin/ORCL/udump/orcl_ora_22993.trc file:
Mon May 23 13:12:37 2011
Errors in the /u01/oracle/admin/ORCL/udump/orcl_ora_22993.trc file:
Mon May 23 13:12:37 2011
Errors in the /u01/oracle/admin/ORCL/udump/orcl_ora_22993.trc file:
Mon May 23 13:12:38 2011
From control autobackup
Mon May 23 13:12:41 2011
Errors in the /u01/oracle/admin/ORCL/udump/orcl_ora_22993.trc file:
Mon May 23 13:12:41 2011
Errors in the /u01/oracle/admin/ORCL/udump/orcl_ora_22993.trc file:
Mon May 23 13:12:41 2011
Errors in the /u01/oracle/admin/ORCL/udump/orcl_ora_22993.trc file:
Autobackup written control disk device
handle "/ u02/autobackup_control_filec-1219672647-20110523-0 b.
The content of /u01/oracle/admin/ORCL/udump/orcl_ora_22993.trc is:
/U01/Oracle/admin/ORCL/udump/orcl_ora_22993.TRC more
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64 bit Production
With partitioning, OLAP and Data Mining options
ORACLE_HOME = / u01/oracle/102
Name of the system: Linux
Name of the node: KMTD3
News Release: 2.6.18 - 194.el5
Version: #1 SMP kills Mar 29 22:10:29 EDT 2010
Machine: x86_64
Name of the instance: ORCL
Redo thread mounted by this instance: 1
Oracle process number: 72
The Unix process PID: 22993, image: oracle@KMTD3 (TNS V1 - V3)
ACTION NAME:(0000018 STARTED16) 2011-05-23 13:12:37.922
MODULE NAME: 13:12:37.922 2011-05-23 (backup full datafile)
SERVICE NAME:(SYS$USERS) 2011-05-23 13:12:37.922
SESSION ID: (71.1979) 2011-05-23 13:12:37.922
ACTION NAME:(0000022 STARTED111) 2011-05-23 13:12:41.037
My question is: why I get errors in the alert.log same RMAN successful display messages above?
Help, please!
Thank you
Quoc Tri.Refer to this link, it will help you
http://forums.Oracle.com/forums/message.jspa?MessageID=9420561#9420561
-
Hello
I restore 20 Apr 11 backup but it give the error below mention. Please notify
rman bash-3 target. $ 00 /.
THE VALUE OF DBID 3166051926
RUN {}
startup nomount
allocate channel c1 type disk;
allocate channel c2 type disk;
Recovery Manager: Release 10.2.0.4.0 - Production Fri Apr 29 23:55:09 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
allocated channel c3 type disk;
CONTROLFILE AUTOBACKUP FORMAT SET
FOR DEVICE TYPE DISK TO ' / oranfsbkup/lmsdb/backup/20APR11/%F';
RESTORE AUTOMATIC BACKUP CONTROLFILE;
change the editing of the database;
restore the database;
recover the database;
output channel c1;
output channel c2.
output channel c3.
ALTER database open resetlogs;
} connected to the database target (not started)
RMAN >
executing command: SET DBID
RMAN >
Oracle instance started
Total System Global Area 3221225472 bytes
Bytes of size 2105952 fixed
209718688 variable size bytes
3003121664 of database buffers bytes
Redo buffers 6279168 bytes
using the control file of the target instead of recovery catalog database
allocated channel: c1
channel c1: sid = 153 devtype = DISK
allocated channel: c2
channel c2: sid = 152 devtype = DISK
allocated channel: c3
channel c3: sid = 150 devtype = DISK
executing command: SET CONTROLFILE AUTOBACKUP FORMAT
From restoration to the 29 April 11
channel c1: looking for autobackup day: 20110429
channel c1: looking for autobackup day: 20110428
channel c1: looking for autobackup day: 20110427
channel c1: looking for autobackup day: 20110426
channel c1: looking for autobackup day: 20110425
channel c1: looking for autobackup day: 20110424
channel c1: looking for autobackup day: 20110423
channel c1: found no autobackup in 7 days
channel c2: looking for autobackup day: 20110429
channel c2: looking for autobackup day: 20110428
channel c2: looking for autobackup day: 20110427
channel c2: looking for autobackup day: 20110426
channel c2: looking for autobackup day: 20110425
channel c2: looking for autobackup day: 20110424
channel c2: looking for autobackup day: 20110423
channel c2: found no autobackup in 7 days
channel c3: looking for autobackup day: 20110429
channel c3: looking for autobackup day: 20110428
channel c3: looking for autobackup day: 20110427
channel c3: looking for autobackup day: 20110426
channel c3: looking for autobackup day: 20110425
channel c3: looking for autobackup day: 20110424
channel c3: looking for autobackup day: 20110423
channel c3: found no autobackup in 7 days
output channel: c1
output channel: c2
output channel: c3
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the restore command at 29/04/2011 23:55:22
RMAN-06172: no autobackup couldn't find or handle specified is not a valid copy or a piece
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00558: error occurred during parsing of order entry
RMAN-01006: error scored during the analysis
RMAN-02003: unrecognized character:
RMAN > show all.
RMAN configuration parameters are:
CONFIGURE REDUNDANCY 1 RETENTION STRATEGY; # by default
CONFIGURE BACKUP OPTIMIZATION # by default
SET UP DEFAULT DISK DEVICE TYPE; # by default
CONFIGURE CONTROLFILE AUTOBACKUP # by default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
CONFIGURE ENCRYPTION OF DATABASE # by default
CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
Thank you
MerriSee the example which has the command
"RESTORE CONTROLFILE AUTOBACKUP MAXSEQ 100;to
http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14194/rcmsynta055.htm#sthref875The MAXSEQ 100 in this example is to instruct the Oracle to go as far as 100 days looking to save.
(the value by default, as you have discovered, is 7 days).Hemant K Collette
-
Hi Experts,
I have 3 databases on 10.1.0.2 and 1 Database 10.2.0.1 on windows.
When I start RMAN I get following error.
RMAN > Connect target /.
Recovery Manager incompatible with the TARGET database: RMAN req 8.0.4.0 to 10.1.0.0
Unlike
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-06429: TARGET database is not compatible with this version of RMAN
When he is interviewed got after the version of RMAN.
SQL > select dbms_rcvman.getpackageversion from double;
GETPACKAGEVERSION
--------------------------------------------------------------------------------
08.00.04.00
Thank youI guess you've changed ORACLE_HOME, but not the path. So always the wrong RMAN executable is invoked.
C:\oracle\product\10.1.0\db_2\bin\rman or change the path.
Edited by: oradba the 16.04.2011 09:16
-
Although taking RMAN backup, an error in the alert file: -.
Errors in the /dbs/admin/DMS/udump/dms_ora_14704.trc file
When I went to the place mentioned above, is to show the following result
*/DBS/Admin/DMS/udump/dms_ora_14704.TRC*
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64 bit Production
With partitioning, OLAP and Data Mining options
ORACLE_HOME = / dbs/OraHome
Name of the system: HP - UX
Name of the node: dmsdb1
Press release: B.11.31
Version: U
Machine: ia64
Instance name: DMS
Redo thread mounted by this instance: 1
Oracle process number: 30
The Unix process PID: 14704, image: oracle@dmsdb1 (TNS V1 - V3)
ACTION NAME:(0000036 STARTED16) 2011-03-08 11:05:09.373
MODULE NAME: 11:05:09.373 2011-03-08 (full datafile backup)
SERVICE NAME:(SYS$USERS) 2011-03-08 11:05:09.373
SESSION ID: (139.9801) 2011-03-08 11:05:09.373
2011-03-08 11:05:38.910
ACTION NAME:(0000119 STARTED16) 2011-03-08 11:05:38.910
MODULE NAME: 11:05:38.910 2011-03-08 (full datafile backup)
Please tell me what will be the possible reason
Published by: Sunny kichloo March 7, 2011 21:54Hello
If you need more information, just check in all of your backup and validate and if everything is OK leave it.
Search the corruptions of the list of points of view... just in case-Pounet N
-
C:\Documents and Settings\vikash.chauradia > target rman.
Hello
While taqking RMAN backup, I get the following error. Please tell me the Solution.
Recovery Manager: Release 10.2.0.4.0 - Production on Mon Nov 22 18:08:38 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: SIPDB (DBID = 2608741090)
RMAN > backup database;
From backup November 22, 10
using the control file of the target instead of recovery catalog database
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid = 150 devtype = DISK
channel ORA_DISK_1: from full datafile backupset
channel ORA_DISK_1: specifying datafile (s) in backupset
input datafile fno = 00004 name=D:\ORACLE\PRODUCT\10.2.0\ORADATA\SIPDB\USERS01. DBF
input datafile fno = 00005 name=D:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\MOBILE01. DBF
input datafile fno = 00001 name=D:\ORACLE\PRODUCT\10.2.0\ORADATA\SIPDB\SYSTEM01. DBF
input datafile fno = name=D:\ORACLE\PRODUCT\10.2.0\ORADATA\SIPDB\UNDOTBS01 00002. DBF
input datafile fno = 00003 name=D:\ORACLE\PRODUCT\10.2.0\ORADATA\SIPDB\SYSAUX01. DBF
channel ORA_DISK_1: starting piece 1 to 22 November 10
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 2010-11-22 18:08:56
ORA-19504: could not create the file "D:\ORACLE\PRODUCT\10.2.0\BACKUP FILES\16LTLKTN_1_1".
ORA-27040: create file error, cannot create the file
04002 - OSD: could not open the file
S/O-error: (OS 3) the system cannot find the path specified.
Thanks and greetings
Vikash ChauradiaORA-19504: could not create the file "D:\ORACLE\PRODUCT\10.2.0\BACKUP FILES\16LTLKTN_1_1".
Check the appropriate permissions to create a file in the directory * BACKUP FILES * and exist it directory or not.
Thank you
-
RMAN error - validate restore them database
Hi all
I am trying to validate a full backup database made on tape by using the command 'Validate restore database', but for some reason that this command spits out several page long PL/SQL code (under truncated output). I looked all over for a solution but do not understand the problem.
Any help will be appreciated.
RMAN > assign the channel for the type of maintenance parms SBT_TAPE 'ENV=(TDPO_OPTFILE=/opt/tivoli/tsm/client/oracle/bin64/tdpo.opt) ';
2 > crosscheck backup;
3 > validate restore them database;
4 > channel;
5 > "exit";
allocated channel: ORA_MAINT_SBT_TAPE_1
channel ORA_MAINT_SBT_TAPE_1: SID = 82 device type = SBT_TAPE
channel ORA_MAINT_SBT_TAPE_1: for Oracle Data Protection: version 5.4.1.0
"" element of verified backup: turned out to be "AVAILABLE"
the backup piece handle = c-822607628-20101006-02 RECID = 66 = 731711718 STAMP
"" element of verified backup: turned out to be "AVAILABLE"
handle = DB_20101007_77_2dlpsj84_1_1.dbf backup RECID = 67 = 731794692 STAMP item
"" element of verified backup: turned out to be "AVAILABLE"
.
.
.
.
.
handle = CF_20101008_116_3klpt5iv_1_1.ctl backup RECID = 106 = 731813472 STAMP item
"" element of verified backup: turned out to be "AVAILABLE"
the backup piece handle = c-822607628-20101008-01 RECID = STAMP 107 = 731813518
Cut 42 objects
From restoration to October 8, 10
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 110 type device = DISK
DBGANY: Type CMD = HAKIMOUSS cmdid = 1 table = DO NOT START
DBGANY: 1 STEPstepid = 1 cmdid = 1 table = NOT STARTED devtype = bs.stamp = 731812991 = 0 bytes step_size SBT_TAPE.
DBGANY: 1 TEXTNOD = - rsdf_start
DBGANY: 2 TEXTNOD = declare
DBGANY: TEXTNOD 3 = / * restoreStatus * /.
DBGANY: 4 TEXTNOD = directory of State;
DBGANY: TEXTNOD 5 = pieces_done directory;
DBGANY: TEXTNOD 6 = file directory;
DBGANY: 7 TEXTNOD = Boolean data files;
DBGANY: 8 additional boolean = TEXTNOD;
DBGANY: 9 TEXTNOD = Boolean device;
DBGANY: 10 TEXTNOD = / * restorebackuppiece * /.
DBGANY: 11 TEXTNOD = boolean done;
DBGANY: 12 TEXTNOD is currcf boolean;.
.
.
.
.
.
DBGANY: TEXTNOD 266 = sys.dbms_backup_restore.restoreCancel (FALSE);
DBGANY: 267 TEXTNOD = exception
DBGANY: 268 TEXTNOD = then that others then
DBGANY: 269 TEXTNOD = krmicd.writeMsg (1005,
DBGANY: TEXTNOD 270 = "c. dbms_backup_restore.restoreCancel () failed");
DBGANY: 271 TEXTNOD = end;
DBGANY: 272 TEXTNOD = sys.dbms_backup_restore.setRmanStatusRowId (rsid = > 0, RST = > 0);
DBGANY: TEXTNOD 273 = end;
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00601: fatal error in the Recovery Manager
RMAN-03004: fatal error when executing command
[RMAN-00600: internal error, arguments [6000] [] [] []]I remember there's a BACKUP command to VALIDATE, but I don't remember, it's the syntax or the difference with the RESTORATION of data TO ENTER.
So I'll need to read the documentation too.-------------
Sybrand Bakker
Senior Oracle DBA
Maybe you are looking for
-
I don't want this button to update
Hello I have an old iPhone 4S and an old Macbook for mid-2010. I think that when your hardware is old, it is best to stop the update. But the Appstore keeps prompting, and it is very very annoying. Why Apple does not add a button: "I don't want this
-
Selection of content in itunes problem
I could not solve the problem in the itunes store. When I click on a film image or music album on the itunes store, it evokes the bad movie or album. I have to move my mouse somewhere on the previous film or the image of the album so that I can cho
-
Satellite 2410-304: upgrade HARD drive
News, I have a laptop Satellite 2430-304 with a MK3018GAS of hard drive (30 GB). I would change this hd for one of them, MK4026GAX, MK6026GAX and MK8026GAX. The dimensions are the same, 2.5 ", 69,85 mm, 9.5 mm, 100 mm. could I choose one then no prob
-
Re: Satellite C870 - 1 3 shows nothing
My friend - 1 3 C870 satellite appears not at all.But he claims that he has restarted after the fall and the second time is no more. I tried to connect it to an external display, but also nothing. Any suggestions before I open it?
-
missing uxcore.dll in windows xp
error when using windows live photo gallery