RMAN error code

Hi all

rman, we can check the details of backups is complete or failed with V$ RMAN_BACKUP_JOB_DETAILS and v$ RMAN_STATUS views.
If it is a failed State is it a request to get this code in the database or we must depend on the papers only. currently I don't have newspapers to get the error code.

Thank you very much...

Hello

You can use v$ rman_ouput.
Note: The rman_output view v$ focuses on memory so it will not persist to a restart of the database (IE will not recorded in the controlfile). The display can contain 32768 lines.

If you want to keep all the data in v$ rman_output you have 3 option:
1. use the RMAN CATALOG on the different database.
2. use a trigger on the view RMAN_OUTPUT V_$ to keep track of all the backup on a separate table information
3. use a RMAN catalog on the same database only for this purpose (not recommended)

See this example:
http://www.dbspecialists.com/blog/database-backups/using-vrman_output-to-review-your-backups/

Published by: Levi Pereira on November 9, 2012 14:58

Tags: Database

Similar Questions

RMAN duplicate: ORA-00283, ORA-0060internal error code, arguments: [kcvhvdf
This is related to this thread: Re: duplicated to database: ends with error: rman-06136 ora-01110

I supported the newspaper of archive and continues:

RMAN > overview of the database to recover
2 >.

To go back to November 16, 12
using channel ORA_DISK_1
using channel ORA_DISK_1

Archive logs generated after that YVERT 0 not found in the repository
Start of recovery Media SNA is 0
Recovery must be beyond SNA 91215577536 to clear the hazy data file
Finished recover at 16 November 12

RMAN > run {}
2 > set up what SNA 91215577536.
3 > restore database;
4 > sql ' alter database open resetlogs;
{5 >};

executing command: SET until clause

To go back to November 16, 12
using channel ORA_DISK_1

starting media recovery
media recovery failed
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the command recover at 11/16/2012 19:45:40
ORA-00283: cool cancelled due to errors
RMAN-11003: failure in parsing / execution of the SQL statement: alter database reco worm if necessary
forward this 91215577536 change using backup controlfile
ORA-00283: cool cancelled due to errors
[ORA-00600: internal error code, arguments: [kcvhvdf_1], [], [], [], [], [], [], [], [], [], []]

In the alerts log, the ora-00600 even raised.

How to get around this problem?

Thank you
Hello;

I agree with you. And while I have nothing to correct your error, this document is worth seeing:

http://gavinsoorma.com/2012/04/RMAN-duplicate-database-RAC-to-RAC/

If nothing else its useful to add to any collection of notes, you can have.

Best regards

mseberg

ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512
Hello

My version of the database is SQL More: Release 10.2.0.4.0 - Production *.

But I am experiencing an error in my database

Sat Feb 02 15:55:09 2013
WARNING: inbound connections has expired (ORA-3136)
Sat Feb 02 15:55:46 2013
Error caught 3135 trapped in the 2PC on transaction 95.9.36937 Protocol. Cleaning.
Sat Feb 02 15:55:46 2013
Error caught 3135 trapped in the 2PC on transaction 217.30.22297 Protocol. Cleaning.
Sat Feb 02 15:55:46 2013
Error caught 3135 trapped in the 2PC on transaction 218.0.21621 Protocol. Cleaning.
Sat Feb 02 15:55:47 2013
Error caught 3135 trapped in the 2PC on transaction 61.0.73378 Protocol. Cleaning.
Sat Feb 02 15:55:47 2013
Error caught 3135 trapped in the 2PC on transaction 99.45.36824 Protocol. Cleaning.
Sat Feb 02 15:55:47 2013
Error caught 3135 trapped in the 2PC on transaction 103.3.42125 Protocol. Cleaning.
Sat Feb 02 15:55:48 2013
Error caught 3135 trapped in the 2PC on transaction 21.34.383312 Protocol. Cleaning.
Sat Feb 02 15:55:48 2013
Error caught 3135 trapped in the 2PC on transaction 162.42.25904 Protocol. Cleaning.
Sat Feb 02 15:55:49 2013
Error caught 3135 trapped in the 2PC on transaction 190.10.28842 Protocol. Cleaning.
Sat Feb 02 15:55:49 2013
Error caught 3135 trapped in the 2PC on transaction 132.7.33798 Protocol. Cleaning.
Sat Feb 02 15:55:50 2013
Error caught 3135 trapped in the 2PC on transaction 57.31.98874 Protocol. Cleaning.
Sat Feb 02 15:55:50 2013
Error caught 3135 trapped in the 2PC on transaction 116.16.30060 Protocol. Cleaning.
Sat Feb 02 15:55:51 2013
Error caught 3135 trapped in the 2PC on transaction 214.14.26429 Protocol. Cleaning.
Sat Feb 02 15:55:52 2013
Error caught 3135 trapped in the 2PC on transaction 72.23.56805 Protocol. Cleaning.
Sat Feb 02 15:55:53 2013
Error caught 3135 trapped in the 2PC on transaction 3.12.2402246 Protocol. Cleaning.
Sat Feb 02 15:56:53 2013
WARNING: inbound connections has expired (ORA-3136)
Sat Feb 02 15:57:15 2013
ARC2: warning. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Sat Feb 02 15:57:15 2013
ARCH: Stopped archiving, error occurred. Will continue to retry
Sat Feb 02 15:57:15 2013
Old archive newspaper with the same name may be replaced.
Sat Feb 02 15:57:15 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc1_6976.trc file:
ORA-16038: log sequence 9 # 112096 can be archived
ORA-00001: unique constraint (.) has violated

Sat Feb 02 15:57:15 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc2_11104.trc file:
ORA-19504: cannot create the file 'I:\ARCHIVE_LOG\ARC499E66E8_12096_0707337067.001 '.
ORA-27044: cannot write the file header block
OSD-04008: WriteFile() failure, cannot write to the file
S/O-error: (OS 112) there is not enough space on the disk.

ARC2: 19504 error creating archive log file to "I:\ARCHIVE_LOG\ARC499E66E8_12096_0707337067.001".
Sat Feb 02 15:57:32 2013
ARCH: Stopped archiving, error occurred. Will continue to retry
Sat Feb 02 15:57:32 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc2_11104.trc file:
ORA-16014: log 9 sequence # 112096 not archived, not available destinations
ORA-00312: wire 9 1 online journal: ' G:\ORADATA\REDO09A. JOURNAL"
ORA-00312: wire 9 1 online journal: ' H:\ORADATA\REDO09B. JOURNAL"

Sat Feb 02 16:01:59 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_12584.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:02:03 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_12584.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:02:06 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_12584.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:02:08 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_12584.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:02:10 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_12584.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:02:13 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_12584.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:02:15 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_12584.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:02:18 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_12584.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:02:20 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_12584.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:02:32 2013
ARC3: warning. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Old archive newspaper with the same name may be replaced.
Sat Feb 02 16:02:32 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc3_8376.trc file:
ORA-19504: cannot create the file 'I:\ARCHIVE_LOG\ARC499E66E8_12096_0707337067.001 '.
ORA-27044: cannot write the file header block
OSD-04008: WriteFile() failure, cannot write to the file
S/O-error: (OS 112) there is not enough space on the disk.

ARC3: 19504 error creating archive log file to "I:\ARCHIVE_LOG\ARC499E66E8_12096_0707337067.001".
ARCH: Stopped archiving, error occurred. Will continue to retry
Sat Feb 02 16:02:32 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc3_8376.trc file:
ORA-16038: log sequence 9 # 112096 can be archived
ORA-19504: cannot create the file «»
ORA-00312: wire 9 1 online journal: ' G:\ORADATA\REDO09A. JOURNAL"
ORA-00312: wire 9 1 online journal: ' H:\ORADATA\REDO09B. JOURNAL"

Sat Feb 02 16:03:32 2013
ARCH: Stopped archiving, error occurred. Will continue to retry
Sat Feb 02 16:03:32 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc0_8808.trc file:
ORA-16014: log 9 sequence # 112096 not archived, not available destinations
ORA-00312: wire 9 1 online journal: ' G:\ORADATA\REDO09A. JOURNAL"
ORA-00312: wire 9 1 online journal: ' H:\ORADATA\REDO09B. JOURNAL"

Sat Feb 02 16:05:03 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_8816.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:05:08 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_8816.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:05:10 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_8816.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:05:13 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_8816.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:05:15 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_8816.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:05:42 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_8816.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:05:45 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_8816.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:05:47 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_8816.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:05:49 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_8816.trc file:
[ORA-00600: internal error code, arguments: [krbpwbsz_not_lbszXpbsz], [512], [4096] [] [] [], [],]

Sat Feb 02 16:08:32 2013
Arc1: warning. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Old archive newspaper with the same name may be replaced.
Sat Feb 02 16:08:32 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc1_6976.trc file:
ORA-19504: cannot create the file 'I:\ARCHIVE_LOG\ARC499E66E8_12096_0707337067.001 '.
ORA-27044: cannot write the file header block
OSD-04008: WriteFile() failure, cannot write to the file
S/O-error: (OS 112) there is not enough space on the disk.

Arc1: 19504 error creating archive log file to "I:\ARCHIVE_LOG\ARC499E66E8_12096_0707337067.001".
ARCH: Stopped archiving, error occurred. Will continue to retry
Sat Feb 02 16:08:32 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc1_6976.trc file:
ORA-16038: log sequence 9 # 112096 can be archived
ORA-19504: cannot create the file «»
ORA-00312: wire 9 1 online journal: ' G:\ORADATA\REDO09A. JOURNAL"
ORA-00312: wire 9 1 online journal: ' H:\ORADATA\REDO09B. JOURNAL"

Sat Feb 02 16:08:41 2013
WARNING: inbound connections has expired (ORA-3136)
Sat Feb 02 16:09:32 2013
ARCH: Stopped archiving, error occurred. Will continue to retry
Sat Feb 02 16:09:32 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc2_11104.trc file:
ORA-16014: log 9 sequence # 112096 not archived, not available destinations
ORA-00312: wire 9 1 online journal: ' G:\ORADATA\REDO09A. JOURNAL"
ORA-00312: wire 9 1 online journal: ' H:\ORADATA\REDO09B. JOURNAL"

Sat Feb 02 16:14:11 2013
Error caught 3135 trapped in the 2PC on transaction 58.18.82800 Protocol. Cleaning.
Sat Feb 02 16:14:11 2013
Error caught 3135 trapped in the 2PC on transaction 37.38.128575 Protocol. Cleaning.
Sat Feb 02 16:14:12 2013
Error caught 3135 trapped in the 2PC on transaction 233.38.21737 Protocol. Cleaning.
Sat Feb 02 16:14:12 2013
Error caught 3135 trapped in the 2PC on transaction 60.15.83540 Protocol. Cleaning.
Sat Feb 02 16:14:12 2013
WARNING: inbound connections has expired (ORA-3136)
Sat Feb 02 16:14:13 2013
Error caught 3135 trapped in the 2PC on transaction 203.9.20007 Protocol. Cleaning.
Sat Feb 02 16:14:14 2013
Error caught 3135 trapped in the 2PC on transaction 31.36.132668 Protocol. Cleaning.
Sat Feb 02 16:14:32 2013
ARC3: warning. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Old archive newspaper with the same name may be replaced.
kcrrdmx: archiving successful previously failed ORL
Archiver released errors process. Is more interrupted
Sat Feb 02 16:14:39 2013
Arc0: caveat. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Old archive newspaper with the same name may be replaced.
Sat Feb 02 16:14:40 2013
Battery error returned to the user:
Sat Feb 02 16:14:40 2013
Battery error returned to the user:
ORA-03135: connection lost contact
Sat Feb 02 16:14:40 2013
Sat Feb 02 16:14:43 2013
Battery error returned to the user:
ORA-03135: connection lost contact
ORA-03135: connection lost contact
Sat Feb 02 16:14:44 2013
Battery error returned to the user:
Sat Feb 02 16:14:44 2013
Battery error returned to the user:
ORA-03135: connection lost contact
ORA-03135: connection lost contact
Sat Feb 02 16:14:45 2013
Thread 1 Advanced to record the sequence 112099 (switch LGWR)
Sat Feb 02 16:14:45 2013
Battery error returned to the user:
Sat Feb 02 16:14:45 2013
Currently journal # 9 seq # 112099 mem # 0: G:\ORADATA\REDO09A. JOURNAL
Currently journal # 9 seq # 112099 mem # 1: H:\ORADATA\REDO09B. JOURNAL
Sat Feb 02 16:14:46 2013
Battery error returned to the user:
ORA-03135: connection lost contact
ORA-03135: connection lost contact
Sat Feb 02 16:14:47 2013
Battery error returned to the user:
Sat Feb 02 16:14:47 2013
Battery error returned to the user:
ORA-03135: connection lost contact
ORA-03135: connection lost contact
Sat Feb 02 16:14:48 2013
Battery error returned to the user:
ORA-03135: connection lost contact
Sat Feb 02 16:14:49 2013
Battery error returned to the user:
Sat Feb 02 16:14:49 2013
Battery error returned to the user:
ORA-03135: connection lost contact
ORA-03135: connection lost contact
ORA-03135: connection lost contact
ORA-03135: connection lost contact
Sat Feb 02 16:21:43 2013
Sat Feb 02 19:59:30 2013
ORA-01555 caused by the following SQL statement (SQL ID: f3udhzjsjkyrg, query term s = 1359815369, SCN: 0x0001.86058adf):
Sat Feb 02 19:59:30 2013
SELECT * FROM RELATIONAL ("ORISSA_TRANSACTION". "BUYER_BIOMETRICS_TBL") "
Sat Feb 02 20:09:35 2013
Thread 1 Advanced to record the sequence 112124 (switch LGWR)
Currently journal # 10, seq # 112124 mem # 0: G:\ORADATA\REDO10A. JOURNAL
Currently journal # 10, seq # 112124 member # 1: H:\ORADATA\REDO10B. JOURNAL
Sat Feb 02 20:09:35 2013
ARC2: warning. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Old archive newspaper with the same name may be replaced.
Sat Feb 02 20:26:45 2013
*************************************************************
Impossible to allocate the newspaper flashback to 1946 blocks of
current recovery of 1073741824 bytes size area.
Retention of current database Flashback is lower than the target
due to lack of space in the flash recovery area.
Flashback will continue to use the available space, but the
the flash recovery area size must be increased to reach
the aim of retention of Flashback database
Use ALTER SYSTEM SET db_recovery_file_dest_size command
to add a space. DO NOT manually REMOVE the flashback logs
to create a space.
*************************************************************
Sat Feb 02 20:31:04 2013
The value of MAXTRANS parameter ignored (30).
kupprdp: master the DM00 process started with pid = 56, OS id = 4324
to run - SYS. KUPM$ MCP. HAND ('SYS_EXPORT_SCHEMA_29', 'ORISSA_TRANSACTION', ' KUPC$ C_1_20130202203105', ' KUPC$ S_1_20130202203105', 0);
kupprdp: work DW01 process began with worker id = 1, pid = 30, OS id = 6108
to run - SYS. WORKER OF $ MAIN. HAND ('SYS_EXPORT_SCHEMA_29', 'ORISSA_TRANSACTION');
Sat Feb 02 21:02:43 2013
*************************************************************
Impossible to allocate the newspaper flashback to 1946 blocks of
current recovery of 1073741824 bytes size area.
Retention of current database Flashback is lower than the target
due to lack of space in the flash recovery area.
Flashback will continue to use the available space, but the
the flash recovery area size must be increased to reach
the aim of retention of Flashback database
Use ALTER SYSTEM SET db_recovery_file_dest_size command
to add a space. DO NOT manually REMOVE the flashback logs
to create a space.
*************************************************************
Sun Feb 03 00:12:12 2013
Thread 1 Advanced to record the sequence 112144 (switch LGWR)
Currently journal # 9 seq # 112144 mem # 0: G:\ORADATA\REDO09A. JOURNAL
Currently journal # 9 seq # 112144 member # 1: H:\ORADATA\REDO09B. JOURNAL
Sun Feb 03 00:12:12 2013
ARC2: warning. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Old archive newspaper with the same name may be replaced.
Sun Feb 03 00:12:34 2013
Thread 1 cannot allot of new newspapers, sequence 112145
Checkpoint is not complete
Currently journal # 9 seq # 112144 mem # 0: G:\ORADATA\REDO09A. JOURNAL
Currently journal # 9 seq # 112144 member # 1: H:\ORADATA\REDO09B. JOURNAL
Sun Feb 03 00:12:36 2013
Thread 1 Advanced to record the sequence 112145 (switch LGWR)
Currently journal # 10 seq # 112145 mem # 0: G:\ORADATA\REDO10A. JOURNAL
Currently journal # 10 seq # 112145 mem # 1: H:\ORADATA\REDO10B. JOURNAL
Sun Feb 03 00:12:36 2013
ARC3: warning. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Old archive newspaper with the same name may be replaced.
Sun Feb 03 00:30:02 2013
*************************************************************
Impossible to allocate the newspaper flashback to 1946 blocks of
current recovery of 1073741824 bytes size area.
Retention of current database Flashback is lower than the target
due to lack of space in the flash recovery area.
Flashback will continue to use the available space, but the
the flash recovery area size must be increased to reach
the aim of retention of Flashback database
Use ALTER SYSTEM SET db_recovery_file_dest_size command
to add a space. DO NOT manually REMOVE the flashback logs
to create a space.
*************************************************************
Sun Feb 03 00:30:47 2013
Thread 1 Advanced to record the sequence 112146 (switch LGWR)
Currently Journal # 8 seq # 112146 mem # 0: G:\ORADATA\REDO08A. JOURNAL
Currently Journal # 8 seq # 112146 member # 1: H:\ORADATA\REDO08B. JOURNAL
Sun Feb 03 00:30:47 2013
Arc0: caveat. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Old archive newspaper with the same name may be replaced.
Sun Feb 03 00:37:55 2013
Sun Feb 03 02:12:39 2013
From control autobackup
Sun Feb 03 02:13:26 2013
Errors in the d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6744.trc file:
ORA-19815: WARNING: 5368709120 bytes db_recovery_file_dest_size is 100.00% used and has 0 bytes remaining available.

Sun Feb 03 02:13:26 2013
************************************************************************
You have choice to free up space of the flash recovery area:
1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard
then consider changing POLICY of DELETE ARCHIVELOG RMAN.
2 back up files on a tertiary device such as a tape with RMAN
SAFEGUARDING RECOVERY AREA command.
3. Add space drive and increase the db_recovery_file_dest_size setting to
reflect the new space.
4 remove the unnecessary files using the RMAN DELETE command. If a service
the system control has been used to remove the files, and then use the RMAN DUPLICATION and
Commands DELETE has EXPIRED.
************************************************************************
Automatic backup failed with the following error
ORA-19583: conversation interrupted due to error
ORA-19809: limit exceeded for file recovery
ORA-19804: cannot recover disk 34193408 bytes limit 5368709120 space
Sun 03 Feb 09:32:49 2013
*************************************************************
Impossible to allocate the newspaper flashback to 1946 blocks of
current recovery of 1073741824 bytes size area.
Retention of current database Flashback is lower than the target
due to lack of space in the flash recovery area.
Flashback will continue to use the available space, but the
the flash recovery area size must be increased to reach
the aim of retention of Flashback database
Use ALTER SYSTEM SET db_recovery_file_dest_size command
to add a space. DO NOT manually REMOVE the flashback logs
to create a space.
*************************************************************
Sun Feb 03 10:09:35 2013
*************************************************************
Impossible to allocate the newspaper flashback to 1946 blocks of
current recovery of 1073741824 bytes size area.
Retention of current database Flashback is lower than the target
due to lack of space in the flash recovery area.
Flashback will continue to use the available space, but the
the flash recovery area size must be increased to reach
the aim of retention of Flashback database
Use ALTER SYSTEM SET db_recovery_file_dest_size command
to add a space. DO NOT manually REMOVE the flashback logs
to create a space.
*************************************************************
Sun Feb 03 10:34:44 2013
Thread 1 Advanced to record the sequence 112171 (switch LGWR)
Currently journal # 9 seq # 112171 mem # 0: G:\ORADATA\REDO09A. JOURNAL
Currently journal # 9 seq # 112171 mem # 1: H:\ORADATA\REDO09B. JOURNAL
Sun Feb 03 10:34:44 2013
Arc1: warning. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Old archive newspaper with the same name may be replaced.
Sun Feb 03 10:35:10 2013
Thread 1 Advanced to record the sequence 112172 (switch LGWR)
Currently journal # 10, seq # 112172 mem # 0: G:\ORADATA\REDO10A. JOURNAL
Currently journal # 10, seq # 112172 member # 1: H:\ORADATA\REDO10B. JOURNAL
Sun Feb 03 10:35:10 2013
ARC2: warning. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Old archive newspaper with the same name may be replaced.
Sun Feb 03 10:35:40 2013
Thread 1 Advanced to record the sequence 112173 (switch LGWR)
Currently Journal # 8 seq # 112173 mem # 0: G:\ORADATA\REDO08A. JOURNAL
Currently Journal # 8 seq # 112173 mem # 1: H:\ORADATA\REDO08B. JOURNAL
Sun Feb 03 10:35:40 2013
ARC3: warning. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Old archive newspaper with the same name may be replaced.
Sun Feb 03 10:36:11 2013
Thread 1 Advanced to record the sequence 112174 (switch LGWR)
Currently journal # 9 seq # 112174 mem # 0: G:\ORADATA\REDO09A. JOURNAL
Currently journal # 9 seq # 112174 mem # 1: H:\ORADATA\REDO09B. JOURNAL
Sun Feb 03 10:36:11 2013
Arc0: caveat. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Old archive newspaper with the same name may be replaced.
Sun Feb 03 10:36:43 2013
Thread 1 Advanced to record the sequence 112175 (switch LGWR)
Currently journal # 10 seq # 112175 mem # 0: G:\ORADATA\REDO10A. JOURNAL
Currently journal # 10 seq # 112175 mem # 1: H:\ORADATA\REDO10B. JOURNAL
Sun Feb 03 10:36:43 2013
Arc1: warning. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Old archive newspaper with the same name may be replaced.
Sun Feb 03 10:37:17 2013
Thread 1 Advanced to record the sequence 112176 (switch LGWR)
Currently Journal # 8 seq # 112176 mem # 0: G:\ORADATA\REDO08A. JOURNAL
Currently Journal # 8 seq # 112176 mem # 1: H:\ORADATA\REDO08B. JOURNAL
Sun Feb 03 10:37:17 2013
ARC2: warning. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Old archive newspaper with the same name may be replaced.
Sun Feb 03 12:22:12 2013
*************************************************************
Impossible to allocate the newspaper flashback to 1946 blocks of
current recovery of 1073741824 bytes size area.
Retention of current database Flashback is lower than the target
due to lack of space in the flash recovery area.
Flashback will continue to use the available space, but the
the flash recovery area size must be increased to reach
the aim of retention of Flashback database
Use ALTER SYSTEM SET db_recovery_file_dest_size command
to add a space. DO NOT manually REMOVE the flashback logs
to create a space.
*************************************************************
Sun Feb 03 12:54:02 2013
*************************************************************
Impossible to allocate the newspaper flashback to 1946 blocks of
current recovery of 1073741824 bytes size area.
Retention of current database Flashback is lower than the target
due to lack of space in the flash recovery area.
Flashback will continue to use the available space, but the
the flash recovery area size must be increased to reach
the aim of retention of Flashback database
Use ALTER SYSTEM SET db_recovery_file_dest_size command
to add a space. DO NOT manually REMOVE the flashback logs
to create a space.
*************************************************************

Sun Feb 03 14:10:46 2013
Thread 1 Advanced to record the sequence 112178 (switch LGWR)
Currently journal # 10, seq # 112178 mem # 0: G:\ORADATA\REDO10A. JOURNAL
Currently journal # 10, seq # 112178 member # 1: H:\ORADATA\REDO10B. JOURNAL
Sun Feb 03 14:10:46 2013
Arc0: caveat. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Old archive newspaper with the same name may be replaced.

Sun Feb 03 16:12:17 2013
*************************************************************
Impossible to allocate the newspaper flashback to 1946 blocks of
current recovery of 1073741824 bytes size area.
Retention of current database Flashback is lower than the target
due to lack of space in the flash recovery area.
Flashback will continue to use the available space, but the
the flash recovery area size must be increased to reach
the aim of retention of Flashback database
Use ALTER SYSTEM SET db_recovery_file_dest_size command
to add a space. DO NOT manually REMOVE the flashback logs
to create a space.
*************************************************************
Sun Feb 03 16:33:32 2013
Thread 1 Advanced to record the sequence 112179 (switch LGWR)
Currently Journal # 8 seq # 112179 mem # 0: G:\ORADATA\REDO08A. JOURNAL
Currently Journal # 8 seq # 112179 mem # 1: H:\ORADATA\REDO08B. JOURNAL
Sun Feb 03 16:33:32 2013
Arc1: warning. Wrapped sequence of journal in the name of the file archive
to set specified by %S in LOG_ARCHIVE_FORMAT length.
Old archive newspaper with the same name may be replaced.

Sun Feb 03 20:31 2013
The value of MAXTRANS parameter ignored (30).
kupprdp: master the DM00 process started with pid = 52, OS id = 8204
to run - SYS. KUPM$ MCP. HAND ('SYS_EXPORT_SCHEMA_29', 'ORISSA_TRANSACTION', ' KUPC$ C_1_20130203203100', ' KUPC$ S_1_20130203203100', 0);
kupprdp: work DW01 process began with worker id = 1, pid = 39, OS id = 12420
to run - SYS. WORKER OF $ MAIN. HAND ('SYS_EXPORT_SCHEMA_29', 'ORISSA_TRANSACTION');
Sun Feb 03 20:50:07 2013

I increase my db_recovery_file_dest_size but it is again complete in 2 days.

We ensure configured DB but now there is a problem in standby mode so I did

LOG_ARCHIVE_DEST_STATE_2 string DAVID

The following parameters are for sleep...

db_create_online_log_dest_1 string
db_create_online_log_dest_2 string
db_create_online_log_dest_3 string
db_create_online_log_dest_4 string
db_create_online_log_dest_5 string
log_archive_config string DG_CONFIG = (orcl, stdby)
Log_archive_dest chain
Log_archive_dest_1 string LOCATION = I: \archive_log VALID_
FOR (ALL_LOGFILES, ALL_ROLES) = D
B_UNIQUE_NAME = orcl
LOG_ARCHIVE_DEST_10 string
LOG_ARCHIVE_DEST_2 SERVICE string = stdby VALID_FOR = (ONLIN
E_LOGFILES, PRIMARY_ROLE) DB_UN
IQUE_NAME = stdby
log_archive_dest_3 string
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
allow the chain of log_archive_dest_state_1
allow the chain of log_archive_dest_state_10
LOG_ARCHIVE_DEST_STATE_2 string DAVID
allow the chain of log_archive_dest_state_3
allow the chain of log_archive_dest_state_4
allow the chain of log_archive_dest_state_5
allow the chain of log_archive_dest_state_6
allow the chain of log_archive_dest_state_7
allow the chain of log_archive_dest_state_8
allow the chain of log_archive_dest_state_9
log_archive_duplex_dest string
log_archive_format string ARC%D_%S_%R.%T
log_archive_local_first Boolean TRUE
log_archive_max_processes integer 4
log_archive_min_succeed_dest integer 1
log_archive_start boolean FALSE
log_archive_trace integer 0
log_buffer integer 14246912
log_checkpoint_interval integer 0
log_checkpoint_timeout around 1800
log_checkpoints_to_alert boolean FALSE
log_file_name_convert chain
logmnr_max_persistent_sessions integer 1
Remote_login_passwordfile string EXCLUSIVE

Please give the solution of this problem. I can't ignore this error

Kind regards...
ASIT K. reducing
free space it on disc in particular?

DBVERIFY: error code?
Hello!

is there an error code (such as ora - or - rman) for dbverify? I mean not to Shell syntax, but for the release of check. I don't want to parse the output summary...

...
Total Pages examined: 78080
Total number of Pages processed (data): 52501
Total Pages failing (data): 0
Total number of Pages processed (Index): 8228
Total Pages failing (Index): 0
Total number of Pages processed (other): 2520
Total number of Pages processed (Seg): 0
Total Pages failing (Seg): 0
Total Pages empty: 14831
Total Pages marked corrupt: 0
Total Pages influx: 0
More high block YVERT: 780415653 (3.780415653)

Ciao,.
Christian
No, just count the lines where corrupt > 0 or omitted > 0

grep output.log corrupt | grep - v 0 | WC - c
grep Failed output.log | grep - v 0 | WC - c

If count > 0 then email. Not difficult.

Descriptions of RMAN exit codes
At the top of the error RMAN codes THAT RMAN will return a BONE non zero exit code when it encounters an error. Can someone tell me a document/wire/etc, which could explain the significance of each of these codes? (A 'OS code output' vs 'RMAN error"mapping maybe...?)
Unfortunately, I don't think that there is a way to translate directly to a specific RMAN error exit code.

error code - 50

I was trying to update my I-phone with IOS 10.02 6. While it was updating the phone, I received an error code-50. the phone is now stuck and I can't seem to exit the mode "update." What does this error code mean?

Error code - 50 on iPhone

I keep getting an error code (-1) cannot restore iphone message what can I do?

My iphone 5 c don't continue reading 'no service' or 'research', but it has service through Verizon, I tried to switch to airplane mode, turning turn off / turn on the phone and restore with itunes, but during the restoration it shows error message - 1 will not restore, is there anything else I can do?

Try to restore 2 times more. If get the same error message

take the iPhone at the Apple store nearest for a free evaluation.

Once the diagnosis is complete, staff will explain your options.

-1 is the hardware failure error code. Assuming that no damage to the

your iPhone is not jailbroken, you may qualify for a reduction

the price of the replacement warranty.

Make a Genius Bar reservation to avoid delays.

http://www.Apple.com/retail/Geniusbar/

What is the error Code (-18)

iPhone 6 sec more

iOS 10.0.1

Get an error code (-18) what this code means?

Some parts of the phone have been replaced lately?

What's your iTunes updated to the latest version?

I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

The operation cannot be performed because one or more required items be found.

(Error code - 43)

I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

I'm using an iMac with OS X El Capitan 10.11.6 operating system

Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

Can someone explain please the 4SNS/1/40000000 error code: TMOP - 127.875 and how to solve the problem?

AHT error code.

You have problems? Why do you run Apple hardware *?

Of

http://www.CNET.com/news/how-to-invoke-and-interpret-the-Apple-hardware-tests/

which would indicate a bad sensor on one of your memory modules or riser:

In the case of an error in probe (4SNS), to determine what type of sensor is referenced, look for his first letter, which should be 'I' for the current "V" or "T" for temperature, voltage.

Then check the second letter from the list below to see which component it refers to:

A: ambient air sensor
B: battery
C: Central processors (CPU)
D: DC (direct current)
e: PCI-express slot
F: FireWire port
G: graphics processor (GPU)
H: drive
h: heat pipe (heat sink)
L: liquid crystal display
M: memory or the memory riser cards

I would first install a monitoring app like Mac Fan Control of temperature

http://www.CrystalIDEA.com/Macs-fan-control

to see of you can find a bad sensor by reading the memory riser card.

You have a MacBook Pro as indicated: MacBook Pro, OS X Yosemite (10.10.5)

Since this is the Mac Pro desktop forum

4SNS/1/40000000 error code: VDOR - 18.678 & 18.679

MBP early 2011: I just ran the AHT twice, the first round gave me an error code of 4SNS/1/40000000: VDOR - 18.678, second inning gave the code 4SNS/1/40000000: VDOR - 18.679. Does anyone know what are these error codes? My best guess is probably the RAM, I have (2) modules of 8 GB 1600 Mhz DDR3 OR wireless networking equipment installed. I've noticed recently while multitasking, the wifi connection seems to cling and web pages will not load/downloads will pick up. But the way in which applications will be blocked for 60 seconds makes me think of a bad situation of RAM I have had in the past. Any help would be greatly appreciated since the nearest bar genius lies in 2 1/2 hour. Thank you!

No RAM - 4SNS is a sensor error.

Transcend Jet 360 Lite SD care & "the operation cannot be completed because an unexpected error occurred (error code - 50)"

Have used the SD Transcend 360 256 MB card for data storage with success during the last 6 months on my MBP to mid-2014. Installed their wake from sleep early support software.

Above error code invite you in this context: I wake up Mac in the morning after sleep. Transcend icon "wake up" and appear on the desktop (as it should). I check disk utility and the card is recognized. HOWEVER, about 1/3 of those mornings, despite appearing and functional map icon (folder open when I click on it), when I try to write/copy a file or folder to it, I get the above error code? For about a week I missed that everything seemed normal. My current 'fix' is to eject the card (requires a 'forced ejection"which I'm concerned could damage the card?), but the card ejects without delay. 90% of the time when I remove and reinsert the card, the operating system recognizes, all right. (There are a dozen times when I had to reboot for it to be recognized.)

All the others did this experiment with the Transcend (I submitted a request for tech support to them with a persistent response of 'Question Mac'... (LOL). This error has been noted several times on the Forum discussion, but in the context of external drives and with no apparent solution. FYI, I use the Transcend (in addition to external systems) b/c it works essentially like a hard drive internal and I use it mainly for Google Drive perfectly... except for the above inconveniences. Thanks in advance!

This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

Error code: sec_error_ocsp_unauthorized_request

I'm NOT going to be nice. Here's the description - I disabled the option "question responder OCSP servers to confirm the current validity of certificates. Has no effect. Still, I get this error:

An error occurred during a connection to * removed * .com. The OCSP server refused this request as unauthorized. (Error code: sec_error_ocsp_unauthorized_request)
```
   The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
   Please contact the website owners to inform them of this problem.
```
You... don't even leave the website to load. Try again. Try again. Try again. Try again. Try again. Try again. The certificate of the site is very well as evidenced by SIX different sites of the verification of the SSL certificate. I can't add an exception because FF is unable to obtain the certificate.

I tried to clear all - cache, cookies, history, blah blah blah

I am so bored of you people cost me more time.

It's fine in IE and Chrome.

If I didn't need Firebug, I would switch to Chrome right now.

edited because of the language according to the rules-forum-guidelines

You're right, it is not sensible.

Never made an exception for the site.

FINALLY, what worked was rename the cert8.db file in the profile folder so FF could generate a new. Then FF grabbed the cert very well.

Thank you for the help, sorry for the earlier rant.

4005 and 4013 error codes

Air, 16G iPad. tried to install the latest iOS update. ultimately received 4005 and 4013 error codes. What do these codes mean and how can I fix the problem?

Try troubleshooting on this page: If you see 9-4005, 4013, 4014 error when you restore your device iOS - Apple Support

Suddenly MSEssentials 0x800703eb error code is after the recent installation of firefox 4. Any connection possible? no other recent activity or facilities

MS Security essentials is coming with "your pc could not be analyzed" error code 0x800703eb. This occurs the day after the installation of Firefox 41 with no other facilities important program or activity for some time. We had no other software security for several years, which doesn't seem like a cause as possible. Any ideas or suggestions? Others noticed and reported similar problems?

Thanks for any help
Hans

Hello

So far, 41 Firefox installation is clean. Because your question is related to Microsoft here certain Threads are related to your problem. At the same time you can contact Microsoft Support

I hope this helps.

Thank you!

RMAN error code

Similar Questions

Maybe you are looking for