RMAN supports two types of backups...

Similar Questions

• My video card does support two screens

  HDMI to TV problem

  Hi there, hope I'm on the appropriate form.

  I use Win7 Ultimate with an extended descktop (2 x 19 "LCD) video card is a GeForce GTS 450. I record a lot of TV on my PC using the TV Tuner installed. I have connected the PC to the TV via HDMI cable.

  Now my problem is:

  Aperently video card only seports 2 screens, so I have to sacrifice one of the screens 19 "to allow the TV as a 2nd screen, futermore I can't get sound on TV by changing the audio device defaults to that of the TV.

  Is there a workaround or selution for this?

  I have hafe tried to create a 2nd user account for use of the TV. This doesn't seem to work, influence on the changes I make in one account for the sound device or the installation allso other th screen account.

  Please can anyone solve this problem?

  Hendri Bissolati

  Hello

  -Are you aware of any hardware / software changes on the computer prior to this question?
   
  If the video card in your computer is compatible HDTV, it will probably be two or more video outputs. So, I suggest you to check if the graphics card supports two or more video outputs and check if it helps.
   
  For the problem related to the outputs video more, I suggest to see the link below and check if the problem persists.
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors
  In addition, see the article and check if that helps.
  HDTV: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions
   
  For the problem with the Audio, I also suggest speakers as audio device by default and check.
  
  a. click Start, type Sound in the box to start the search.
  b. click on his research at the top of the Start menu.
  c. click the read tab notice the check mark next to the default device. For most users, the default device is speakers. Make sure that your audio settings are configured as expected. Follow these steps:
  d. on the read tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.
  e. on the read tab, select the playback device, click set upand make sure that the configurations are set correctly.
  f. Select the audio device you want as default audio device, and then click on set default.
  g. click OK to save your settings and close the sound dialog box
  Hope this information helps.

• Why RMAN is not storage of backups in "db_recovery_file_dest?

  Hello

  Select the name, the value of the parameter $ v

  WHERE name = 'db_recovery_file_dest.

  NAME	VALUE
  db_recovery_file_dest	/ora_backup

  When I run the following commands, RMAN lance store backups in "$ORACLE_HOME/dbs':

  RMAN > check effective additional 0 logical backup

  format "% d_ %%U t_ level0_.

  as a database of compressed backupset;

  My understanding is that RMAN should save the backups under '/ora_backup'.

  And when I run the following command, RMAN stores save under ' / ora_backup ':

  RMAN > backup database;

  Could you get it someone please let me know what I'm missing here?

  Here is the config RMAN:

  RMAN > show all.

  RMAN configuration parameters are:

  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;

  CONFIGURE BACKUP OPTIMIZATION # by default

  SET UP DEFAULT DISK DEVICE TYPE; # by default

  CONFIGURE CONTROLFILE AUTOBACKUP ON;

  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default

  SET UP THE DEVICE TYPE DISK PARALLELISM 10 TYPE OF BACKUP BACKUPSET.

  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default

  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default

  CONFIGURE CHANNEL DEVICE TYPE DISK MAXPIECESIZE 5 G;

  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default

  CONFIGURE ENCRYPTION OF DATABASE # by default

  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default

  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default

  CONFIGURE the SNAPSHOT CONTROLFILE NAME to "/app/oracle/product/10.2.0/dbee/dbs/snapcf_< SID >.f '; # by default

  RMAN >

  Best regards

  If you specify a FORMAT, it substitutes for the use of the FRA.

  Run a

  INCREMENTAL LEVEL 0 AS COMPRESSED BACKUPSET DATABASE BACKUP

  Hemant K Collette

• RMAN does not delete outdated backups

  Hello @ all,

  On our server of DB with Oracle 11 GR 2 (11.2.0.3.0) on a RHEL 6 machine I set up RMAN to set a Backupset obsolete after 7 days. Every night a Script is executed which rund a

  RMAN > delete noprompt obsolete;

  I also tried manually, but when I navigate to the location where the lies of Backupsets I also find some files older than 7 days up to the 15.07.2013 THIS! But I try to find out why?

  Here's my Configuration of RMAN:

  RMAN > show all.

  using the control file of the target instead of recovery catalog database

  Database with db_unique_name < SID > RMAN configuration parameters are:

  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;

  CONFIGURE BACKUP OPTIMIZATION # by default

  SET UP DEFAULT DISK DEVICE TYPE; # by default

  CONFIGURE CONTROLFILE AUTOBACKUP ON;

  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default

  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default

  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default

  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default

  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default

  CONFIGURE ENCRYPTION OF DATABASE # by default

  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default

  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default

  CONFIGURE EXCLUDE them for TABLESPACE "xxx";

  CONFIGURE EXCLUDE them for TABLESPACE 'yyy ';

  CONFIGURE EXCLUDE them for TABLESPACE "zzz";

  CONFIGURE ARCHIVELOG DELETION POLICY TO SAVED 1 TIME TO THE DISK.

  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / path/to//snapcf_.f'; # by default

  Help guys please?

  A big thank you and best regards,

  David

  Nearby: what is now the tag for the code? The former seems to not work...

  I found why RMAN took so long backups: in 15.07.2013 I have excluded a tablespace backups because it was non-productive. But RMAN simply leaves the last backup where this tablespace was because it must ensure that. So I deleted #ve this backup manually sets and all the others after that, on retention policy becomes obsolete, and I was able to remove this one!

  Thanks for your great help!

• RMAN SCRIPT TO CLEAR THE BACKUP ITEMS MORE THAN 2 DAYS...

  Hello
  
  I take a full backup of the DB using RMAN script. The script is as below:
  
  grc_backup
  {allocate channel ch1 type disc format ' / home/oragrc/GRCbkup/rman_bkp/data/%T_%c_%s_%f';}
  backup database;
  SQL ' ALTER SYSTEM
  ARCHIVE LOG CURRENT ';
  change archivelog than any overlap;
  ARCHIVELOG backup all the format ' / home/oragrc/GRCbkup/rman_bkp/Archive/%T_al_%U.bck';
  current backup controlfile as ' / home/oragrc/GRCbkup/rman_bkp/%T_cf_%U.bck';
  }
  
  
  This script is supposed to run on a daily basis via an OS script.
  
  The problem is on a daily basis after the backup that I have to delete the backups more than 2 days. For this I use an OS script that finds the backups more than 2 days to find the command and deletes it. This script also removes the archivelogs over 2 days.
  
  I just know that it is not advisable to delete RMAN backups and archived logs OS command when using RMAN.
  
  I figured out the following script, I have changed the script and instance names are different please find below
  
  CONFIGURE REDUNDANCY 2 RETENTION STRATEGY;
  Configure type disk parallelism 1 backup compressed backupset device type;
  
  run
  {
  allocate channel d1 type disk;
  backup filesperset 5 ' format / u06/backup/EBSDEV/EBSDEV_data_t%t_s%s_p%p' database;
  SQL 'alter system archive log current';
  format of backup filesperset 20 ' / u06/backup/EBSDV3/EBSDV3_arch_t%t_s%s_p%p' all entered archivelog delete;
  backup format ' / u06/backup/EBSDEV/EBSDEV_control%U' current controlfile;
  backup spfile format ' / u06/backup/EBSDEV/EBSDEV_spfile_%U';
  SQL 'alter controlfile backup trace database as "/tmp/control.trc" re-use";
  
  OVERLAP BACKUPSET;
  DELETE NOPROMPT OBSOLETE;
  DELETE THE EXPIRED NOPROMPT BACKUP;
  }
  list summary backupset;
  "exit";
  
  Can someone suggest me this AM I correct...

  Yes.

  Note: The OVERLAP should be OVERLAPPING BACKUP.

  Hemant K Collette

• Apply RMAN archivelogs on export of backups

  Hello everyone
  
  We use the below script for RMAN
  run
  {
  allocate channels c1 type 'sbt_tape ';
  backup database archivelog;
  output channel c1;
  }
  
  
  To find out if we will be able to apply archivelogs on export backups? If yes how?
  
  
  Thank you.
  
  Achyot

  It is impossible to apply logs archived recovery (physical backup) after importing an export file (logical backup).

  You can only apply archived redo logs to a physical backup of database or to a waiting physical or logical basis (Data Guard feature).

  See the logical and physical backup definitions:
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14220/glossary.htm#sthref4165
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14220/glossary.htm#i997232

• These two types of schema cache can co-exist for the same application?

  Can these two types of cache-regimes co-exist for the same application in coherence?
  1. close to support-maped by regime distributed cache
  2-reading-writing-support-card system

  From what you describe, that you're on track.

  I think that you have a number of servers that have a size limit near cache and stored disabled for distributed share. Then you have a number of servers that are responsible for the part of writeback (active storage) distributed.

  You can also take a look at the [best practices for consistency | http://coherence.oracle.com/display/COH35UG/Best+Practices]

• I have a Pavilion p6540f. Who will support two monitors?

  I have a Pavilion p6540f. Who will support two monitors? It has outputs two DVI and VGA, but I get conflicting advice in searching for internet information. Should I install a new video card? My 250 watt power supply will support another video card? Thank you.

  Thank you very much for the information and your quick response.  I have a new HP monitor on the way.

  Take care.

• The Pavilion p6120f supports two monitors?

  I want to add a second monitor to the PC.  Is this possible and I have to buy a video card for that to happen?

  Hello

  Integrated into your PC video card does not support two monitors, you have three choices:

  Install a discrete videocard-> costs and better performance a little more

  Use a USB video adapter-> less performance but costs less (USB to VGA or DVI)

  USB Monitor connectable -> lower performance, is more expensive, but includes the monitor.

  Video cards that work with the 300 Watt power supply in your PC.

  $50 - >NVIDIA GT 4309.6 Gbps - single slot width

  $65 - >NVIDIA GT 520 8 Gbps - single slot width

  $70 - > NVIDIA GT 430 22.4 GB/s - the single slot width

  $80 - >NVIDIA GT 44025.6 GB/s - single slot width

  $110 - >NVIDIA GT 240 1 GB DDR5. 54.4 Gbps single slot width, this card does not support DirectX 11 which is eventually used in some of the latest PC games but it's a great performer.

  My recommendation is to go with the video card.  Look at video cards above against your video port conditions.

  ' HP ' how-to ' articles should be useful.

• Selected physical channel DAQmxCreateAIVoltageChan OR-USB-9237 VB6 does not support the type of action required

  I have a VB6 program with code that correctly reads the analog inputs of a NOR-USB-6008.

  I tried to re - use the code in a module of extensometer OR-USB-9237, but at the stage of DAQmxCreateAIVoltageChan, I get the following error:

  "Measurements: physical channel selected does not support the type of measure required by the virtual channel you create."

  Create a channel to a type of measure that is supported by the physical channel, or select a physical channel that supports the type of measure. »

  Should I call one function other than DAQmxCreateAIVoltageChan?

  If so, what is it, or where can I find the reference for these functions?

  Or - if it of the right function, should I pass different arguments?  Currently, I'll call you:

  DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default,-10, 10, DAQmx_Val_VoltageUnits1_Volts, "")

  Thanks in advance for your help

  -Alas

  I thought she 372251a. PDF

  Firstly, the correct function is DAQmxCreateAIVoltageChanWithExcit

  Second, you can't just ask for a sample single channel - ask for 2 samples instead.

  -Alas

• DAQmx error: DAQmx Every N samples transferred the event buffer is not d support channel types

  Hello

  Trying to get my new ni9263 below is the steps:

  DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
  DAQmxErrChk (DAQmxCreateAOVoltageChan(taskHandle,"Dev1/ao0","",-10,10,DAQmx_Val_Volts,)); NOR-USB 9263
  DAQmxErrChk (DAQmxCfgSampClkTiming (taskHandle,"" SAMPLE_RATE, DAQmx_Val_Rising, DAQmx_Val_ContSamps, SAMPLE_SIZE));

  DAQmxErrChk (DAQmxCfgOutputBuffer (taskHandle, OUTPUT_BUFFER_SIZE));

  DAQmxErrChk (DAQmxRegisterDoneEvent(taskHandle,0,DoneCallback,));

  DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent (taskHandle, DAQmx_Val_Transferred_From_Buffer, EVERY_N_SAMPLES, 0, EveryNSamplesCallbackAO, NULL));
  DAQmxSetWriteRegenMode (taskHandle, DAQmx_Val_DoNotAllowRegen);

  Then I do my writing code and start the task

  When I move my code in my application hangs when it comes to DAQmxRegisterEveryNSamplesEvent with the following error

  DAQmx error: DAQmx Every N samples transferred the event buffer is not d support channel types

  Status code :-200980

  Any idea?

  Greetings;

  When you're talking about an alternative, do you mean a sleeve of spare or chassis or an alternative in the code?

  If it's a matter of code, then you probably need to change your software architecture to adapt the capacity of the installation. In order to avoid to use the FIFO and so have the problem you are experiencing, you avoid needing to register for this event? A few examples on different architectures is on the following link:

  http://www.NI.com/white-paper/6999/en

  Kind regards

  Simon Perez

• error message indicates that the new 450 turbo label printer does not support the type of paper 119

  error message indicates that the new 450 turbo label printer does not support the type of paper 119

  Contact the society of the printer.  There is nothing that Microsoft or Windows, can do to force the printer to accept a type of paper, though it says it will not accept it.

• What video card can be added to the s330f to support two monitors?

  I want to add a second monitor to my HP Pavilion s330f.  I think I'll have to add a video card that supports two monitors.  Since this is a slimline box, size is a matter in addition to compatibility.  What cards can be used?

  I was unable to locate a "s330f" on HP support site. Please provide the number of name and/or product of full model specific aid. Assuming you have a HP Pavilion Slimline s3300f desktop PC, the power plant is only rated at 160 watts and there is no PCIe cards x 16 graphics in your computer's power market will be based.

  Depending on what you plan on using two monitors, because there may be an alternative to a new power supply and graphics card.

  (1) Day trading, word documents, spreadsheets and other... buy an adapter USB-to-video as the EVGA UV plus + UV19 or UV39.

  (2) game... not recommended

  (3) source a bigger power supply and the new graphics card for HP

  (4) source of a greater power of athenapower.com and a graphics card 'low - profile' from another source.

• Physical channel selected does not support the type of output required by virtual channel

  I use a box USB-6251.  Inside of MAX, I can set the device to Dev1 / ao1 sine wave generation and if he have output a sine wave.  When I use DAQmx DAQmxCreateAOFuncGenChan function I get error: selected physical channel does not support the type of output required by virtual channel.  The pilot DAQmx does FuncGen on the box USB-6251 or MAX out a set of tensions?

  Hi Paul,.

  Welcome to the Forums EITHER!  The DAQmxCreateAOFuncGenChan is supported only on products Elvis II.  For other devices, including the 6251, you must use the ordinary DAQmxCreateAOVoltageChan and create your own data buffer.  I would recommend looking in the following example:

  Start > all programs > National Instruments > NOR-DAQ > textual Code > ANSI C examples...

  Analog on > generate voltage > Cont Gen Volt Wfm - Int Clk

  In MAX the Sinewave output is used as a test signal - in this case MAX is a period of the wave sine values to write to the buffer and generate these data.  Again, you can produce a sine wave (or any other function) using the AOVoltageChan, but the AOFunctionGenChan is used only with Elvis II.  Just generate data points for the sine wave that will produce DAQ hardware.

  -John

• Laptop support two hard drives

  Hello

  I am looking for a screen of 15.6 inches that supports two hard drives. Can someone point me to the laptop that support two hard disks? I'm more interested in HP Pavilion dv6t-7000 Quad Edition Entertainment Notebook PC but any would do the trick. I am also looking for the laptop to have the full HD screen.

  Thank you

  Sumit

  You can watch the DV7 if having two hard drives is important. The DV7 in laptop computers range has a 2nd HARD drive Bay, and I understand that the DV6, M6, G6, G7, and M7 have only 1 HARD drive Bay. If you buy a DV7 which is not customizable, or retailer, you can always install a 2nd HARD drive by buying the Parts HP hard drive hardware Kit and a HARD drive. HP has been portable computers shipping with Seagate hard drives, but WD, Western Digital, will also work. I recently updated my DV7-3165DX to 2 TB (1 TB WD Scorpio Blue SATA 2.5 in HDD + 1 TB WD Scorpio SATA 2.5 HARD drive in),

  Look at these DV7. The quad core seemed to be the same price when customized at the same level.

  HP Pavilion dv7t-7000 Quad Edition Entertainment Notebook PC

  or

  HP Pavilion dv7t-7000 Select Edition Entertainment Notebook PC

  or

  Computers laptops 17 "HP of Bestbuy.com

  If it helps, please mark it as resolved.