RND4000 - change the hard disks, will that erases data on older players

I took out the old records and set it asside.

Then put in some different readers. Different drives are from a NAS RNDX4000 and they initialize automatically.

I wasn't expecting that.

Now, if I take on different disks and put the old disks in will I lose all the data?

I need to still get the data on the old disks. They worked very well.

I don't want them to be initalized.

The reason is that the RNDX4000 was struck by lightning. Really wanted to get information out of thoes readers. Now, I don't want to lose the information I had in RND4000 work.

OS 4.x ReadyNAS all begin with the formatting of disks when they are hot-inserted and in many cases even when they are not hot-inserted.

But if you turn off, insert the old disks in their original locations, and then powered on, then the system should simply repeat the operation without loss of data or reformatting.

Tags: Netgear

Similar Questions

  • Re: Satellite Pro A40 - can I change the HARD disk or the same model?

    Hi Forum,

    do I have to wait for safe trouble by changing the hard disk between the following laptops:

    old or damaged laptop:
    SPA40 model PSA45E - 0013T - number GR
    Series No. 34127882 H

    new/own laptop
    SPA40 PSA45E-001VM-GR model number
    Series N0.34117607H

    Thanks in advance for your advice

    Concerning

    You can do it. No problem at all. Hard drives are not specific model of laptop parts and with hard drives is important compatibility.
    On the new laptop, which you can use different hard drives. Important is that use you compatible HARD drive.

    Just do it. After Exchange of HARD drive install Os again and everything will be OK.

  • Cannot change the HARD disk parameters in the Bios on Satellite A200

    I can't change the hard disk parameters in the bios for my satellite A200-1The
    This bios does not support changing the parameters of the hard disk for example SATA to IDE?
    BIOS version is: 5.6

    AFAIK in BOS advanced settings you can change mode SATA controller only. You can use the AHCI mode or compatibility.

    I put t understand why do you think you can use IDE mode. What you want to do exactly?

  • How to open my R5-571-59DC to change the hard disk

    Can someone explain how to open my r5 - 571 to change the hard drive for an SSD and increase the ram? Thanks much for any help.

    Course, the R series is similar, my R3 has twelve screws at the back. Once removed, the back is pried off. Doesn't have a lot of strength. Connectors must back spilled up to remove. The cables are delicate so always be sweet.

    PS there is a microphone (interlock) under one of the screws two Center. Machine does not except so depressed, so make sure that screws are tight.

  • Change the hard disk of 1.4 Ghz Mac Mini end of 2014

    Good morning Apple community, so here's the problem: I had a voltage breakdown because via the USB port of an EPSON LX - 300 printer, at present when the USB and the Mac Mini contact, ventilation Mac shutoff valve and after a few tries to do turn it finally do. But I see that a gray folder appears with an exclamation mark, then, with my other mac I download OS X El Capitan and do a Booteable USB, after that I enter the utilities disk and found that the "Macintosh HD" was not there and 2 USB 3.0 also didn't work. I picked up at a technical Service allow in my city and have told me that the HARD drive is broken and must be replaced, they say it could be replace by an of a 7200 rpm or 5400 RPM HARD drive RPM HARD drive, also says that couldn't put an SSD. I start research and found it is possible to put an SSD without problem. So my question is that's for sure, so I trust that an SSD will work with flawessly, and that I will also get a big performance improvement.

    My Mac is:

    Mac Mini end of 2014 1.4 Ghz 4 GB of RAM, Intel HD 5000 and a 500 GB drive HARD 5400 RPM death.

    So, my best regards to the community and hope for a response.

    I've been running my 2014 MM off an external SSD with USB 3.0 since the beginning of this year, after a bunch of trial and error; That's what I have:

    Unfortunately, I don't have much advice to give you else make sure you have a proper forum for IT. From my experience, the bad speaker will make the difference in whether or not the Mac recognizes the SSD on initialize toward the top.

    Good luck!

  • Change the HARD disk in VMWare ESXi 3 Server

    Hi all

    I'm new in the Comunnity. I have the following problem:

    I have a Dell PowerEdge 2950 III with six 7.2 K rpm HDs in RAID 5 running VMWare ESX 3i in an internal USB unit. In this server, I have a virtual machine running a mail server. I have problems of performance of disks in servers and we will change the discs on 15 K RPM drive and change the RAID 10 RAID level. I activated the SSH in VMWare ESXi and my question is: is it possible to copy the virtual machine using Winscp or other method forders, rebuilt my RAID, and then copy these files to VMWare again?

    I'would want to know your suggestions on this matter.

    Thank you very much and best regards,

    Amedina

    You may need to use "add to inventory" since the UUID will be different on the store of data on disks. If we then open the data store with and navigate to the virtual machine. Right click and Add. You answer that you move them.

  • Windows 7 it's without a permit after changing the hard disk (disk image)

    Hello
    I get a frequent reminder of microsoft my pre installed windows in unlicensed. I went through the process of checking online, but this has not helped (prompted him download fails during the installation). I recently installed a new hard drive to a disc image so assume it is related to this. When I check computer / pproperties, all looks fine, it says windows is activated & indicates the product ID.

    Can anyone suggest what I should do to get more of this?

    > I have recently installed a new hard drive to a disc image so assume it is related to this. When I check computer / pproperties, all looks fine, it says windows is activated & displays the product ID

    Retrieve the laptop using the Toshiba recovery disc after the HARD drive was replaced?

    The operating system which is part of the Toshiba recovery image has already been activated so the new activation should not be possible and necessary!

    Don t know what is the problem here, but I recommend you to reinstall the operating system once more using Toshiba Recovery disk (I hope that you have created in the past)

  • If I change the SO or change the hard disk, I lost the warranty?

    HP Pavilion dv7 - 7047cl Windows 7 64 bit

    Yes. HP will send even a new hard drive to install if the disk hard breaks down as collateral.

  • How can I fix a corrupted file cmd.exe and what I do to format the hard drive will that solve my problem and then what I do

    One of my computers has a virus and I'm ready to reformat the drive if I know what to do when I try to go to the command prompt, I get the cmd.exe message is corrupt.

    You could try to copy the cmd.exe file from another XP computer to yours.  It is usually located in the C:\Windows\System32 directory. (Save your current file first, however)  Otherwise, try to start the command-line like this:
    Start-> Run-> "command."
    Note that this should appear "command.com" which is different from the "cmd.exe" (but looks like).

    If you try to reformat the drive to reinstall Windows, simply boot from your Windows XP installation disc and launch the installation.  A reformat is a normal step in a new installation of Windows.

    HTH,
    JW

  • Can I change the HARD drive integrated on my Satellite L50-B-281?

    Hello

    is it possible to change the HARD disk integrated in an SSD? Must be a SATA3 SSD?
    Or it is also possible to install an additional HARD/SSD drive? For example the HARD drive now integrated as a data harvester and a SSD as a system drive?
    Or the DVD player can be exchanged for one SSD?

    Greetings!

    HARD drive can be transformed into SSD and it is the best option, but according to user manuals (to the attached picture) your laptop is not separate from the cover of HARD drive in the lower corner so upgrade disk HARD only is not supported for laptop owners and should be done by authorized personnel only.

    To have full access to the disk HARD lower cover must be removed completely, and if you do it on your own it will void the warranty.
    In my opinion, you should contact the nearest Toshiba service provider and ask for help. This can be done quite quickly and I don't think that it would be expensive.

  • Change of hard disk: System update will work?

    I consider changing my 7200 RPM HD with a new Intel Solid - State Drive 520 series 180 GB. How this will affect the use of the system to update? He will be able to detect and work with my new hardware, or it will stop working?

    Currently I left 725 days my Lenovo warranty. Change of hard disk would probably void the warranty.

    PC: ThinkPad X 1 (1294-2PG)
    5-2520M (2.50GHz), 4 GB RAM, 320 GB HD 7200 RPM, LCD 13.3 in 1366 x 768, Intel 802.11agn wireless, WWAN, Bluetooth, Intel HD graphics card, 1 Gb Ethernet, Ultranav, Secure Chip

    Hello.

    (1) you should have no problem with the update of the system after the upgrade of your player.

    (2) change the Player won't empty your warranty as long as you don't cause damage by improper installation.

    the player is called a "self-service CRU" (CRUS by). If you look at the hardware maintenance manual pg98 (http://support.lenovo.com/en_US/downloads/detail.page?DocID=UM006394), you will see that the disk is not #5 in the exploded view. a page to the bottom, you will see a single * in the RAW Id column for the items in the list #5. Scroll to pg97 and you will see the definition of a "CRU" self-service ".

    HTH a little.

  • my daughter received a comp. from a friend that the hard disk has been deleted how to get windows xp back on it

    I downloaded windows xp from mirowsoft up to 6 discs of A which I just it ready for the cd of window xp I don't have.

    Hi cjoyner66,

    Thanks for posting. I'm confused on 6 discs A you're talking about. Windows XP can not hold on 6 floppy disks if that's what you are referring. If the hard disk has been deleted, you will need to use your Windows XP disk and reinstall Windows using this disk and the key associated with this record. If you don't have XP media, you must contact the OEM of your computer or buy an extra copy of the XP.

    I hope this helps!
    Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • I changed the hard drive and now windows 7 is to say that it is not authentic

    I have a very big problem...

    I changed the hard drive in my laptop because he was dying and move all the files etc on the new hard drive. with the help of a friend of technique. He put his product key on my computer, after that I told him mine is on the bottom of the laptop. Now, I can not change the product key and troubleshooting for the network will not work and the folder of photos I have to right click to 'place to open the folder "... I don't want to format and start over as all my work is on the disc.

    I spend some time on the internet and well I get the thingies "your windows 7 is not valid" and well I'm getting so sick of it. I do what they say and they come up with nothing...

    Can someone please?

    Skarlette

    The common cause for these mismatches is a defective Intel Rapid Storage Tech driver

    Download and install the latest version of...

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=22194

    You need

    iata_enu.exe

    Restart then run another report MGADiag and display the results

  • My previous version of windows (which is already installed on the hard drive) will erase if I boot from a bootable USB. Please help me!

    I have Windows 8 is installed and an iso of Windows 8.1 on my USB.

    My previous version of windows (which is already installed on the hard drive) will erase if I boot from a bootable USB. Please help me!

    When you upgrade to 8.1 Windows it will replace your Windows 8.0. The only way I know to have both is to buy a copy of Windows 8.1 and install on another partition or drive.  Hope this helps and if you need another post to help and we will be happy to help you.

    The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

    "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

  • When you start firefox, pop-up screen wishes to leave firefox to make changes on the hard disk on the computer. I must say yes, or firefox does not start. Next time.

    Is this a problem of firexfox, or something is wrong with my drive? I don't have this problem when you use IE or Opera, Firefox only. I have to let Firefox to make changes to my hard drive, or it does not start. Once I click on Yes, Firefox works. However, when I close Firefox and try to open it again, the thing is repeated with msg popup to change the hard drive...

    Make sure that Firefox is not set to run as administrator.

    Right click on the desktop Firefox shortcut and choose "Properties".

    Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

    • Privilege level: "Run this program as Administrator" should not be selected
    • "Run this program in compatibility mode for:" must not be selected

    Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

Maybe you are looking for