Change the hard disk of 1.4 Ghz Mac Mini end of 2014

Similar Questions

• Cannot change the HARD disk parameters in the Bios on Satellite A200

  I can't change the hard disk parameters in the bios for my satellite A200-1The
  This bios does not support changing the parameters of the hard disk for example SATA to IDE?
  BIOS version is: 5.6

  AFAIK in BOS advanced settings you can change mode SATA controller only. You can use the AHCI mode or compatibility.

  I put t understand why do you think you can use IDE mode. What you want to do exactly?

• Re: Satellite Pro A40 - can I change the HARD disk or the same model?

  Hi Forum,

  do I have to wait for safe trouble by changing the hard disk between the following laptops:

  old or damaged laptop:
  SPA40 model PSA45E - 0013T - number GR
  Series No. 34127882 H

  new/own laptop
  SPA40 PSA45E-001VM-GR model number
  Series N0.34117607H

  Thanks in advance for your advice

  Concerning

  You can do it. No problem at all. Hard drives are not specific model of laptop parts and with hard drives is important compatibility.
  On the new laptop, which you can use different hard drives. Important is that use you compatible HARD drive.

  Just do it. After Exchange of HARD drive install Os again and everything will be OK.

• How to open my R5-571-59DC to change the hard disk

  Can someone explain how to open my r5 - 571 to change the hard drive for an SSD and increase the ram? Thanks much for any help.

  Course, the R series is similar, my R3 has twelve screws at the back. Once removed, the back is pried off. Doesn't have a lot of strength. Connectors must back spilled up to remove. The cables are delicate so always be sweet.

  PS there is a microphone (interlock) under one of the screws two Center. Machine does not except so depressed, so make sure that screws are tight.

• Windows 7 it's without a permit after changing the hard disk (disk image)

  Hello
  I get a frequent reminder of microsoft my pre installed windows in unlicensed. I went through the process of checking online, but this has not helped (prompted him download fails during the installation). I recently installed a new hard drive to a disc image so assume it is related to this. When I check computer / pproperties, all looks fine, it says windows is activated & indicates the product ID.

  Can anyone suggest what I should do to get more of this?

  > I have recently installed a new hard drive to a disc image so assume it is related to this. When I check computer / pproperties, all looks fine, it says windows is activated & displays the product ID

  Retrieve the laptop using the Toshiba recovery disc after the HARD drive was replaced?

  The operating system which is part of the Toshiba recovery image has already been activated so the new activation should not be possible and necessary!

  Don t know what is the problem here, but I recommend you to reinstall the operating system once more using Toshiba Recovery disk (I hope that you have created in the past)

• Change the HARD disk in VMWare ESXi 3 Server

  Hi all

  I'm new in the Comunnity. I have the following problem:

  I have a Dell PowerEdge 2950 III with six 7.2 K rpm HDs in RAID 5 running VMWare ESX 3i in an internal USB unit. In this server, I have a virtual machine running a mail server. I have problems of performance of disks in servers and we will change the discs on 15 K RPM drive and change the RAID 10 RAID level. I activated the SSH in VMWare ESXi and my question is: is it possible to copy the virtual machine using Winscp or other method forders, rebuilt my RAID, and then copy these files to VMWare again?

  I'would want to know your suggestions on this matter.

  Thank you very much and best regards,

  Amedina

  You may need to use "add to inventory" since the UUID will be different on the store of data on disks. If we then open the data store with and navigate to the virtual machine. Right click and Add. You answer that you move them.

• RND4000 - change the hard disks, will that erases data on older players

  I took out the old records and set it asside.

  Then put in some different readers. Different drives are from a NAS RNDX4000 and they initialize automatically.

  I wasn't expecting that.

  Now, if I take on different disks and put the old disks in will I lose all the data?

  I need to still get the data on the old disks. They worked very well.

  I don't want them to be initalized.

  The reason is that the RNDX4000 was struck by lightning. Really wanted to get information out of thoes readers. Now, I don't want to lose the information I had in RND4000 work.

  OS 4.x ReadyNAS all begin with the formatting of disks when they are hot-inserted and in many cases even when they are not hot-inserted.

  But if you turn off, insert the old disks in their original locations, and then powered on, then the system should simply repeat the operation without loss of data or reformatting.

• Move the hard disk to my G5 to mac intel & update?

  I would like to physically move a hard drive from my mac G5 (OS 10.4.11) for mac intel xeon.  Once the HD in the Intel Mac I could use my Snow Leopard installation disc to upgrade this drive to 10.6.8 without problems.  The old operating system will be written to the wire and all my other files remain intact?    Looks like an easy way to migrate from G5 Intel if it works.

  Any help is very appreciated.

  I forgot to mention: the G5 HD I would move out will be a hard drives.  The startup disk is running 10.6.8.

• 200% + CPU Dual Core i7 3.0 GHz 16 GB Mac Mini end of 2014

  Hello

  I just bought Lightroom & Photoshop CC to complete my new Mac Mini. I thought that the specification above would be more than enough for Lightroom flowing normally - given my dual core 2012 MBP 2.5 GHz 16 GB ran Lightroom CC without any problem. However, I'm having a time torrid so far. Everything is extremely slow. Even when simply activate the lines of the grid, I'll have to wait 3-4 seconds for a response. Brushing is a nightmare as well.

  I tried to disable the GPU option, but it has improved things slightly. Perform light tasks is still up 200% of my CPU.

  Anyone know what I can do about it?

  During brushing, you have turned on automatic mask?  Automatic mask is very convenient when you brush next to an edge, but it won't slow the brushing process considerably.  Turn each time that it is not necessary for editing you do.

• If I change the SO or change the hard disk, I lost the warranty?

  HP Pavilion dv7 - 7047cl Windows 7 64 bit

  Yes. HP will send even a new hard drive to install if the disk hard breaks down as collateral.

• How you upgrade the RAM on Mac mini (end of 2014)

  The Support page says it is not accessible, but everything is assembled (without guarantee) just to write this post in Safari with open iTunes I am hitting 3.3 4.0 GB.

  I've always liked Apple since the first iPod came out, but I didn't know that their computers were also disposable.

  I guess I should know better when the price is only a little higher then the Apple TV, I went to buy, but it's the first Apple computer, I buy, and it's better than my Apple TV ver1 who died.

  So when I cut it open I find accommodation from the PIN and what chip will take the 1.4 GHz, 4 to 8 GB machine.

  I guess there is only one slot (pinout) and it is probably welded in.

  No, they were serious

  the RAM is welded in there. You can not remove it.

• Can I change the HARD drive integrated on my Satellite L50-B-281?

  Hello

  is it possible to change the HARD disk integrated in an SSD? Must be a SATA3 SSD?
  Or it is also possible to install an additional HARD/SSD drive? For example the HARD drive now integrated as a data harvester and a SSD as a system drive?
  Or the DVD player can be exchanged for one SSD?

  Greetings!

  HARD drive can be transformed into SSD and it is the best option, but according to user manuals (to the attached picture) your laptop is not separate from the cover of HARD drive in the lower corner so upgrade disk HARD only is not supported for laptop owners and should be done by authorized personnel only.

  To have full access to the disk HARD lower cover must be removed completely, and if you do it on your own it will void the warranty.
  In my opinion, you should contact the nearest Toshiba service provider and ask for help. This can be done quite quickly and I don't think that it would be expensive.

  

• When you start firefox, pop-up screen wishes to leave firefox to make changes on the hard disk on the computer. I must say yes, or firefox does not start. Next time.

  Is this a problem of firexfox, or something is wrong with my drive? I don't have this problem when you use IE or Opera, Firefox only. I have to let Firefox to make changes to my hard drive, or it does not start. Once I click on Yes, Firefox works. However, when I close Firefox and try to open it again, the thing is repeated with msg popup to change the hard drive...

  Make sure that Firefox is not set to run as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

• Satellite Pro L500-1W4 - cannot install Win 7 Pro after changing the HARD drive

  Hi all

  I need assistance with Windows.

  I have a Toshiba Satellite Pro with Windows 7 preinstalled pro and the recovery DVD to downgrade to Windows XP Pro.
  I had to change the hard drive, so I try to reinstall Windows 7 from the recovery CD, but it does not work. He said that it is not possible to install this on this machine.

  So I tried with Windows XP CD recovery and no problem
  I'd rather have windows Windows 7 but I do not know how to retrieve
  Last information, the Windows XP CD recovery came with the laptop that Windows 7 was made by the store who sold me the computer.

  Thank you for your help
  Julie

  As far as I know there is not a kind of limitation and if there is no problem with the original recovery for Win7 disc, you should be able to install it on any HARD disk that you use with your machine.
  I upgraded HDD to the SSD on my installation of picture machine and the restore worked without any problems.

  To be honest, it is not easy to say what the problem is here, but the Win7 installation disc is somehow suspect for me. I don't know what model of laptop you have exactly, but somehow, I feel you didn t get original drive Win7. Best evidence is the Windows XP Home edition recovery disk. The prinziple with Win7 is the same and it should works.

  When you use this disk you should have the menu as shown on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  This document explains how this works with the original installation disc of recovery.

• Impossible to 'System' to defrag Portion of the hard disk on Windows 7 Pro or Windows 8 Pro dvt7-3000

  I have a laptop HP Pavilion dvt7-3000 CTO that has a single disk drive hard 500 GB.  The operating system has been improved in Windows7 Pro (64-bit) to Windows 8 Pro (64-bit), but the problem occurs in both operating systems.  When conducting the defragmentation of the different hard disks (C:\ D:\, HP tools and system), the percent of the "System" drive which is fragmented never changes, while the % fragmented adequately for other readers going to 0%.  Over time, the system part of the hard disk rose to 27% fragmented.  How to defragment this drive?

  Hello

  The system partition contains the boot files and recovery for Windows 7 environment and should not be défragmentée.  It will always appear to be fragmented and it is quite normal - force this partition defragment would almost certainly avoid the Windows startup.  In addition, the fragmentation in this small partition has absolutely no effect on performance.

  For much the same reasons, the recovery partitions or HP_TOOLS must be défragmentées.

  Kind regards

  DP - K