RND4210 ReadyNAS 'your NETGEAR storage space is not accessible from this computer... »

Similar Questions

• I get a message saying "you have exceeded your profile storage space. Yet all the files listed th are actually my docs and application data. How to delete my profile, but not from my pc? increase the max profile size

  I get a message saying "you have exceeded your profile storage space. Yet all the files listed th are actually my docs and application data. How to delete my profile, but not from my pc? increase the max profile size

  1. the first thing to do is to make sure that the computer is completely virus/malware-free. Googling around this error produced quite a few links where the posters were or had been infected with Spyware Protect 2009 rogue.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Once the scanning is complete (do not skip the preparatory stages no more), if the problem persists:

  2. double-click on my computer, right-click the icon for your hard drive, click left to get its properties. If you see options to set Quota management make sure that they are disabled.

  3. in the case - BUT ONLY AFTER YOU ARE sure THAT THE MACHINE IS MALWARE/VIRUS-FREE - copy the lines between asterisks (not including the asterisks) below and paste it into Notepad. Save as undopolicy.reg somewhere, you will find. And then double-click the .reg file, that you have just made to melt in your registry. I hope that this will take care of the issue.

  *****
  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  'EnableProfileQuota ' = -.
  'ProfileQuotaMessage ' = -.
  "MaxProfileSize" = -.
  'IncludeRegInProQuota ' = -.
  'WarnUser ' = -.
  'WarnUserTimeout ' = -.
  *****

  MS - MVP - Elephant Boy computers - don't panic!

• get a message "you have exceeded your profile storage space.

  just change a computer from XP to Vista. Now, get a message "you have exceeded your profile storage space. What is it tell me and how to fix the problume? It gives me a list of the glances as temporary files. I checked the net for answers, but none seem to provide a means of setting or fix this problem. It shows that there are a lot of files in the appdata\Roaming\move networks\QM file *.

  This error occurs usually after a computer has been infected then first make sure the computer is completely virus/malware-free.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Then locate the disk quotas that can be defined. If the machine is clean and there is no set of disk quotas, copy the lines between asterisks a Notepad document and save it as undopolicy.reg. Double-click undopolicy.reg to merge into registry.

  *****
  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  'EnableProfileQuota ' = -.
  'ProfileQuotaMessage ' = -.
  "MaxProfileSize" = -.
  'IncludeRegInProQuota ' = -.
  'WarnUser ' = -.
  'WarnUserTimeout ' = -.
  ****

  MS - MVP - Elephant Boy computers - don't panic!

• You cannot connect because the logon method, you use is not allowed on this computer. Please, see your network administrator for more information.

  Whenever I enter my correct password in my windows account it rejects a message and it comes up saying: "you cannot connect because the logon method, you use is not allowed on this computer." See your network administrator for more information. "I can't seem to be able to enable or disable anything because the profile I'm using on my computer is the profile of"Guest ".

  Karima,

  Applicable to Windows 7.

  The following steps require administrator credentials.

  • Use the Windows + R or "Run" in the start menu, then type gpedit.msc.
  • Navigate to Computer Configuration > Windows settings > local policies > user rights assignment > consider all policies "prohibit the newspaper on" to check if your guest account is listed. Remove account from the list, and you should be fine to continue using your guest profile.

  Good luck.

  James

• Try to activate the Windows Narrator and get your license is not valid for this computer

  I try to activate the Windows Narrator for my son who is visually impaired and all he repeats to me "warns your license is not valid for this computer" I can't find anything that tells me what license is not valid.

  Download and run this tool of validation. If all goes well he will identify what is "not valid", or at least eliminate some possibilities:

  Validate Windows and Office using WGA Diagnostic tool -http://go.microsoft.com/fwlink/?linkid=52012

  Please download and run the tool diagnoses of Genuine:

  • http://go.microsoft.com/fwlink/?linkid=52012.
  • Save to your hard drive (the specifications vary according to the browser)
  • When downloaded, run it (double-click on it)
  • When the utility has finished its run, click on the "Copy" button

  Paste the report into your message here

  If you read this tip and it helps you, please click on the "useful Vote"button to "reward" myself with 'points'! '. Thank you

  Please click propose as answer to let others know the solution that worked for you

  Link to: Silverlight Applets mapping 2003 Menu for applications of office 2010 Ribbon

  Link to: research of 2007 addin commands PS: MS WHERE IS THE 2010 VERSION! HintHint!

  Link to: Menu Flash Applets mapping 2003 2007 Ribbon for all office applications

• The Pro Adobe bought, downloaded the file (with 1, 67MB) on laptop with OS Win8. When you try to install (my memory C: 2.39 GB free) the file, Adobe dialog says "the computer memory space is not enough. This is ridiculous. What can I do?

  The Pro Adobe bought, downloaded the file (with 1, 67MB) on laptop with OS Win8. When you try to install (my memory C: 2.39 GB free) the file, Adobe dialog says "the computer memory space is not enough. This is ridiculous. What can I do?

  Just click on the link acrobat XI and download download Acrobat pro products, acrobat XI | Standard, Pro | XI, X

• the disk you inserted was not readable by this computer

  "the disk you inserted is not readable by this computer" appears time to another, even if no disc is loaded...

  That I can not print, but after restart ok, but later it pop! My iMac has OS X El Capitan version 10.11.4.

  Can you help me with a user very amateur?

  Reset the SMC and LANDAU according to the iMac Intel SCM and reset the PRAM.  If the problem persists then if it please post a report EtreCheck on your system, and we can look for obvious problems. To publish the report, click on the link, download the application and run the report. Then copy and paste the report in your reply to this message.

• HP Laserjet P1102 by USB "the disk you inserted is not readable by this computer.

  My HP Laserjet P1102 used to work properly with OS X10.10. Then he started to say (now I'm on osx 10.11.4) "the disk you inserted is not readable by this computer" whenever I have the lit, but the printer still work. What should I do?

  I tried with this solution HP Laserjet P1102w by USB "the disk you inserted is not readable by this computer ' Ec Capitan osx's option"repair disk permissions ".

  I can't say if it will work, and it may even be harmful, possibly to the point of making your mac unbootable, so be careful - all the least have a clone of your system disk. If you start using the internet (Command-Option-R) recovery mode, and if your mac is a model that existed prior to El Capitan, it could be that the disk utility you get in this collection is the old version, including the order of repair permissions.

• the disk you inserted is not called by this computer

  Whenever I start the computer, it starts flashing on the screen "the disk you inserted was not called by this computer.

  When I booted into it, it shows me the Macintosh HD. I activated the 'first aid' keys and able to diagnose and the result was ok.

  Is - it my Fusion drive is causing the problem?

  Mr. Chua

  Mr. Chua,

  Please post a report of EtreCheck of your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

• Pavilion a010dx x 360: update not validated for this computer

  Whenever I hit find my product and install a graphics driver for the pc detected, the finished download it is not validated for this computer.

  Johan1031 wrote:
  How can I change factory OS? If not, how am I supposed to update my drivers

  HP computers - get HP recovery disks or HP USB recovery disc
  Read this before ordering your recovery discs! (United States and Canada only)
  HP computers - performing a recovery of HP (Windows 8) system
  HP computers - using the Microsoft System Restore (Windows, 10, 8)

• Receive the error message"the update is not applicable to this computer" when you run a Windows Update

  Original title: XP mode on a lenovo w t520 / teacher of WIN 7 and intel VT?

  new computer, no additional software isn't installed, followed all the instructions from Microsoft in order. After having successfully performed the WindowsXPMode_es - are .exe, I try to run the Windows6. 1 - KB958559 - x 64 - RefreshPkg.msu and I get the message: "update is not appliably to this computer" and the exe in XP mode is not located anywhere on the drive.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope this information helps.

• Log on to the method not allowed on this computer

  original title: Error Window Vista.

  You cannot connect because the logon method, you use is not allowed on this computer. Please, see your network administrator for more information. This is the response I get when I try to log on my Windows Vista computer on a domain. I removed all the newspapers deny on policies affecting the comments. Always the same. Can anyone help.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I would also ask you to contact your IT Department.

• Message "Activesync" not found on this computer when you install Fring

  "Activesync not found on this computer", these are the words that then come the fring software setup in this laptop.

  Hello Shailesh1009,

  Windows Vista has no Active Sync. Windows Mobile Device Center has replaced Microsoft ActiveSync in Windows Vista. All the features previously available in Microsoft ActiveSync are available in Windows Mobile Device Center, including the implementation of your partnership office and synchronization with the desktop computer. Read this article for more information:

  http://www.Microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx

  I see that Fring is a Mobile Application. You should try to put your Question to Fring shapes for a better answer for this question. Here is a link that you can follow to ask your question on the Fring Forums, I found:

  http://www.fring.com/forums/

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• laser jet pro M127fw MFP: printer will not print from the computer

  printer works fine until I printed out a spec sheet. 35 a customer through an attachment page.

  now, the does not print from the computer. Everything else works fine. (copy, scan, fax)

  Internet works.  Reset the factory setting on the printer. Everything seems fine on the computer, but when I hit print

  nothing happens.

  Hi @kartman,

  Welcome to the HP forums!

  I read your post on how you can not print with your printer HP Laserjet MFP M127fw, on Windows Vista pro. I'm happy to help you with this printing problem!

  How is the printer connected? Ethernet or USB?

  In the meantime, please try our HP print and Scan Doctorand let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope to hear from you soon and thank you for posting!

• Microsoft enhanced Point and print compatibility driver printer driver is not installed on this computer

  We are running Windows 7 Enterprise 64-bit (using VMware View 6.1) virtual work stations and the connection of users to a printer Xerox 4 Type driver/file being hosted on a Windows R2 server in 2012. The driver on the server is listed as "Xerox WorkCentre 7970 V4 PCL6" and when the user of Windows 7 connects the driver appears as "Microsoft enhanced driver compatibility point and print. In the "Print Management" client Win7, it appears as the 6.3.9600.17415 version

  The Printer works fine during their Windows session, they disconnect you and when they connect in the print queue is still there but when you right click and go to "Printer properties", he throws the following error

  "The printer driver ' improved point and print compatibility Microsoft driver" is not installed on this computer. " Some printer properties will be unavailable, unless you install the printer driver. You want to install the driver now? »

  Deleting the queue and then add it again resolves the problem for Windows session, you're.

  Note: we use Persona management of VMware to save data from the user profile of the disconnections from the virtual offices are non-persistent. I've been able to reproduce this in Windows 7 using a virtual office, I can't reproduce it on my physical Windows 7 machine.

  We get around this by using Group Policy and a vbs script to delete the queue on logoff, then another script to add back on logon, but it's just a band-aid.

  In addition, a Type 3 driver works fine in all of disconnections but we need the Type 4 driver in this case.

  Hello Brian,.

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.