Role of the Manager of GoldenGate

Similar Questions

• Revoke roles in the management of Oracle users

  Hi people,
  I have a question to Management (UMX) Oracle user.
  Is there an API to revoke the UMX user roles. Or can we write our custom code for revoke?
  
  All thought expertise or how managing the current implementations?
  
  Thank you
  Jannat

  Hello

  Please see (Note: 373369.1 - how to assign and revoke the role and responsibility of a user using the standard API?).

  Kind regards
  Hussein

• Managing roles using the solution of the OIM/OAM/OID

  Dear members

  I am faced with confusion while providing the solution about the OAM and OID.

  We have the portal WC system where authentication solution implemented using OAM 11 g. We expect authentication based on roles with the help of OID/IOM.

  I hear, by authentication based on roles, we're essentially the user roles will find in these roles. So they have will go through SSO system and their landing page will be the same. But the controls and links will be displayed according to their role.

  We do not use oracle role manager then manage it using OID.

  Is there a possible solution. Please help me its urgent.

  Thanks in advance.

  
  

  Concerning

  Arun Kumar Singh
  

  Hi Arun,

  In OAM, you can define authorization policies that allow or deny access to resources based on a value of attribute (of the logged in user). For example, you might allow access to the url/admin only to users who have a value of 'Administrator' in an attribute. Another approach is simply to set the attribute as a Variable for header (this is also defined in an OAM authorization policy) so that it is passed to the receiving application, which can then query the value of the attribute and take appropriate action.

  In these cases, OAM is only using the values of the attribute or send them to another application. To manage the values (put them properly for users/applications etc.) you would use a tool like the IOM to ensure that they are properly sized.

  Kind regards

  Colin

• East - the Manager role of provision must combine with Planner or proofreader?

  When I connect the planning application with only the role of "layout manager", the system will display the following error message:

  An error occurred while processing this page. See the log for more details. Please close the current tab, and the application open again

  Cannot synchronize with the provisioning of users. Check the journal planning for more details

  I tried to manually synchronize with the UpdateUsers.cmd command, it was always like this:

  Support RTC Essbase Version: 0xb1221

  Unable to connect to the application: XXXX

  However, if you add a role of Planner or reviewer, he'll be fine without errors.

  BTW: Where can I find the annotation of the error code (such as 0xb1221)?

  Thank you

  Derek

  It will not work, you can not use Provisioning Manager role only to connect to the Planning Application, its a role of SSP available to users. To identify the actual use of the role have a look on:

  Provisioning users and groups in the planning of Application roles

  See you soon... !!

  Rahul S.

• Role of the KVM

  Is it possible to create a KVM in UCS Manager role?

  We use LDAP for authentication and we want to map a group to a role that would only allow KVM access.

  The users in the role of the KVM would be able to see a remote console, the server power to power, attach the brackets (ISO).  But we don't want them to be able to change the settings of the service profile like the addition of the NETWORK card or a policy change.

  Is this possible?  I don't see a built-in KVM role.

  You can create a role called kvm access or what you want to name and then give him the privilege of "service-profile-ext-access." You can then map the role to an ad group.

• OBIEE 12 c - can't see application roles in Identity Manager (online mode)

  We would be able to see Application roles in Identity Manager when it is connected to the repository in online mode?  11 g, after the opening of management > identity, there is an option of Action > Synchronize Application roles.  That option is absent in 12 c.  I don't see any application roles in Identity Manager dialog box.

  I faced this problem in obiee 11g and open a Service request to the support.oracle.com. I got a solution less than an hour. (It was a bug and he suggested me to install a small patch)

  Maybe you could do the same for your problem.

• What is the difference between the role of support and the user role in the business group?

  I know there are a few differences between the role of support and the user role in the business as business group elements and Management group

  editable settings . But I can't find any document that introduces more precisely what they can do, what they can't.

  Are there any articles or documents or other means that can tell the specific differences between the Director, support and user group?

  If you have not taken a glance at this map permissions by GrantOrchard you should. It is very useful to know what permissions each user role. The big difference between the role of support and the user is that the user can only do things for themselves and user support can do things on behalf of other users. There is nothing quite as granular as you specified.

• Assignment of roles to the user when creating the user

  Hi all
  
  I gave a roll deposited (< dsp:input bean = "ProfileFormHandler.value.roles.role" maxsize = "30" size = "30" type = "text" / > on the registration page.) After registration, each field in db except role (table dps_role).
  Pls let me know what I am doing wrong.
  
  Thank you

  You should not assign roles to the user as 'ProfileFormHandler.value.roles.role' of 's profile. You can link formhandler property to which you can pass the name or id of the role that you want to assign role assignment must always route through safety ATG API in order to properly update the mappings of Homeland Security. Because of these dependencies, you should not try the role of simply call profile.setPropertyValue ('roles',...) The code cannot fail this way, but if you assign the role in this way then it may not work as expected when checking for role based privileges. Here's one possible way to do it:

  1. in your file properties formhandler declare a dependency on the directory of the default user, which by default points to the profile database:

  userDirectory = / atg/userprofiling/ProfileUserDirectory

  So, in the form Manager, you declare corresponding setUserDirectory() and getUserDirectory().

  2 then in the formhandler, get the DirectoryPrincipal objects associated with the user profile and the role you want to assign and then assign the role to the user:

  import atg.userdirectory.UserDirectory;
  import atg.userdirectory.DirectoryPrincipal;
  import atg.userdirectory.User;
  import atg.userdirectory.Role;
  import atg.userdirectory.DirectoryModificationException;
  
  import java.util.Collection;
  import java.util.Iterator;
  
  ..
  ..
  
  private boolean assignRoleToUser(String roleName, String userId) {
  
    UserDirectory userDirectory = getUserDirectory();
    DirectoryPrincipal userPrincipal = userDirectory.findUserByPrimaryKey(userId);
    DirectoryPrincipal rolePrincipal = userDirectory.getRoleByPath(roleName);
  
    User user = (User)userPrincipal;
  
    Collection collection = userDirectory.getRoles();
  
    boolean status = false;
  
    Iterator iter = collection.iterator();
    while(iter.hasNext())
    {
      Object obj = iter.next();
      if(obj instanceof Role) {
        Role role = (Role)obj;
        if(roleName.equals( role.getName() ) && user!=null) {
          try {
            status = user.assignRole(role);    //will return true if the role was added otherwise false
          }
          catch (DirectoryModificationException e) {
         //handle exception
          }
          break;
        }
      }
    }
    return status;
  }
  

  In the code above 'roleName' parameter is the name of the role to be assigned to the profile with the id as "userId". If you want to do the role assignment when creating the user, then you can do the things above in postCreateUser() so that you can get the Principal associated with the profile. For more information about the interfaces and classes used here, you can refer to the documentation of the API of the ATG.

  http://docs.Oracle.com/CD/E26180_01/platform.94/APIDoc/ATG/userDirectory/package-summary.html

• Security roles and workflow management groups

  People,

  There is a section on Workflow management groups and security roles in vCloud Request Manager Installation and Configuration Guide - Guide of Directors Chapter 5 and 6. I have difficulty working on the relationship between the two settings.

  My first question is around the goal of the WM default checkbox that the specific guide is used to set the default user workflow management group.

  What would a never used default WM? I mean, what would he ever substitute the other workflow management groups that you define.

  In addition, in the guide, it say cloud Blueprint Admin and Asset Manager security role is a combination of the Admin of Blueprint of cloud and the Asset Manager. Is cloud Blueprint Admin & Asset Manager being the two groups of workflow management, reasonable to assume that a security role is composed of workflow management groups?

  And when I select agent, I do not see a cloud Blueprint Admin and Asset Manager security role listed?

  Finally, is there a way to determine the exact permissions that contains a workflow management group/security role?

  Thank you

  Cormac

  The Group Management (WM) default workflow is largely an artifact of vSM based vRM.

  VSM, a group of WM is a collection of agents used to apply security and route of tasks, among other responsibilities. (For the purpose of vRM, an agent can defined as users who have access to the vRM admin interface).

  vRM mainly use WM groups as a way to deliver relevant communications to users based on their responsibilities for example vCD Admins, Asset Managers etc. vRM does not require other functions related to WM groups.

  For functional reasons, vSM requires that each officer with access to the capabilities of WM belong at least a WM group. In addition, at least one of these groups must be designated the default WM for this officer group. These functional reasons are not immediately relevant to the specific use of vRM rest however case the constraint. Suffice to say for vRM, every WM user must have a WM group by default even if this information must never be used.

  Roles and groups are separate entities. A role defines a set of privileges to access a particular functional area of the admin interface for example a role WM sets permissions to interact with the workflow. of the roles of management (CM) configuration sets permissions to review and modify records in the repository of vRM.

  A special role of WM can be associated with one or more groups WM. When this WM role is assigned to a user, that user inherits groups associated with this role, WM allowing to simplify the administration of groups. An individual user can also have other WM assigned groups to them directly, complementary to those inherited from their role of WM.

  At an abstract level, vRM defines three types of users of the admin interface:

  1 vCD Admins

  2. plan Admins

  3. managers

  However, the security of MSM model requires that each individual user must be implemented with several components. By default, vRM sets a "Asset Managers" WM Group of what assets all managers must belong. However, WM groups cannot be used to give access to the features as well, so a separate from the "Asset Managers" WM role is obliged to grant access to these features asset managers. By default, the role of "Asset Manager" WM is associated with the "Asset Managers" group such that any user who is assigned the role automatically belongs to the Group also. There is also a separate 'Asset Managers' CM role that gives asset managers they need to the repository vRM for example the possibility to add new licenses for software products.

  This model of definitions is repeated for 3 personas above with a group and several roles defined for each. When an administrator assigns a user to one of these characters they should assign the groups and roles appropriate according to the documentation. They should not need to be concerned by the distinctions between each component.

  The role of the "Plan Director Admin and Asset Manager" reflects that a user may need to be asset manager and a Director of Blueprint. Because a user can have a role to the maximum by functional area, vRM provides a compound that provides two sets of permissions. However, a user can belong to several groups WM, so it is never necessary to provide a composite group.

  The role of composite is there; just maybe not where you expect to find. Blueprint Admins do not need to access WM, so there is not a 'Blueprint' Admin or a composite WM role. Blueprint Admins do need access to configuration management so it's an "Admin blueprint" and a role of CM composite.

  The details of the user screen provides:

  • a summary of all groups to which a user belongs

  • provides a 'Détails' button to drill down on each role assigned to the user to inspect the permissions granted by this particular role

  You must be a vCD Admin to see areas of the screen.

• BEA-494002: the current role of the connection is not allowed to use the console

  Versions of the product:
  SOA Suite 11.1.1.4
  WebLogic Server 10.3.4
  
  I create a domain template using model of Fusion Middleware domain generator (< MIDDLEWARE_HOME > \wlserver_10.3\common\bin\config_builder.cmd) with release template.jar
  Characteristics of the source domain:
  -Domain OSB (Oracle Service Bus)
  -a managed server
  -mode of development
  -jrockit JVM
  
  
  When I create a new field using template.jar, start admin server and try to access sbconsole, the lancers of error to follow:
  < 7 July 2011 14:02:45 BRT > < error > < ALSB Console > < BEA-494002 > < internal error occurred in OSBConsole: the current role of the connection is not allowed to use the console action: ' / StatusMessages ' com.bea.alsb.console.common.base.SBConsoleAccessException: the current role of the connection is not allowed to use the console action: ' / StatusMessages.
  at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:88)
  at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
  at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
  at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
  at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.process(SBConsoleRequestProcessor.java:191)
  Truncated. check the log file full stacktrace
  >
  
  Any idea?

  It is an old bug. This bug would be fixed with ALSB 3.0 :)

  Problem: Model ALSB 2.6 Builder does not include certain security files

  Applies to:
  Oracle Service Bus - Version: 2.6 and later versions [Release: Aqualogic Service Bus and later]
  Information in this document applies to any platform.

  Symptoms
  When a model is built from an existing default values area, the JAR file is the following security files:

  DefaultAuthorizerInit.ldift
  XACMLAuthorizerInit.ldift

  So if a new domain is created with the model, sbconsole throws an access control security errors.
  A similar problem occurs when you are using WLST to clone an existing domain.
  When you access the service bus console, he doesn't know that the 'weblogic' default user has administrator permissions.

  You receive the following exception:
  Throwable: com.bea.wli.common.base.SBConsoleAccessException:
  The current role of the connection is not allowed to use the console action: ' / viewAlertSummary '.

  Stack trace:
  com.bea.wli.common.base.SBConsoleAccessException: the current role of the connection is not allowed to use the console action: ' / viewAlertSummary '.
  at com.bea.wli.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:73)

  Cause
  Security policy files that exist in the area were not being grouped in the domain model when you use Model Designer.
  Therefore, the default server policy files were used which are not applicable for ALSB areas.

  Solution
  You can implement the following workaround solution:

  with model generator:
  Ensure that the authorized person of the domain policy files are grouped in the model. This will cause these files to be extracted in the areas newly created (using the template). All new domain ALSB will be ALSB security policy files.

  UN - jar, the template.jar file.
  Copy the two files .ldift of the domain that you used to create the template and paste them into the safety record of the contents of the jar file.
  Re - jar file template.jar and create a domain using the template.

  with WLST:
  While cloning a copy existing domain missing files from the domain you created in the directory of your new domain security.

  Products
  --------------------------------------------------------------------------------
  Middleware > SOA > Oracle Service Bus > Oracle Service Bus

• I have a few email addresses; the Manager is no more funktion

  Hello
  I have a few eMail addresses managed with the Thunderbird Manager.
  Since yesterday, if I run Thunderbird with "Thunderbird.exe Pei" I do not understand the Manager said all the eMail addresses but it starts just to a particular e-mail address.
  It's as if I run cmd then... What's the problem?
  Kind regards

     Klaus
  

  I hope that you do not use the "" off Pei
  It just open run and only type: thunderbird Pei
  If you type the entire address, it must be
  "C:\Program Files (x 86) \Mozilla" PEI

  I hope you didn't have a new profile for each e-mail account? I was a little confused that you were talking about e-mail addresses and no profiles

• The Manager of bookmarks disappeared from Firefox V 7.0.1 using Mac OS 10.7.1; How edit, delete, and rearrange bookmarks?

  No installation to the management (editing, deleting, rearranging) bookmarks appear in the Favorites tab.

  You do not have a menu called view all bookmarks, under bookmarks?

• When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal

  When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal termination of the program."

  This has happened

  A few times a week

  is after update of Firefox 3.6.4

  I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.

• the Manager passwor used always ask if I wanted a password remembered, count about three days, it is most requested.

  I use the password manager. Firefox used to ask if I wanted a saved password. I have some passwords saved in the Manager, but he adds no news because it is more requested

  This has happened

  Each time Firefox opened

  == I've updated firefox

  Make sure that you are not running Firefox mode of private - browsing using Firefox without saving history .
  In private browsing mode that some menu items are disabled (in gray) and some features like the visited links and others are disabled and does not.
  You're in private browsing mode, if you see "tools > stop private browsing."
  See Private Browsing - use Firefox without saving history and http://kb.mozillazine.org/Issues_related_to_Private_Browsing
  .....
  You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  To view all the history settings, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  ---
  http://KB.mozillazine.org/User_name_and_password_not_remembered
  http://KB.mozillazine.org/Password_Manager

• Yoga 2 Pro and the management of energy on earn 10. Yellow 'fix' does not.

  After the upgrade to Windows 10 to the color yellow "fix" included in Lenovo Power Manager, does not work.

  With Windows 8.1, I could see the yellow on-screen transition from mustardie to a more pleasant shade when the Manager of energy was loading. With Win 10, that no longer works even though the energy Manager seems to work ok for other functions.

  Is it me or is this a general problem?

  I uninstalled the Intel graphics drivers and energy Manager and reinstalled in that order, and now everything seems ok. Thank you for your help.