Role of the KVM

Similar Questions

• What is the role of the drivers folder recycler?

  I am a Director in a company, one of my colleagues told me, what is the folder recycled in its score of pilots hard.
  I said it is built by windows XP operating system and is not a threat to your system, but she said that deleted files remain in this folder
  and she can't erase them. She thinks it's someone spy software to store its files deleted to restore them later.

  He would be grateful if someone could tell me the role of the folder recycled in partitions of hard disk and how to explain this to her.

  Thank you

  It's the trash, tell him to empty the trash.  If the files are blocked in the trash, you can delete the Recycle folder and Windows will recreate it when you restart. The command prompt, run the following command:

  RD /s /q c:\recycler

  If you have more than one drive, you will need to you issue the command for each drive, changing the c: with the appropriate drive letter. If you have more than one user on the machine that recycles all the bins will drain.

  John

• What is the role that the user points?

  What is the role that the user points? Who can tell me

  Reoddy

  You will find the information here:

  http://en.community.Dell.com/Dell-groups/new-to-community/f/3511/t/19566154

  Bev.

• The KVM Port configuration series B

  Hello team,

  Is it possible to change the KVM Port for servers UCS B-Series?

  I used WireShark to check that access KVM for B-Series use the same default port as UCS C-Series (2068).  I found the instructions for changing port KVM for C-series.  However, I have found no documentation on the change of this value for B-Series.

  The CLI of the UCS, I tried searching orders local-mgmt thus brought to the system, fabric interconnects and individual blades, but I still could not find something.

  Thank you

  Trevor

  Trevor,

  Given that the KVM is NAT would be through the management interface of the FIs, we do not allow the port to change on the B series.

  Kind regards

  Robert

• play the KVM with windvd

  Is it possible to read files (films) of the KVM using windvd using Windows 7?

  Bob.

  Hi thanks for responding-

  If to chose between

  VCL

  http://download.CNET.com/Media-Player-codec-pack/3000-13632_4-10749065.html

  http://download.CNET.com/Windows-essentials-media-codec-pack/3000-13632_4-10662709.HTML?tag=Dre

  What would you go there?

  Bob.

  If you use VLC Player then you do not need anything anyone else. It includes all the necessary codecs and is absolutely free.

• Required roles for the browser and the homepage customizations DURATION

  Hello

  We are implementing the Fusion Applications on site and made some customizations to the Navigator menu DURATION and content of the home page (AtkHomePageWelcome). We want to give minimum privileges to certain users to make these changes in the future, what are the correct roles for this? Read the security reference manual I understood that the Navigator changes require Application Menu customization to have role, is this correct? What customizations to the site level to the homepage through Page composer? What is the exact role of updating the content of the page?

  We do not want to cede broad Application Developer or administrator applications etc roles just to make these limited changes.

  Thank you

  Joonas

  This post describes the various roles involved in the role of the right level. You can, if you want to watch in the accurate definitions for these roles, for example using APM and build your own role (s) with the appropriate access you want to restrict access for more.

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• difference between the roles of the IOM and the default roles

  Hello

  I would like to know what is the difference between the roles of the IOM and the default roles.

  Thank you

  I forget which, but one of the categories will not be charged in the catalog for available roles apply.

  -Kevim

• Role of the Manager of GoldenGate

  What is the role of the GoldenGate Manager regarding the excerpt/replicat process?  If the Manager/extract/replicate all run, can I stop the Manager? Will be the excerpt/replicat continues to run or it will abend?   If the Manager does not work, can I start manually extract replicat of OS command line?

  Yes that's right, E/R built resilience to continue running and to reproduce even if the Manager is stopped, so this isn't a single point of failure. However, if the Manager does not work then some actions which only Manager to do cannot be done, for example, purge files path or start a dynamic process.

• Role of the Auditor in the authentication of the BONE

  Hi guys,.

  I was wondering if someone could answer what role makes the listener must play in the authentication of the OS, if that's all.

  We connect to the DB connected as user Oracle normally, using "/ as sysdba"-> authentication of the OS. This works even when the listener is out of service.

  So I want to understand how the connection to the DB, except through the listener.

  Thanks in advance.

  Kind regards

  Matt.

  2895087 wrote:

  Hi guys,.

  I was wondering if someone could answer what role makes the listener must play in the authentication of the OS, if that's all.

  Nothing whatsoever

  We connect to the DB connected as user Oracle normally, using "/ as sysdba"---> OS authentication. This works even when the listener is out of service.

  So I want to understand how the connection to the DB, except through the listener.

  It is an interprocess, or 'LEGACY' connection.  It uses any of the listener.

  Google "oracle leave connection."

  Setting up Oracle Net Services

• What is the difference between the role of support and the user role in the business group?

  I know there are a few differences between the role of support and the user role in the business as business group elements and Management group

  editable settings . But I can't find any document that introduces more precisely what they can do, what they can't.

  Are there any articles or documents or other means that can tell the specific differences between the Director, support and user group?

  If you have not taken a glance at this map permissions by GrantOrchard you should. It is very useful to know what permissions each user role. The big difference between the role of support and the user is that the user can only do things for themselves and user support can do things on behalf of other users. There is nothing quite as granular as you specified.

• Managing roles using the solution of the OIM/OAM/OID

  Dear members

  I am faced with confusion while providing the solution about the OAM and OID.

  We have the portal WC system where authentication solution implemented using OAM 11 g. We expect authentication based on roles with the help of OID/IOM.

  I hear, by authentication based on roles, we're essentially the user roles will find in these roles. So they have will go through SSO system and their landing page will be the same. But the controls and links will be displayed according to their role.

  We do not use oracle role manager then manage it using OID.

  Is there a possible solution. Please help me its urgent.

  Thanks in advance.

  
  

  Concerning

  Arun Kumar Singh
  

  Hi Arun,

  In OAM, you can define authorization policies that allow or deny access to resources based on a value of attribute (of the logged in user). For example, you might allow access to the url/admin only to users who have a value of 'Administrator' in an attribute. Another approach is simply to set the attribute as a Variable for header (this is also defined in an OAM authorization policy) so that it is passed to the receiving application, which can then query the value of the attribute and take appropriate action.

  In these cases, OAM is only using the values of the attribute or send them to another application. To manage the values (put them properly for users/applications etc.) you would use a tool like the IOM to ensure that they are properly sized.

  Kind regards

  Colin

• Revoke ROLE on the user table

  Hi team,

  I'm trying to revoke grant on the user table

  The Sub statement gives error saying

  [code]

  REVOKE < role_nm > on < a.table_nm > to < b.user_nm >

  Error: ORA 00990: missing or invalid privilege

  [/ code]

  But the following works fine

  [code]

  REVOKE ALL ON < a.table_nm > to < b.user_nm >

  [/ code]

  Please suggest me to revoke the grant on the user table

  Smile says:

  [code]

  REVOKE on of

  Error: ORA-00990: missing or invalid privilege

  [/ code]

  A GRANT on table is assigned to a ROLE and that ROLE is assigned to the USER. So when you want to REVOKE a specific GRANT what is assigned to a user by ROLE. You must REVOKE any ROLE to the user or REVOKE the GRANTING OF THE ROLE.

• Mapping of the external LDAP user with the role of the Complutense University of MADRID

  Hello WebCenter content masters,
  
  I'm having trouble mapping a group LDAP to the role of the Complutense University of MADRID.
  Let me explain the situation.
  
  I have an external LDAP (Apache DS) with two groups (groupofuniquenames), 'Administrators' and 'Test' and two users 'ldap_admin' and 'ldap_user '. ldap_admin is a uniqueMember administrators and the ldap_test a test uniqueMember.
  
  At the University Complutense of MADRID, I created a custom role 'Test' with privileges "RWD" group 'Public '.
  
  I guess that the external LDAP has been configured successfully as an LDAP authenticator provider - myrealm settings tab, since I can see groups and external LDAP users, and they can connect the DCU with their user id and password.
  
  However, ldap_user is unable to perform the check, and on their profile page, the role is "invited, authenticated."
  And when I pass ldap_user in the test group to the Administrators group, the role is then "invited, authenticated, admin, sysmanager, refineryadmin, rmaadmin, pcmadmin, ermadmin.
  It seems that the Administrators group is mapped correctly, but not the group test.
  
  I try to apply the advice given in these two threads:
  External LDAP user has only priviledge research at the Complutense University of MADRID
  Unable to map external users to roles in content Webcenter 11 g
  
  I have created a 'externalLdapMap' identification card, completed the provider.hda file and put the map "Test, Test". I also tried with "Test, contributor" that I was not sure about the first mapping.
  Whatever it is, after restarting the server of the University Complutense of MADRID, I'm still not able to grant the privilege of writing for a user to the Administrators group.
  
  I missed something in the process?
  Thank you for your attention and of course any help would be greatly appreciated.
  L.

  Hello

  I think that you have enabled the LDAP authenticator credits and that this error will go up.

  You must create an OpenLDAPAuthenticator and do the same settings with flag set up and then test the scenario.

  Thank you
  Srinath

• It is not possible to program the report with a user with the role of the author.

  Hello
  
  I tried to schedule the report using weblogic user (who has the admin role) it worked perfectly. But when I try to log on by using the user (who has the role of the author) and when I try to schedule a report I get the following error. It is clustered environment.
  
  
  [nQSError: 77006] Oracle BI presentation server error: A fatal error occurred during the processing of the request. The server responded with: an authentication failure.
  Error codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
  Geographical area: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
  ODBC driver returned an error (SQLDriverConnectW).
  State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.
  [nQSError: 43113] The message returned by OBIS.
  [nQSError: 13039] The imposter does not exist in the Security Service of BI. (08004)
  
  
  
  Error codes:
  Geographical area: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
  .
  Error codes: AGEGTYVF
  AgentID: / users/richard/Test Mail Report
  ... Retry Agent response content loop... Sleep for 8 seconds. [nQSError: 77006] Oracle BI presentation server error: A fatal error occurred during the processing of the request. The server responded with: an authentication failure.
  Error codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
  Geographical area: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
  ODBC driver returned an error (SQLDriverConnectW).
  State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.
  [nQSError: 43113] The message returned by OBIS.
  [nQSError: 13039] The imposter does not exist in the Security Service of BI. (08004)
  
  
  
  Error codes:
  Geographical area: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
  .
  Error codes: AGEGTYVF
  AgentID: / users/richard/Test Mail Report
  ... Retry Agent response content loop... Sleep for 6 seconds. [nQSError: 77006] Oracle BI presentation server error: A fatal error occurred during the processing of the request. The server responded with: an authentication failure.
  Error codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
  Geographical area: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
  ODBC driver returned an error (SQLDriverConnectW).
  State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.
  [nQSError: 43113] The message returned by OBIS.
  [nQSError: 13039] The imposter does not exist in the Security Service of BI. (08004)
  
  
  
  Error codes:
  Geographical area: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
  .
  Error codes: AGEGTYVF
  AgentID: / users/richard/Test Mail Report
  
  Exceeded number of retries of request for the GetResponseContent method.
  
  
  
  
  
  Can someone help me with this.
  
  Thank you
  Rondo.
  
  Published by: RONDO on December 12, 2012 16:07

  Check Doc ID 1446877.1

  According to the doc Fix to apply the hotfix 13553428:

  The fix for this problem is to apply the hotfix for the following new bug.

  Bug 13553428 - QA:BLK:DELIVER Corp. OID LDAP users FAILED WITH the COPYCAT DOES'NT ARE.

  Patch 13553428: QA:BLK:DELIVER users to Corp OID LDAP FAILED WITH the COPYCAT DOES'NT ARE.

  The patch is available on MOS and can be applied to all platforms.

  Or access via this link:
  https://updates.Oracle.com/Orion/services/download/p13553428_111160_Generic.zip?Aru=14732325&patch_file=p13553428_111160_Generic.zip

  Please refer to the Readme file. It is important to shut down the system before applying the patch. Then restart.
  When you restart Weblogic should automatically detect that bimiddleware.ear has changed to OH and automatically redeploy it the application

  If it helps pls mark as correct

  Published by: VIEREN Srini December 12, 2012 19:39

• Assignment of roles to the user when creating the user

  Hi all
  
  I gave a roll deposited (< dsp:input bean = "ProfileFormHandler.value.roles.role" maxsize = "30" size = "30" type = "text" / > on the registration page.) After registration, each field in db except role (table dps_role).
  Pls let me know what I am doing wrong.
  
  Thank you

  You should not assign roles to the user as 'ProfileFormHandler.value.roles.role' of 's profile. You can link formhandler property to which you can pass the name or id of the role that you want to assign role assignment must always route through safety ATG API in order to properly update the mappings of Homeland Security. Because of these dependencies, you should not try the role of simply call profile.setPropertyValue ('roles',...) The code cannot fail this way, but if you assign the role in this way then it may not work as expected when checking for role based privileges. Here's one possible way to do it:

  1. in your file properties formhandler declare a dependency on the directory of the default user, which by default points to the profile database:

  userDirectory = / atg/userprofiling/ProfileUserDirectory

  So, in the form Manager, you declare corresponding setUserDirectory() and getUserDirectory().

  2 then in the formhandler, get the DirectoryPrincipal objects associated with the user profile and the role you want to assign and then assign the role to the user:

  import atg.userdirectory.UserDirectory;
  import atg.userdirectory.DirectoryPrincipal;
  import atg.userdirectory.User;
  import atg.userdirectory.Role;
  import atg.userdirectory.DirectoryModificationException;
  
  import java.util.Collection;
  import java.util.Iterator;
  
  ..
  ..
  
  private boolean assignRoleToUser(String roleName, String userId) {
  
    UserDirectory userDirectory = getUserDirectory();
    DirectoryPrincipal userPrincipal = userDirectory.findUserByPrimaryKey(userId);
    DirectoryPrincipal rolePrincipal = userDirectory.getRoleByPath(roleName);
  
    User user = (User)userPrincipal;
  
    Collection collection = userDirectory.getRoles();
  
    boolean status = false;
  
    Iterator iter = collection.iterator();
    while(iter.hasNext())
    {
      Object obj = iter.next();
      if(obj instanceof Role) {
        Role role = (Role)obj;
        if(roleName.equals( role.getName() ) && user!=null) {
          try {
            status = user.assignRole(role);    //will return true if the role was added otherwise false
          }
          catch (DirectoryModificationException e) {
         //handle exception
          }
          break;
        }
      }
    }
    return status;
  }
  

  In the code above 'roleName' parameter is the name of the role to be assigned to the profile with the id as "userId". If you want to do the role assignment when creating the user, then you can do the things above in postCreateUser() so that you can get the Principal associated with the profile. For more information about the interfaces and classes used here, you can refer to the documentation of the API of the ATG.

  http://docs.Oracle.com/CD/E26180_01/platform.94/APIDoc/ATG/userDirectory/package-summary.html