East - the Manager role of provision must combine with Planner or proofreader?

Similar Questions

• Yoga 2 Pro and the management of energy on earn 10. Yellow 'fix' does not.

  After the upgrade to Windows 10 to the color yellow "fix" included in Lenovo Power Manager, does not work.

  With Windows 8.1, I could see the yellow on-screen transition from mustardie to a more pleasant shade when the Manager of energy was loading. With Win 10, that no longer works even though the energy Manager seems to work ok for other functions.

  Is it me or is this a general problem?

  I uninstalled the Intel graphics drivers and energy Manager and reinstalled in that order, and now everything seems ok. Thank you for your help.

• Role of the Manager of GoldenGate

  What is the role of the GoldenGate Manager regarding the excerpt/replicat process?  If the Manager/extract/replicate all run, can I stop the Manager? Will be the excerpt/replicat continues to run or it will abend?   If the Manager does not work, can I start manually extract replicat of OS command line?

  Yes that's right, E/R built resilience to continue running and to reproduce even if the Manager is stopped, so this isn't a single point of failure. However, if the Manager does not work then some actions which only Manager to do cannot be done, for example, purge files path or start a dynamic process.

• How can I activate Technicon in adobe elements first 13? I can see it running in the Manager of tasks as elementsautoanalyzer13.exe but didn't interrupt the process in the case where he assigned to the program.  There must be a way inside the adobe progra

  How can I activate Technicon in adobe elements first 13? I can see it running in the Manager of tasks as elementsautoanalyzer13.exe but didn't interrupt the process in the case where he assigned to the program.  There must be a way inside the adobe program to turn off because I turned it on by clicking with the right button on an image in the editor of the first, and then when you are prompted, he said he would run in the background and I said okay, now I can't stop it! .  It appears in earlier versions of first items under Edit-> Preferences-> media analysis you could uncheck it to turn it off.  But there is only a media section and in this tab, there is no automatic Analyzer to be seen.  Thanks in advance for any advice

  Rebeccah

  What computer operating system? You are in the first elements 13/13.1 editor preferences or in organizing elements 13/13.1 preferences?

  Where are you looking for in organizing elements 13/13.1 that you do not see Edit Menu/preferences /-media analysis that you do not see the options of AutoAnalzyer.

  Organizing elements 13/13.1 preferences...

  

  Please point out where you find a command to run AutoAnalzyer in the background in 13/13.1. If I right click a file, I see AutoAnalzyer perform what seems to be a time run command automatic Analyzer of a file.

  Please specify.

  Thank you.

  RTA

• Can I create a hierarchy of topic on the project manager pod or I must rely on the table of contents?

  Hello

  Can I create a hierarchy of topic on the project manager pod or I must rely on the table of contents? I use RoboHelp 9 (although I doubt that the version of the questions).

  Thank you

  Mary

  Hi Mary

  As you do this is by creating folders in the project manager, then create new topics in the files or move the existing entries in the records.

  If you work exclusively in the project manager, you are only able to move a single topic at a time. If you want to move a swarm of topics, open the pod of the list of topics and you can select as many as you want. Then drag the subjects selected to the folder on the project manager pod. Be a little careful when you drag. Often the mouse will pass over a tab at the bottom of the basket, and this can change their minds about you.

  See you soon... Rick

• Managing roles using the solution of the OIM/OAM/OID

  Dear members

  I am faced with confusion while providing the solution about the OAM and OID.

  We have the portal WC system where authentication solution implemented using OAM 11 g. We expect authentication based on roles with the help of OID/IOM.

  I hear, by authentication based on roles, we're essentially the user roles will find in these roles. So they have will go through SSO system and their landing page will be the same. But the controls and links will be displayed according to their role.

  We do not use oracle role manager then manage it using OID.

  Is there a possible solution. Please help me its urgent.

  Thanks in advance.

  
  

  Concerning

  Arun Kumar Singh
  

  Hi Arun,

  In OAM, you can define authorization policies that allow or deny access to resources based on a value of attribute (of the logged in user). For example, you might allow access to the url/admin only to users who have a value of 'Administrator' in an attribute. Another approach is simply to set the attribute as a Variable for header (this is also defined in an OAM authorization policy) so that it is passed to the receiving application, which can then query the value of the attribute and take appropriate action.

  In these cases, OAM is only using the values of the attribute or send them to another application. To manage the values (put them properly for users/applications etc.) you would use a tool like the IOM to ensure that they are properly sized.

  Kind regards

  Colin

• Roles really simplify the management of users?

  I am trying to establish a role where I can add users to become members of the role to execute select statements on another scheme of.
  
  I cut the code to generate the "Grant Select on table_xxx to < new_role >" and run it. The 1600 various odd given that all appear on the new role. I give membership to a user of vanilla with nothing except create session to this role. And the user can select count (*) by means of a simple test.
  
  However, if I directly grant the same access to a table, the user can make a selection in the schema? What gives.
  
  Can you please explain what is happening here or help with what I'm missing here. See you soon.
  
  
  PS: If the granting of 1600 odd selects (for each of the objects) for EACH user is the answer, why anyone would use roles? Still reeling from the discovery that after 11 iteration of Oracle, there are still NO grant select on < schema > < user >.

  You need to activate your role before you start using it.
  Run this query and check:
  Select * from session_roles;

  If the output of the above query is 'no rows selected', this means that you don't have any active role.

  You have two options in this case:
  (1) role play OR
  (2) Alter user role default all;

• The IOM mass loading triggers "user charge" instead of "management role.

  When I run the 'oim_blkld_role_load.bat' script to import a csv file roles, he complains about the "USR_LOGIN" column
  
  It seems that the script triggers the load mass for the user instead of roles...
  
  If someone has already experienced, please let me know? Any help will be appreciated.
  
  Here is what I get when I run it:
  
  
  Done compiling...
  
  Re-enter the password for the user of IOM database:
  **********************************
  Select the entry user load:
  **********************************
  (1) table DB
  (2) CSV file
  (3) output
  
  Enter your option (1, 2 or 3):
  2
  
  Enter the name of the main file that contains the names of all the CSV file to load:
  Master.txt
  
  ERROR == > there is no mandatory column 'USR_LOGIN' in the file 'roles.csv '.
  Fix the problem and restart the utility
  -------------------------------------------------------------------------------------------------

  Hello
  It will ask you the USR_LOGIN.
  Check your file csv as below. Be sure to avoid any space or the new line. Run back to the unix command to validate the csv file.

  UGP_ROLENAME, UGP_NAMESPACE, USR_LOGINUGP_ROLENAME, UGP_NAMESPACE, USR_LOGIN
  CROSS of the DIVISIONAL REQUESTERS1, default, XELSYSADM

  -kuldeep

• [Q] how to build and install an SSL certificate signed for the management of a Cisco 5508 WLC?

  Our security policy requires that all web pages admin must be signed by our CA business. I have successfully implemented a SSL certificate 3rd party Auth Web our WLAN of comments, but I need to install a self-signed certificate for the management of the WLC himself. I followed the instructions here:

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml

  but it was more useful for Web auth. I can't find a specific document explaining how it should be done for the management interface.

  Any help much appreciated.

  (1) Please use a password. Empty passwords regularly give problems.

  (2) you don't recombine the key with the certificate before you download to the WLC:

  Combine the CA.pem certificate with the private key, and then convert the file to a .pem file.

  Type this command in the OpenSSL application:

  openssl>pkcs12 -export -in CA.pem -inkey mykey.pem -out CA.p12 -clcerts
  
      -passin pass:check123 -passout pass:check123
  
      
  
      !--- This command should be on one line.
  
  
      openssl>pkcs12 -in CA.p12 -out final.pem -passin pass:check123 -passout pass:check123
  
      

  Note: In this command, you must enter a password for the parameters -passin' and -passout . The password is set to the setting -passout must match the setting SubscriptionId is configured on the WLC. In this example, the password is configured at the time the -passin' and settings -passout is check123. Step 4 of the procedure in the section download the WLC third certificate of this document deals with the configuration of the SubscriptionId parameter.

  The final.pem is the file that is transferred via TFTP to the Cisco WLC.

  Now that you have the certificate of the third-party CA, you must download the certificate to the WLC.

• How to do the AD role entirely admin

  I have configure Weblogic Server to use AD as a provider of authentication and created groups in AD to use as roles in WCC. I gave the role of WCCAdmins all the permissions in the WCC, but it doesn't have the full Weblogic administrator or any other user permissions I create WLS internal LDAP and designate a member of the Administrators group on WLS. I can't make the announcement a member of the admins group so how can I give the group the full administrator access is COE?

  As part of the installation, you must specify the content by a map server.  This is done in the provider of the user of JPS.

  • Under Administration, click "providers."  Find provider "JpsUserProvider" and click the "info".
  • On the info at the bottom page, click 'change '.
  • In the box "Card identification", enter the name of your card "MapToSysmanager".  Save this and restart the managed server from Content Server.

  I would advise also to make an entry in this map to get through accounts and roles as starting point - otherwise, you'll see questions because your other roles will not be passed correctly.  Your card should look like the following:

  ----

  #Maps all roles

  |#all|,       %%

  #Maps all accounts

  @|#all|,    @%%

  custom roles.

  WCCAdmins, sysmanager

  ---

  Any changes that you make to the card in the future do not require a reboot to take effect.

• Builder Viewer troubleshooting: title ID: account does not have the expected role of "application".

  Good afternoon

  Make my way through the initial round with DPS. Have a professional account, with mulitple Adobe ID, each creating content for their respective publications. When you try to build my first vewier custom, I received the following error message: title ID: account does not have the role of "application" expected.

  

  I went into the accounts of my Adobe Master Account Administration tab.

  For applications and accounts Builder Viewer enabled this Adobe ID of the specific publication.

  

  
  However, the Viewer Builder error continues. Log Viewer generator. Log in to Viewer (with publication specifiction ID) generator. Same mistake. Return to Master Account Administration tab and I see the specific parameters and application generator Viewer for publication ID have not stuck.

  

  When I configure the user again, I see my name in the entry application is always there, but is no longer enabled.

  

  Reactivate, shows up in the active list. Same result. Close the tab account Admin, Admin, account back to the tab is no longer enabled. Any ideas or advice on how to overcome the problems of application of this provision role account? Thank you!

  AM

  Hello

  Just got confirmation of the development team that this problem has been corrected and was deployed to production.

  You can open the administration of accounts and press the checkbox 'Activate' on behalf of the application. Now, it must be registered and working in the generator of spectator.

  With sincere friendships.

  KlaasJan Tukker

  Adobe Systems

• Calculation of the dynamic roles membership

  Hi team,

  I set up a business role "Provision Active Directory" and associated Active "person in access to resources: provision Active Directory' with a valid configured condition." I am also attaching the dynamic role annex default ' default roles Appendix dynamic balance "I configured to run every 1 minute.

  My requirement is - when a new user is created in D1IM, belonging to dynamic roles must be evaluated immediately and the user should will be assigned the role of the company. However in my environment, I see what is happening only when I run the DBScheduler manually. I also set the parameter - QER\Structures\DynamicGroupCheck\CalculateImmediatelyPerson.

  Could someone tell me all the configurations that I might be missing?

  Thank you

  Priya

  Hi Priya,

  the meaning of the 'QER\Structures\DynamicGroupCheck\CalculateImmediatelyPerson' parm config is NOT a recalculation immediately BUT a immediately the creation of recalculation of the DBQueue task.

  Following the DBScheduler must operate and run this task.

  You cannot change this behavior.

  All you can do is to reduce the frequency of the DBScheduler.

  It will be started by a SQL Server Agent job and will run every five minutes (by default).

  You can reduce this time in the configuration of the SQL Server Agent job.

  Best regards

  Steffen

• Firefox is already running but is not responding. The old process of Firefox must be closed to open a new window.

  When I try to open Firefox, I get this message:
  "Firefox is already running but is not responding. The old process of Firefox must be closed to open a new window. »
  I then clicked close firefox, but the problem was solved not so I uninstalled and reinstalled firefox, but it's the same thing.
  At this point, I went to support Mozilla and tried the steps described in the article, "Firefox is already running but is not responsible for - How to fix error message", but the firefox.exe process was not in the processes tab in windows Task Manager. While he was in the Details tab, when I tried to put an end to the process, I received this message:
  
  "The operation could not be completed. Access is denied. "

  What can I do to fix this?

  Thank you.

  Usually when you stop and restart Windows, Firefox is not running and can be started normally.

  Firefox is set to start automatically with Windows? Microsoft has a utility to investigate what is set to happen at startup: https://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  It is possible that something is triggering a process in your default browser and it is the hanging of Firefox. You can try to change your default browser to IE (IE can offer to do when you start) before the shutdown and restart Windows to see if it makes a difference.

• I have a few email addresses; the Manager is no more funktion

  Hello
  I have a few eMail addresses managed with the Thunderbird Manager.
  Since yesterday, if I run Thunderbird with "Thunderbird.exe Pei" I do not understand the Manager said all the eMail addresses but it starts just to a particular e-mail address.
  It's as if I run cmd then... What's the problem?
  Kind regards

     Klaus
  

  I hope that you do not use the "" off Pei
  It just open run and only type: thunderbird Pei
  If you type the entire address, it must be
  "C:\Program Files (x 86) \Mozilla" PEI

  I hope you didn't have a new profile for each e-mail account? I was a little confused that you were talking about e-mail addresses and no profiles

• Tiara dac combined with the NI PCIe-6259 does not send the data

  Hello

  I have a card OR PCIe-6259 & DIAdem 11.2.0 (version 2010) on a windows 7 PC.

  Inputs outputs & analog analog + digital are configured in MAX 9.8.0f0. (Global virtual channels)

  When I run a dac, entered analog works perfectly.

  Outputs analog and digital does not work. Only one of the four analog outputs give the value that has been send.

  In the past, I had the same problems with this version of DIAdem in combination with a third party USB card, but this has been resolved by the new firmware & software drivers.

  Someone who has had similar problems?

  Thank you.

  After trying many things, I finally found the solution.

  In the output ==> pilot ==> options pilot "weighting the digital bus" must be verified.