Roll trackpad Webmatrix 2 does not

Scrolling trackpad (equivalent to the wheel on a mouse) does not work in WebMatrix 2. I have to use the scroll bar to click and drag to scroll. This isn't a problem in other programs, it does not only work in WebMatrix. Any help/advice would be greatly appreciated!

Hello

Run the fixit of the article and check.

Hardware devices do not work or are not detected in Windows

If the problem persists, you can post your query in WebMatrix forums for assistance.

http://forums.IIS.NET/1166.aspx

Tags: Windows

Similar Questions

  • BlackBerry Smartphones Trackpad and keyboard does not.

    Hello. I have a Curve 8520, I got it almost a year ago. Yesterday, an APP ERROR 523 appeared on my screen, and I discovered that an application crashed. So I tried to improve my OS from 4 to 5. He succeeded, but I couldn't scroll press OK. After a couple of hours trying to scroll down, I pressed the OK button. But my trackpad and keyboard does not work well, because when I pressed the home button my BB does not show the home screen, instead, it shows me my directory. Please help me with my problem, suggestions are appreciated.

    Hello and welcome to the community!

    From what you describe, I would recommend a clean OS reload.

    At the top of each forum device, there should be some 'sticky' threads dealing with the level of the OS available for each model. Please use those as a reference as you go along.

    From a PC, you can install any compatible OS package (for example, for your BB model exact number) of a BB via this procedure:

    Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC. You can even use a different OS package carriers simply insert, between steps 1 and 2, the deletion, on your PC, a file named PROVIDER. XML. remember that you remove from your PC, no matter what other packages devices OS BB as having more than one installed on the PC can cause conflicts with this procedure.

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    You can also get the BBSAK (BBSAK.ORG) utility and use it to completely erase your BB (the result will be a 507) and then properly reload your operating system.

    Good luck and let us know!

  • Trackpad and keyboard does not work after upgrade to Windows 10

    Trackpad and keyboard do not work after the upgrade to Windows 10 in Boot Camp on a MacBook Pro in early 2011. So, I'm unable to enter password. How to connect? Can I go back to Windows 8?

    1. you can turn off your Mac and your power it back up and hold the Alt/Option key.

    2. you can also run the following procedures to restore the OS default.

    3. If you use a Mac 2010 to run W10, officially Apple does not support the combination. Older than 2012 Mac is not supported for the W10.

    4. Please see also Boot Camp: the operating system default value .

  • Roller Coaster Tycoon 2 does not run in mode "full screen".

    I tried to change the compatibility mode for each of them and also disabled the themes and as an admin, my drivers are up to date and until the day I'm under wiindows build 7100, one know how to make the racing game in full screen, so there is not 2 inches from each side black?

    Windows 7 RC is build 7100?

    Anyway, if it is black on the sides, have you checked if the resolution of the game screen setting corresponds to your screen resolution?

    What I wanted to say, that if you use Windows 7, it is perhaps a compatibility problem, try the XP Mode Beta (http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0e8fa9b3-c236-4b77-be26-173f032f5159 ) - beware, the download is about 500 MB.

  • Illustrator CC - Trackpad alt + scroll does not work.

    So there happen to be one who draws on a macbook pro without a mouse. This morning I installed Illustrator CC and discovered that scrolling with two fingers up and down while holding the alt key is no longer zoom in and out. There is a new feature where you can pinch to zoom, but this won't cut it for me. So my question is: can I re - enable alt + scroll = zoom for the trackpad? Is this a bug or did they intentially fall this feature. I checked Photoshop CC and alt + scrolling works great for Zoom.

    I contacted Adobe support to try to find the answers to my questions... no help. Finally, I learned that my trackpad was the problem, but I assure the person that I am running the CC and CS6 and my trackpad isn't the problem.

    Anyone else having the same problem? Know any fix?

    Thank you

    Brandon

    Hello world!

    My apologies for the long wait. The zoom issue has been corrected in the version 17.01. Please install the update via your Adobe Desktop App or app by going to help > update.

    More on the release: http://bit.ly/cc1701rn

    Thank you!

  • Equium A300D - Trackpad does not scroll

    Hi all

    I have an Equium A300D, reference PSAKAE-003003KS.
    The trackpad worked OK, but often the function of scrolling stops randomly and I have to stop apont.exe and start again. It would then work OK.
    I am fed up of this thinking if I install new drivers. I have install the driver was Synaptics_Driver_v10_1_8_Vista32.

    Problem is now I can't scroll on trackpad at all (but the cursor responds).

    Have I not the correct driver? I read the previous posts but does not solve this problem.
    Any advice would be appreciated.

    See you soon.

    Have you tried rolling back BONE at times earlier, when it worked correctly?

    Is a active virtual scrolling? Synaptics TouchPad Oeoverride?
    You can also delete the system Synaptics driver and after restart install driver Alps Electric. The same option found under the Advanced Settings feature > the TouchPad settings.
    Please check back the feature.

  • Trackpad MacBook Pro late 2011 does not not after upgrade

    I just update the OS in my MacBook Pro (late 2011) which worked perfectly well 'El Capitan' to 'Sierra '. Everything went, smooth and pleasant. but now, the trackpad is completely erratic, is in itself (such as move and open programs like possessed). I tried several suggestions from apple such as checking for updates, check the settings, delete all the gestures, etc. I'm assuming that the material is very well that was perfectly fine yesterday... any suggestions please help.   -Note; I have to use an external mouse, and the latter is very well.

    Hello Med_,

    Thank you for using communities of Apple Support. It is my understanding that after upgrading to Sierra, your MacBook trackpad has become erratic. I know that my trackpad is an important part of my daily use, I can certainly understand your concern. I'm here to help get this resolved with you.

    You did an excellent job so far! Then I recommend the system management controller (SMC) reset. This system can solve some unexpected behaviors. Follow the steps below:

    1. Stop the Mac.
    2. Unplug the MagSafe from Mac power adapter.
    3. Remove the battery. (Learn about removing the battery in the MacBook and MacBook Pro computers).
    4. Press and hold the power button for 5 seconds.
    5. Reconnect the battery and the MagSafe power adapter.
    6. Press the power button to turn on the Mac.

    The LED on the MagSafe power adapters could change State or temporarily disable when you reset the SMC.

    Reset the management system (SCM) controller on your Mac.

    If the problem persists, test this problem in safe mode. This will allow you to exclude the software as the cause. To help get started in safe mode and additional steps, use the steps and the link below:

    1. Start or restart your Mac.
    2. As soon as you hear the startup tone, hold down the SHIFT key.
    3. Release the SHIFT key when you see the logo Apple appears on the screen.

    After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

    To leave safe mode, restart your computer without pressing any keys during startup.

    Try safe mode if your Mac does not end commissioning

    See you soon!

  • gesture trackpad of three fingers to select text does not work on the sierra

    I have a MacBook Pro (13-inch, mid-2014 retina). After upgrade to sierra trackpad gesture to select text using three fingers does not work. Instead, I saw that now a press and hold your finger and drag to select the text, it's very painful and does not work perfectly as three fingers gesture.

    If by mistake the press with a single finger is lost text selection stop there and have to start over and it also causes mild pain if the selection is long.

    Please let me know if anyone knows how to get the text selection gesture three fingers in sierra.

    OK the solution is already here - https://support.apple.com/en-ae/HT204609

  • MacBook pro keyboard does not work (and trackpad too)

    This message is coming for 1-2 days and im bored. It disappears when I closed and reopened my computer after waiting a while, but it is once again. How the hell can it does not find the keyboard inside the computer? The trackpad is not working. I have no bluetooth keyboard but bluetooth mouse works. How to solve this?

    (If you're wondering, he wrote my iPad im)

    Reopening now the computer will not solve the problem now. I tried 10 - 11 times and it didn't work. I slept, and when I wake up I tried again and it did not work. Now I'm typing this from my computer because I found a keyboard at home. But the keyboard and the trackpad in the computer still do not work. Please quick help. It's kinda urgent.

  • I upgraded to the Mavericks, and now the amine on my trackpad will not work. It works in Chrome, the finder, or MS suite. Only FF does not work.

    The question has pretty much all the details. I am running FF and latest Mvericks and scrolling / / back in the trackpad does not work. I can scroll in any other program, just not FF.

    Try:

    • System Preferences > General > display the scroll bar > choose "always."
  • On my trackpad scrolling does not work after the upgrade to 12.0

    On my trackpad scrolling does not work after update Firefox from version 3.6.28 to version 12. It normally works in Thunderbird, and other applications. It is a Lenovo T61 with XP Service Pack 3 and all drivers up to date. Version 3 seems to have bad memory leaks so I would like to upgrade, but I can't do it without scrolling. I would appreciate any advice.

    Try to change the pref ui.trackpoint_hack.enabled on the topic: page default config-1 to 0 or 1 to see if that makes the work button.

    Close and restart Firefox after changing the ui.trackpoint_hack.enabled preferably.

  • Trackpad which does not and the custom will disable the macbook

    I was watching netflix on my macbook air ive had since August, and suddenly the mouse trackpad responds more in which I mean the mouse does not appear on the screen. So I tried to turn it off, but it says 'preferences interrupted system shut down. I can not turn because the mouse does not move or show. Earlier, it was ok.

    Quit, forcing the abandonment of the system preferences, or turn off the Trackpad. Stop (power off). Power on the Trackpad and start the computer.

  • Click and drag does not work Magic Trackpad 2

    I have a new Magic Trackpad 2, paired to a Macbook Pro (mid-2014). It works for the most part very well, but I have a big problem. Dragging never works well. For example, if I want to move a folder in the Finder to a different location, I used for a click or select, then just drag it to the new location. Now it does not work or works so rarely that it is useless.

    I got the 1 trackpad, and I have no problem.

    Make sure that you are not too much pressure.

  • Force click on Magic Trackpad 2 does not work

    Essentially as it is written, it does not as it is announced, and I do not know if something escapes me here. I checked I have Bluetooth 4 in my system report and click Force is enabled in the previews preferences and which are not. I don't know what else could get in the way. Any help would be appreciated.

    Too bad. Don't know if this will help anyone, but I realize that I have SmoothMouse installed and active trackpad option. Seems that they do not support Force click, so had to disable the trackpad option.

  • When I connect the USB and LAN cable does not my trackpad

    Hey guys how are you.

    When I connect the USB and LAN cable does not my trackpad

    How can I fix this error. Please teach me.

    Which macbook model do you have?

    a USB mouse still works?

    your keyboard still works?

    No matter which USB port you use?

    No matter what USB device allows you to create this error?

Maybe you are looking for

  • I deleted ThotKey by using a third-party tool on my laptop Tecra

    Hello My laptop has been slow. So I used hijackthis and found some suspicious entries. I deleted them. One of them was thotkey. Now my function keys do not work. So FN + F1 to FN + F12 does not work. I have Tecra series with XP 32 - bit OS. Where can

  • Upgrade CPU on SP2100

    I was wondering if anyone can help - im trying to put a new processor in a SP2100 - apparently there are 3 configurations differenct of them being a 1900 p4 type - this particular model is a type of 1800 celeron - so I thought I would try with my old

  • Photosmart c309a don't copy or print

    All-in-one Photosmart c309a printer not copy remotely or print any of the programs on my pc.  It will however print alignment and test pages when I tried the troubleshooting by HP solutions centers, troubleshooting guide.  I can't even print when the

  • Cannot download the software for CLJ 4600 to the new iMac with OS 10.8.5

    I'm trying to set up my HP CLJ 4600 on my new iMac with OS 10.8.5. The printer is visible when I touched the sign in the menu printing & scanning as a close printer +. When the printer is selected, I briefly a message in which he tries to put in plac

  • 10 Windows 7 upgrade problems - uninstall programs

    I have Windows 7 and want to update to 10. After you download the update, I get a message that I need to uninstall Symantec Endpoint Protection, because it is not compatible with the upgrade. I click on the next button, but then it tells me that I ha