Rookie question

Similar Questions

• User experienced Smartphone blackBerry, rookie question

  I grew up on BES and seeks to upgrade the phone to my wife (a moto Q w/verizon using wirelesssync which provides the full synchronization of OTA - email, calendar, contacts, etc. - w/outlook). I understand that without a BES, BIS only synchronizes e-mail (calendar, contacts, etc. should be done via USB?). Here is the rookie question: does BIS for synchronization of full e-mail with outlook (readings, deletions, etc. on the PC or the BB) - or are there other limitations?

  I don't like to lose the full OTA sync, but would be ready to give that up if the synchronization of outlook e-mail via BIS works exactly like the BES. e-mail is an address of @ameritech.net (yahoo). phone would an 8330. Thanks much for the ideas that you can share.

  Not quite acutally.

  BIS does not synchronize or reconcile email 'most'. He left with Gmail, Yahoo and IMAP mail servers. It does not reconcile all mail on the pop server And none of this with Outlook (i, e., if you delete an email in Outlook, it will not be deleted on your BB, except in some configurations of IMAP where Outlook also deletes the message on the mail server, it then reconciles this deletion on the BB.)

  Honestly, if you want full mail reconcile, you should look into an exchange server hosted for her, such as

  http://www.BlackBerryForums.com/banners/exchangemymail2.jpg

  Who help me?

• Wireless rookie - question about mesh wireless internal

  I was asked to help set up a wireless network for a medical center. We have a lot of time before its opening, then it's time to test. I would like to recommend some sort of redundancy between the AP in this time, it will take about 16 to cover the area. Being a medical institution, if a resuscitation access point fails, better if the client devices connect to another. My question, am I right to say that we need a controller to achieve? I built and installed the wired LAN, so here's my chance to build my skills wireless

  Thank you very much

  Ray

  The best way to build redundancy into your wireless infrastructure is to use a concept called "microcells". By installing more APs to the smallest power of radio, you have the luxury to increase the signal strength of nearby access point if it does not. Consider the alternative, which is to install less APs 100% power, but if we fail, you cannot increase the power of APs nearby.

  Now, a controller can adjust automatically is close to the levels of power of the APs when it happens, but it can be manipulated manually in a stand-alone environment.

  Finally, if you have already installed a wireless to 100% of power infrastructure, you can install redundant APs in a standby mode. AP backup monitors the active PA, and it lights up immediately if the active access point fails. You must usually install these APs right next to those involved.

  Regardless of the redundancy used, customers will see a hiccup in service when the AP goes down. This can be avoided, if the new access point roaming must be extremely fast. This will only affect you if you are using time-sensitive applications, and even in this case, it might not be noticed.

  I hope that helps! Let me know if you have any questions.

  Jeff

• Rookie question of Icloud

  So, basically I only want to use iCloud as a return for my iPhone, but I am constantly messages that it is full. I finally understand it's because it's also the backup of my entire library of my iMac. When I go in the iCloud settings on my computer and deselect Photos I get a message saying 'If you stop iCloud photo library, photos and videos that have not been completely downloaded will be removed this Mac... »

  So it is upload photos of the cloud on the Mac? I have manually all my photos imported photo phone, so all I want is currently in Photos. I guess I'm just concerned about things being "removed from the Mac." It will not remove anything currently in my photo library, right? I know I'm ridiculous, that I'm just being paranoid.

  Also, can what file I find all the image files that were imported in Photos?

  Please forgive my ignorance. Thank you!

  This essentially means pictures that you currently have on the Mac, which is uploaded to iCloud, stop downloading if you decide to disable and all the photos of the Mac will be deleted as well.  You can keep what you have already included in iCloud.

  How to use iCloud photo library

• Rookie question of Labview

  Hello again,

  I am trying to change a line in my VI database and have had difficulties.

  The first image (modifysimplesingle) presents the database update works correctly, however, I don't want to simply modify a column value. I read the help document on data update VI, which led me to believe that it is possible to enter a cluster to update the whole line.

  So I tried this (modifysimplecluster) and are slow to achieve success. Am I wrong to interpret this? I also looked at the example provided by Labview, copying their syntax. If I'm wrong, what would be the best way to change a single line, provided that the primary keys and foreign keys sometimes (if that makes a difference).

  Looks like you provide data but not the names of the columns. Provide an array of strings at the entrance of the columns so that the function knows to apply the data for columns that.

• This might be a rookie question, but...

  I have a subscription for the full range, then when I got my Surface Pro 3, I opened another account overall PS/LS. Would I could use only the first account or I need another account because it's another machine?

  Hey bryans21888665,

  At one point the application can be enabled only on a single machine.

  Its not a volume license license a single machine.

  Kind regards

  Nicos

• Rookie question installation, how to install workstation on Ubunto 10.04

  Hi all

  Can someone give me please with the proper way to install VMWre Workstation on Ubuntu 10.04LTS? I believe that everything that I have to do is:

  gksudo bash. / vmware... etc.

  I have to do something before this step? I have the latest version 7, thanks in advance!

  In general, I would all of my wagers day and reboot, if kernel change.

• Rookie question: checking return to operation status

  I'm doing my first powershell script for vmware and I wonder how to check the status of an operation return.  Most of the examples simply assume that everything works as expected

  In particular, I use news-snapshot and remove-snapshot operations.

  If anyone can give me a pointer in the right place in some documents, I'll be happy to leave from there.

  Thank you!

  Pat

  First of all, you can examine the $? and the $error variable.

  PS error handling, see chapter of Tobias here.

  In fact, the complete series is ideal for the new PS users and intermediaries.

  PS you can also use the trap to capture errors and performance/display of return codes and error messages.

  Yasen gave a very good explanation on the use of the trap and the VITK in How to correctly catch the VimExceptions?.

• Rookie Question transparency?

  What I want to do is to isolate an image on a photo and bring it in Flash,for this purpose

  I did experiments with all the the the selection tools. Often it seems to me that I chose successfully the passage of photography I want, but when I put this image in Flash as a .png with a transparent background, the image has a 'halo' around him. Is there a method for gettting rid of this "halo". What I'm doing at the moment is... .the selection of the image I want. Then I copy and paste. Then I trash the original layer. I save the layer which is like a png(8?) with transparency. I use CS4

  Thank you

  Mango58

  you have probably had the white matte option in the dialog box peripheral & Web. To remove it, simply set Matte to zero.

  http://help.Adobe.com/en_US/Photoshop/11.0/WSE07483CE-5D9F-4764-AA48-9DF708AD8479.html

• The image reference

  Hi Expert Vision,

  I just started tinkering with the module Vision and think it's very nice.

  A rookie question I had, with a picture (for example from a grab IMAQdx) reference, I have to connect through all functions, or is permitted to use only the first copy.

  What I really mean is that with normal references the reference itself is constant, and should not be religiously it wire even though all States, etc.

  Please refer to the image that I hope that my request a little more clear. Thank you!

  

  Yes you are right, it is just a normal static reference. Nevertheless, I prefer always connect via all nodes and use registers with shift on the nodes. Just for cleanliness of code.

  And second thing, beware when wire you the Dst vision Image entry live treatment in this case, the reference to output image is equal to Image Dst. If Image Dst is left unwired, the output image is equal to the Src of the Image.

• Table 1 d 2D

  Hello
  It is a very rookie question but I'm having a bit of misunderstanding.
  I have a table 1 d
  For example 1 2 3 4
  And I want to convert it into table 2D with a number of lines and columns.
  For example, 1 1 1 1 1
  2 2 2 2 2
  3 3 3 3 3
  4 4 4 4 4

  I don't know if it has been answered before, I looked through a few related issues. I couldn't find anything.

  Thank you.

  I would just use a loop FOR.

  

• How to capture a video from a home made dvd to use to create a video edited with Windows Movie Maker

  I have a DVD made home to a sporting event that my son has played in. I'm trying to get the DVD video in a file on my PC so that I can use it with Windows Movie Maker. I know how to create and edit a video on movie maker, but I can't seem to figure out how to capture video from this DVD. It is probably a 'rookie' question, but I couldn't find what I needed by using 'help' or 'search', so I hope someone in this forum can tell me how to do this.

  I have a DVD made home to a sporting event that my son has played in. I'm trying to get the DVD video in a file on my PC so that I can use it with Windows Movie Maker. I know how to create and edit a video on movie maker, but I can't seem to figure out how to capture video from this DVD. It is probably a 'rookie' question, but I couldn't find what I needed by using 'help' or 'search', so I hope someone in this forum can tell me how to do this.

  =======================================
  If you're running Vista Home Premium or Ultimate, you can
  be able to import files into Movie Maker directly from the
  DVD... the files you want are in the VIDEO_TS folder and have
  a VOB extension.

  Also... the info is maybe worth a visit:

  DVD Movie Maker 6... in Vista Home Basic
  http://www.Papajohn.org/newsletters/185-DVDtoMM6inVistaHomeBasic.html

  When you insert the DVD in your DVD player... close
  all the windows that can open and then go to... Start /.
  Computer... right click the icon for the DVD player
  is in, and then select Explorer.

  The files you need from the DVD are the. VOB files.
  You will find them in the VIDEO_TS folder. Copy them
  in a folder on your hard drive.

  First... just try to rename one of the. VOB files to
  . MPG or .avi and see if it will matter in Movie Maker.
  If import works... drag the file to the timeline and
  Economy/publication it to .wmv or .avi format. Then...
  Re - import new video film for editing purposes.

  (FWIW... you can probably play the files renamed
  in Windows Media Player to be sure that VOB
  file to edit)

  If you are unable to import the files they need to be converted
  another .wmv format would be a good choice.
  The following free Converter may be helpful.

  SUPER © Simplified
  Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster... it is said):
  Mirror download (direct link) (28.1 MB))

  (FWIW... it is always a good practice to create one)
  System restore point before installing new software)

  After installing the program GREAT... open...
  you will see two small circles at the top left
  corner of the screen... check the UPPER circle.

  Now... Drag/Drop your. VOB files in the current field.

  Output container... Choose wmv...

  Video scale size / no change

  Left, click the Encode button.

  Choice: A Simple Profile / OK...

  Wait...

  (FWIW... I have better luck with video if I'm not
  try to multi-task while a file is being converted)

  When the file is converted, you should find it in...
  Program Files / eRightSoft / Super / exit.

  Or... you can type... CTRL + T.. o open the Save
  Window and choose a backup folder.

  Good luck...

  Also... try the following free software:

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your VOB files on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Development of the theme

  Hey guys,.

  Just a few quick questions on the development of themes.

  1. for the average theme, how to download it if you expect?

  2. in the choice of images and funds, you have to buy images of a place to avoid copyright laws (which is just saving Google images)

  3. If you add sound effects or ringtones, we copyright trouble if you just choose a song on itunes for the ringtone and then distribute it with your theme.

  I think that's it. I know that most of them is rookie questions, but any help would be greatly appreciated.

  Thank you

  1. you get only downloads when your theme is visible. When you release the theme if it's free you will get something like 100-1000 downloads according to how good it looks. For a paid theme, you can get the sales of 2-10. Depends on how long your theme remains in the most recent. After that a medium theme would stop get downloads / turnover to less than the star.

  2. Yes, if you use the equipment protected with all rights reserved. You can however get flicker with CC license stuff.

  3 ringtones can get you in trouble because lawyers for the record labels seek actively for forgery. And they actually do not add any value to the theme in any case and certainly do not change buying behavior.

• Logic of tip insert - using a stored procedure?

  Here's my use case:

  • I have a table called TAGS that has two columns: id (number key, primary) and text (string)
  • the table has a constraint of database set that each text must be unique
  • the table also has a fixed sequence back next id available
  • I created an entity of the DB object and its default View object
  • I also created a page where I display a table read-only based on the View object
  • Finally, I added a text field and a button to the page
  • What I want to achieve is to insert all tags entered in the entry in the table fields, when the button is clicked. Note, however, that the entry field is a comma-separated list of tags, moreover, I have to insert only those tags that are new (to respect the constraint of database), and finally, I would like to use the sequence in insert or orders. Once completed, the page should also be updated.

  My first question is whether a stored procedure is the right way to perform such a step insert logical. If not, what other means must be used in the ADF.

  My second question is to know how to call the stored procedure and pass it the value of the input as a parameter field. I found this article http://andrejusb.blogspot.cz/2011/04/invoking-stored-procedures-and.html, but miss me a few transition points:

  1. How the callGreetingsFunction method call (I just get it that it's a method of the EO generated Java class?) after that the button is clicked?
  2. How to pass the value of the input field in this method as a parameter?

  Thanks in advance for your help.

  Now, what happens if I run it like this:

  A. the procedure is executed after a click on the button

  (B) the page is not updated (I had to do the research to get the new lines are visible in the table)

  C. the constraint is ignored (after discounting there were several lines with unique identification number, but pr is - empty)

  D. nothing has been committed to the database - if I closed the application window and it start again, the lines have disappeared from the table, but addition of new lines used number of increased seq

  E. Similarly, if I did directly inserts into the database, these lines did not appear until I transferred the application

  B. told it page to refresh. And that's usually enough to refresh your ViewObject with: viewObject.executeQuery)

  C. Si the constraint is not enforced for null values. And this has nothing to do with the adf, this is related to oracle db.

  D. you're calling commit.

  E. you must re-run your view object (viewObject.executeQuery ())

  Nevertheless, here is my rookie questions:

  There there a simple way to refresh the page (or just the table containing the data)?

  -How to validate changes (immediately after execution of the procedure)?

  -How is the constraint has been ignored? I am sure it would fail on validation, but I thought that it will be considered even for adding data to the table.

  -Are there a way to update the original Version of the database every time that the page is opened or refreshed?

  -Drag and drop operation Execute like button on your page (or call vo.executeQuery () by program)

  -Drag and drop the operation of posting as a button on your page (or invoke it by programming on the DBTransaction object)

  -ignored for what values? for null values? It is expected, because each null is "unique."

  -Yes, but you probably shouldn't do that for performance reasons, see this: Andrejus Baranovskis Blog: Cache results for ADF iterator property

  Read also this: Andrejus Baranovskis Blog: job ADF and PL/SQL Invocation changes side effect

  Dario

• Hello world!!! Here the recruit again! How is pipeline production in indesign, and the dps new 2015!

  I usted to same articles and folios in indesign 2014 and test in the adobe Viewer! Now, it's a process? The pipeline from production in a few words? And it is posible to create a standard folios for all different sizes correspond to iPad and iPhone resolutions? Thank you very much!!! And sorry for my rookie questions! But I'm in hurry and I even leed several folios for a customer!

  Hi Maurice.

  Account given what you wrote that you must continue to use InDesign CC 2014 to create folios by using the system you know. You can install InDesign CC 2014 parallel to your version of CC 2015 and keep working until you get used to it.

  See creative Cloud offering more choice for Installations. Adobe Customer Care Team to know how to install the previous version of InDesign.

  Neil