Win 8 splash screen

Similar Questions

• Add a shortcut to the Win - 8 splash screen

  I have an Access db on my Pro Surface. I have a shortcut on the desktop pointing to this application. Is it possible to create a tile on the windows start screen 8 this application will run. I can't find a PIN to start anywhere for this application...

  It is a hidden folder.

  Alternatively, you can copy the path, C:\ProgramData\Microsoft\Windows\Start start\program, directly into a hit charms and the search box enter. It will open the path in Windows Explorer.

• Win XP crashes after the splash screen (charge PointSec)

  I have a laptop lenovo t400, which has Pointsec Encryption (6.1.3), and WinXP loaded thereon.

  I ran the update tool think that Vantage Lenovo that has downloaded and installed a number of updates - I didn't run it for centuries.

  Now when I try to start the computer it crashes after the XP splash screen is displayed. Simply, the screen goes black.

  I tried the options Mode safe (include VGA Mode and start with the last successful configuration) without success. Also, they fail to start.

  The flow rate is:

  Power On, screen authentication PointSec, Win XP Splash screen, and then a black screen

  I got successfully into the system using UBCD4Win with pointsec plugin loaded, load a WinPE environment on a USB and allows me to access the C: drive unencrypted (as I've authenticated with Pointsec).

  I'm really stuck for ideas as to the update is the cause of the problem and I'd love to hear some suggestions on how to remedy this situation.

  --

  Additional information:

  The last lines in ntbtlog.txt is:

  Not load the parallel driver live

  Did not load driver bios SM service

  Did not load driver SM bus service

  Loaded driver \SystemRoot\System32\Drivers\Cdfs.SYS

  Search:

  c:\Windows\$NtServicePackUninstall$

  Looks like that Service Pack 3 has been installed:

  File: spuninst\spuninst, inf shows:

  NtServicePackVersionText = "Service Pack 3".
  NtServicePackPreviousVersionText = "Service Pack 2".

  Fixed!

  The problem has been updates to lenovo (probably guilty being the video driver that I presume).

  Using UBCD4Win with pointsec plugin I was able

  * Access to the decrypted c:

  * Restored manually updates to c:\windows\system32 and c:\windows\system32\drivers

  Original files have been found in places like: c:\windows\system32\reinstallbackups\008\DriverFiles

  * Finally, I had to roll back updates of the register who did the updates. UBCD4Win offers a tool to do this: the registry Restore Wizard. He basically just look in c:\System Volume Information System Restore directory and lists all the Restore Points available (Fortunately the Lenovo updates mark a restore point until they run). You can also do it manually using the following instructions:

  http://hypography.com/forums/tutorials-and-how-tos/17193-XP-recovery-instructions-for-UBCD4Win.html

  This makes the system successfully booted.

  I've most definitely will be staying clear after you press the big blue button in the future. It was a nightmare to fix.

• Windows XP hangs at the splash screen, safe mode does not work either

  I've updated my laptop with a windows update and when I went to restart, it crashes just in the start screen.  I tried in safe mode hanging at MUP. SYS and I tried the last known configuration.  So far these options do not work.  I tried Memtest, HDAT2, Ultimate Boot CD tests, chkdsk/p and chkdsk/r, Windows XP, CD recovery and rebuild, tried to start up with each opening of USB port and even tried formatting and installing Windows XP Pro SP2 and Windows XP Home Edition SP1.  So far I have always in step 1, where nothing has solved nothing.

  I noticed that there is a thread here where a person has had the same problem and he said that it has updated its BIOS.  For hours, now I did research on how update my BIOS by creating a bootable disc...  I'm thumbs on a mile it looks. Here is a link to the thread with the person who had the same problem. http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/2b3f344c-F923-4D84-868d-c0be603e601b

  I've been on the forums of Toms Hardware for more than a week with a little support, but so far, nothing has worked. http://www.TomsHardware.com/Forum/253683-45-wont-load-hangs-splash-screen#t916360

  I could use any help we can on it.  It would be deeply appreciated!  My email is * address email is removed from the privacy *.

  Well I tried to Win 7 on a bootable disc.  I followed a bunch of instructions I found on youtube.com, but for some reason that I could not burn to disc.  Kept getting an error even if I followed every perfect step.

  In any case, I watched my CMOS on compensation, but the battery is soldered on.  I just messed with it a little bit to see if it was lost or anything thing but I didn't rip out and one other solder on because I have never done this before.  So I put everything back together, turned on my laptop and it finally starts up the Windows installation screen.  FINALLY!  Thanks for everyone's help and patience.  I guess the battery has lost... but not quite sure.  I left the laptop off for about 4-5 days before I tried to play with the CMOS this morning.

  Daavee, thanks for your help on this.  I learned all troubleshooting and making the ISO.  Have a good Christmas!

• SPLASH SCREEN doesn't show Windows 7 as an option

  original title: SPLASH SCREEN

  HEY HELLO

  I INSTALLED WIN 7 RTM ULTIMATE EDITION

  MY PC HAS 0 2S: WIN XP & WIN 7 IN DIFFERENT PARTITIONS

  WHEN I REBOOTED WIN 7 THE START SCREEN FOR WIN 7 HAS CHANGED IN WINDOWS VISTA

  PLZZZZZZZZ HELP ME TO RESTORE WIN 7 BOOT SCREEN

  SORRY FOR THE BAD ENGLISH

  PLEASE HELP

  Go to start / computer / system properties and check what is installed.  If she says Windows7, I can't explain the message of Vista.  If it says that Vista, so maybe the disc is mislabeled and you have really installed Vista.

  Although it shows like Win Vista, it is a problem of Windows7, because that's what you are trying to install (unless the drive is mislabeled - then you need to get a replacement drive).  Please repost your question in the Forums Windows7:http://social.answers.microsoft.com/Forums/en-US/category/windows7 where Windows7 experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Plan of cloud creative photography: Photoshop starts. Lightroom only. No splash screen

  I have the plan of creative photography of cloud since April 2015. Everything worked fine, then one day, a few months ago, I started not to be able to launch Ligthroom more.

  Symptoms:

  -When I double click the Ligthroom icon on my desktop or when I try to run from the app dnuee, nothing happens. No splash screen, nothing.

  -Note that launch Photoshop well

  In: PC / Windows 10

  I already spent several hours on the subject.

  Here's what I did:

  -disconnection / connected from dnuee, with or without restarting the computer between == > unsuccessfully

  -Rename SLCache and SLstore == > unsuccessfully

  -Uninstall EVERYTHING (all adobe applications on my computer, same cloud Creative, player, air, flash. EVERYTHING). A ran a registry cleaner. Restarted. Reinstalled from scratch, from creative cloud. == > without success. Lightroom does not start. Photoshop does.

  If I look at amt3.log, it says that it cannot find a license:

  02/07/16 10:18:49:211 | [INFO] |  |  |  | uiswitch |  |  | 8376 | Launched
  02/07/16 10:18:49:211 | [DEBUG] |  |  |  | PCDService |  |  | 8376 | No value for key [AdobeUpdaterCodeV2] in hive [{8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}] in master : 10
  02/07/16 10:18:49:211 | [DEBUG] |  |  |  | PCDService |  |  | 8376 | No value for key [AdobeUpdaterCodeV2] in hive [{8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}] in master : 10
  02/07/16 10:18:49:211 | [DEBUG] |  |  |  | PCDService |  |  | 8376 | No value for key [Updates] in hive [{8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}] in master : 10
  02/07/16 10:18:49:211 | [DEBUG] |  |  |  | PCDService |  |  | 8376 | No value for key [Updates] in hive [{8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}] in master : 10
  02/07/16 10:18:49:211 | [WARN] |  |  |  | AUMService |  |  | 8376 | config: No AdobeUpdaterCode found in configuration; AUM will be disabled.
  02/07/16 10:18:49:211 | [DEBUG] |  |  |  | ServiceLoader |  |  | 8376 | looking for library C:\Program Files\Adobe\Adobe Lightroom\updaternotifications.dll
  02/07/16 10:18:49:211 | [DEBUG] |  |  |  | ServiceLoader |  |  | 8376 | Found library C:\Program Files\Adobe\Adobe Lightroom\updaternotifications.dll
  02/07/16 10:18:49:211 | [INFO] |  |  |  | AUMService |  |  | 8376 | IsUpdaterEnabled call
  02/07/16 10:18:49:227 | [INFO] |  |  |  | AUMService |  |  | 8376 | IsUpdaterEnabled call succeeded
  02/07/16 10:18:49:227 | [INFO] |  |  |  | AUMService |  |  | 8376 | Notifications Release call
  02/07/16 10:18:49:227 | [INFO] |  |  |  | AUMService |  |  | 8376 | Notifications Release call succeeded
  02/07/16 10:18:49:231 | [INFO] |  |  |  | ALM |  |  | 8376 | _info_: Deactivation menu is enabled
  02/07/16 10:18:49:233 | [INFO] |  |  |  | ALM |  |  | 8376 | _info_: Deactivation menu is enabled
  02/07/16 10:18:49:237 | [INFO] |  |  |  | AMT |  |  | 8376 | Completed Launch Workflow successfully.
  02/07/16 10:18:49:237 | [INFO] |  |  |  | AMT |  |  | 8376 | Checking client features against cache.
  02/07/16 10:18:49:237 | [DEBUG] |  |  |  | AMT |  |  | 8376 | Feature LightRoom_Mini 6.0 is licensed (was licensed).
  02/07/16 10:18:49:237 | [DEBUG] |  |  |  | AMT |  |  | 8376 | Feature LightRoom_Base 6.0 is licensed (was licensed).
  02/07/16 10:18:49:237 | [DEBUG] |  |  |  | AMT |  |  | 8376 | Feature AMT_RESIDUAL_MODE 1.0 is unlicensed (was unlicensed).
  02/07/16 10:18:49:237 | [DEBUG] |  |  |  | AMT |  |  | 8376 | Feature AMT_SUBSCRIPTION 6.0 is licensed (was licensed).
  02/07/16 10:18:49:237 | [DEBUG] |  |  |  | AMT |  |  | 8376 | Feature AMT_SUBSCRIPTION 7.0 is unlicensed (was unlicensed).
  02/07/16 10:18:49:237 | [INFO] |  |  |  | AMT |  |  | 8376 | Validating client product info against cache.
  02/07/16 10:18:49:237 | [DEBUG] |  |  |  | PCDService |  |  | 8376 | No value for key [ExpirationDate] in hive [V7{}Lightroom-6-Win-GM] in master : 10
  02/07/16 10:18:49:237 | [INFO] |  |  |  | AMT |  |  | 8376 | Remaining duration changed from (was -1, now 10251672).
  02/07/16 10:18:49:238 | [INFO] |  |  |  | AMT |  |  | 8376 | Starting Data Collection for SWTag_Init()
  02/07/16 10:18:49:238 | [INFO] |  |  |  | AMT |  |  | 8376 | DoISOTagging() productCanonicalLEID = V7{}Lightroom-6-Win-GM;outMappedLEID =  V7{}PhotoshopLRCC-1.0-Win-GM, unused = V7{}PhotoshopLRCC-1.0-Win-GM
  02/07/16 10:18:49:238 | [INFO] |  |  |  | AMT |  |  | 8376 | DoISOTagging() productPayloadCode = {8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D};driverPayloadCode =  {8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}
  02/07/16 10:18:49:238 | [DEBUG] |  |  |  | PCDService |  |  | 8376 | Failed to read value for key [EPIC_APP_713] in hive [V7{}PhotoshopLRCC-1.0-Win-GM] from master : 5
  02/07/16 10:18:49:238 | [INFO] |  |  |  | AMT |  |  | 8376 | SWTag_Init() Tags Arguments Adobe Lightroom; V7{}PhotoshopLRCC-1.0-Win-GM; MUL
  02/07/16 10:18:49:240 | [INFO] |  |  |  | AMT |  |  | 8376 | DoISOTagging() License Status = activated
  02/07/16 10:18:49:240 | [INFO] |  |  |  | AMT |  |  | 8376 | DoISOTagging() Tags 960409245187929103853342; 1.0; RETAIL
  02/07/16 10:18:49:240 | [INFO] |  |  |  | AMT |  |  | 8376 | DoISOTagging() Product Version 1; 0
  02/07/16 10:18:49:240 | [INFO] |  |  |  | AMT |  |  | 8376 | AMT: Product License Validated.
  02/07/16 10:18:49:240 | [INFO] |  |  |  | performance |  |  | 8376 | AMTValidateProductLicense took 78.361885 ms
  02/07/16 10:18:49:240 | [DEBUG] |  |  |  | PCDService |  |  | 8376 | No value for key [ExpirationDate] in hive [V7{}Lightroom-6-Win-GM] in master : 10
  02/07/16 10:18:49:240 | [INFO] |  |  |  | SLCoreService |  |  | 8376 | Query license: type = 5, duration = 119 days, remaining = 118 day(s) 56472 seconds.
  02/07/16 10:18:49:240 | [ERROR] |  |  |  | SLCoreService |  |  | 8376 | No value for key [Extended_License_Type] in user dictionary.
  02/07/16 10:18:49:240 | [ERROR] |  |  |  | SLCoreService |  |  | 8376 | No value for key [EXCEPTION_TYPE] in user dictionary.
  02/07/16 10:18:49:240 | [INFO] |  |  |  | performance |  |  | 8376 | AMTObtainRunningLicenseRecord took 0.140389 ms
  
  

  Help would be very appreciated.

  Thanks in advance

  This message was edited by: Guillaume Normand added PC / Windows 10

  Has managed to solve this problem by downloading Microsoft Visual C++ Redistributable 2012 and using the 'repair' option.

  Thanks go to another user on this thread Re: does not start Lightroom CC

• System goes into sleep/hibernation mode suddenly; sometimes THINKPAD Sun splash screen

  I have a type-7EU, put T61P 6460 updated since the original factory with Win 7 and a Corsair SSD.  This problem occurred months after these upgrades.

  Problem as a whole seems to be displayed in many ways, so I don't know what the root cause and whether or not the system can be repaired.

  A few weeks ago, I found that I could not resume after sleep or Hibernate mode.  The system would start to recover, but the screen turns off and the "half moon" icon lit up.  However, instead of going completely to sleep, it seems to begin to restore once again, because the caps lock num lock light flashes and the DVD player would be 'would click,' as they do when first starting the system.

  In other situations, when I first tries to start, the ThinkPAD splash screen is very low.  This happens until I see Win 7 menu to select Win7 or an older operating system to start.  Once I selected Win 7, the screen flashes between normal and total brightness black during the boot process. Usually, the system never ends completely to where I can connect to Windows.

  Or, I can work after 5 minutes or an hour away, and then the system suddenly goes to sleep

  Sometimes, I noticed that the vent near the upper left corner of the system is very hot.  But then I got this problem starting even when the system is off all day and probably cold.

  Alternatively, I can work all day without any problems.

  Can anyone advise on what could be the problem?  I'm looking at a motherboard replacement?  If so, is it possible to buy from an eBay seller?  Any recommendations?

  OK guys, I don't know whether to apologize or grin because I came across a solution.

  I'll try to answer all the answers to this one message.

  I already downloaded the manual equipment, because about two months ago the screen on my T61p cracked badly, during a business trip.  Not good.  And in the coming days, the crack has continued to worsen.  When I got home, I find this manual and did an eBay search to find a replacement screen.  I also find a video on YouTube that shows how to disassemble the 'lid' (once removed from the main system) to change the screen. That everything worked well, except that it took several hours longer than I expected.  Going to pull apart the main system, I removed the wind and the heat sink and blew all the dust.

  The way I solved this problem in all its manifestations, was to RESTORE control Plan for the Plan of power to all of the default values.  I had been playing with some advanced settings and noticed that some advanced settings settings did not share the same parameter values for the Basic setting, things like sleep and will point.

  I can't that speculate that there are a few subtleties modes ensure Intel CPU, which can be programmed for Windows and are persistent through a reset or even a full stop. And I can also speculate that between Windows and the BIOS T61p, there are a few bugs in the way that these settings are configured.

  In any case, once I did the reset to use, I can put my system to sleep or hiberate or close windows and the system still restarts when necessary.  I can also put my system to sleep by closing the lid of the screen and restart opening the cover.

  Everything is good again, and I didn't have to spend the $$$.

  Also, there are several months I upgraded to 8 GB of memory, of using a Crucial element.  Works very well, and I noticed that my MS Office apps now run faster, like Windows (64-bit).

  This is therefore an envelope, I think that, as they say in Hollywood.

  Phil

• GTX 980 and no splash screen

  I have a ti GTX 980 flashed running in a Mac Pro(on external power) 2010. It shows only a splash screen, however, so I attach a No 4 k monitor DVI port. Monitors Dell P2415Q 4 k (except for a random time) show no video until the initialization is complete. This means that I must keep an old DVI monitor on all the time to get not only the splash screen but even to get any video output at all on end of startup. Without a monitor DVI the Dells don't show any video and go mode 'sleep'. Bootcamp Windows 7 displays the same behavior. Any ideas?

  How the P2415Q is normally connected? If you try HDMI then try rather Displayport.

  If your card was flashed did buy you it from MacVidCards? If so, ask them for assistance.

• A double issue of splash screen

  A new Macbook Air configuration, after an attempt abandoned to transfer data from the old to the new mac, I have now two start "screens". It happened because I was prompted to choose a different user account name (probably because there's already the original registered name) so now I start screen one, with a version of my name of account to computer, then followed by a second splash screen, with the slightly modified name. Trying to remove this duplicate, I removed the original in users and accounts and it appears is no longer there, but the splash screen persists, making it necessary for me to register twice to get online. Because I set up all my Web sites, mail etc, I don't want to repeat it. Somehow remove this first splash screen?

  A new Mac comes with 90 days of free technical support, AppleCare.

  Please call AppleCare.

  AppleCare: 1-800-275-2273

• First HP: The first HP splash screen disabling

  I love my first HP but I'm a little tired of seeing the logo of "HP" pop a few seconds every time I turn on my computer.   Is it possible to disable?   (or by shortening the time)
  
  It was ok when I used it just here and there, but now that I use it for hours, it becomes a bit annoying to have to wait few seconds every time that happens.

  Good and bad news.  The bad news is: no, there is no setting that disables the start screen.  The good news is: you don't need to wait for it to go away.  The keyboard buffer becomes active as soon as the ignition, so run some keys you press on during the splash screen when the startup screen goes.  Simply turn on your first and start using it right away, even when the start screen shows.  Nice, huh?

  Hope that helps!  DISCLAIMER: I do not work for HP.

• Light client T520: t520 - how to disable the 'hp' splash screen at boot...

  Hello

  We just bought some HP t520s to complete a lab that we t510s.  The t510s work very well.  The t520s are almost here.  I just need to hide a pesky startup screen.  When the t520 marketing and gets to the GUI, but before that the network is connected, it displays a splash screen telling me that his "waitting for the network.  Unfortunately, this splash screen also has a button called "network settings."  This button, this bad boy is what I want to disable delete or hide.  I don't care if the start screen appears or not, but in giving users access to network settings and host name and all sorts of settings is a waitting accident to happen.

  Does anyone have any ideas as to how I can get rid of this button?  I would really appreciate hints, ideas, comments or words of wisdom on this topic.

  Thanks to you all!

  René

  Try the following: in xterm type regeditor, go to config-Assistant, enablenetworkcheck the value 0, enableupdatecheck the value 0, the network/update dialog box will not be displayed. You must type the value in the value dialog box and click on save before you go to the following registry key. If this does not work as expected please open a case with www.hp.com/go/support

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• Satellite L640 hangs at the splash screen

  Hi all

  I have a L640 / 01 H that I bought earlier this year. In addition to the original Windows 7 OS, I installed a Linux system on a separate partition.

  Earlier today, I was using Linux (which is what I normally use) and everything was really slow.
  Finally I force-shut-down, power button.

  Now, I noticed a problem with the BIOS on this laptop - if I try to start when there is a USB flash drive is connected, the splash screen just hangs. Today when I rebooted I realized that I had left a flash drive, then I got out and I tried to start it again, a couple of times. Whenever the computer crashes just indefinitely on the startup splash screen.

  Finally I gave him enough time and it takes the selection of Linux boot menu, so I tried to start my usual kernel but he gave me some message about a bad MBR.
  I kept trying to start, but the boot process is stuck, what happens is as follows:

  * The three lights on the left (power, battery and light) come on, no problem
  * HARD drive flashes white for a few seconds, then turns off. Occasionally, it will blink again.
  * At the same time, the screen is just stuck on the startup splash screen. If I try to press f2, f12 or any key too many times it will start emitting beeps whenever I press it. There is no way to get into the BIOS settings.

  Also, I can't boot from CD (Windows recovery CD or Linux LiveCD). Finally some kind of time-out of the entry into force, and the computer restarts itself to start the process all. Yay!

  I tried the stuff "unplug the power cord, remove the battery, hold down the power button / stop, plug back in, try to start" but nothing has changed. I also tried switching memory locations (only one chip of RAM, so I can't try a process of elimination on the RAM).
  Finally, I also open the door to HARD disk and removed the HARD drive, then tried to start. This time the BIOS has answered, if only to tell me that there is no appropriate boot media. At this point, the BIOS was responsive and I could change settings in there, but I could not boot from the CD.

  I thought I'd try resetting the CMOS battery, but I'm worried I'll damage something / make the problem worse. Someone at - it ideas? I know that the thing is still under warranty, but service centres are often slow and I don't want to lose the data from the hard drive.

  Any help would be really appreciated.

  > Finally, I also open the door to HARD disk and removed the HARD drive, then tried to start. This time the BIOS has answered, if only to tell me that there is no appropriate boot media. At this point, the BIOS was responsive and I could change settings in there, but I could not boot from the CD.

  It could be a problem with the CD/DVD drive what you think of this idea?
  Perhaps the BIOS does not recognize the CD/DVD drive properly and so there is a problem starting the bootable disc.

  In addition, it might be possible that failures of HARD drive and, therefore, you received an error message about the MBR (master boot record).

  Remove the CD/DVD drive and try to install the Windows booting from a USB flash drive.

  _Regarding the battery CMOS: _
  I would not recommend to disassemble the laptop because you could damage other parts and in addition it should know that the CMOS battery is not removable it s soldered to the motherboard

• Tecra 8200 will not boot - Frezzes on WIN XP startup screen

  Hello

  My 8200 does not start. It works for about 10 seconds (GETS past the screen toshiba then on the winxp splash screen and freezes.)
  Just before that, the screen flickers and then crashes.
  any ideas?

  Hello

  What about new installation of the operating system is Windows XP on the laptop?
  Is it possible to install the new OS?
  If it is not possible to s and installation installation fails then I guess that it s a hardware problem.
  Maybe something wrong with the RAM, HDD, or as suggested above with graphics impossible is nothing

• Tecra 9100 splash screen & installation of corrupt Boot but OK on XP

  Hello

  I just 'inherited' the laptop above and when I got it it had this weird problem. When starting and in "Setup" the display is corrupt. In the start screen, this corruption takes the form of rows of small white lines and dots on any screen, but the screen configuration (or splash screens where you see white low resolution written on a black background) a significant number of characters is defined in the incorrect character (mainly the graphics/Wingding characters.) Corruption exists if the boot & configuration screens are in "Stretch" or not. Its almost impossible to see what the settings are on the installation screen.

  However, if I leave the laptop to continue and to start XP, the screen works great, really clear and non-dead pixels or corruption.

  I tried re-flashing with the latest BIOS (windows method), I F-Disked, then put in shape, then re-installed XP and applied SP2, then all drivers; However, the problem remains.

  Someone has an idea what is the problem?

  Thanks much for any help you can provide.

  Hello

  Sorry, but on this path is not easy to imagine what it looks like, but it's very strange question. I have a similar problem with my Tecra M1. When I watch a video file with Real player and remove the actual window the entire screen is suddenly fuzzy and there are a lot of points with vertical white lines.

  Just restart can fix it. I put really know why this happen and I can't do experiments because I use for work. In my opinion before using the unit to reinstall with the recovery media. On this way the unit will be installed properly and it shouldn't happen.

  If you are recovering the unit and if this action solves the problem please let me know.

  Good bye