Rookie question installation, how to install workstation on Ubunto 10.04

Similar Questions

• Hi, I have a problem in the installation, how to install acrobat 8.1 pro in 64-bit Windows 7 Enterprise is existing in Windows XP.  I just want to transfer the license Adobe pro 8 Windows 7 64 bit. What is the procedure?

  Hi, I have a problem in the installation, how to install acrobat 8.1 pro in 64-bit Windows 7 Enterprise is existing in Windows XP.  I just want to transfer the license Adobe pro 8 Windows 7 64 bit. What is the procedure?

  You need to install 8 AA on the new OS with your current S/N (the license allows 2 installs). After the installation, do all the updates if you expect any chance of 8 AA to run on the system. If the updates will be installed not in the menu help, then go to ftp://ftp.adobe.com/pub/adobe/acrobat/win/ and install updates in the order. People seem to have been successful with 32 - bit systems and some have reported success with a 64 bit system. After installation, print something to the Adobe PDF printer to make sure it works. If this works, you should be in good shape as printing treat the bottleneck. There is a solution, but you shouldn't have it.

  If all works well, then go back to the old machine and disable this installing and uninstalling. Don't forget that your configuration is not supported by Adobe. It seems with every new version of Windows, MS seeks to make the user to upgrade the other hardware and software for compatibility. There may be legitimate reasons for this action, but the game just seems to be Ms.

• How to install workstation on ubuntu platform

  How to install workstation on ubuntu platform?

  When I download the packge, the packge is 'VMware-Workstation-Full - 9.0.2 - 1031769.i386.txt.

  How do I install it on ubuntu system?

  packge installition of Ubuntu is "xxx.deb", so I don't know how to install it. "

  Someone at - it install on ubuntu?

  Pls tell about your experience.

  Thank you.

  Once you have downloaded the correct file as WoodyZ said VMware-Workstation-Full - 9.0.2 - 1031769.i386.bundle be sure to
  

  run $chmod + x VMware-Workstation-Full - 9.0.2 - 1031769.i386.bundle to make the binary executable.  Then you can run

  $sudo. / VMware-Workstation-Full - 9.0.2 - 1031769.i386.bundle

  You can try to move the .txt file to a .bundle file but I would not advise at least maybe the md5sum was identical to the published version. But you should checksum download anyway so why take that chance?

• Creative cloud on another hard drive Installer / how to install CC on another drive?

  Hello

  After a reinstallation of my system (Windows 7) on a SSD drive, my windows system is installed on that last the A:\ letter rack.
  My old system drive serves so pay my data to present and guard the letter C:\.

  Creating cloud installs automatically on the SSD system (A:\). Off following different problem identification, on me comfort to install creative cloud on the C:\ drive pour no longer have to worry about. But how to do given that the program has automatically settle on the A:\
  Thanks for avtrust for your help.

  Hi all

  Can someone tell me how to install Creative cloud on my C:\ Please?

  Is my system drive A:\ and CC is automatically installed on it but my ID do not work and an adobe agent tell me to install it on the C:\ drive.

  Thank you

  julienc82841222,

  Creative Office Cloud app will install only on the main drive (system disk). You can only customize the installation for Creative Cloud app (PS, I, AE and others).

• How to install workstation 7.1.3 to other than the default C drive?

  Hello.

  I just downloaded and installed workstation 7.1.3 and noticed that it didn't warn me as to where I can install it.

  I want to install on a clean win7x64.

  I would like to reinstall drive D.

  Is this possible, if so, then please share how.

  Thank you.

  you missed a step - select 'tailor-made' - you can then select options - one of them being the path

  But why would you do that? -only reason I can think of is to have very little free space in C:

• After the 12 c OEM installation, how to install plugins more?

  I just finished installation OEM SGD 12 c, but forgotten pickup db2 and sql server as the plugins db, how to add those of?
  
  are these plugs ins installed can be used to monitor the db2 /sqlserver dbs?

  You can deploy any post install plugin as well. Read this for instructions: http://docs.oracle.com/cd/E24628_01/doc.121/e24473/plugin_mngr.htm#CHDBGHFE

• Question on how to install ODBC Teradata on CF9 64-bit?

  Need to install the drivers of Teradata on 2 different servers: A Windows 7 64-bit and Windows Server 2008 R2, both running IIS 7.5 and CF 9.0.1 in 64-bit.  Am pretty sure that this must be set up as an ODBC Socket in CF Admin.  I downloaded the drivers 32 and 64-bit Teradata Teradata web site (13, those most recent version).   But have not been installed, or even do anything.

  First of all, it is correct with CF9 64 - bit, in CF Admin, the dropdown to ODBC Socket will be only display 64-bit drivers?  Allowing only ODBC connections using 64-bit drivers?   For example, I was unable to get a 32-bit IBM DB2/UDB ODBC driver will appear in the menu dropdown.  However, the same 64 bit DB2 driver is displayed in the drop-down menu, but when I test the connection in CF Admin, I get a "type mismatch" error message  Have not been able to solve.  Hope that I do not suffer the same problem with Teradata.

  On a server of Windows 7 development to work, I installed the drivers from Teradata 32 bits, but on a 32-bit Windows 7 and CF9.0.1 32-bit server.  After installing and configuring the driver of Teradata 32 bits in the control panel ODBC Data Sources, the pilot DID appear in ODBC Socket drop-down and tested fine.

  But don't know what to do on the 64 - bit and 64-bit CF9 servers?   If someone has been able to install and set up a connection Socket ODBC Teradata on Windows 7 or Windows Server 2008 R2 with success, 64-bit, using CF9 64 bits and IIS, would appreciate any help or advice on what you did to create a successful in CF Admin connection.  Thank you

  Gary

  Problem solved.  Finally, found CF9 64-bit does not support ODBC Socket 64-bit connections.  You will get an "architecture mismatch" error when you try to check the DSN.  But you can create a JDBC for Teradata connection, I did successfully.   Previously, I've never added a JDBC connection, so had to do the research, reading, to see how this is done.  In fact, it isn't too bad once you understand the process.

  Remember, when you add a new DSN JDBC if you don't do it exactly right and know exactly what you are doing, you might damage the file used to start the CF administrator.  This is what happened to me the first time.  I was not able to start CF Admin and lost access to my DSN and couldn't run any. CFM files.

  Before making any changes to DSN in CF administrator, don't forget to save your file "neo - datasource.xml' in your C:\ColdFusion9\lib folder.  You will also lose your. BAK copy of this file, if the CF Admin can not start.  Fortunately, I had a good copy of this file on another computer and copied on my workstation, and CF Admin was able to start.

  I was then able to add the DSN successfully verified and JDBC driver.  I now have my home office work station (CF9 x 64 and Win7 x 64) in Chicago, able to connect to our data warehouse Teradata in Houston, via a VPN connection.  Ran some test queries and everything worked well.

  Hope this helps someone else who's trying to do something similar.

  Gary

• question on how to install more older patch (s) on KB955430.

  Hi, my system is invites me to do a windows update for kb955430.  Newsletter page does not have a vista 32-bit sp1 download (but gives to others) and then you go to the following link to the bottom of the page that says must have this update before downloading the above, so this specific newsletter must have another etc.

  Can someone explain that I have to download?

  I use home edition 32-bit sp1 of vista.

  My windows updates that have been made, go on 8 July 2008 to present when I arrived to this computer.  And on the 3rd ballot this update brings a said must have x update and that update was published until I got my pc.

  The only reason that that concerns me is because windows is prompting me to update

  Thank you very much! :)

  Hi Michelle562,

  Thanks for posting on the Microsoft answers Community Forums.

  According to the http://support.microsoft.com/kb/955430 update. To apply this hotfix on a computer that is running Windows Vista, you must have the update described in KB 937287 installed or you must have Vista Service Pack 1 installed.

  Who says clearly that you already have the prerequisites which is service pack1.

  If this update is invited to install through windows updates.

  What happens when you try to install the update through windows update?

  It gives you an error message during installation?

  Have you tried to install the stand-alone package from the link above Ko?

  However, there is Service Pack 2 available for download. This facility should take care of the issue and also to upgrade the computer

  For more information on Service pack 2

  Information about Service Pack 2 for Windows Vista and Windows Server 2008:

  http://support.Microsoft.com/kb/948465

  You can try to download the standalone package if service pack 2 is not available in windows update.

  Download the stand-alone update: x 86

  Hope the above information helps.

  Kind regards.

  Nicolas Mathieu

  Visit ourhttp://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• A question on how to install grid makes the VIP/SCAN responding to pings

  DB version: 10 gr 2, 11 1 material, 11 2 GR GR
  Operating system: Sun Solaris, AIX
  
  Before you start the Installation of the grid, the VIP or SCAN IP won't ping requests. We can nslookup on these.
  After installation of the rack, the VIP and the IPs SCAN becomes to pings. That made the installer grid? internally to make VIP/SCAN IP address to ping requests

  -What is the installer of the grid? internally to make VIP/SCAN IP address to ping requests

  Intellectual property should be attributed to a n/w interface and this n/w interface must be running for this IP address. Once this is true and seen there is no problem of permissions then 'ping ip' response from the n/w interface.

  Now world Oracle RAC, VIPs and SCAN IPs are virtual IPs and are managed by oracle clusterware. That's why Oracle checks the installation before any of these virtual IP addresses are not being used, then Oracle can assign (start) and management (start/stop/move) these IPs virtual by itself.

  Thus, when starting CRS clusterware began these virtual IPs under "public interface" for a RAC node. Then, once these virtual IPs are assigned to the n/w interface, then makes VIP/SCAN IP address to ping requests.

  Thank you
  Rohit Véronique CHASSAGNE
  http://www.rohitchandok.com

• How to install Webcam without installation CD?

  Hi, I LOVE to video chat and I have my webcam plugged into my computer. But I can't find the disk for the driver or whatever it is called. Well, in any case, my question is, how to install your camera so that you can video chat and all this WITHOUT a driver installation? Thank you! Chloe<>

  Hi Chloe,.
  You will need to download the driver for the webcam Web site editor. You need to the driver so that the camera work, and if you don't have the original disc, then you just need to download it from the site of the camera support.

• How to install Cardbusdriver-Card reader on Satellite M40x?

  Hi all
  I have laptop Satellite M40X-112.
  I downloaded the cardbusdriver reader of card on the Toshiba site.
  So my question is how to install it, I mean what file I have to click to start the installation.

  Thanks in advance.
  BVP

  Have you ever tried with setup.exe?

• How to install Adaptive Filter Toolkit on myRIO 1900 RT target

  Hello
  I'm working on the project of Active noise cancellation. I need to collect audio sampling rate of two microphones @40 k and 100 samples per image and audio through speakers @40 sampling rate k of output. For this, I use myRIO 1900 in FPGA high flow personality.
  When I'm designing the circuit Adatptive Filter Toolkit pallets are available in block VI, but when I'm trying to compile the circuit I get the error message saying that
  "LabVIEW: unable to load the shared library AdaptiveFilters n ensure that the library is present on the target of RT." "Either MAX allows you to install software of OR or FTP to transfer custom RT target libraries.

  I went to MAX OR to install the Adaptive Filter Toolkit, NI MAX--> network environment--> myRIO 1900--> software--> software add-on

  I can't find Adaptive Filter Toolkit or the Digital Filter Design Toolkit.

  I seriously doubt the possibility of using Adaptive Filter Toolkit in the FPGA target, but if I create the FPGA VI by default 'personality', Adaptive Filter Toolkit available palettes only not, but if I'm working on the FPGA VI high flow personality, then the pallets Adpative filter Toolkit are available but I can not compile...

  So, my question is how to install Adatptive Filter Toolkit on myRIO 1900 RT target?

  Is it possible to make custom FTP libraries RT target. I can find the Adaptive Filter library but I don't know which folder should transfer (I tried with several files that I can find but its does not work)?

  Please help me

  Thank you

  If your MAX Configuration looks good.

  After this process: NEITHER myRIO 1900--> software--> software add-on

  choose user Defined Installation you should get the view like the Picuture I added before.

  In find it examples explore, you should be able to get see--> toolkits and Modules--> adaptive filters

  Have you already tried to reinstall the Toolkit Digital Filter?

• How to install NVIDIA video drivers in a free WIN 7 VM on the VM workstation installation

  How to install NVIDIA video drivers in free installation of WIN 7 VM on the VM workstation?  When I try to run the driver installation package I get an error there is no hardware supported, even if the video card is installed and works in the reception of WINNING 10.

  Thank you

  V/R

  NVidia drivers must be installed only when using NVidia devices.
  You do not have in your virtual hardware NVidia machine - that's why he settled on your host computer, but not inside your virtual machine.
  Inside a virtual machine, you have a Videocard VMware - so you must install VMware-drivers.
  Appropriate within a virtual machine drivers will be installed if you install the "vmware-tools".

• How to install VM Workstation v7.1.1 as pure 64-bit 32-bit HOST HOST

  Hello all-

  Thank you for taking the time to read my post.  I've been using VM Workstation since v3 and still use it today.  My host is running Windows 7 Ultimate 64 bit with 4 GB memory and 2 TB of storage.  I also have two video cards.  I run VM Workstation 7.1.1 with no problems but noted that it continues to be installed in the Program Files (x 86) directory my HOST whenever I applied updates, etc..  I always had the impression that this folder, Program Files (x 86) in Windows 7 64-bit is used to install 32-bit applications.  VM Workstation v7.1.1 is supposed to be good for the 32-bit and 64-bit HOSTS.  My Question: How to install VM Workstation v7.1.1 as application HOST 64-bit on my machine?  I think that it is running as a 32-bit application, and I would have run as a 64-bit application.  You can provide any assistance would be greatly appreciated.  Documentation of the user don't give not any what resolution to this issue.  It does not address the installation on the HOST computer, and how to specify an installation pure 64 bit.  An additional side note: My GUEST machines all work in 64-bit with no problems of any kind.  I am running Windows 7, Linux RH Enterprise, Centos 5.3 and Fedora 13.  All are in 64-bit mode and ideal.  VM Workstation is an excellent product!

  Again, thank you for taking the time to read and answer my question.

  Workstation for Windows 64 is a hybrid or however you would call it.

  MISTLETOE is a 32-bit application while the engine that actually will the VMs is 64-bit.

  That's why find you it in the default path of the 32-bit application.

  Check with the Task Manager when a virtual machine works - you'll see vmware.exe 32bits or vmplayer.exe. These two give you MISTLETOE.

  And you will see a vmware - vmx.exe 64-bit who is the applicatiojn who is actually going to virtual machines.

  This means that you don't need to change anything. Mission is already accomplished.

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• How to install an OS using my recovery OEM 64-bit installation CD.

  How to install an OS using my OEM recovery DVD installation I originally created after I have unboxed my portable 64-bit? I initially chose 32 bit by accident, but now I want the 64 bit OS.
  I have a HP Compaq 6715 b Vista Business. I don't have an option to delete my partition and create a new one. I don't have the possibility to choose 32-bit or 64-bit. I had the opportunity to choose 32-bit or 64-bit on the initial installation when I it unboxed and put in place.  How can I get to the screen that allows me to choose between 32-bit or 64-bit?

  Help, please. Thank you.

  Jimmy

  Hi, Jimmy:

  I don't know the answer to this question, but if you live in the USA/Canada, you can order a set of Vista recovery disks and you should get a 32 and 64 bit DVD so much software.

  Call HP at 1-800-334-5144 and ask to order a set of recovery DVD.  Be sure to let you know you want the 64-bit disk (but I think you get to the time in any case).

  It costs $10.00 per post.

  Paul