rooting help

Similar Questions

• Another install dir

  I try to install TimesTen on a machine of redhat on which I don't have root access.
  
  The installer wants to put data in/etc/TimesTen, even when I specify a different root help dir
  
  ./Setup.sh-alt_rootdir ~.
  
  Is there a way to get around this?
  
  Thank you
  Sam

  TimesTen Installer requires that the/etc/TimesTen directory exists and that the user who runs a TimesTen installs is able to write to a file called "instance_info" that are there. The creation of this directory and the permissions necessary for it are documented in the installation of TimesTen Guide. There is only a small file created; the registry, which records details of each TimesTen installation on the machine. This is especially mandatory for Setup there is not (supported0 average around this that I'm afraid; you need to somehow get this directory is created and the correct permissions assigned. As part of this, you also have to choose/create one specific group of o/s installation of TT group and make sure that all users who need to install their own copy of the TT is a member of this group. Yet once, it is all documented in the Installation Guide.

  Kind regards

  Chris

• Reading of sheet TDMS root - need help

  Hello

  I'm quite new to TDMS files. I have a sample file with 2 sheets in which a leaf is referred to as root worksheet and another datasheet (concept of the point of excel sheet). I have some information to read (Raw 5) of the first journal (root) in LabVIEW. I tried with PDM with LabVIEW libraries, but I could only read the data. I also tried with excel fuctions I could open this file in excel, but without success. , I have attached the sample here file.

  I would really appreciate if anyone of you could help me to read that particular line.

  Thanks in advance,

  Manu Mohan

  LipingZhao wrote:

  From your description, I don't know what data you want to read. You said "I have some information to read (Raw 5)", do you mean "line 5"? I used the Viewer files TDMS look at the attached file and the file is OK. Have you tried to use the TDMS files Viewer? Can you tell me what part of the data that you want to get the opinion of the viewer of TDMS files (for example, you can attached a screenshot to note)?

  Thank you for your information about "TDMS File Viewer". I wanted to read line 5. Sorry for typo's fault. I created a new VI that will do what I said.

• My device used to be included in the device under the turbine BP & COM port section manager now it is hub USB root and I can't connect with my camera. Help

  I have a machine that uses a USB to serial connection, after I installed the driver in my computer, it finds the machine and load the device in the ports COM & LPT, but this morning for some reason, he shot my device in the USB root hub system. How to get out of there and recognized him as a COM & LPT device since it is a USB to Serial Port that I can discern the number COM port so that my computer can communicate properly?

  Hello
  
  1. What is the model and brand of the device?
  2. do you see any red or yellow bangs in Device Manager?
   
   
  a. in device, right-click on the Device Manager and select Properties.
  b. now in the Properties window, click on the tab General Post back the message found underdevice status.
  
  Open the Device Manager

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Help: ora-15038 when run root.sh

  OS: Enterprise Linux oracle 6.4

  DB: database oracle 11.2.0.1

  After the grid install oracle rac, run /u01/app/grid/root.sh

  Description

  Ask Questions, get help and share your experiences with this Article

  Occurrence

  Symptoms

  Workaround

  Patches

  History

  References

  --------------------------------------------------------------------------------

  Applies to:

  OS Linux

  Oracle Database - Enterprise Edition - Version 10.2.0.1 to 11.2.0.4 [version 10.2 to 11.2]

  Linux x 86-64

  Haansoft Linux x 86

  Description

  After leveling SAN 'IBM NSeries N7950T - Data ONTAP 8.0.2P3' firmware 'BM NSeries N7950T - Data ONTAP 8.1.1' firmware, ASM starts cannot be mounted because of errors the next:

  SYS@+ASM2 > alter diskgroup DATA11G mount.

  change the mount diskgroup DATA11G

  *

  ERROR on line 1:

  ORA-15032: not all changes made

  ORA-15017: diskgroup "DATA11G" can not be mounted.

  ORA-15063: ASM discovered an insufficient number of drives for diskgroup

  'DATA11G '.

  ORA-15085: ASM disk "" the size of incompatible sector.

  ORA-15085: ASM disk "" the size of incompatible sector.

  ORA-15085: ASM disk "" the size of incompatible sector.

  ORA-15085: ASM disk "" the size of incompatible sector.

  ORA-15085: ASM disk "" the size of incompatible sector.

  --------------------------------------------------------------------------------

  Ask Questions, get help and share your experiences with this Article

  You want to explore this matter further with other customers of Oracle, Oracle employees and Industry Experts?

  Click here to join the chat where you can ask questions, help others and share your experiences with this particular article.

  Check out the discussions on other articles and useful topics by clicking here to access the Homepage My Oracle Support community for installation/update of database.

  Occurrence

  (A) origin configuration:

  1 ASM RAC 11.2.0.3.

  2 ASMLIB installed API

  3 Linux 64-bit

  4 IBM NSeries N7950T - Data ONTAP 8.0.2P3 (firmware update)

  5 starts have been created on disks for the 512 byte sector.

  (B) the problem started on the new configuration 'IBM NSeries N7950T - Data ONTAP 8.1.1':

  1 ASM RAC 11.2.0.3.

  2 ASMLIB installed API

  3 Linux 64-bit

  4 IBM NSeries N7950T - Data ONTAP 8.1.1 (firmware update)

  5 starts have been created on disks for the 512 byte sector.

  Note 1: The problem can occur on any version of ASM (10.2.0.1X to 11.2.0.X).

  Note 2: The problem can occur on any release ASMLIB.

  Note 3: This problem can occur with any other provider of storage, if the firmware update changes / changes physical_block_size = 4 096 bytes (4 KB).

  (C) this is a problem with "logical_block_size" are present now drives = 512 bytes and "physical_block_size" = 4 096 bytes (4 KB) because of follows her SAN firmware upgrade:

  Before the updated firmware to the storage device:

  # cd/sys/block/dm-21/tail

  # more * block_size

  ::::::::::::::

  logical_block_size

  ::::::::::::::

  512

  ::::::::::::::

  physical_block_size

  ::::::::::::::

  512

  After the update of the storage device firmware:

  # cd/sys/block/dm-21/tail

  # more * block_size

  ::::::::::::::

  logical_block_size

  ::::::::::::::

  512

  ::::::::::::::

  physical_block_size

  ::::::::::::::

  4096

  This problem occurred because of storage the device firmware has been updated. The old firmware reported size of logical block of 512 bytes / 512 bytes physical block size, after the upgrade, the new firmware reported, 4096 bytes physical block size / size of 512 byte logical block. Therefore, a diskgroup created with 512 bytes blocks now suddenly work on a device to report areas of 4 096 bytes. Why ASM will refuse to import/up the diskgroup (s).

  In other words, the logical sector size is presented = 512 bytes and the physical size of area presented = 4 096 bytes (4 KB), it is not supported by ASMLIB API at this time.

  (E) despite the ASM starts were created on 512-byte sector size disks, ASM detects disks ASMLIB with a = 4096 bytes (4 KB) sector size instead of a size of sector = 512 bytes, this inconsistency is causing the issue (ORA-15085: ASM disk "" is the size of sector incompatible.):

  + ASM > select v$ asm_disk group_Number, disk_number, sector_size path

  .

  GROUP_NUMBER DISK_NUMBER PATH SECTOR_SIZE

  ------------ ----------- ------------------------------ -----------

  ...

  0 75 ORCL:TMSTS01_LUN010 4096

  (E) but if the ASMLIB is disabled/bypassed (ASM_DISKSTRING = "/ oracleasm/dev/discs / *'"), then the disks are presented/detected with a sector size = 512 bytes:

  + ASM > select v$ asm_disk group_Number, disk_number, sector_size path

  .

  GROUP_NUMBER DISK_NUMBER PATH SECTOR_SIZE

  ------------ ----------- ---------------------------------------- -----------

  ...

  / dev/oracleasm/disks/TMSTS01_LUN010 0 75 512

  (D) this problem is due to update the Firware SAN and the next bug ASMLIB (ASMLIB enhancement):

  ? Bug: 13999609 - REPORTED PHYSICAL BLOCK SIZE CAN CAUSE PROBLEMS WITH DATA 10 G databases

  ? oracleasm pilot (ASMLIB) from today works in the expectation that the logical block size and the physical block size are 512/512 bytes. This particular/firmware storage seems to be, then the configuration will not work with the oracleasm driver.

  ? We understand that size of 4K sector disks must be supported, so we are working on a solution of development of ASMLIB.

  ? Therefore, currently, this update of the firmware of the SAN is not certified and is not supported with ASMLIB.

  Symptoms

  Error description:

  15085, 00000, "ASM disk \"%s\"has inconsistent sector size. »

  * Cause: An attempt to mount a diskgroup failed because a drive reported

  value of incompatible sector size.

  * Action: Use disks with sector size compatible with the Diskgroup sector size,

  or ensure that the operating system can properly report the disk

  sector size.

  //

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• I need help pass my Photoshop 7 from my old laptop to my new laptop running Windows 7 Enterprise.  I tried two routes in vain.  I have the installation CD, there no AutoPlay.  I run Autoplay.exe in the root directory, I'm greeted, I ch

  I need help pass my Photoshop 7 from my old laptop to my new laptop running Windows 7 Enterprise. I have in vain two routes. I have the installation CD, it does not autoplay. I run Autoplay.exe in the root directory, I'm greeted, I choose English, I accept the EULA, I get the choice window Install / explores, with the install button already selected, click the button in Photoshop, CD towers, and nothing happens. In the 2^nd attempt I run Setup.exe in the directory of Photoshop and nothing happens at all the. I'm never even offered the opportunity to enter my product code. What should I do?

  There is probably a problem of compatibility between the old software and the more recent operating system.

• Root folder of models recognised only by the Site outside folder (Help!)

  I'm a web designer from early currently enrolled in a college class. For my last, I turn to a website built in Dreamweaver. The problem I've been meeting lately, is that my models folder is recognized only when directly outside the root instead of havoc in the Interior and it's on my design. Y at - it an easy solution, a dummy like me considered yet?

  I use my desktop computer as root folder right now if his: C:\Users\[username]\Desktop\

  Is that what you meant?

  EDIT: So, it seems I was aiming for the outside of the case, leaving the name of the root folder. Thanks for help.

• Strange and deadly file name / folder of the root problem. Help, please!

  Hello. I wonder if someone could help me!
  
  I'm on CS4, but this problem has happened yet in CS3. When I created a new site in Dreamweaver, I go through the usual motions by selecting the local root folder and the images folder. Then when I go to the new site how to create a cache of the original site as usual. After that (when I try to download anything for example) the cache seems to have disappeared (for example all files disappear them in DW). He told me that I should go through the implementation of the process of site once again, but this only ends up going round in circles!
  
  Curiously, when I look at my HD in the finder, Dreamweaver has created a new folder named "Macintosh HD" and inside follows the same structure of exact file that 'real' local files unless the Web site files do not exist in the root folder.
  
  I don't understand what is happening here. I suspect that it is perhaps something to do with the locations of files and relative / absolute which connects to the hard drive?
  
  Please help if you can! Thank you.

  > My hard drive is named "Macintosh HD" and a path in the example would be:
  >
  > Macintosh HD/users/mike/Documents/Local Sites/Jukebox

  What is a real exact path to a local site folder?

  Are there "funky" characters as empty space left in the hd
  name, or a sign of punctuation or above ascii in a folder name?

  Please follow these steps:
  Open a new empty html file using the file-> new
  --> do not save this file<>

  Type some text in Design view
  Select the text, and then create a link to this site "homepage" file using the
  link icon of the folder in the property inspector

  View code and copy the code from this link and paste it into the answer.
  It should be a local absolute path as
  file:///harddrivename/users/username/folder/folder/index.html

  Adobe technote on file names or folder in mac os break features:

  http://KB.Adobe.com/selfservice/viewContent.do?externalId=tn_14452

  --
  Alan
  Adobe Community Expert, dreamweaver

  http://www.Adobe.com/communities/experts/

• After you turn off the root of the directory utility user, I went back to the main screen and all other user accounts showed is no longer at the start, as they were before you enable the root user.  Help.  Please, I beg you.

  I have activated the user 'root '.  It was an attempt (for the sake of granddaughter age) to check its history since I am the administrator.  Realizing that this method was much more complicated than what I am capable of managing, I returned the utility program directory and disabled the user 'root '.  I thought that everything was ok, as I did not made anything while connected as user 'root '.  Instead, restart the computer, all users, including myself were no longer at the start.  The only point was a blank user name and password.  No picture.  No guest.  No user.  How to return those and I did something to cause this?

  Else you being logged in as root?

  Activation and deactivation, then root should not have caused that.

  Also, having allowed root is one of the ways you get a login screen showing only the name and the password.

  You should be able to type in your user name and password to connect.

  One time connected, check users & groups system prefs, Connection Options and make sure he's on the list of users. You will have to click on the padlock at the bottom to make changes.

• 4 days ago, I asked if someone could help with a VIRUS of ROOT KIT in 8. What about the root kit advice at all?

  Microsoft technical support does not have to deal with such a question of virus it early- and the whole reason I tried Windows 8 was to see if I could work to use it. The virus just kept hit me offline on others so I wasn't able to work for more than 40 days!

  Of course, this strategy has worked and I'm beginning to really love 8. But I have installed and reinstalled XP, Vista and 7, so many times trying to control this thing all my files are backup players. The line at the bottom is so, does anyone have solid advice on how to get rid of a kit root on ANY operating system, IE one makes it easier than the other, and how do you get rid of a virus of root? They are invisible to all except unix software.
  Thanks for all the ideas,
  Tom

  Microsoft technical support does not have to deal with such a question of virus it early- and the whole reason I tried Windows 8 was to see if I could work to use it. The virus just kept hit me offline on others so I wasn't able to work for more than 40 days!

  Of course, this strategy has worked and I'm beginning to really love 8. But I have installed and reinstalled XP, Vista and 7, so many times trying to control this thing all my files are backup players. The line at the bottom is so, does anyone have solid advice on how to get rid of a kit root on ANY operating system, IE one makes it easier than the other, and how do you get rid of a virus of root? They are invisible to all except unix software.

  
  Thanks for all the ideas,

  Tom

  Low level formatting (zero / filling/zero-write) to aid diagnosis and utilities bootable from the hard drive manufacturer.  Install your operating system, your application antivirus and anti malicious app of choice.  Computer practice of common sense.

• A500 will not start loading Logo Android guard, never rooted always Stock Please Help

  My son has tried many password twice and locked our tablet. I tried a few steps on the hard reset and now it shows Anroid on the screen, then turns off, then goes back to the Android screen stuck in a boot loop that follows. It will never start. I have a card in it but its Blanck and it seems that is where the restoration seeks to draw. Please can someone help me with this on the acquire reloaded and return to stock. Thank you.

  You need to format the Tablet again.

  Press the volume low botton and bttm power at the same time when the Tablet vibrates release the displaced volume due to the orientation of the screen from one side to the other, when the little letter come release all funds and do a factory reset.

  If this does not work, lets say when you lock the unit with the password after that 30 minutes, it will come out to you to try again.  If something happened to send it to the service.  Be aware that this may be a reason for 1000 even a bad MB.

  Good luck

• I tried to reinstall windows xp on my computer and I got a message &#60; root windows &#62; \systems32\hal.dll. I tried to use a disc of windows xp cd and nothing works for me. my pc came with windows pre-installed on it btw. can someone help me fix it

  I tried the suggestion on the error message and nothing works

  Hi Honee,

  Please, try the following.

  You must boot your PC with the XP cd-rom Setup disk, if you have
  one.

  Then, when you get to the screen with the following option appears:

  To repair a Windows XP installation using
  Recovery Console, press R.

  Then press [R] to launch the "Recovery Console".

  When confronted by a prompt asking for the administrator password - just
  Press [ENTER]

  After his start in RC - type the following command:

  Expand x:\i386\hal.dl_ c:\windows\system32\hal.dll

  (where [x] is the letter of your cd drive)

  * NB If SP3 is installed - then the command that you type must be:

  Copy c:\windows\ServicePackFiles\i386\hal.dll c:\windows\system32

  ... instead, because the files are of two different levels of review
  (versions).

  Then restart.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have a mess of error. about microsoft Isatap adapter... plug and play id root\ * Isatap\0002 error tv-configmgrerr31 need help with drivers

  need help with this.is there a link for the drivers. The only changes to my system is a new modom.netgear wireless g54.thank you

  Hello

  (1) what is the complete error message you receive?

  (2) when exactly you get this error message?

  (3) how long have you been faced with this problem?

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  See the article below

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520

• HP Pavilion G6 2323sx: Please help me - unknown device (ROOT\STORLIB\0000

  Dear Sir/Madam,

  Nice day!

  Please help me about my problem in unknown device to my laptop.

  This problem appeared when I update my Windows 8.1 for Windows 10.

  Thanks in advance.

  

  @rieux_30,

  Hello and thanks for the display on the HP support forum.  What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.

  If this fails to solve the problem.  The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.

  Thanks again for posting and have a great day.