rotate the sceen #.

Similar Questions

• How to rotate the IPAD during installation (down key does not)

  Hi, I have an old 1st generation IPAD where the bottom 10% of the screen no longer works. I tried to reset the IPAD, but now I'm stuck on the screen "to accept the license. Is there a way to get around this? Can I rotate the screen at this time?

  Thank you

  Hi Icetbr,

  What a great iPad model you have there! If you already tried to change the orientation of the screen during the initial installation without success, then you will not be able to turn right there. But no worries. You may be able to activate the Zoom feature during the installation process that will allow you to access the agreement to license button. Also, given that you have problems with the display, you should consider having repaired to your Apple local store or service center. The steps and the links below will help you activate the Zoom feature as well as to get some great info to get your iPad repaired if you choose to.

  When you turn on your iPhone, iPad or iPod touch for the first time, you can quickly activate VoiceOver or Zoom for you help to set up your device. Here's how:

  Zoom
  To activate the Zoom, use three fingers and double-tap the screen.
  To increase the Zoom level, use three fingers to double - tap and hold, and then move your fingers upward or downward on the screen to increase or decrease the magnification.

  Use the accessibility features in iOS

  iPad Repair - screen damage

  Thank you for using communities of Apple Support. Have a great day.

• My iPhone 6 s Plus the function to rotate the screen how this return

  My iPhone only more 6 used to rotate the screen, it is more the fact how this function returns

  Swipe up from the bottom of the screen to bring up the control center. Then press the icon that looks like a padlock inside a circular arrow. https://support.Apple.com/en-us/HT204547

  -AJ

• Satellite L450 - Win7 how to rotate the screen?

  Hi guys please help

  I don't know what my 5 year old niece pressed during playback on this platform, but she managed to rotate the office upstairs on the right, so start it s on the side, ok on the post screen, tried the system restore, but it says a file is missing and could not complete this am of course has nothing to do with my little problem that's for later, thanks

  Hello

  I put t know if this will help but check please follow thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=121049

  Please post comments.

• Pre-sales question: how to rotate the old video files

  Hello, I can't find my answer via google.

  I would like to run some very old phone videos taken vertically, but horizontally play.  There are still more some video files vertical I want to compress to a more manageable size.  I have an older version of the compressor that does not work with Yosemite.  The new version will manage the videos for me?

  Thank you.

  N °

  I would use a NLE like final cut PRO, QUickTime Player, or MPEG Streamclip to rotate the clips.

  Good luck.

  Russ

• rotate the document

  I have a HP Officejet Pro 8600. When scanning I frequently neet to rotate a multi-page document. How to turn the entire document at once rather than on a single page at a time.  Sam Bear1

  Hello-

  You can rotate the document in two ways:

  1. for the use of our scan software, you can use the Rotate button (see below). However, this requires you to click on each page, then rotate. Then save.

  2. When you open the original document saved with Adobe Reader, click on the view button, then "rotate the view. This will transform documents. Then save under.

  I hope this helps.

  

• Rotate the Plot chart legend of XY

  Is it possible to rotate the legend of the plot for the plot names letters run from the bottom to the top rather than in the whole of the operator interface?

  The names of my plots are bigger and I need to show at least four plots at the same time. Put the scales to the right/left/above or below without rotating can cause a short XY Chart!

  Any ideas for me?

  Concerning

  Waris K

  Hello

  I don't know if there is a native way to do it, but you can 'cheat' to do this:

  

  You can move the table where the captions are, or even make the table turn into lines instead of the column.

  Is the idea ok for you?

• How to rotate the elements of façade of way in clockwise and anti-clockwise?

  I want to rotate the component of the front panel in a counterclockwise manner / clockwise, for example, if I place a square led on the front panel, how I was I able to turn it?

  To do this just to resize the led vertically and horizontally and align the seven segment. You can't really need to turn the indicator for that.

• Rotate the names Net and Bus

  1. is there a way to rotate the net names and/or names of bus to follow the thread if it slides vertically? The shift/R command does not work. (Version 10.1 Power Pro).

  2. names may be off grid? There is no reason to snap a name to the grid. There are times when the name is crowded, or on an adjacent line. It seems very little professional and sloppy.

  Thanks for the help,

  Scotty544

  Scotty544,

  1 there is no support for rotated text (vertical) currently in v10.1.   The only support existing within components where you can rotate the name of pin (horiz/green), but this won't help you with the names of wiring.

  2. I agree with what you say with the net name labels - they don't behave well when rewire you / move threads.   You can lock, but if you move the wire or rewiring that they don't change very much at all.   For simulation work, I generally recommend leaving the net names enabled, however if you are planning to print your diagram for PCB layout purposes or documentation, you can universally turn labels (options-> properties sheet-> Circuit [tab]-> name [region]) and set it to 'Hide All' or 'using the specific setting Net '.   Note the use of the net specific parameter will force through the diagram, then choose threads are visible.

  Another thread of labelling approach...

  In general, I recommend the use of text (Ctrl + T) or observation points (location-> comment) to specific key within the circuit for documentation purposes.   Also, for the connections that need to go elsewhere (such an escape of connector), you can use the functionality of virtual wiring (netnames need all display or use Net specific setting) or you can use the external page (Place->-> stop Page Plug connectors) connector...   Page connector is typically used to connect to, of course, the connections off-page... If you place a link second off-page down and try to adjust the "RefDes" parameter to match the first manually - double-clicking a message will appear saying "all components must have unique benchmark indicators" and the action will be prevented... however it is a little trick that can be used to connect to the connectors on the same page.   When you place the second connector off-page down, go to the spreadsheet view and select the components tab.   On the first column named "Refdes" go down on the second connector that you want to copy the name to the net and just rename it to match the first.   Multisim will warn you when connect you 2 NET names together on the same page (but that's the idea)... so you can now have net "data0" connected to "data0' with a connector off specific page elsewhere in your design both external and within the page to other pages.  Also, you will have better control the alignment of text - and the label will move with the connector much better with straight wire labels...

  

  Also note that in general, we work to improve the wiring and the net labeling behavior.

  Kind regards
  Patrick Noonan
  Business Development Manager
  National Instruments - Electronics Workbench Group
  50 market St 1-
  South Portland, ME 04106
  Phone: 207 892-9130
  E-mail: [email protected]

• Possible to rotate the view on a .mov file in Windows Media Player?

  Is it possible to rotate a .mov file in Media Player?  I received several files which were filmed in reverse.

  No.... Windows Media Player cannot rotate a video.

  FWIW... the free VLC Media Player can turn
  files for display:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  After installing VLC open an it... then video and pause go to...
  Tools / effects and filters / video effects tab / geometry tab.
  Select the check box turn / slide the circle / close / play.

  If you want to rotate the video and save the rotation
  version... .the suite freeware can be worth a try:

  FreeMake Video Converter: How to rotate video
  http://www.Freemake.com/how_to/how_to_rotate_video

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download free video converter Freemake
  http://www.Freemake.com/free_video_converter/
  (Windows XP/Vista/7)

  More info...

  . Apple's Quicktime movie format is MOV...

  The Version of Apple Quicktime Pro retail can turn
  . MOV video clips.

  QuickTime Pro allows you to shoot movies
  http://www.gbradhopkins.com/archives/2005/02/use_quicktime_pro_to_rotate_mo.html

  Apple Quicktime Pro: Resize, pivot or rotation of a sequence
  http://docs.info.Apple.com/article.html?path=QuickTime%20Player%20Win/7.3/en/c3qt17.html

• I can't see changes in a folder unless I go up a level and then re-enter folder, for example, create new folder, rename the folder, rotate the image etc. Can someone please?

  I do not see changes within a folder, except if I go up a level and then again enter the folder, for example, create new folder, rename the folder, rotate the image, etc..

  By pressing the "F5" key would probably be to refresh the folder.

  See if this article helps you with this problem:

  "List of the files in the Windows Explorer folder is not refreshed after that you create, move, or delete files"
    <>http://support.Microsoft.com/kb/823291 >

  HTH,
  JW

• somehow my screen turned completely sideways, how to rotate the screen back to normal?

  somehow my screen turned completely sideways, how to rotate the screen back to normal?

  Use the Ctrl key or the Alt key with the arrow keys to rotate your screen to its normal position. You can also right-click an empty space on your desktop and in the context menu that appears look for the rotation of the screen, orientation, landscape, or something similar.

  Kind regards

• How to rotate the image in movie maker a few degrees to get it exactly horizontal

  If my camera was slightly off level during recording, how I rotate the image a few degrees in Movie Maker to get this level

  I found a copy of 1.9.2.

  Excellent

  Wayne

• How to rotate the screen back to normal

  my entire homepage or should I say everything is on the side and I can't get it back to normal!

  * original title - how to get my screan turn back to normal? *

  Hello

  Use the following key combination to rotate the screen.

  Press Ctrl + Alt keys and press either the arrow key left or right.

  Let us know the results.

  Kind regards.

• Rotate the fonts

  Hi, guys.

  Does anyone know is it possible to rotate the fonts?

  Police class has a method derived from

  public Font derive(int style, int height, int units, int antialiasMode,
  int effects, int[] transform)
  

  I suspect that the transform parameter should be responsible for turning.

  But in the javadoc is no information with regard to transformation of the values in table to rotate the font.

  Where can I find this information?

  Thank you.

  This is a very serious example of how to rotate the text.

  class StringSpinner extends MainScreen {
      Font myFont;
      int xOffset;
      int yOffset;
      int theta;
  
      public StringSpinner() {
          xOffset = Display.getWidth() / 2;
          yOffset = Display.getHeight() / 2;
  
          new Thread() {
              public void run() {
                  while(true) {
                      theta += 5;
                      theta %= 360;
                      invalidate();
  
                      try {
                          Thread.sleep(25);
                      }
                      catch (InterruptedException ignore) {
                      }
                  }
              }
          }.start();
      }
  
      public void paint(Graphics graphics) {
          int thetaFixed = Fixed32.toFP(theta);
  
          int cell_11 = Fixed32.cosd(thetaFixed);
          int cell_12 = -Fixed32.sind(thetaFixed);
  
          int cell_21 = Fixed32.sind(thetaFixed);
          int cell_22 = Fixed32.cosd(thetaFixed);
  
          int[] transform = new int[] {
            cell_11, cell_12,
            cell_21, cell_22,
            0, 0
          };
  
          myFont = Font.getDefault().derive(Font.PLAIN, 14, Ui.UNITS_px, Font.ANTIALIAS_STANDARD, 0, transform);
  
          graphics.setFont(myFont);
          graphics.drawText("Weeee!!!", xOffset, yOffset);
      }
  }